Computational and Experimental Analysis of Flow Field in the Diffusers of Centrifugal Compressors

Centrifugal compressors are widely used for example in process industry, oil and gas industry, in small gas turbines and turbochargers. In order to achieve lower consumption of energy and operation costs the efficiency of the compressor needs to be improve. In the present work different pinches and low solidity vaned diffusers were utilized in order to improve the efficiency of a medium size centrifugal compressor. In this study, pinch means the decrement of the diffuser flow passage height. First different geometries were analyzed using computational fluid dynamics. The flow solver Finflo was used to solve the flow field. Finflo is a Navier-Stokes solver. The solver is capable to solve compressible, incompressible, steady and unsteady flow fields. Chien's k-e turbulence model was used. One of the numerically investigated pinched diffuser and one low solidity vaned diffuser were studied experimentally. The overall performance of the compressor and the static pressure distribution before and after the diffuser were measured. The flow entering and leaving the diffuser was measured using a three-hole Cobra-probe and Kiel-probes. The pinch and the low solidity vaned diffuser increased the efficiency of the compressor. Highest isentropic efficiency increment obtained was 3\% of the design isentropic efficiency of the original geometry. It was noticed in the numerical results that the pinch made to the hub and the shroud wall was most beneficial to the operation of the compressor. Also the pinch made to the hub was better than the pinchmade to the shroud. The pinch did not affect the operation range of the compressor, but the low solidity vaned diffuser slightly decreased the operation range.The unsteady phenomena in the vaneless diffuser were studied experimentally andnumerically. The unsteady static pressure was measured at the diffuser inlet and outlet, and time-accurate numerical simulation was conducted. The unsteady static pressure showed that most of the pressure variations lay at the passing frequency of every second blade. The pressure variations did not vanish in the diffuser and were visible at the diffuser outlet. However, the amplitude of the pressure variations decreased in the diffuser. The time-accurate calculations showed quite a good agreement with the measured data. Agreement was very good at the design operation point, even though the computational grid was not dense enough inthe volute and in the exit cone. The time-accurate calculation over-predicted the amplitude of the pressure variations at high flow.

Field performance of new cowpea cultivars inoculated with efficient nitrogen-fixing rhizobial strains in the Brazilian Semiarid

The objective of this work was to evaluate the contribution of efficient nitrogen-fixing rhizobial strains to grain yield of new cowpea cultivars, indicated for cultivation in the Brazilian Semiarid region, in the sub-medium of the São Francisco River Valley. Two experiments were set up at the irrigated perimeters of Mandacaru (Juazeiro, state of Bahia) and Bebedouro (Petrolina, state of Pernambuco). The treatments consisted of single inoculation of five rhizobial strains - BR 3267, BR 3262, INPA 03-11B, UFLA 03-84 (Bradyrhizobiumsp.), and BR 3299T(Microvirga vignae) -, besides a treatment with nitrogen and a control without inoculation or N application. The following cowpea cultivars were evaluated: BRS Pujante, BRS Tapaihum, BRS Carijó, and BRS Acauã. A randomized complete block design, with four replicates, was used. Inoculated plants showed similar grain yield to the one observed with plants fertilized with 80 kg ha-1 N. The cultivars BRS Tapaihum and BRS Pujante stood out in grain yield and protein contents when inoculated, showing their potential for cultivation in the sub-medium of the São Francisco River Valley.

Field data and prediction models of pesticide spray drift on coffee crop

The objective of this work was to generate drift curves from pesticide applications on coffee plants and to compare them with two European drift-prediction models. The used methodology is based on the ISO 22866 standard. The experimental design was a randomized complete block with ten replicates in a 2x20 split-plot arrangement. The evaluated factors were: two types of nozzles (hollow cone with and without air induction) and 20 parallel distances to the crop line outside of the target area, spaced at 2.5 m. Blotting papers were used as a target and placed in each of the evaluated distances. The spray solution was composed of water+rhodamine B fluorescent tracer at a concentration of 100 mg L-1, for detection by fluorimetry. A spray volume of 400 L ha-1 was applied using a hydropneumatic sprayer. The air-induction nozzle reduces the drift up to 20 m from the treated area. The application with the hollow cone nozzle results in 6.68% maximum drift in the nearest collector of the treated area. The German and Dutch models overestimate the drift at distances closest to the crop, although the Dutch model more closely approximates the drift curves generated by both spray nozzles.

