Optimization of breast tomosynthesis image reconstruction using parallel computing

Breast cancer is the most common cancer among women, being a major public health problem. Worldwide, X-ray mammography is the current gold-standard for medical imaging of breast cancer. However, it has associated some well-known limitations. The false-negative rates, up to 66% in symptomatic women, and the false-positive rates, up to 60%, are a continued source of concern and debate. These drawbacks prompt the development of other imaging techniques for breast cancer detection, in which Digital Breast Tomosynthesis (DBT) is included. DBT is a 3D radiographic technique that reduces the obscuring effect of tissue overlap and appears to address both issues of false-negative and false-positive rates. The 3D images in DBT are only achieved through image reconstruction methods. These methods play an important role in a clinical setting since there is a need to implement a reconstruction process that is both accurate and fast. This dissertation deals with the optimization of iterative algorithms, with parallel computing through an implementation on Graphics Processing Units (GPUs) to make the 3D reconstruction faster using Compute Unified Device Architecture (CUDA). Iterative algorithms have shown to produce the highest quality DBT images, but since they are computationally intensive, their clinical use is currently rejected. These algorithms have the potential to reduce patient dose in DBT scans. A method of integrating CUDA in Interactive Data Language (IDL) is proposed in order to accelerate the DBT image reconstructions. This method has never been attempted before for DBT. In this work the system matrix calculation, the most computationally expensive part of iterative algorithms, is accelerated. A speedup of 1.6 is achieved proving the fact that GPUs can accelerate the IDL implementation.

The implementation of an Enterprise Geographical Information System to support Cadastre and Expropriation activities.

The processes of mobilization of land for infrastructures of public and private domain are developed according to proper legal frameworks and systematically confronted with the impoverished national situation as regards the cadastral identification and regularization, which leads to big inefficiencies, sometimes with very negative impact to the overall effectiveness. This project report describes Ferbritas Cadastre Information System (FBSIC) project and tools, which in conjunction with other applications, allow managing the entire life-cycle of Land Acquisition and Cadastre, including support to field activities with the integration of information collected in the field, the development of multi-criteria analysis information, monitoring all information in the exploration stage, and the automated generation of outputs. The benefits are evident at the level of operational efficiency, including tools that enable process integration and standardization of procedures, facilitate analysis and quality control and maximize performance in the acquisition, maintenance and management of registration information and expropriation (expropriation projects). Therefore, the implemented system achieves levels of robustness, comprehensiveness, openness, scalability and reliability suitable for a structural platform. The resultant solution, FBSIC, is a fit-for-purpose cadastre information system rooted in the field of railway infrastructures. FBSIC integrating nature of allows: to accomplish present needs and scale to meet future services; to collect, maintain, manage and share all information in one common platform, and transform it into knowledge; to relate with other platforms; to increase accuracy and productivity of business processes related with land property management.

Semantic enrichment of knowledge sources supported by domain ontologies

This thesis introduces a novel conceptual framework to support the creation of knowledge representations based on enriched Semantic Vectors, using the classical vector space model approach extended with ontological support. One of the primary research challenges addressed here relates to the process of formalization and representation of document contents, where most existing approaches are limited and only take into account the explicit, word-based information in the document. This research explores how traditional knowledge representations can be enriched through incorporation of implicit information derived from the complex relationships (semantic associations) modelled by domain ontologies with the addition of information presented in documents. The relevant achievements pursued by this thesis are the following: (i) conceptualization of a model that enables the semantic enrichment of knowledge sources supported by domain experts; (ii) development of a method for extending the traditional vector space, using domain ontologies; (iii) development of a method to support ontology learning, based on the discovery of new ontological relations expressed in non-structured information sources; (iv) development of a process to evaluate the semantic enrichment; (v) implementation of a proof-of-concept, named SENSE (Semantic Enrichment kNowledge SourcEs), which enables to validate the ideas established under the scope of this thesis; (vi) publication of several scientific articles and the support to 4 master dissertations carried out by the department of Electrical and Computer Engineering from FCT/UNL. It is worth mentioning that the work developed under the semantic referential covered by this thesis has reused relevant achievements within the scope of research European projects, in order to address approaches which are considered scientifically sound and coherent and avoid “reinventing the wheel”.

