Síntese e caracterização de copolímeros à base de poli(metacrilato de metila) e divinilbenzeno com propriedades magnéticas

Nesta dissertação, foram sintetizados copolímeros à base de poli(metacrilato de metila) (PMMA), divinilbenzeno (DVB) com propriedades magnéticas pela técnica de polimerização em suspensão. O material utilizado para conferir propriedade magnética foi o ferro. Foi estudada a influência das variáveis reacionais para a formação de microesferas (ordem de adição das fases orgânica e aquosa e a dispersão do ferro antes e após a pré-polimerização), o efeito da concentração de ferro adicionado na polimerização, a influência da razão molar MMA/DVB na formação do copolímero, o efeito do tipo de agente de suspensão e a velocidade de agitação para a síntese dos copolímeros. Os copolímeros foram caracterizados quanto à morfologia, estabilidade térmica, teor de ferro incorporado, distribuição de tamanho de partículas, propriedades magnéticas, área superficial, volume e tamanho de poros. As análises de propriedades magnéticas mostraram que os materiais obtidos não apresentaram ciclos de histerese, estando assim próximos de um material com propriedades superparamagnéticas, com magnetização de saturação entre 8,0 e 13,0 emu/g. Os copolímeros sintetizados com velocidade de agitação 500 RPM, temperaturade 90 C, tempo de polimerização de 24h, monômeros MMA/DVB 50/50 (% molar); razão volumétrica fase orgânica/fase aquosa 1/3, diluente heptano, grau de diluição 100% apresentaram melhor controle morfológico, melhor magnetização de saturação, tamanho de partículas menores e maior tamanho de poros

The design of multimesh, multidepth gillnet fleets for use in the Lake Victoria Fisheries Research Project

Multimesh, multidepth gillnet fleets are useful in assessing fish stock abundance, size distribution and depth distribution. Using data collected on net mesh selectivity for Nile perch, Lates niloticus (L.), in the Kenyan waters of Lake Victoria, suitable mesh sizes for gillnet fleets for use in the Lake Victoria Fisheries Research Project were determined. The modal selection length for Nile perch in the mesh sized used in the earlier experiment were determined, as was the size range vulnerable to capture. Initial trials suggest 60% of the Nile perch swim within 5 m of the bottom. Setting and hauling of the nets is simple and quick, allowing the nets to be used at the same time as other sampling programmes.

Síntese, caracterização e avaliação de materiais poliméricos com propriedades bactericidas

Nesta dissertação, foram preparados materiais poliméricos com atividade bactericida a partir de copolímeros de estireno (Sty) e divinilbenzeno (DVB) e de celulose bacteriana. Três copolímeros à base de Sty e DVB foram sintetizados através da técnica de polimerização em suspensão aquosa. Os copolímeros foram preparados com diferentes estruturas porosas, por meio da variação da composição do sistema diluente. Um copolímero comercial macrorreticulado, Amberlite XAD4, de elevada área superficial, também foi usado neste estudo com o objetivo de comparar sua estrutura polimérica e seu desempenho com o dos copolímeros sintetizados. Os copolímeros de Sty-DVB foram caracterizados por meio da densidade aparente, área específica, diâmetro médio de poros, volume de poros, microscopias ótica e eletrônica de varredura, grau de inchamento, espectrometria de infravermelho com transformada de Fourier (FTIR), análise termogravimétrica e análise elementar. Os copolímeros de Sty-DVB foram modificados quimicamente através da reação de nitração, seguida da reação de redução do grupo nitro a amino e posterior reação de diazotação e hidrólise do grupo sal de diazônio. Os copolímeros modificados contendo os grupos NH2 e OH foram utilizados como suporte para a ancoragem das nanopartículas de prata. As partículas de prata foram obtidas pela redução dos íons Ag+ empregando-se cloridrato de hidroxilamina como redutor e PVP como protetor de colóide. O teor de prata impregnada foi determinado pelo método volumétrico. A celulose bacteriana (BC) foi empregada como uma matriz para impregnação de nanopartículas de prata. Membranas de BC foram impregnadas com solução aquosa de AgNO3, a seguir foi realizada a redução dos íons Ag+ com três diferentes agentes redutores (hidrazina, hidroxilamina e ácido ascórbico) empregando ou não protetor de colóide (PVP ou gelatina). As membranas de BC/Ag0 obtidas foram caracterizadas por difração de raios-X, análise termogravimétrica e microscopia eletrônica de varredura. A capacidade bactericida dos copolímeros de Sty-DVB, dos copolímeros funcionalizados e impregnados com prata e das membranas de BC/Ag0 foi avaliada através do método da contagem em placa contra suspensões de Escherichia coli, em diferentes concentrações (103 a 107 células/mL). Foi observado que os copolímeros de origem e os copolímeros modificados contendo os grupos NO2 e NH2 não apresentaram atividade bactericida contra suspensões de E. coli em nenhuma concentração. Por outro lado, os copolímeros modificados contendo o grupo OH apresentaram alguma atividade bactericida, embora abaixo do esperado devido à baixa incorporação de hidroxilas fenólicas. Os copolímeros modificados impregnados com Ag apresentaram maior ação bactericida do que os copolímeros modificados, o que comprova que a ação bactericida é devida às partículas de prata ancoradas nos copolímeros. Os copolímeros modificados contendo o grupo OH impregnados com Ag mesmo possuindo menores teores de prata apresentaram maior ação bactericida do que os copolímeros modificados contendo o grupo NH2 impregnados com Ag. A maior ação bactericida pode ser atribuída à combinação da atividade bactericida das partículas de prata com a atividade dos grupos hidroxilas fenólicas mesmo que estes grupos estejam pouco incorporados nos copolímeros. Os compósitos de BC/Ag0 exibiram atividade bactericida contra E. coli que foi atribuída à ação das nanoparticulas de prata obtidas quando foi empregada a hidroxilamina como agente redutor e a gelatina como protetor de colóide

