Incorporation of spiritual care as a component of healthcare and medical education: comparison of viewpoints of healthcare providers from a rural community hospital in Uganda with those of medical students from United Kingdrom

This study addresses cultural differences regarding views on the place for spirituality within healthcare training and delivery. A questionnaire was devised using a 5-point ordinal scale, with additional free text comments assessed by thematic analysis, to compare the views of Ugandan healthcare staff and students with those of (1) visiting international colleagues at the same hospital; (2) medical faculty and students in United Kingdom. Ugandan healthcare personnel were more favourably disposed towards addressing spiritual issues, their incorporation within compulsory healthcare training, and were more willing to contribute themselves to delivery than their European counterparts. Those from a nursing background also attached a greater importance to spiritual health and provision of spiritual care than their medical colleagues. Although those from a medical background recognised that a patient’s religiosity and spirituality can affect their response to their diagnosis and prognosis, they were more reticent to become directly involved in provision of such care, preferring to delegate this to others with greater expertise. Thus, differences in background, culture and healthcare organisation are important, and indicate that the wide range of views expressed in the current literature, the majority of which has originated in North America, are not necessarily transferable between locations; assessment of these issues locally may be the best way to plan such training and incorporation of spiritual care into clinical practice.

Combining environmental and medical datasets to explore potential associations between environmental factors and health: Policy implications for human health risk assessments

This review paper discusses the use of Tellus and Tellus Border soil and stream geochemistry data to investigate the relationship between medical data and naturally occurring background levels of potentially toxic elements (PTEs) such as heavy metals in soils and water. The research hypothesis is that long-term low level oral exposure of PTEs via soil and water may result in cumulative exposures that may act as risk factors for progressive diseases including cancer and chronic kidney disease. A number of public policy implications for regional human health risk assessments, public health policy and education are also explored alongside the argument for better integration of multiple data sets to enhance ongoing medical and social research. This work presents a partnership between the School of Geography, Archaeology and Palaeoecology, Northern Ireland Cancer Registry, Queen’s University Belfast, and the nephrology (kidney medicine) research group.

Wearable antennas for medical monitoring systems

A wearable silver nano particle inkjet printed antenna suitable for wireless biomedical sensing is presented. The performance is evaluated on a synthetic variable layered phantom test-bed, representative of human tissue for operation in the 868/915 MHz, and 2400 MHz industrial, scientific and medical frequency bands. Antenna radiation efficiency measurements on the phantom were compared with antennas prototyped with copper. Total radiation efficiencies up to ???6.5 dB are reported, with less than 0.5 dB difference in performance between copper and silver nano particle variants, showing promising application for low-cost disposable wireless sensing.

Inferring and Exploiting Categories for Next Location Prediction

Predicting the next location of a user based on their previous visiting pattern is one of the primary tasks over data from location based social networks (LBSNs) such as Foursquare. Many different aspects of these so-called “check-in” profiles of a user have been made use of in this task, including spatial and temporal information of check-ins as well as the social network information of the user. Building more sophisticated prediction models by enriching these check-in data by combining them with information from other sources is challenging due to the limited data that these LBSNs expose due to privacy concerns. In this paper, we propose a framework to use the location data from LBSNs, combine it with the data from maps for associating a set of venue categories with these locations. For example, if the user is found to be checking in at a mall that has cafes, cinemas and restaurants according to the map, all these information is associated. This category information is then leveraged to predict the next checkin location by the user. Our experiments with publicly available check-in dataset show that this approach improves on the state-of-the-art methods for location prediction.

Implications of aligning full registration of doctors with medical school graduation:a qualitative study of stakeholder perspectives

OBJECTIVES: The Shape of Training report recommended that full registration is aligned with medical school graduation. As part of a General Medical Council-funded study about the preparedness for practice of UK medical graduates, we explored UK stakeholders' views about this proposal using qualitative interviews (30 group and 87 individual interviews) and Framework Analysis.

