At surface behaviour, dive depth and dive duration and associated hydrographic data of adult male southern elephant seals from King George Island from expedition JUB2010 with links to datasets

Understanding the distribution and foraging ecology of major consumers within pelagic systems, specifically in relation to physical parameters, can be important for the management of bentho-pelagic systems undergoing rapid change associated with global climate change and other anthropogenic disturbances such as fishing (i.e., the Antarctic Peninsula and Scotia Sea). We tracked 11 adult male southern elephant seals (Mirounga leonina), during their five-month post-moult foraging migrations from King George Island (Isla 25 de Mayo), northern Antarctic Peninsula, using tags capable of recording and transmitting behavioural data and in situ temperature and salinity data. Seals foraged mostly within the Weddell-Scotia Confluence, while a few foraged along the western Antarctic Peninsula shelf of the Bellingshausen Sea. Mixed model outputs suggest that the at-sea behaviour of seals was associated with a number of environmental parameters, especially seafloor depth, sea-ice concentrations and the temperature structure of the water column. Seals increased dive bottom times and travelled at slower speeds in shallower areas and areas with increased sea-ice concentrations. Changes in dive depth and durations, as well as relative amount of time spent during the bottom phases of dives, were observed in relation to differences in overall temperature gradient, likely as a response to vertical changes in prey distribution associated with temperature stratification in the water column. Our results illustrate the likely complex influences of bathymetry, hydrography and sea ice on the behaviour of male southern elephant seals in a changing environment and highlight the need for region-specific approaches to studying environmental influences on behaviour.

At surface behaviour at location on spot of southern elephant seals from Marion Island in 2004 with links to datasets

A novel classification system was applied to the sea level anomaly (SLA) environment around Marion Island. We classified the SLA seascape into habitat types and calculated percentage of habitat use of ten juvenile southern elephant seals (SES). Movements were compared to SLA and SLA slope values indicative of ocean eddy features. This classification provides a measure of habitat change due to seasonal fluctuations in SLA. Some of the seals made two migrations in different seasons, each of similar duration and proportions of potential foraging behaviour. The seals in this study did not use any intense eddy features, but their behaviours varied with SLA class. Potential foraging behaviour was positively influenced by negative SLA values (i.e. areas of below average sea surface height). Searching behaviour during the winter was more likely at eddy edges where high SLA slope values correlated with low SLA values. Though the seals did not forage within newly spawned eddies, they did forage near the sub-Antarctic front. Plankton and other biological resources transported by eddies formed at the subtropical convergence zone are evidently concentrated in this region and enhance the food chain there, forming a foraging ground for juvenile SES from Marion Island.

Aprubt climate change events in the Northeastern Atlantic Ocean

The western Iberian margin has been one of the key locations to study abrupt glacial climate change and associated interhemispheric linkages. The regional variability in the response to those events is being studied by combining a multitude of published and new records. Looking at the trend from Marine Isotope Stage (MIS) 10 to 2, the planktic foraminifer data, conform with the alkenone record of Martrat et al. [2007], shows that abrupt climate change events, especially the Heinrich events, became more frequent and their impacts in general stronger during the last glacial cycle. However, there were two older periods with strong impacts on the Atlantic meridional overturning circulation (AMOC): the Heinrich-type event associated with Termination (T) IV and the one occurring during MIS 8 (269 to 265 ka). During the Heinrich stadials of the last glacial cycle, the polar front reached the northern Iberian margin (ca. 41°N), while the arctic front was located in the vicinity of 39°N. During all the glacial periods studied, there existed a boundary at the latter latitude, either the arctic front during extreme cold events or the subarctic front during less strong coolings or warmer glacials. Along with these fronts sea surface temperatures (SST) increased southward by about 1°C per one degree of latitude leading to steep temperature gradients in the eastern North Atlantic and pointing to a close vicinity between subpolar and subtropical waters. The southern Iberian margin was always bathed by subtropical water masses - surface and/ or subsurface ones -, but there were periods when these waters also penetrated northward to 40.6°N. Glacial hydrographic conditions were similar during MIS 2 and 4, but much different during MIS 6. MIS 6 was a warmer glacial with the polar front being located further to the north allowing the subtropical surface and subsurface waters to reach at minimum as far north as 40.6°N and resulting in relative stable conditions on the southern margin. In the vertical structure, the Greenland-type climate oscillations during the last glacial cycle were recorded down to 2465 m during the Heinrich stadials, i.e. slightly deeper than in the western basin. This deeper boundary is related to the admixing of Mediterranean Outflow Water, which also explains the better ventilation of the intermediate-depth water column on the Iberian margin. This compilation revealed that latitudinal, longitudinal and vertical gradients existed in the waters along the Iberian margin, i.e. in a relative restricted area, but sufficient paleo-data exists now to validate regional climate models for abrupt climate change events in the northeastern North Atlantic Ocean.