Determinants of mother-baby relationship evaluated during pregnancy

ABSTRACT Background Mental health promotion is supported by a strong body of knowledge and is a matter of public health with the potential of a large impact on society. Mental health promotion programs should be implemented as soon as possible in life, preferably starting during pregnancy. Programs should focus on malleable determinants, introducing strategies to reduce risk factors or their impact on mother and child, and also on strengthening protective factors to increase resilience. The ambition of early detecting risk situations requires the development and use of tools to assess risk, and the creation of a responsive network of services based in primary health care, especially maternal consultation during pregnancy and the first months of the born child. The number of risk factors and the way they interact and are buffered by protective factors are relevant for the final impact. Maternal-fetal attachment (MFA) is not yet a totally understood and well operationalized concept. Methodological problems limit the comparison of data as many studies used small size samples, had an exploratory character or used different selection criteria and different measures. There is still a lack of studies in high risk populations evaluating the consequences of a weak MFA. Instead, the available studies are not very conclusive, but suggest that social support, anxiety and depression, self-esteem and self-control and sense of coherence are correlated with MFA. MFA is also correlated with health practices during pregnancy, that influence pregnancy and baby outcomes. MFA seems a relevant concept for the future mother baby interaction, but more studies are needed to clarify the concept and its operationalization. Attachment is a strong scientific concept with multiple implications for future child development, personality and relationship with others. Secure attachment is considered an essential basis of good mental health, and promoting mother-baby interaction offers an excellent opportunity to intervention programmes targeted at enhancing mental health and well-being. Understanding the process of attachment and intervening to improve attachment requires a comprehension of more proximal factors, but also a broader approach that assesses the impact of more distal social conditions on attachment and how this social impact is mediated by family functioning and mother-baby interaction. Finally, it is essential to understand how this knowledge could be translated in effective mental health promoting interventions and measures that could reach large populations of pregnant mothers and families. Strengthening emotional availability (EA) seems to be a relevant approach to improve the mother-baby relationship. In this review we have offered evidence suggesting a range of determinants of mother-infant relationship, including age, marital relationship, social disadvantages, migration, parental psychiatric disorders and the situations of abuse or neglect. Based on this theoretical background we constructed a theoretical model that included proximal and distal factors, risk and protective factors, including variables related to the mother, the father, their social support and mother baby interaction from early pregnancy until six months after birth. We selected the Antenatal Psychosocial Health Assessment (ALPHA) for use as an instrument to detect psychosocial risk during pregnancy. Method Ninety two pregnant women were recruited from the Maternal Health Consultation in Primary Health Care (PHC) at Amadora. They had three moments of assessment: at T1 (until 12 weeks of pregnancy) they filed out a questionnaire that included socio-demographic data, ALPHA, Edinburgh post-natal Depression Scale (EDPS), General Health Questionnaire (GHQ) and Sense of Coherence (SOC); at T2 (after the 20th weeks of pregnancy) they answered EDPS, SOC and MFA Scale (MFAS), and finally at T3 (6 months after birth), they repeated EDPS and SOC, and their interaction with their babies was videotaped and later evaluated using EA Scales. A statistical analysis has been done using descriptive statistics, correlation analysis, univariate logistic regression and multiple linear regression. Results The study has increased our knowledge on this particular population living in a multicultural, suburb community. It allow us to identify specific groups with a higher level of psychosocial risk, such as single or divorced women, young couples, mothers with a low level of education and those who are depressed or have a low SOC. The hypothesis that psychosocial risk is directly correlated with MFAS and that MFA is directly correlated with EA was not confirmed, neither the correlation between prenatal psychosocial risk and mother-baby EA. The study identified depression as a relevant risk factor in pregnancy and its higher prevalence in single or divorced women, immigrants and in those who have a higher global psychosocial risk. Depressed women have a poor MFA, and a lower structuring capacity and a higher hostility to their babies. In average, depression seems to reduce among pregnant women in the second part of their pregnancy. The children of immigrant mothers show a lower level of responsiveness to their mothers what could be transmitted through depression, as immigrant mothers have a higher risk of depression in the beginning of pregnancy and six months after birth. Young mothers have a low MFA and are more intrusive. Women who have a higher level of education are more sensitive and their babies showed to be more responsive. Women who are or have been submitted to abuse were found to have a higher level of MFA but their babies are less responsive to them. The study highlights the relevance of SOC as a potential protective factor while it is strongly and negatively related with a wide range of risk factors and mental health outcomes especially depression before, during and after pregnancy. Conclusions ALPHA proved to be a valid, feasible and reliable instrument to Primary Health Care (PHC) that can be used as a total sum score. We could not prove the association between psychosocial risk factors and MFA, neither between MFA and EA, or between psychosocial risk and EA. Depression and SOC seems to have a clear and opposite relevance on this process. Pregnancy can be considered as a maturational process and an opportunity to change, where adaptation processes occur, buffering risk, decreasing depression and increasing SOC. Further research is necessary to better understand interactions between variables and also to clarify a better operationalization of MFA. We recommend the use of ALPHA, SOC and EDPS in early pregnancy as a way of identifying more vulnerable women that will require additional interventions and support in order to decrease risk. At political level we recommend the reinforcement of Immigrant integration and the increment of education in women. We recommend more focus in health care and public health in mental health condition and psychosocial risk of specific groups at high risk. In PHC special attention should be paid to pregnant women who are single or divorced, very young, low educated and to immigrant mothers. This study provides the basis for an intervention programme for this population, that aims to reduce broad spectrum risk factors and to promote Mental Health in women who become pregnant. Health and mental health policies should facilitate the implementation of the suggested measures.