SETTING: Four UK study sites, one in each country.Save

PARTICIPANTS: 185 individuals from eight stakeholder groups: (1) foundation year 1 (F1) doctors (n=34); (2) fully registered trainee doctors (n=33); (3) clinical educators (n=32); (4) undergraduate/postgraduate Deans, and Foundation Programme Directors (n=30); (5) other healthcare professionals (n=13); (6) employers (n=7); (7) policy and government (n=11); (8) patient and public representatives (n=25).

RESULTS: We identified four main themes: (1) The F1 year as a safety net: patients were protected by close trainee supervision and 'sign off' to prevent errors; trainees were provided with a safe environment for learning on the job; (2) Implications for undergraduate medical education: if the proposal was accepted, a 'radical review' of undergraduate curricula would be needed; undergraduate education might need to be longer; (3) Implications for F1 work practice: steps to protect healthcare team integration and ensure that F1 doctors stay within competency limits would be required; (4) Financial, structural and political implications: there would be cost implications for trainees; clarification of responsibilities between undergraduate and postgraduate medical education would be needed. Typically, each theme comprised arguments for and against the proposal.

CONCLUSIONS: A policy change to align the timing of full registration with graduation would require considerable planning and preliminary work. These findings will inform policymakers' decision-making. Regardless of the decision, medical students should take on greater responsibility for patient care as undergraduates, assessment methods in clinical practice and professionalism domains need development, and good practice in postgraduate supervision and support must be shared.

Peer tutoring in a medical school: perceptions of tutors and tutees

Background: Peer tutoring has been described as “people from similar social groupings who are not professional teachers helping each other to learn and learning themselves by teaching”. Peer tutoring is well accepted as a source of support in many medical curricula, where participation and learning involve a process of socialisation.
Peer tutoring can ease the transition of the junior students from the university class environment to the hospital workplace. In this paper, we apply the Experienced Based Learning (ExBL) model to explore medical students’ perceptions of their experience of taking part in a newly established peer tutoring program at a hospital based
clinical school.
Methods: In 2014, all students at Sydney Medical School – Central, located at Royal Prince Alfred Hospital were invited to voluntarily participate in the peer tutoring program. Year 3 students (n = 46) were invited to act as tutors for Year 1 students (n = 50), and Year 4 students (n = 60) were invited to act as tutors for Year 2 students (n = 51). Similarly, the ‘tutees’ were invited to take part on a voluntary basis. Students were invited to attend focus groups, which were held at the end of the program. Framework analysis was used to code and categorise data into themes.
Results: In total, 108/207 (52 %) students participated in the program. A total of 42/106 (40 %) of Year 3 and 4 students took part as tutors; and of 66/101 (65 %) of Year 1 and 2 students took part as tutees. Five focus groups were held, with 50/108 (46 %) of students voluntarily participating. Senior students (tutors) valued the opportunity to practice and improve their medical knowledge and teaching skills. Junior students (tutees) valued the opportunity for additional practice and patient interaction, within a relaxed, small group learning environment.
Conclusion: Students perceived the peer tutoring program as affording opportunities not otherwise available within the curriculum. The peer teaching program provided a framework within the medical curriculum for senior students to practice and improve their medical knowledge and teaching skills. Concurrently, junior students were provided with a valuable learning experience that they reported as being qualitatively different to traditional teaching by faculty.

The Effect of Seat Location in Lecture Theatres on Academic Performance

The purpose of this research study was to investigate and identify possible patterns relating to academic performance on the effects of university students self-selecting where to sit in a lecture theatre.
The key research questions are:
1. Does seating position affect student performance?
2. Do the most academically able and engaged students regularly sit at the front of lecture theatres?
Academic achievement
Preliminary results suggest significant assessment score differences between those that sit at the front and those that sit further the back. Of those that received a grade of 75%+ (Grade A) 6.67% regularly sat at the back. With the same group 46.67% regularly sat at the front. Of the group that scored less than 50% (Grade D) 0% of students regularly sat at the front. 12.50% regularly sat in the middle zones with 37.50% sitting at the back. It was also observed that the remaining numbers did not consistently sit in the same zone.