Green Field fluteboard factory infrastructure requirements in Russia

Russian corrugated board market is rapidly developing. Owing to that Russia becomes more and more attractive to the companies ¿ world leaders in corrugated board production. Thus, in order to strengthen or even to maintain its market position the firm should uninterruptedly develop improving volume and quality of the products. At the same time operations in the Russian market are commonlyassociated with various types of risks which should be avoided. Unfortunately, the information of the Russian corrugated board market is not systematized yet there is almost no theoretical background in this areaand, therefore, the thesis is mainly based on the practical experience of the managers of Stora Enso. The goal of the paper is to define and describe the main particularities of Russian corrugated board market which are lying in different areas and to concentrate on the difficultieswith which a corrugated board factory may face while functioning in the Russian market. The contribution of the thesis consists of forming general requirements and principles while establishing a corrugated boardproduction facility and maintaining its operations in order to avoid risks, to save time and financial resources and as a result to operate in the Russian market obtaining higher profits.

Unexplored aspects of bureaucratic autonomy: a state of the field and ways forward

This article first provides a selective overview of the literature on bureaucratic autonomy and identifies different approaches to this topic. The second section discusses three major sets of open questions, which will be tackled in the contributions to this special issue: the subjective, dynamic and relational nature of autonomy; the complex linkages between tasks, organizational forms, and national path dependencies on the one hand and autonomy and performance on the other hand; and the interplay between autonomy, accountability and democratic legitimacy.

Biological control of white mold by Trichoderma harzianum in common bean under field conditions

Abstract: The objective of this work was to evaluate Trichoderma harzianum isolates for biological control of white mold in common bean (Phaseolus vulgaris). Five isolates were evaluated for biocontrol of white mold in 'Perola' common bean under field conditions, in the 2009 and 2010 crop seasons. A commercial isolate (1306) and a control treatment were included. Foliar applications at 2x109 conidia mL-1 were performed at 42 and 52 days after sowing (DAS), in 2009, and at 52 DAS in 2010. The CEN287, CEN316, and 1306 isolates decreased the number of Sclerotinia sclerotiorum apothecia per square meter in comparison to the control, in both crop seasons. CEN287, CEN316, and 1306 decreased white mold severity during the experimental period, when compared to the control.

Use of field measurements in fatigue analysis of forestry cranes

Tässä työssä on esitetty väsyttävän kuormituksen mittaamiseen ja mittausdatan jälkikäsittelyyn sekä väsymismitoitukseen liittyviä menetelmiä. Menetelmien sovelluskohteena oli metsäkoneen kuormain, joka on väsyttävästi kuormitettu hitsattu rakenne. Teoriaosassa on kuvattu väsymisilmiötä ja väsymismitoitusmenetelmiä sekä kuormitusten tunnistamiseen ja mittausten jälkikäsittelyyn liittyviä menetelmiä. Yleisimmin käytettyjen väsymismitoitusmenetelmien rinnalle on esitetty luotettavuuteen perustuvaa väsymismitoitusmenetelmää. Kuormainten suunnittelussa on keveys- j a kestoikävaatimusten takia erityisen suuri merkitys väsymisen huomioimisella. Rakenteille on ominaista tietyt toiminnan kannalta välttämättömät hitsatut yksityiskohdat, jotka usein määräävät koko rakenteen kestoiän. Koska nämä ongelmakohdat pystytään useimmiten tunnistamaan jo suunnitteluvaiheessa, voidaan yksityiskohtien muotoilulla usein parantaa huomattavasti koko rakenteen kestoikää. Näiden yksityiskohtien optimointi on osittain mahdollista toteuttaa ilman kuormituskertymätietoa, mutta useimmiten kuormitusten tunnistaminen on edellytys parhaan ratkaisun löytymiselle. Tällöin toistaiseksi paras keino todellisen väsyttävän kuormituksen tunnistamiseksi on pitkäaikaiset kenttämittaukset. Kenttämittauksilla selvitetään rakenteeseen kohdistuvat kuormitukset venymäliuskojen avulla. Kuormitusten tunnistamisella on erityisen suuri merkitys kun halutaan määrittää rakenteen kestoikä. Väsyminen ja väsyttävä kuormitus ovat kuitenkin tilastollisia muuttujia j a yksittäiselle rakenteelle ei ole mahdollista määrittää tarkkaa k estoikää. Tilastollisia menetelmiä käyttäen on kuitenkin mahdollista määrittää rakenteen vaurioitumisriski. Laskettaessa vaurioitumisriskiä suurelle määrälle yksittäisiä rakenteita voidaan muodostaa tarkkojakin ennusteita mahdollisten vaurioiden lukumäärästä. Tällöin kuormituskertymätiedosta voi olla tavanomaisen suunnittelun lisäksi laajempaa hyötyä esimerkiksi takuukäsittelyssä. Tässä työssä on sovellettu esitettyjä teorioita käytännössä metsäkoneen harvesterin puomiston väsymistarkasteluun. Kyseisen rakenteen kuormituksia mitattiin kahden viikon aikana yhteensä 35 tuntia, jonka perusteella laskettiin väsyttävän kuormituksen tilastollinen jakauma esimerkkitapaukselle. Mittauksen perusteella ei voitu tehdä kuitenkaan johtopäätöksiä tuotteen koko elinkaaren kuormituksista eikä muiden samanlaisten tuotteiden kuormituksista, koska mitattu otos oli suhteellisen lyhyt ja rajoittui vain yhteen käyttäjään ja muutamaan käyttökohteeseen. Menetelmien testaamiseksi kyseinen otos oli kuitenkin riittävä. Kuormituskertymätietoa käytettiin hyväksi myös laatumääritysten muodostamisessaesimerkkitapaukselle. Murtumismekaniikkaan perustuvalla menetelmällä arvioitiinharvesteripilarin valun mahdollisten valuvirheiden suurin sallittu koko. Luotettavuuteen pohjautuvan mitoitusmenettelyn tarve näyttää olevanlisääntymässä, joten pitkäaikaisten kenttämittausten tehokas hyödyntäminen tulee olemaan keskeinen osa väsymismitoitusta lähitulevaisuudessa. Menetelmiä olisi mahdollista tehostaa yhdistämällä kuormituskertymään erilaisia kuormitusten suhteen riippuvia tunnettuja suureita kuten käsiteltävän puun halkaisija. Todellisettuotekohtaiset tilastolliset jakaumat kuormituksista voitaisiin muodostaa mahdollisesti tehokkaammin, jos esimerkiksi kuormitusten riippuvuus metsätyypistä pystyttäisiin ensin määrittämään.