Effects of elevated CO2 on fish behaviour undiminished by transgenerational acclimation

Behaviour and sensory performance of marine fishes are impaired at CO2 levels projected to occur in the ocean in the next 50-100 years, and there is limited potential for within-generation acclimation to elevated CO2. However, whether fish behaviour can acclimate or adapt to elevated CO2 over multiple generations remains unanswered. We tested for transgenerational acclimation of reef fish olfactory preferences and behavioural lateralization at moderate (656 µatm) and high (912 µatm) end-of-century CO2 projections. Juvenile spiny damselfish, Acanthochromis polyacanthus, from control parents (446 µatm) exhibited an innate avoidance to chemical alarm cue (CAC) when reared in control conditions. In contrast, juveniles lost their innate avoidance of CAC and even became strongly attracted to CAC when reared at elevated CO2 levels. Juveniles from parents maintained at mid-CO2 and high-CO2 levels also lost their innate avoidance of CAC when reared in elevated CO2, demonstrating no capacity for transgenerational acclimation of olfactory responses. Behavioural lateralization was also disrupted for juveniles reared under elevated CO2, regardless of parental conditioning. Our results show minimal potential for transgenerational acclimation in this fish, suggesting that genetic adaptation will be necessary to overcome the effects of ocean acidification on behaviour.

Measurements of fracture toughness applying a four-point-bending technique of ice core B34 from Kohnen Station, Dronning Maud Land, Antarctica

The critical fracture toughness is a material parameter describing the resistance of a cracked body to further crack extension. It is an important parameter to simulate and predict the break-up behaviour of ice shelves from calving of single icebergs to the disintegration of entire ice shelves over a wide range of length scales. The fracture toughness values are calculated with equations that are derived from an elastic stress analysis. Additionally, an X-ray computer tomography (CT scanner) was used to identify the density as a function of depth. The critical fracture toughness of 91 Antarctic inland ice samples with densities between 840 to 870 kg/m**3 has been determined by applying a four-point-bending technique on single edge v-notched beam samples. The examined ice core was drilled 70m north of Kohnen Station, Dronnning Maud Land (75°00' S, 00°04' E, 2882 m).

Corrosion behaviour of new duplex stainless steel reinforcements embedded in chloride contaminated concrete

The use of reinforcing stainless steels (SS) in concrete have proved to be one of the most effective methods to guarantee the passivity of reinforced concrete structures exposed to chloride contaminated environment. The present research studies the corrosion behaviour of a new duplex SS reinforcements with low nickel content (LND) (more economicaly compatible) is compared with the conventional austenitic AISI 304 SS and duplex AISI 2304 SS. Corrosion behaviour of ribbed SS reinforcements was studied in mortars with chloride content (0, 0.4, 2 and 4% Cl ⎯ ) using linear polarization resistance and potentiostatic pulses technique, Ecorr and Rp values were monitored over the exposure time. The obtained icorr data for the new duplex stainless steel LND no afforded passivity breakdown after one year exposure

Response timing in the lunge and target change in elite versus medium-level fencers.

The aim of the present work is to examine the differences between two groups of fencers with different levels of competition, elite and medium level. The timing parameters of the response reaction have been compared together with the kinetic variables which determine the sequence of segmented participation used during the lunge with a change in target during movement. A total of 30 male sword fencers participated, 13 elite and 17 medium level. Two force platforms recorded the horizontal component of the force and the start of the movement. One system filmed the movement in 3D, recording the spatial positions of 11 markers, while another system projected a mobile target over a screen. For synchronisation, an electronic signal enabled all the systems to be started simultaneously. Among the timing parameters of the reaction response, the choice reaction time (CRT) to the target change during the lunge was measured. The results revealed differences between the groups regarding the flight time, horizontal velocity at the end of the acceleration phase, and the length of the lunge, these being higher for the elite group, as well as other variables related to the temporal sequence of movement. No significant differences have been found in the simple reaction time or in CRT. According to the literature, the CRT appears to improve with sports practice, although this factor did not differentiate the elite from medium-level fencers. The coordination of fencing movements, that is, the right technique, constitutes a factor that differentiates elite fencers from medium-level ones.