A CMMI-compliant requirements management and development process

Requirements Engineering has been acknowledged an essential discipline for Software Quality. Poorly-defined processes for eliciting, analyzing, specifying and validating requirements can lead to unclear issues or misunderstandings on business needs and project’s scope. These typically result in customers’ non-satisfaction with either the products’ quality or the increase of the project’s budget and duration. Maturity models allow an organization to measure the quality of its processes and improve them according to an evolutionary path based on levels. The Capability Maturity Model Integration (CMMI) addresses the aforementioned Requirements Engineering issues. CMMI defines a set of best practices for process improvement that are divided into several process areas. Requirements Management and Requirements Development are the process areas concerned with Requirements Engineering maturity. Altran Portugal is a consulting company concerned with the quality of its software. In 2012, the Solution Center department has developed and applied successfully a set of processes aligned with CMMI-DEV v1.3, what granted them a Level 2 maturity certification. For 2015, they defined an organizational goal of addressing CMMI-DEV maturity level 3. This MSc dissertation is part of this organization effort. In particular, it is concerned with the required process areas that address the activities of Requirements Engineering. Our main goal is to contribute for the development of Altran’s internal engineering processes to conform to the guidelines of the Requirements Development process area. Throughout this dissertation, we started with an evaluation method based on CMMI and conducted a compliance assessment of Altran’s current processes. This allowed demonstrating their alignment with the CMMI Requirements Management process area and to highlight the improvements needed to conform to the Requirements Development process area. Based on the study of alternative solutions for the gaps found, we proposed a new Requirements Management and Development process that was later validated using three different approaches. The main contribution of this dissertation is the new process developed for Altran Portugal. However, given that studies on these topics are not abundant in the literature, we also expect to contribute with useful evidences to the existing body of knowledge with a survey on CMMI and requirements engineering trends. Most importantly, we hope that the implementation of the proposed processes’ improvements will minimize the risks of mishandled requirements, increasing Altran’s performance and taking them one step further to the desired maturity level.