LEAF GAS EXCHANGE CHARACTERISTICS OF FOUR PAPAYA GENOTYPES DURING DIFFERENT STAGES OF DEVELOPMENT

In this research, was used four papaya (Carica papaya L.) genotypes: three from the 'Solo ( Sunrise Solo TJ, Sunrise Solo 72/12 and Baixinho de Santa Amália) group and one from the 'Formosa' group (Know-You 01). They were grown in plastic pots containing a sandy-clay-loam soil subjected to pH correction and fertilization, under greenhouse conditions. Throughout the experimental period plants were subjected to periodic irrigation to maintain the soil humitidy around field capacity. The experiment was conducted 73 days after sowing. In all genotypes, leaf gas exchange characteristics were determined. The net photosynthetic rate (A, mumol m-2 s-1 ), stomatal conductance (g s mol m-2 s-1), leaf temperature (T I, 0C) and intercellular carbon dioxide concentration (ci, muL L-1) on the 4th, 5th, 6th, 7th, 8th and 9th leaves from the plant apex were determined. No significant differences were observed for A, g s, c i, or Tl either among the leaves sampled from any of the genotypes. A was positively correlated with g s and in the other hand T I and g s were negatively correlated. The results suggest that, for 73 DAP, all the sampled papaya leaves functioned as sources of organs.

Settlement evolution, field systems and sedimentary processes in a Mediterranean mid-mountain (Montseny Massif, Catalunya)

This paper presents the first results of a current research project about human – environmental interactions in the Montseny Massif. Our work sets out to integrate two research lines in the studied area: - Archaeological and archaeo-morphological surveys in a lower part of the mountains in order to characterize the evolution of the settlements and field systems. - The geological and geomorphological characterization of the slope and terrace deposits in relation with field systems and archaeological data. First results point out the intensive occupation of these inland areas during the Iberian and the Roman periods. Post-Roman sediments show different processes of erosion.

Wärtsilä Field Service - Kehittämisen välineenä oppiva organisaatio ja innovaatiot