Laser Shock Processing: An Emerging Technique for the Enhancement of Surface Properties and Fatigue Life of High Strength Metal Alloys

Profiting by the increasing availability of laser sources delivering intensities above 10 9 W/cm 2 with pulse energies in the range of several Joules and pulse widths in the range of nanoseconds, laser shock processing (LSP) is being consolidating as an effective technology for the improvement of surface mechanical and corrosion resistance properties of metals and is being developed as a practical process amenable to production engineering. The main acknowledged advantage of the laser shock processing technique consists on its capability of inducing a relatively deep compression residual stresses field into metallic alloy pieces allowing an improved mechanical behaviour, explicitly, the life improvement of the treated specimens against wear, crack growth and stress corrosion cracking. Following a short description of the theoretical/computational and experimental methods developed by the authors for the predictive assessment and experimental implementation of LSP treatments, experimental results on the residual stress profiles and associated surface properties modification successfully reached in typical materials (specifically steels and Al and Ti alloys) under different LSP irradiation conditions are presented

El injerto en pepino corto tipo español (Cucumis sativus L.) recomencaciones para su empleo en la zona central española

El injerto en hortalizas es uno de los temas de más actualidad en el panorama hortícola, no solo español, sino occidental, y recalcamos occidental, pues en muchos países que no corresponden a ese ámbito, sobre todo asiáticos: Japón, Corea, China, Filipinas, etc., esta es una técnica que cuenta con una gran difusión desde hace décadas, siendo, por ejemplo en Japón, la mayoría de sus cultivos de cucurbitáceas y solanáceas realizados con planta injertada. A finales de los noventa quedó claro que el empleo de bromuro de metilo tenía una fecha de caducidad y que las zonas que tenían una fuerte dependencia de este desinfectante de suelo debían de buscar alternativas a un plazo lo más corto posible, con un punto añadido sobre etapas anteriores, debían ser alternativas lo más respetuosas posible con el medio ambiente y que no incrementaran, de forma importante, los costes de producción. En la zona centro y concretamente en los invernaderos de la Comunidad de Madrid y zonas cercanas de Toledo y Guadalajara el pepino era y es el cultivo predominante, los horticultores empleaban el bromuro de metilo de forma sistemática para desinfectar sus suelos y la desaparición de este producto les planteaba una gran incertidumbre, lo que llevó a que desde diferentes instancias se buscaran diferentes alternativas. Tras analizar las posibilidades que se podían implementar y conocido el buen resultado que había dado el injerto en sandía en Almería, se decidió acometer los trabajos que conforman esta Tesis Doctoral, planteando en la zona, diferentes ensayos con la idea de conocer, si el injerto en pepino, con los cultivares empleados habitualmente, podía ser una alternativa real para los horticultores, tanto de Madrid, como los de las zonas cercanas de Toledo y Guadalajara. Se pretendía conocer sobre todo las repercusiones agronómicas y si esta técnica podría emplearse en solitario o era necesario complementarla con otras alternativas: desinfectantes químicos, solarización, biofumigación e incluso desinfección con vapor de agua. Los ensayos fueron realizados de forma secuencial entre el año 1999 y el 2011, comprobándose en primer lugar que el empleo de portainjertos híbridos de calabaza era posible con los cultivares de pepino corto tipo español, mayoritariamente empleados en los últimos años del siglo XX y primeros del XXI, fundamentalmente: Serena. Tras los primeros ensayos, Shintoza parecía el portainjerto híbrido de calabaza (Cucurbita maxima x C. moschata) con mejores perspectivas de empleo, pues presentaba la ventaja adicional de ser bien conocido por los semilleros que producen planta injertada al ser, en esos momentos, el portainjerto más empleado en sandía, lo que garantizaba por su lado, su empleo en pepino, y que los horticultores pudiesen disponer de planta injertada. Más adelante los trabajos se encaminaron hacia la determinación de la densidad y tipo de poda más adecuado para la planta injertada, realizándose múltiples ensayos en esta dirección, que culminaron con la