A domain specific language for domotic systems

To cope with modernity, the interesting of having a fully automated house has been increasing over the years, as technology evolves and as our lives become more stressful and overloaded. An automation system provides a way to simplify some daily tasks, allowing us to have more spare time to perform activities where we are really needed. There are some systems in this domain that try to implement these characteristics, but this kind of technology is at its early stages of evolution being that it is still far away of empowering the user with the desired control over a habitation. The reason is that the mentioned systems miss some important features such as adaptability, extension and evolution. These systems, developed from a bottom-up approach, are often tailored for programmers and domain experts, discarding most of the times the end users that remain with unfinished interfaces or products that they have difficulty to control. Moreover, complex behaviors are avoided, since they are extremely difficult to implement mostly due to the necessity of handling priorities, conflicts and device calibration. Besides, these solutions are only reachable at very high costs, yet they still have the limitation of being difficult to configure by non-technical people once in runtime operation. As a result, it is necessary to create a tool that allows the execution of several automated actions, with an interface that is easy to use but at the same time supports all the main features of this domain. It is also desirable that this tool is independent of the hardware so it can be reused, thus a Model Driven Development approach (MDD) is the ideal option, as it is a method that follows those principles. Since the automation domain has some very specific concepts, the use of models should be combined with a Domain Specific Language (DSL). With these two methods, it is possible to create a solution that is adapted to the end users, but also to domain experts and programmers due to the several levels of abstraction that can be added to diminish the complexity of use. The aim of this thesis is to design a Domain Specific Language (DSL) that uses the Model Driven Development approach (MDD), with the purpose of supporting Home Automation (HA) concepts. In this implementation, the development of simple and complex scenarios should be supported and will be one of the most important concerns. This DSL should also support other significant features in this domain, such as the ability to schedule tasks, which is something that is limited in the current existing solutions.

Design, implementation, and performance of a distributed and scalable sensor system for critical distance measurements in the CMS detector at LHC

The “CMS Safety Closing Sensors System” (SCSS, or CSS for brevity) is a remote monitoring system design to control safety clearance and tight mechanical movements of parts of the CMS detector, especially during CMS assembly phases. We present the different systems that makes SCSS: its sensor technologies, the readout system, the data acquisition and control software. We also report on calibration and installation details, which determine the resolution and limits of the system. We present as well our experience from the operation of the system and the analysis of the data collected since 2008. Special emphasis is given to study positioning reproducibility during detector assembly and understanding how the magnetic fields influence the detector structure.

In-house ELISA method to analyze anti-Trypanosoma cruzi IgG reactivity for differential diagnosis and evaluation of Chagas disease morbidity

INTRODUCTION: The goal was to develop an in-house serological method with high specificity and sensitivity for diagnosis and monitoring of Chagas disease morbidity. METHODS: With this purpose, the reactivities of anti-T. cruzi IgG and subclasses were tested in successive serum dilutions of patients from Berilo municipality, Jequitinhonha Valley, Minas Gerais, Brazil. The performance of the in-house ELISA was also evaluated in samples from other relevant infectious diseases, including HIV, hepatitis C (HCV), syphilis (SYP), visceral leishmaniasis (VL), and American tegumentary leishmaniasis (ATL), and noninfected controls (NI). Further analysis was performed to evaluate the applicability of this in-house methodology for monitoring Chagas disease morbidity into three groups of patients: indeterminate (IND), cardiac (CARD), and digestive/mixed (DIG/Mix), based on their clinical status. RESULTS: The analysis of total IgG reactivity at serum dilution 1:40 was an excellent approach to Chagas disease diagnosis (100% sensitivity and specificity). The analysis of IgG subclasses showed cross-reactivity, mainly with NI, VL, and ATL, at all selected serum dilutions. Based on the data analysis, the IND group displayed higher IgG3 levels and the DIG/Mix group presented higher levels of total IgG as compared with the IND and CARD groups. CONCLUSIONS: These findings demonstrated that methodology presents promising applicability in the analysis of anti-T. cruzi IgG reactivity for the differential diagnosis and evaluation of Chagas disease morbidity.

Parasitological stool sample exam by spontaneous sedimentation method using conical tubes: effectiveness, practice, and biosafety

INTRODUCTION: Spontaneous sedimentation is an important procedure for stool examination. A modification of this technique using conical tubes was performed and evaluated. METHODS: Fifty fecal samples were processed in sedimentation glass and in polypropylene conical tubes. Another 50 samples were used for quantitative evaluation of protozoan cysts. RESULTS: Although no significant differences occurred in the frequency of protozoa and helminths detected, significant differences in protozoan cyst counts did occur. CONCLUSIONS: The use of tube predicts a shorter path in the sedimentation of the sample, increases concentration of parasites for microscopy analysis, minimizes the risks of contamination, reduces the odor, and optimizes the workspace.