Temporal movement
There is little evidence of movement between seating zones of the Grade A group throughout the 24 week period. However there was considerable movement with the Grade D group. Although still under analysis there appears be a pattern of students in this group graduating towards the back seating positions over the course of the programme.

Engagement
The frequency of completed entries on PinPoint was also used as an indicator of engagement. With the Grade A group 75% of them regularly completed an entry whereas in the Grade D group this drops to less than 50%.
Further analysis on the attitudinal factors in relational to seating position and performance are ongoing, but preliminary results suggest that those students that scored highly in attitude tended to sit at the front and middle sections.
It would indeed appear that the more highly engaged and academically capable students voluntarily sit at the front for most lectures. Interestingly as the course progresses those who had lesser engagement and below average midterm results tend to began to sit progressively toward the back. If this is a repeatable pattern then a linear regression analysis of the seating positions and midterm results could help predict students in danger of failing.

Fibre laser joining of highly dissimilar materials: Commercially pure Ti and PET hybrid joint for medical device applications

Laser transmission joining (LTJ) is growing in importance, and has the potential to become a niche technique for the fabrication of hybrid plastic-metal joints for medical device applications. The possibility of directly joining plastics to metals by LTJ has been demonstrated by a number of recent studies. However, a reliable and quantitative method for defining the contact area between the plastic and metal, facilitating calculation of the mechanical shear stress of the hybrid joints, is still lacking. A new method, based on image analysis using ImageJ, is proposed here to quantify the contact area at the joint interface. The effect of discolouration on the mechanical performance of the hybrid joints is also reported for the first time. Biocompatible polyethylene terephthalate (PET) and commercially pure titanium (Ti) were selected as materials for laser joining using a 200 W CW fibre laser system. The effect of laser power, scanning speed and stand-off distance between the nozzle tip and top surface of the plastic were studied and analysed by Taguchi L9 orthogonal array and ANOVA respectively. The surface morphology, structure and elemental composition on the PET and Ti surfaces after shearing/peeling apart were characterized by SEM, EDX, XRD and XPS.

Laser-fabricated PET-Ti Hybrid Joints for Medical Device Applications

Currently, micro-joining of plastic parts to metal parts in medical devices is achieved by using medical adhesives, For example, pacemakers, defibrillators and neurological stimulators are designed using silicone adhesive to seal the joint between the polyurethane connector module and the titanium can [1]. Nevertheless, the use of adhesive is problematic because it requires a long time to cure and has high tendency to produce leachable products which might be harmful to the human body. An alternative for directly joining plastics to metal without adhesive is therefore required. Laser transmission joining (LTJ) is growing in importance, and has the potential to gain the niche in micro-fabrication of plastics-metal hybrid joints for medical device applications. The possibility of directly joining plastics to metal by LTJ technique have been demonstrated by a number of studies in recent literature [2]. The widely-accepted understanding of LTJ between plastics and metal is that generation and rapid expansion of micro-bubbles at the plastics-metal interface exert high local pressure to press the melted plastics towards the metal surface features during the laser processing [2]. This subsequently creates the plastics-metal hybrid joint by the mechanisms of mechanical interlocking as well as chemical and physical bonds between the plastics and metal surfaces. Although the micro-bubbles can help promote the mechanical interlocking effect to increase the joint strength, the creation of bubble is a random and complex process depending on the complicated interactions between the laser intensity, thermal degradation properties of plastics, surface temperature and topographical features of metal. In an ideal situation, it is desirable to create the hybrid plastics-metal joint without bubbles. However, the mechanical performance of the hybrid plastics-metal joint without bubbles is still unknown, and systematic comparison between the hybrid joints with and without bubbles is lacking in literature. This becomes the objective of this study. In this work, the laser process parameters were carefully chosen from a preliminary study, such that different hybrid joints: with and without bubbles can be produced and compared. Biocompatible PET and commercially pure Ti were selected as materials for laser joining.