Pro gradu tutkimuksessa käsitellään oppivan organisaation ja innovatiivisuuden teorioita eri näkökulmista. Kirjallisuuskatsauksen jälkeen esitellään Turun Wärtsilä Field Service, ja empiirisessä osiossa teetetään edellä mainittuihin aiheisiin liittyen kaksi ryhmähaastattelua osaston työntekijöillä. Tämä pro gradu syntyi tarpeesta toteuttaa tutkimus Wärtsilä Field Servicessä tekijöistä, jotka vaikuttavat innovatiiviseen toimintaa sekä tiedon välittymiseen. Haastattelujen pohjalta syntyy ensi kertaa suomenkielistä materiaalia Wärtsilä kenttähuollon työntekijöiden mielipiteistä ja innovatiivisuutta estävistä ja edistävistä tekijöistä. Tämä on myös gradun päätutkimus kohde. Oppivat organisaatiot pyrkivät jatkuvasti uusiutumaan ympäristön vaatimustenmukaisesti ja analysoimaan omaa toimintaansa. Täten yksilöiltä edellytetään jatkuvaa muutosvalmiutta, innovatiivisuutta ja oppimisvalmiutta. Tämän perusteella,tässä tutkimuksessa, innovatiivisuus oletetaan kuuluvaksi myös erottamattomastioppiviin organisaatioihin. Lisäksi informaation välittyminen huomioidaan tutkimuksessa keskeisenä tekijänä, sillä innovatiivisuus kanavoituu yrityksen eduksi parhaiten, mikäli työntekijät saadaan jakamaan tietoa avoimesti. Tutkimuksen tavoitteena on palvella johtoa, ja antaa pohja selvitystyölle kehitettäessä yrityksen toimintaa, ja kerättäessä ideoita, jotka lopulta tuottavat lisäarvoa yrityksen toiminnalle. Ryhmähaastattelujen tuloksena syntyy ehdotelmia toteuttamiskelpoisista arkipäivän toimintaan liittyvistä parannuksista, joita Wärtsilän kenttähuollossa on mahdollista soveltaa.

Usages de l'eau à Gaya (Niger) : entre fortes potentialités et contraintes majeures

Résumé: Le département de Gaya, cadre de notre étude, est situé au sud-ouest de la république du Niger. Il dispose d'un important potentiel hydrique composé des eaux de surface (une centaine de mares permanentes, le fleuve Niger sur 106 km) et de sept aquifères superposés comprenant des nappes de subsurface (affleurantes par endroit) et des nappes artésiennes. L'étude sur les usages de l'eau à Gaya a été menée à travers plusieurs axes centrés sur l'estimation et la répartition spatiale des ressources en eau, le cadre juridique et institutionnel régulant leur mise en valeur, les différents secteurs d'utilisation de l'eau ainsi que les contraintes affectant cette utilisation. L'usage de la cartographie à travers les SIG dans le traitement et l'analyse des données, couplée à notre expérience d'une dizaine d'année de travaux dans la région, a permis de dresser des synthèses richement illustrées permettant de mieux comprendre tous les enjeux liés à la problématique des usages de l'eau dans cette partie du Niger. Contrairement à la vision que l'on a traditionnellement du Sahel où le manque d'eau constitue une des contraintes majeures au développement, ici des conditions locales particulières contredisent ce cliché et transposent le débat sur un autre plan. Il s'agit de la maîtrise de l'eau au niveau local à travers l'élaboration d'une politique appropriée qui tienne compte non seulement des spécificités locales de la ressource, mais aussi des différents types d'usages. La politique de l'eau au Niger, définie selon le Schéma directeur de mise en valeur et de gestion des ressources en eau, à travers la mise en place d'un important arsenal juridique et institutionnel, a eu le mérite de tracer un canevas sur la question, mais a montré ses limites au niveau pratique après dix ans d'essai. En effet au niveau de Gaya, ni l'Etat ni les partenaires au développement (bailleurs de fonds extérieurs) n'ont tenu compte des caractéristiques locales de la ressource ou du contexte socioéconomique particulier de la région. Ce qui a entraîné la réalisation d'infrastructures inadaptées aux réalités hydrogéologiques locales ainsi que des choix inappropriés au niveau de certains aménagements. En dépit de l'abondance de la ressource, son accès tant au niveau quantitatif que qualitatif, reste difficile pour une grande partie des acteurs ruraux. Les différents handicaps rencontrés dans la mise en valeur des ressources en eau résultent de cette incohérence de la politique nationale de l'eau, mais aussi de la difficulté de son application sur le terrain où persiste un pluralisme juridique caractérisé par la cohabitation de deux systèmes de régulation à savoir les droits coutumiers et la législation moderne. Ces différents éléments mis en évidence dans cette étude sur la zone de Gaya pourraient servir de base pour un meilleur aménagement des ressources en eau dans le cadre plus large d'une politique d'aménagement du territoire prenant en compte tous les facteurs tant physiques que socioéconomiques de la région. Abstract: The department of Gaya, in which this study was done, is located in the SW area of the Republic of Niger. It has an important hydrological potential composed of surface water (approximately 100 permanent ponds, 106 km of the Niger River) and 7 bodies of underground water sources including sub-surface and artresan wells. This study of the exploitation of wtaer in Gaya has been carried out employing several parameters based on: the estimation and spacial distribution of water ressources, the juridic and institutional rules governing their utilisation and the various constraints affecting this exploitation. The use of mapping when treating and analysing data, coupled with ten years personel field experience, resulted in a richly illustrated synthesis of this data. This, in turn, led to a better comprehension of all the factors related to problems of water utilisation in this particular region of Niger. Contrary to the generally accepted view that the lack of water ressources is a major contributing factor to the lack of development in the Sahel, in Gaya the local conditions contradict this statement. In this region, and at the local level, the proper use of water is based on the elaboration of an appropriate policy which takes into account not only the local specifics of water ressources but the various types of water utilsation as well. Local use of water and water ressources are dependant on established rules. Water policy in Niger is defined by the General Schema based on an important institutional and judicary arsenal of rules and regulations. However, after a ten-year trial period, this system was shown to have its limitations. In Gaya, neither the State nor the development agencies took into consideration local characteristics nor the socio-economic context of the region. This, in turn, resulted in putting in place infrastructures that were not adapted to local hydrogeological realities as well as inappropriate choices in land planning and development. In spite of the abundance of water ressources, access to them remains difficult for most of the rural population. The various difficulties encountered are the result of incoherent water policies on a national level as well as the lack of practical application in this area. This is due to a double judicary system where two regulatory systems co-exist:traditional laws and modern legislation. the different elements brought out by this study could serve as a basis for a better utilisation of water ressources on a larger scale in which land planning and development policies would take into consideration all the physcial as well as the socio-economical factors of this region.

