Synthesis and properties of branched polyethylene/high-density polyethylene blends using a homogeneous binary catalyst system composed of early and late transition metal complexes

Branched polyethylene/high-density polyethylene blends (BPE/HDPE) with a wide range of molecular weights, melt flow indexes (MFI), and intrinsic viscosity were prepared using the homogeneous binary catalyst system composed by Ni(alpha-diimine)Cl-2 (1) (alpha-diimine = 1,4-bis(2,6-diisopropylphenyl)-acenaphthenediimine) and {Tp(Ms*)} TiCl3 (2) (Tp(Ms*)=hydridobis(3-mesitylpyrazol-1-yl)(5-mesityl-pyrazol-1-yl)) activated with MAO and/or TIBA in hexane at two different polymerization temperatures (30 and 55 degreesC) and by varying the nickel loading molar fraction (x(Ni)). At all Temperatures, a non-linear correlation between the x(Ni) and the productivity was observed, suggesting the occurrence of a synergistic effect between the nickel and the titanium catalyst precursors, which is more pronounced at 55 degreesC. The molecular weight of the BPE/HDPE blends considerably decreases with increasing Al/M molar ratio. The melt flow indexes (MFI) and intrinsic viscosities (eta) are strongly affected by x(Ni), but the melting temperatures are nearly constant, 132 +/- 3 degreesC. Dynamic mechanical thermal analysis (DMTA) shows the formation of different polymeric materials where the stiffness vanes according, to the x(Ni) and temperature used in the polymerization reaction. The surface morphology of the BPE/HDPE blends studied by scanning electron microscopy (SEM) revealed a low miscibility between the PE phases resulting in the formation of a sandwich structure after etching with o-xylene.

Microwave synthesis of calcium bismuth niobate thin films obtained by the polymeric precursor method

The crystal structure, surface morphology and electrical properties of layered perovskite calcium bismuth niobate thin films (CaBi2Nb2O9-CBN) deposited on platinum coated silicon substrates by the polymeric precursor method have been investigated. The films were crystallized in a domestic microwave and in a conventional furnace. X-ray diffraction and atomic force microscopy analysis confirms that the crystallinity and morphology of the films are affected by the different annealing routes. Ferroelectric properties of the films were determined with remanent polarization P-r and a drive voltage V-c of 4.2 mu C/cm(2) and 1.7 V for the film annealed in the conventional furnace and 1.0 mu C/cm(2) and 4.0 V for the film annealed in microwave furnace, respectively. A slight decay after 10(8) polarization cycles was observed for the films annealed in the microwave furnace indicating a reduction of the domain wall mobility after interaction of the microwave energy with the bottom electrode. (C) 2006 Elsevier Ltd. All rights reserved.

Use of Yucca schidigera extract in broiler diets and its effects on performance results obtained with different coccidiosis control methods

A trial was conducted to assess the effects of the dietary supplement Yucca schidigera extract on the performance of broilers subjected to different coccidiosis control methods. Six hundred male broiler chicks were randomly allocated to 1 of 5 treatments with 4 replicates each. The treatments were as follows: T1, vaccinated against coccidiosis; T2, nonvaccinated, a dietary coccidiostat; T3, vaccinated against coccidiosis, diet supplemented with Y. schidigera extract (0.01%); T4, coccidiostat plus Y. schidigera extract added to feed (0.01%); and T5, nonvaccinated, nonsupplemented control. The parameters analyzed were bird performance and morphology of the intestinal mucosal surface. The intestinal villi were higher at 6 d of age in broilers treated with coccidiostats or vaccinated against coccidiosis and supplemented with Y. schidigera extract compared with groups receiving the vaccine only or no treatment. Addition of the Y. schidigera extract to the diet of vaccinated birds improved average daily gain and feed conversion rate at 42 d of age compared with the other treatments, suggesting there might be a beneficial, synergistic effect between the coccidiosis vaccine and the Y. schidigera extract.

Microstructural and morphological analysis of pure and Ce-doped tin dioxide nanoparticles

Structural morphological studies in pure and Ce-doped tin dioxide nanoparticles with high stability against particle growth were performed in samples, obtained using the polymeric precursor method and prepared at different annealing temperatures. A Ce-rich surface layer was used to control the particle size and stabilize SnO2 against particle growth. The formation of this segregated layer can contribute to a decreased surface energy, acting in the driving force, or reducing the surface mobility. Only the cassiterite SnO2 phase was observed below 1000 degreesC and a secondary phase (CeO2) was observed for the Ce-doped SnO2 at temperatures higher than 1000 degreesC, when de-mixing process occurs. The evolution of crystallite size, microstrain and morphology of the nanoparticles with annealing temperatures was investigated by X-ray diffraction (XRD), associated to Rietveld refinements, X-ray photoelectron spectroscopy (XPS) and transmission electron microscopy (TEM). (C) 2002 Elsevier B.V. Ltd. All rights reserved.

Preparation of 9/65/35 PLZT thin films deposited by a dip-coating process

Crack-free polycrystalline PLZT (Pb,a)(Zr,Ti)O-3 thin films with the perovskite structure were prepared by dir-coating using the Pechinis process. Lead acetate, hydrated lanthanum carbonate, zirconium n-propoxide and titanium isopropoxide were used as raw materials. The viscosity of the solution was adjusted in the range of 20 to 56 cP and the films were deposited by a dip-coating process on silicon (100) as substrate. Solutions with ionic concentration of 0.1 and 0.2 M were used. Thin film deposition was accomplished by dipping the substrates in the solution with control of withdrawal speed from 5 to 20 mm/min. The thin films were thermally treated in two steps: at 300 degreesC amid 650 degreesC. The influence of withdrawal speed. viscosity, heating rate and ionic concentration on the morphology of PLZT thin film was discussed. (C) 2001 Elsevier B.V. Ltd. All rights reserved.