conclusión de que el extravigor que los portainjertos conferían a las plantas permitía conducir estas a dos o más brazos (se suelen emplear dos, por mejor adaptación a los trabajos de manejo de la planta por parte de los agricultores), con lo que se podría disminuir la densidad de planta y por tanto ahorrar en este capítulo, cosa que preocupaba y preocupa a los agricultores. Se llegó a determinar que es posible reducir la densidad de plantación en alrededor de un 25%, estando la densidad de brazos más adecuada entre 3 y 3.5 br•m-2. Tras las primeras decisiones tomadas sobre el portainjerto y la densidad más adecuada, se continuó con el estudio de adaptación de estas propuestas a los nuevos cultivares que las empresas de semillas iban proponiendo y los agricultores adoptando. Estas acciones se complementaron con la introducción de nuevos portainjertos susceptibles de sustituir a Shintoza o rotar con él para cambiar de sistema radicular, lo que es conveniente cuando se emplean, como es el caso, portainjertos que no son resistentes a nematodos, principalmente de la especie Meloidogyne incognita, el mayor problema en la zona, debido al suelo. Cultivares como Trópico, en un primer momento, y Urano y Motril más recientemente, se adaptaron muy bien a esta técnica. Entre los portainjertos que mostraron buena adaptación a la técnica de injerto y suficientemente buena compatibilidad con la mayoría de los cultivares ensayados destacan: RS-841, Strongtosa y Camel. Azman también mostró un comportamiento relevante, pero este portainjerto no podrá ser empleado, al ser recientemente retirado del mercado por la empresa que lo obtuvo y comercializó Aunque no era el objetivo principal de esta Tesis Doctoral, se ha comprobado que puede ser interesante combinar el empleo del injerto con otras técnicas alternativas al bromuro de metilo para superar los problemas debidos a enfermedades del suelo o nematodos, pero debe seguirse trabajando pues este es un tema en continua evolución, tanto si se trata de desinfectantes, a la mayoría de los cuales les está siendo retirado el permiso para su comercialización, como de otros métodos como la biofumigación o el empleo de vapor de agua. Queda muy claro que el injerto puede considerarse entre los métodos respetuosos con el medio ambiente, si no el que más, en lo que alternativas al bromuro de metilo se refiere. También en otro momento, se comprobó que con plantas injertadas es posible reducir el aporte de nutrientes, sobre todo nitrógeno, lo que además de un ahorro supone una mejora más desde el punto de vista medioambiental. En definitiva, queda demostrado que es factible el empleo del injerto en pepino corto tipo español, que las selecciones de los híbridos entre Cucurbita maxima y C. moschata que habitualmente se están empleando en sandía son también de aplicación en estos pepinos y que su empleo puede llevarnos a producciones suficientemente remuneradoras, alargándose en muchos casos el ciclo y no modificando, de forma apreciable, la calidad. Queda también demostrado que aunque los portainjertos no sean resistentes a nematodos, su extravigor les hace desarrollarse, desde el punto de vista productivo, suficientemente, llegando por tanto, a “convivir” con ese problema. Al no ser resistentes los portainjertos, y permanecer e incluso agravarse el problema de nematodos es conveniente poder contar con diferentes portainjertos que nos permitan rotar entre ellos y utilizar diferentes sistemas radiculares que harán menos fácil el parasitismo de los nematodos, como recomiendan los nematólogos que se haga. ABSTRACT Vegetable grafting is one of the most current practices in horticulture, not only in Spain, but also in other Western and Asian countries, such as Japan, South Korea, China, the Philippines, etc. This is a decades-old, widespread technique: In fact, most cucurbit and solanaceous crops in Japan and Korea are grafted. At the end of the 1990s, it was clear that methyl bromide had an expiry date. Consequently, the areas strongly dependant on this soil disinfectant had to look for alternatives as quickly as possible. Besides, these had to be as environmentally friendly as possible and should not increase production costs significantly. The cucumber has been and still is the most important crop in greenhouses of the Comunidad de Madrid and in areas near Toledo and Guadalajara. Cucumber growers used methyl bromide systematically to disinfect the soil. The banning of this chemical product brought about