Preparação e caracterização de bionanocompósitos à base de gelatina e magnetita reticulados com sacarose

Nesta dissertação, foram estudadas a preparação e a caracterização debionanocompósitos à base de gelatina e magnetita. Sacarose foi empregada comoagente de reticulação e gelatina tipo A e gelatina tipo B foram comparadas nautilização para a preparação das microesferas por meio de emulsão água-em-óleo.As microesferas foram caracterizadas por VSM, DSC, TGA, FTIR, testes deinchamento, espectroscopia de absorção atômica, microscopia ótica e microscopiaeletrônica de varredura. Um planejamento de experimentos variando-se aconcentração de gelatina e de sacarose, a temperatura e a velocidade de agitaçãofoi realizado a fim de encontrar quais parâmetros influenciam o diâmetro dasmicroesferas. A concentração de gelatina e velocidade de agitação foram osparâmetros diretamente associados com os tamanhos de partículas. A distribuiçãode tamanho das partículas revelou que o diâmetro das microesferas variou de 5 a 60micrômetros, com predominância na faixa de 11 a 30 micrômetros. A extensão dareticulação foi aumentada com o aumento do tempo de aquecimento na etapa depreparação das microesferas. Todos os bionanocompósitos apresentaramsuperparamagnetismo. Os resultados mostraram que não há diferença significativa entre a utilização de gelatina do tipo A e gelatina do tipo B. Além disso, o estudo de reticulação degelatina revelou que, ao contrário do que diz a literatura, a sacarose não é umagente de reticulação para as cadeias proteicas, pois não foram encontradasevidências de uma reação química entre a sacarose e gelatina

Formation and characterization of tin oxide aerogel derived from sol-gel process based on tetra(n-butoxy)tin(IV)

Transparent and translucent SnO2 aerogels with high specific surface area (>300m(2)/g) have been prepared by sol-gel process using tetra(n-butoxy)tin(IV) as a starting compound, and supercritical drying technique for solvent extraction. Light scattering measurements reveal that the polymeric cluster size distribution in sol system is gradually broadened during sol-gel transition. SEM images show that the aerogels are made up of the cottonlike oxide agglomerates with a large number of Pores. TEM images show that these aerogels seem to be self-similar at different magnifications. Their pore size distribution is pretty wide ranging, from mesopore to macropore especially for that of translucent aerogel. (C) 2004 Elsevier B.V. All rights reserved.

γ-LiAIO2上非极性ZnO薄膜制备及其光谱性质研究

利用激光脉冲沉积（PLD）技术在（302）γ-LiAIO2衬底上成功生长了非极性的a面（112^-0）γZnO薄膜．衬底温度为350℃时，薄膜是混合取向（a向和C向），以c面ZnO为主，且晶粒尺寸分布很宽；提高温度达500℃，薄膜变为单一的（1120）取向，摇摆曲线半高宽O.65^o，晶粒尺寸分布趋窄，利用偏振透射谱可以明显看出其面内的各向异性．衬底温度650℃下制备的样品晶粒继续长大，虽然摇摆曲线半高宽变大，但光致发光谱（PL）带边发射峰半高宽仅为105meV，比在350℃，500℃下制备的样品小1／5

Eu:Y2O3 nano-phosphor prepared by novel energy-saving solution combustion method

A novel energy- and time-saving solution combustion method has been developed to prepare Eu:Y2O3 nano-crystal line phosphor. This novel method employs anhydrous ethanol as solvent and fuel. The prepared nano-crystals after heat-treatment own narrow size distribution, well dispersibility and sinterability, confirmed by XRD, TEM and FTIR. The emission spectra of nano-Eu:Y2O3 Samples show clear nano-size related phenomena. (c) 2007 Elsevier B.V. All rights reserved.