Synthesis, growth process and photoluminescence properties of SrWO4 powders

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Chromosomal differentiation of Hyla nana and Hyla sanborni (Anura, Hylidae) with a description of NOR polymorphism in H-nana

Specimens of Hyla nana and Hyla sanborni from a syntopic population were studied cytogenetically. These species are morphologically very similar and are frequently misidentified, confused with each other. Both species had a diploid chromosome number, 2n = 30. However, the karyotypes of H. nana and H. sanborni differed considerably from each other in the number of submetacentric and telocentric chromosomes. The two species also differed in their primary NOR-bearing chromosomes (metacentric pair 13 in H. nana and telocentric pair 12 in H. sanborni). Additional nucleolus organizer regions (NORs) were detected by Ag-NOR staining and FISH in chromosome pairs 1, 5, 6, 12, and 14 in seven specimens of H. nana. Thus, a total of six patterns of NOR were identified. These differences in karyotype and in NOR location allowed the unambiguous identification of syntopic individuals of the two species. However, the chromosomal morphology of both species differed from that reported for populations from other geographic regions, suggesting that a systematic reevaluation of this group of Hyla may be necessary.

Modification of surface properties of Ti-16Si-4B powder alloy by plasma immersion ion implantation

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Controlled growth of anodic aluminium oxide films with hexagonal array of nanometer-sized pores filled with textured copper nanowires

Anodic aluminium oxide (AAO) films exhibiting a homogeneous morphology of parallel pores perpendicular to the surface were prepared in a two-step anodization process and filled with copper by electrochemical deposition. The optimum growth conditions for the formation of freestanding AAO films with hexagonal compact array of cylindrical pores were studied by field emission scanning electron microscopy and small angle X-ray scattering. The results show well-defined periodic structures with uniform pores size distribution for films with pore diameters between 40 and 70 nm prepared using different voltages and temperatures during the second anodization step. X-ray photoelectron spectroscopy and X-ray diffraction analysis of AAO films filled with copper show the formation of nanowires with high structural order, exhibiting a preferential crystalline orientation along the (2 2 0) axis and only small fraction of copper oxides. The best results for textured Cu nanowires were obtained at a reduction potential of -300 mV. (C) 2009 Elsevier Ltd. All rights reserved.

Reproductive Strategies of Brazilian Lizards of the Genus Tropidurus Rodrigues, 1987 (Squamata, Tropiduridae) in the Temporal and Spatial

Reproductive strategy is the set of adaptations that promote the most efficient way that the species will survive under the particular conditions of a determined environment. Understanding these adaptations is important and can help pinpoint populations indicator of environmental changes. Spermatogenesis is a measurable biological process of these adaptations in spatial and temporal scales. We analyzed the morphology of the testes and oviducts of the lizard species that comprise the genus Tropidurus, taking into account the geographical distribution and sympatric relations. For the analysis and the testes were removed from the middle part of the oviducts from Tropidurus etheridge, T oreadicus, T itambere, T spinulosus and T Guarani species, collected in different places in the Mato Grosso state, Brazil. The reproductive period is synchronous for males and females and occurs in September, October and November. Reproductive males were characterized. In the testes are seminiferous tubules with germ cells at different stages of spermatogenesis, with a high epithelium, at present light, free spermatozoa in the lumen and reduction of interstitial tissue. For females, the reproduction peak occurs when the oviduct epithelium is high with secretions and basal nucleus. These months are characterized in the sampled areas over a period of heavy rain and high temperatures. The decline of reproductive period was observed in both sexes, between April and August. Low reproduction in males is characterized by ample light, absence of sperm, only germ cells in the early stages of spermatogenesis are observed (a few spermatogonia and spermatocytes) and interstitial tissue wide. In females, the period of reproductive decline is marked by the absence of unicellular glands in the oviduct epithelium, with higher affinity with the dye. This period corresponds to low rainfall periods and lower temperatures. We propose an analysis of zoological samples; this is a proposal to facilitate the work of many researchers through access to the species, especially rare species.

Reflux synthesis and hydrothermal processing of ZrO2 nanopowders at low temperature

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

A new synonym, a new male description and new geographical records for three Ceraeochrysa species (Neuroptera: Chrysopidae)

Ceraeochrysa Adams is the largest genus in Chrysopini with 62 valid species distributed in the New World. The taxonomy of this group is complex and largely based on male genitalic characters. There are still serious complications, especially with the species that have been described solely from female specimens. The male of C. montoyana (Navas, 1913), unknown previously, is herein described for the first time, and compared with its closest relative, C. claveri (Navas, 1911). Ceraeochrysa acutipuppis Adams & Penny, 1985 is designated as a junior synonym of C. fairchildi (Banks, 1946) based on the evidence that both species share external morphological features uncommon in other species of the genus. The species C. claveri, C. fairchildi and C. montoyana are recorded from Venezuela for the first time. External morphology and genitalia of these insects are described and illustrated.

Morphological, mechanical properties and biodegradability of biocomposite thermoplastic starch and polycaprolactone reinforced with sisal fibers

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

THE TADPOLE of PHYSALAEMUS MOREIRAE (ANURA: LEIUPERIDAE)

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Structural and ultrastructural characterization of the embryonic development of Pseudoplatystoma spp. hybrids

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)