uncertainty, which encouraged the search for different alternatives. After analyzing the different possibilities and taking into account the good results of watermelon grafting in Almería, it was decided to carry out the works that make up this doctoral thesis. Different trials were made in order to know if the cultivars used in cucumber grafting might be a real alternative for farmers, not only in Madrid, but also in the areas near Toledo and Guadalajara. The main aim was to assess the agronomic repercussions and whether that technique could be used alone, or if other complementary alternatives, such as chemical disinfectants, solarisation, biofumigation, or even steam disinfection, were necessary. Trials were carried out sequentially from 1999 to 2011. It was observed that the use of pumpkin hybrid rootstocks could be applied to cultivars of Spanish short cucumbers, mainly grown in the late 20th and early 21st centuries eg Serena. After the early trials, Shintoza (Cucurbita maxima x C. moschata), a pumpkin hybrid rootstock, seemed to be the best option, as it had the additional advantage of being well known by nurseries growing grafting plants. Bearing this in mind, Shintoza was then the hybrid rootstock to be used in cucumbers and consequently growers could have grafted plants at their disposal. Later on, research was focused on density and the most adequate type of pruning, by carrying out several trials. These experiments showed that, the extra vigour the rootstocks gave to the plants, allowed them to have two or three stems, (normally nurserymen use two, as it is easier for them to manage the plants). These findings would lead to the lessening the density of the plant and thus reduce costs, something which worried and still worries farmers. It was stated that it would be possible to reduce the density of the plants by about 25%, the optimum density of the stems ranging from 3 to 3.5 stem-m-2. Once decisions were taken both on the rootstock and the appropriate density, we went on to study how to apply these proposals to the new cultivars which the seed companies were proposing and the farmers were applying. These measures were complemented with the introduction of new rootstocks capable of replacing Shintoza, or rotating with it in order to change the root system. This is particularly necessary when rootstocks, non-resistant to nematodes, mainly of the species Meloidogyne incognita, are used. This is the main problem due to the soil of that area. Cultivars such as Trópico, at first, and Urano and Motril, more recently, adapted quite well to this technique. Among the rootstocks which adapted well to grafting and which were compatible with most tested cultivars, were, in particular, RS-841 Strongtosa and Camel. The behaviour of Azman was worth studying, but this rootstock was removed from the market by the company which had bought and commercialized it. Although not the main purpose of the research, it was observed that combining grafting with other alternatives to methyl bromide in order to overcome problems due to soil diseases or nematodes may be worthwhile. However, further research is needed, as this topic is in constant evolution, not only when we come to disinfectants, most of which are being affected by the removal of the permit for commercialization, but also when we refer to other techniques such as biofumigation or the use of steam. Results also showed that grafted plants may reduce the amount of fertilizers, particularly nitrogen, used: This means both saving money and the protection of the environment. We may conclude by saying that grafting Spanish short cucumbers is feasible, that the selections of the hybrids between Cucurbita maxima and C. moschata, habitually used in watermelon grafting, can also be applied to these cucumbers. It can also be concluded that the use of these grafting techniques may lead to profitable yields, by lengthening the growing cycle in many cases and by maintaining the quality to a large extent. Although these rootstocks are not resistant to nematodes, the results showed that their extra vigour enables them to develop in terms of production, and thus they cope with this problem. Since these rootstocks are not resistant to nematodes and the problem with these nematodes may even worsen, it is recommended that different types of rootstocks should be available to enable both the rotation and the use of different root systems, which will encourage the parasitism of nematodes.