Spray combustion synthesis of nanocrystalline Y2O3 and its thermodynamical and morphological study

Nano Y2O3 particles with a spherical shape and narrow size distribution have been prepared by a novel spray combustion method. The experimental procedure is briefly described and the thermodynamical process of the post-heat treatment is investigated in this paper. The precursor fully crystallized when treated at as low as 400 degrees C. Prepared particles showed spherical shape and well dispersibility under different treating conditions. Narrow size distribution of particles was achieved even when the precursor was treated at 1373 K. (C) 2007 Elsevier B.V. All rights reserved.

Chaine de traitement des statistiques de pêche artisanale: les sennes des lagunes de Côte d'Ivoire

Computer programs were developed to calculate the parameters commonly used in fisheries statistics: catch per unit effort, catch by species, size distribution, etc. These parameters were computed for collective fishing, purse seine and beach seine; important aspects of the artisanal fisheries in the Ebrié Lagoon.

Incidental catch and estimated discards of pelagic sharks from the swordfish and tuna fisheries in the Mediterranean Sea

Large pelagic sharks are caught incidentally in the swordfish and tuna fisheries of the Mediterranean Sea. In our study, twelve shark species were documented as bycatch over three years from 1998 to 2000. Blue shark (Prionace glauca) was the predominant species in all gears and areas examined. Shortfin mako (Isurus oxyrinchus), common thresher shark (Alopias vulpinus), and tope shark (Galeorhinus galeus) were the next most abundant shark species—found in more than half of the areas sampled. Catch composition varied both in the areas and gears investigated. Sharks represented 34.3% in weight of total catches sampled in the Alboran Sea and 0.9% in the Straits of Sicily. Higher shark catches were observed in the swordfish longline fishery, where a nominal CPUE value reached 3.8 sharks/1000 hooks in the Alboran Sea. Size distribution by fishing gear varied significantly. Albacore longline catches consisted mainly of juveniles, whereas subadult and adult specimens were more frequent in the swordfish longline and driftnet fishery. The percentage of sharks brought onboard alive was exceptionally high; only 5.1% of the specimens died. Few discards (seven blue shark) were recorded in the Greek longline fleet during onboard sampling in the Aegean Se

Escapement of the Cape rock lobster (Jasus lalandii ) through the mesh and entrance of commercial traps

Metal-framed traps covered with polyethylene mesh used in the fishery for the South African Cape rock lobster (Jasus lalandii) incidentally capture large numbers of undersize (<75 mm CL) specimens. Air-exposure, handling, and release procedures affect captured rock lobsters and reduce the productivity of the stock, which is heavily fished. Optimally, traps should retain legalsize rock lobsters and allow sublegal animals to escape before traps are hauled. Escapement, based on lobster morphometric measurements, through meshes of 62 mm, 75 mm, and 100 mm was investigated theoretically under controlled conditions in an aquarium, and during field trials. SELECT models were used to model escapement, wherever appropriate. Size-selectivity curves based on the logistic model fitted the aquarium and field data better than asymmetrical Richards curves. The lobster length at 50% retention (L50) on the escapement curve for 100-mm mesh in the aquarium (75.5 mm CL) approximated the minimum legal size (75 mm CL); however estimates of L50 increased to 77.4 mm in field trials where trapentrances were sealed, and to 82.2 mm where trap-entrances were open. Therfore, rock lobsters that cannot escape through the mesh of sealed field traps do so through the trap entrance of open traps. By contrast, the wider selection range and lower L25 of field, compared to aquarium, trials (SR = 8.2 mm vs. 2.6 mm; L25 =73.4 mm vs. 74.1 mm), indicate that small lobsters that should be able to escape from 100-mm mesh traps do not always do so. Escapement from 62-mm mesh traps with open entrance funnels increased by 40−60% over sealed traps. The findings of this study with a known size distribution, are related to those of a recent indirect (comparative) study for the same species, and implications for trap surveys, commercial catch rates, and ghost fishing are discussed.