A method to correct the flow distortion of offshore wind data using CFD simulation and experimental wind tunnel tests

The assessment of wind energy resource for the development of deep offshore wind plants requires the use of every possible source of data and, in many cases, includes data gathered at meteorological stations installed at islands, islets or even oil platforms—all structures that interfere with, and change, the flow characteristics. This work aims to contribute to the evaluation of such changes in the flow by developing a correction methodology and applying it to the case of Berlenga island, Portugal. The study is performed using computational fluid dynamic simulations (CFD) validated by wind tunnel tests. In order to simulate the incoming offshore flow with CFD models a wind profile, unknown a priori, was established using observations from two coastal wind stations and a power law wind profile was fitted to the existing data (a=0.165). The results show that the resulting horizontal wind speed at 80 m above sea level is 16% lower than the wind speed at 80 m above the island for the dominant wind direction sector.

Improving tuberculosis control through the partnership between university and the health system

INTRODUCTION: Tuberculosis (TB) control is linked to the availability of qualified methods for microbiological diagnostics; however, microscopy with limited sensitivity is the only method available in many locations. The objective of this study was to evaluate the introduction of culture, drug susceptibility testing (DST), and genotyping in the routine of a Municipal Program of Tuberculosis Control. METHODS: Direct microscopy of sputum and culture in Ogawa-Kudoh were performed on 1,636 samples from 787 patients. DST of positive cultures was performed by resazurin microtiter assay and genotyping by mycobacterial interspersed repetitive units-variable number tandem repeat. RESULTS: A total 91 patients with TB were identified. The culture increased case detection by 32% compared with the microscopy; acquired resistance was 3.3% and the genotyping showed high genetic diversity. CONCLUSIONS: Ogawa-Kudoh contributed significantly to the increase in case detection and is suitable for implementation in poor-resource locations. The acquired resistance rate was lower than that reported in a recent Brazilian survey. The high genetic diversity is possibly related to the high TB prevalence in the population, as well as to early detection and suitable treatment of patients. The interaction between research and health care is important for reorienting the practice, transferring technology, and improving TB control.

Evidence of market anomalies in the Eurozone: A practical implementation

A Work Project, presented as part of the requirements for the Award of a Master’s Double Degree in Finance and Financial Economics from NOVA – School of Business and Economics and Maastricht University

Almirante: Evaluating the board game: Board game, startup, discounted cash flow, venture capital method, real options

This thesis evaluates a start-up company (Jogos Almirante Lda) whose single asset is a board game named Almirante. It aims to conclude whether it makes sense to create a company or just earn copyrights. The thesis analyzes the board game’s market, as part of the general toy’s market, from which some data exists: European countries as well as the USA. In this work it is analyzed the several ways to finance a start-up company and then present an overview of the valuation of the Jogos Almirante based on three different methods: Discounted Cash Flow, Venture Capital Method and Real Options.

Contribution to a strategic plan for the implementation of continuous improvement process in an MRO

This Work Project studies the Continuous Improvement and Processes (CIP) department at TAP Maintenance & Engineering. The project has the objective to provide insights to align the activities of the department with the strategy of the organization. For such, two focuses were taken: (i) an internal analysis which highlighted a need for transversal change to ensure the adoption of Continuous Improvement at TAP, and (ii) a process which outlined objectives and projects to be pursued to prioritize CIP’s activities in accordance with the organization’s goals. The outcome includes (a) important recommendations concerning strategic planning and competition evaluation and (b) a process’ output that reflects a balance among factors influencing the priority of projects.

Fruta com cheiro: The implementation of a new brand of fruit in the Portuguese market

‘’Fruta com Cheiro’’ is an idea for a new brand of fruit that would be introduced in the Portuguese market that would differentiate itself from the brands already in the market and from other non-branded fruit producers. In order to prove that the idea was valid and would have a place in the market, two methods of exploratory research were used – in-depth interviews and focus groups – to understand attitudes and behaviors regarding fruit selection and purchase and also people’s perceptions to ‘’Fruta com Cheiro’’. After these two steps, several considerations were made in relation to preliminary marketing aspects such as brand creation and positioning. There was also a final remark on the fact that this thesis is not a business plan and its purpose was to show how viable would the project be.