Los recursos medioambientales aplicados a la arquitectura contemporánea en vivienda aislada

Objetivos. Análisis a través del prisma de la sostenibilidad, con un triple objetivo: consumo de energía, aspecto constructivo y recursos arquitectónicos, de algunos ejemplos destacados de vivienda aislada desde 1973, crisis del petróleo, hasta el cambio ideológico del 11 de septiembre de 2001. Emplazadas en microclimas semejantes en distintas latitudes, para extrapolar al clima mediterráneo. Ejemplos. Siete viviendas aisladas de distinto diseño conceptual, situadas en climas subtropicales, en ecosistemas variados pero de concepción medioambiental, constructiva y arquitectónica muy actual. Los ejemplos elegidos, por su intencionalidad, su diseño, y su sentido utilitario, constructivo y semiótico, se analizan desde el hecho acumulativo y el hecho reactivo, mediante el procedimiento de contrastar diversas fuentes de información. Objetivos. El análisis de cada una de las viviendas procedentes de diferentes arquitectos, se hace mediante la simulación de modelos que permitan describir la parte esencial del comportamiento de un sistema de interés, así como diseñar y realizar experimentos con el modelo para extraer conclusiones de sus resultados y apoyar la toma de decisiones proyectual. Procedimiento. En una primera fase, el medio natural queda definido por su localización, interpretación del lugar, el clima concreto (mediante climogramas generales y de isopletas), determinando un diagnóstico medioambiental para el establecimiento de estrategias a partir de los datos experimentales a contrastar con el resultado finalmente obtenido. En una segunda fase se eligen los casos más representativos de LowTech / LowEnergy y HighTech / HighEnergy. Se realiza un análisis del modelo, frente a uno de los elementos predominantes: sol, aire, agua, tierra, luna, vegetación y miscelánea. Resultados. De los casos estudiados se extraen principios aplicables en cada uno de los ámbitos: medioambiental, relacionados con la adaptabilidad energética; constructivo, en relación con la economía; y arquitectónico, vinculado con lo social, con una perspectiva diferente sobre los nuevos espacios vivibles. Conclusiones y relevancia. En los emplazamientos estudiados, los arquitectos herederos del movimiento moderno, han utilizado los recursos medioambientales pasivos y activos más actuales en cada uno de los elementos, así como la orientación, la ventilación, la radiación, la inercia térmica,…las actitudes más contemporáneas como expertos bioclimáticos. Los principios extraídos deben facilitar un proceso proyectual mediante pautas experimentales a desarrollar sin un uso desmesurado de la tecnología. Los principios y las conclusiones obtenidos servirán de aplicación a nuevos modelos conociendo los parámetros más relevantes. La modelización analógica - digital permitirá evaluar el comportamiento más aplicable según las necesidades a satisfacer. Objectives. Architectural analysis through the prism of sustainability with three aims: energy consumption, building technique and architectonical resources. The study is focused on some key examples of low density houses since 1973 (featured by the Oil crisis) until the 11th September 2001´s ideological change. These living spaces are settled in similar microclimates although in different latitudes with strong possibilities for applications in Mediterranean climates. Examples. Seven remote detached dwellings with different conceptual characters, located in subtropical climates, in different ecosystems, however with a sustainable basis and architectonical building concepts very updated. The cultural objects chosen, due to legitimate reasons such as: purpose, a plan, an utilitarian sense, constructive and semiotic, are analyzed under an accumulative perspective along with the reactive fact as the procedure to contrast and compare different sources of information. Goals. The analysis of the examples of different architects, will be done in order to simulate through models which describe and display the essential part of behaviour that corresponds to an interest system, along with the design and to try out or experiment with the model and to draw up results which support the projecting decision process. Procedure. On a first stage, the natural environment is shaped by its location, interpretation of the pace, a particular climate (through general climograms and isophlets), determining an environmental diagnosis which would be able to generate scientific conclusions in order to develop adequate strategies. Hence from experimental data we contrast with the results. On a second stage the more representative cases of LowTech / LowEnergy and HighTech / HighEnergy are choosen. We analyze the model taking into consideration and facing a key element: sun, air, water, soil, moon, vegetation and miscellany. Results. From the study cases we draw up applicable principles in each field: the ecological in relation with energetic adaptability, the constructive potential related with economy, and the social in relation with a different perspective about new architectural living spaces. Conclusions and Relevance. On those settlements studied, the heirs architects from Modern Movement, had used the passive and active, updated environmental resources in each element. For instance, aspects like orientation, ventilation, solar radiation, thermal inertia…, and the most contemporary attitude as bioclimatic expert that they are. These principles speed up through experimental guidelines, the technology is diminished and the design process be provided. The principles and conclusions generated will be useful in order to apply new models because we are able to know the most relevant key parameters. The analogical-digital modelizations allow us to revaluate the applicable behaviour according to the needs to satisfy.

Analyzing climate change adaptation in the agriculture and water sectors: screening risks and opportunities.

As part of the Mediterranean area, the Guadiana basin in Spain is particularly exposed to increasing water stress due to climate change. Future warmer and drier climate will have negative implications for the sustainability of water resources and irrigation agriculture, the main socio- economic sector in the region. This paper illustrates a systematic analysis of climate change impacts and adaptation in the Guadiana basin based on a two-stage modeling approach. First, an integrated hydro-economic modeling framework was used to simulate the potential effects of regional climate change scenarios for the period 2000-2069. Second, a participatory multi-criteria technique, namely the Analytic Hierarchy Process (AHP), was applied to rank potential adaptation measures based on agreed criteria. Results show that, in the middle-long run and under severe climate change, reduced water availability, lower crop yields and increased irrigation demands might lead to water shortages, crop failure, and up to ten percent of income losses to irrigators. AHP results show how private farming adaptation measures, including improving irrigation efficiency and adjusting crop varieties, are preferred to public adaptation measures, such as building new dams. The integrated quantitative and qualitative methodology used in this research can be considered a socially-based valuable tool to support adaptation decision-making.