Simulation of Tail Weight Distributions in Biological Year 1986–2006 Landings of Brown Shrimp, Farfantepenaeus aztecus, from the Northern Gulf of Mexico Fishery

Size distribution within re- ported landings is an important aspect of northern Gulf of Mexico penaeid shrimp stock assessments. It reflects shrimp population characteristics such as numerical abundance of various sizes, age structure, and vital rates (e.g. recruitment, growth, and mortality), as well as effects of fishing, fishing power, fishing practices, sampling, size-grading, etc. The usual measure of shrimp size in archived landings data is count (C) the number of shrimp tails (abdomen or edible portion) per pound (0.4536 kg). Shrimp are marketed and landings reported in pounds within tail count categories. Statistically, these count categories are count class intervals or bins with upper and lower limits expressed in C. Count categories vary in width, overlap, and frequency of occurrence within the landings. The upper and lower limits of most count class intervals can be transformed to lower and upper limits (respectively) of class intervals expressed in pounds per shrimp tail, w, the reciprocal of C (i.e. w = 1/C). Age based stock assessments have relied on various algorithms to estimate numbers of shrimp from pounds landed within count categories. These algorithms required un- derlying explicit or implicit assumptions about the distribution of C or w. However, no attempts were made to assess the actual distribution of C or w. Therefore, validity of the algorithms and assumptions could not be determined. When different algorithms were applied to landings within the same size categories, they produced different estimates of numbers of shrimp. This paper demonstrates a method of simulating the distribution of w in reported biological year landings of shrimp. We used, as examples, landings of brown shrimp, Farfantepenaeus aztecus, from the northern Gulf of Mexico fishery in biological years 1986–2006. Brown shrimp biological year, Ti, is defined as beginning on 1 May of the same calendar year as Ti and ending on 30 April of the next calendar year, where subscript i is the place marker for biological year. Biological year landings encompass most if not all of the brown shrimp life cycle and life span. Simulated distributions of w reflect all factors influencing sizes of brown shrimp in the landings within a given biological year. Our method does not require a priori assumptions about the parent distributions of w or C, and it takes into account the variability in width, overlap, and frequency of occurrence of count categories within the landings. Simulated biological year distributions of w can be transformed to equivalent distributions of C. Our method may be useful in future testing of previously applied algorithms and development of new estimators based on statistical estimation theory and the underlying distribution of w or C. We also examine some applications of biological year distributions of w, and additional variables derived from them.

Structure and development of a Scalesia pedunculata stand in the Galapagos Islands

Stands of Scalesia pedunculata in the Galapagos Islands often develop as single-aged cohorts following episodes of mass death and regeneration. We updated earlier studies on a stand that had regenerated soon after the 1982–3 El Niño event. We quantified stem size distribution and dispersion pattern in a 0.56 ha plot near Los Gemelos on Santa Cruz Island. The plot was dominated (95% of basal area) by S. pedunculata. The stem size distribution showed the increased mean and variance for diameter (since 1987 and 1991) expected of an aging stand. Stems averaged smaller than in 1981, just before the last mass mortality episode. Large S. pedunculata stems were regularly dispersed while smaller stems were clumped and negatively associated with larger stems, implying that intraspecific competition may be important in structuring the stand. CDF Contribution Number 1008.

River Dart fisheries survey 1965

This is the first River Dart Fisheries Survey produced by the Devon River Authority; which was carried out from May to October 1965. The objective was to examine the distribution and relative abundance of salmonid fish in the River Dart, in order to assess the possibility or desirability, of increasing salmon smolt production of the river by artificial propagation or other means. Description, chemical, pollution and biological conditions of the River Dart along with fisheries catches, water extraction and spawning are briefly cited. The method includes the choice of sections and sampling techniques. The results go through the number/type/class of fishes counted while the survey took place, distribution patterns within the different transects/brooks, competition between salmon parr and trout and estimations of population. The section on the discussion and recommendations is introduced by a brief explanation of the bases for the Artificial Propagation Programme and the River Dart specific case-study. The annexes contains River Dart and tributaries maps, fish size distribution tables and figures, tables with totals of salmonid fish found and population density tables.

River Erme Fisheries Survey 1965

This is the River Erme Fisheries Survey, 1965 by the Devon River Authority. The survey was carried out during April and May 1965, with the principal object being the determination of the abundance and distribution of salmonid fish in the River Erme in relation to the discharge from Stowford Paper Mills, Ivybridge. It contains a brief introduction of general aspects of the catchment, chemistry, pollution, biology and fisheries in the river, methodology that looks at the selected transects and techniques for sampling, results and recommendations. It contains tables with totals of all salmonid fish found at each section, size distribution of trout, surface area of section and population density.