Field Sales Management Control: Towards a Multi-Level Theory

The purpose of this dissertation is to increase the understanding and knowledge of field sales management control systems (i.e. sales managers monitoring, directing, evaluating and rewarding activities) and their potential consequences on salespeople. This topic is important because research conducted in the past has indicated that the choice of control system type can on the other hand have desirable consequences, such as high levels of motivation and performance, and on the other hand leadto harmful unintended consequences, such as opportunistic or unethical behaviors. Despite the fact that marketing and sales management control systems have been under rigorous research for over two decades, it still is at a very early stage of development, and several inconsistencies can be found in the research results. This dissertation argues that these inconsistencies are mainly derived from misspecification of the level of analysis in the past research. These different levels of analysis (i.e. strategic, tactical, and operational levels) involve very different decision-making situations regarding the control and motivation of sales force, which should be taken into consideration when conceptualizing the control. Moreover, the study of salesperson consequences of a field sales management control system is actually a cross-level phenomenon, which means that at least two levels of analysis are simultaneously involved. The results of this dissertation confirm the need to re-conceptualize the field sales management control system concept. It provides empirical evidence for the assertion that control should be conceptualized with more details atthe tactical/operational level of analysis than at the strategic levelof analysis. Moreover, the results show that some controls are more efficiently communicated to field salespeople than others. It is proposed that this difference is due to different purposes of control; some controls aredesigned for influencing salespersons' behavior (aim at motivating) whereas some controls are designed to aid decision-making (aim at providing information). According to the empirical results of this dissertation, the both types of controls have an impact to the sales force, but this impactis not as strong as expected. The results obtained in this dissertation shed some light to the nature of field sales management control systems, and their consequences on salespeopl

Guidelines for irrigation scheduling of banana crop in São Francisco Valley, Brazil. I - Root distribution and activity

In order to establish guidelines for irrigation water management of banana cv. Pacovan (AAB group, Prata sub-group) in Petrolina County, northeastern Brazil, the root distribution and activity were measured on an irrigated plantation, in a medium texture soil, with plants spaced in a 3 x 3 m grid. Root distribution was evaluated by the soil profile method aided by digital image analysis, while root activity was indirectly determined by the changing of soil water content and by the direction of soil water flux. Data were collected since planting in January 1999 to the 3rd harvest in September 2001. Effective rooting depth increased from 0.4 m at 91 days after planting (dap), to 0.6 m at 370, 510, and 903 dap, while water absorption by roots was predominantly in the top 0,6 m.

Guidelines for irrigation scheduling of banana crop in São Francisco Valley, Brazil. II - Water consumption, crop coefficient, and physiologycal behavior

The water consumption and the crop coefficient of the banana cv. Pacovan were estimated in Petrolina County, northeastern Brazil, in order to establish guidelines to irrigation water management. Evaluations were carried out since planting in January 1999 to the 3rd harvest in September 2001 on a microsprinkler irrigated orchard, with plants spaced in a 3 x 3 m grid. Average daily water consumption was 3.9, 4.0, and 3.3 mm in the 1st, 2nd and 3rd growing seasons, respectively. Crop coefficient values increased from 0.7 (vegetative growth) to 1.1 (flowering). Even with high soil water availability, transpiration was reduced due to high evaporative demand.