Change-Impact driven Agile Architecting.

Software architecture is a key factor to scale up Agile Software Development ASD in large softwareintensive systems. Currently, software architectures are more often approached through mechanisms that enable to incrementally design and evolve software architectures aka. agile architecting. Agile architecting should be a light-weight decision-making process, which could be achieved by providing knowledge to assist agile architects in reasoning about changes. This paper presents the novel solution of using change-impact knowledge as the main driver for agile architecting. The solution consists of a Change Impact Analysis technique and a set of models to assist agile architects in the change -decision-making- process by retrieving the change-impact architectural knowledge resulting from adding or changing features iteration after iteration. To validate our approach, we have put our solution into practice by running a project of a metering management system in electric power networks in an i-smart software factory.

A non-persistently transmitted-virus induces a pull?push strategy inits aphid vector to optimize transmission and spread

Plant viruses are known to modify the behaviour of their insect vectors, both directly and indirectly,generally adapting to each type of virus?vector relationship in a way that enhances transmissionefficiency. Here, we report results of three different studies showing how a virus transmitted in a non-persistent (NP) manner (Cucumber mosaic virus; CMV, Cucumovirus) can induce changes in its host plant,cucumber (Cucumis sativus cv. Marumba) that modifies the behaviour of its aphid vector (Aphis gossypiiGlover; Hemiptera: Aphididae) in a way that enhances virus transmission and spread non-viruliferousaphids changed their alighting, settling and probing behaviour activities over time when exposed toCMV-infected and mock-inoculated cucumber plants. Aphids exhibited no preference to migrate fromCMV-infected to mock-inoculated plants at short time intervals (1, 10 and 30 min after release), butshowed a clear shift in preference to migrate from CMV-infected to mock-inoculated plants 60 min afterrelease. Our free-choice preference assays showed that A. gossypii alates preferred CMV-infected overmock-inoculated plants at an early stage (30 min), but this behaviour was reverted at a later stage andaphids preferred to settle and reproduce on mock-inoculated plants. The electrical penetration graph(EPG) technique revealed a sharp change in aphid probing behaviour over time when exposed to CMV-infected plants. At the beginning (first 15 min) aphid vectors dramatically increased the number of shortsuperficial probes and intracellular punctures when exposed to CMV-infected plants. At a later stage (sec-ond hour of recording) aphids diminished their feeding on CMV-infected plants as indicated by much lesstime spent in phloem salivation and ingestion (E1 and E2). This particular probing behaviour includingan early increase in the number of short superficial probes and intracellular punctures followed by aphloem feeding deterrence is known to enhance the transmission efficiency of viruses transmitted in aNP manner. We conclude that CMV induces specific changes in a plant host that modify the alighting,settling and probing behaviour of its main vector A. gossypii, leading to optimum transmission and spreadof the virus. Our findings should be considered when modelling the spread of viruses transmitted in a NPmanner.

Diseño metodológico para la creación y desarrollo de organizaciones innovadoras, basadas en un modelo de liderazgo que genere entornos facilitadores de la creatividad, implantación de procesos de innovación y creación de productos y servicios innovadores

La presente investigación tiene como objetivo el desarrollo de una metodología que favorezca la innovación en las empresas a través de la actividad directiva, analizando a su vez, su influencia a nivel macro, en los sistemas de innovación, en las políticas de innovación y en el capital intelectual y a nivel micro, en la innovación, en el desempeño y en el clima organizacional. Se estima importante realizar un estudio sobre este tema debido a que la innovación se considera un pilar crítico para el desarrollo social a través de la competitividad de las empresas, así como, una fuente importante de ventaja competitiva. Existe abundante literatura sobre la influencia de la innovación en la gestión empresarial y el papel que el liderazgo desempeña en términos generales. Sin embargo, la literatura presenta diversos estilos de liderazgo sin mostrar una línea consistente de interrelación entre ellos, por lo que finalmente no existe una relación sólida entre el liderazgo, la gestión empresarial y la innovación. Este hecho se debe, como se muestra en la tesis, a que la literatura analiza las organizaciones y el liderazgo desde una perspectiva sociológica u organizacional, y otra desde la perspectiva psicológica sin aportar una línea de articulación entre ambas. Es decir, la literatura analiza el comportamiento organizacional pero no su causa. A lo largo de la tesis se van desarrollando diferentes líneas de trabajo que se convierten en aportaciones empíricas y académicas. Así, una de las aportaciones de la tesis es la sustitución de la figura del líder como persona, por la de un directivo con una doble función; por un lado, la función de liderazgo cuyo objetivo es generar cambio y por el otro, la función de gestionar el día a día o desempeño. Sustituir la figura del líder por una doble funcionalidad directiva facilita la comprensión del concepto liderazgo, lo que permite a su vez, establecer estrategias para su desarrollo, haciendo una realidad el que el liderazgo puede ser aprendido. Este resultado constituye la primera aportación de la tesis. Así mismo, a través de un exhaustivo análisis de la literatura, se desarrolla una propuesta de liderazgo integrado de acuerdo con el modelo Stuart-Kotze, el cual se describe también ampliamente. Encontrar un modelo único de liderazgo supone la piedra angular para el desarrollo de la metodología. Esta propuesta de liderazgo integrado da lugar a la segunda aportación de la tesis. Del mismo modo, se realiza un estudio en profundidad de la perspectiva psicológica de las organizaciones desarrollando el constructo Miedo al Error (ME) que resulta ser un rasgo de la personalidad existente en todos los seres humanos y que presenta una influencia negativa tanto en el desempeño, como en la innovación empresarial. Este resultado permite identificar cuales son las verdaderas barreras para el ejercicio del liderazgo, señalando que la disminución del ME debe ser considerada como una competencia de la Inteligencia Emocional a ser desarrollada por los directivos. Este resultado constituye la tercera aportación de la tesis. Una vez desarrollado el modelo de gestión empresarial expuesto, se procede a su validación, analizando la relación entre los constructos que definen el modelo de gestión: el desempeño, la innovación y el ME. Para identificar las influencias o relaciones de causalidad que subyacen entre los constructos, se utilizó la técnica del modelo de ecuaciones estructurales (SEM). La población objeto de estudio estuvo constituida por 350 profesionales con responsabilidad directiva, procedentes de empresas del sector servicios repartidas por toda la geografía española. Como fuente primaria de recolección de información se utilizó el cuestionario desarrollado por Stuart-Kotze M-CPI (Momentum Continuous Performance Improvement). En primer lugar se procedió a evaluar las propiedades psicométricas del modelo de medida, llevándose a cabo un análisis factorial exploratorio (AFE) y un análisis factorial confirmatorio (AFC) de segundo orden. Los resultados obtenidos ponen de manifiesto que el constructo desempeño (D) viene determinado por dos dimensiones, (DOP), desempeño orientado hacia la planificación y (DORT), desempeño orientado hacia la realización de la tarea. Es decir, la muestra de directivos no percibe que la planificación en el día a día y la realización de la tarea estén articuladas. Posteriormente se procede a realizar el contraste del modelo a través del método de ecuaciones estructurales. Los resultados muestran que la relación de influencia de la dimensión DOP no es significativa, por lo que el constructo D queda representado únicamente por la dimensión DORT. Los resultados de la investigación proporcionan conclusiones e hipótesis para futuras investigaciones. Si bien la muestra de directivos realiza un plan estratégico, éste no se tiene en cuenta en el día a día. Este hecho podría explicar el alto grado de administración por crisis tan frecuente en la empresa española. A su vez, el ME presenta una influencia negativa en la innovación, lo que concuerda con la literatura. Al respecto, considerar el ME como un rasgo de la personalidad, presente tanto en directivos como en colaboradores, facilita la comprensión de las barreras de la organización hacia la comunicación abierta a la vez, que una dirección de trabajo para la mejora de la capacidad innovadora de la organización. Por último, los resultados establecen la existencia de una relación causal entre el desempeño diario y la innovación. Con respecto a este segundo resultado y analizando los comportamientos que identifican el constructo D surgen también varias conclusiones e hipótesis para futuras investigaciones. Los resultados ponen de manifiesto que la muestra de directivos genera iniciativas de cambio con la finalidad de que el trabajo diario salga adelante según los estándares de calidad definidos. Sin embargo, estas iniciativas sólo proceden de los directivos, sin participación alguna de los colaboradores, los cuales son sólo responsables de la implementación produciéndose la consiguiente desmotivación y pérdida de oportunidades. Esta conclusión pone de manifiesto que la innovación de las empresas de la muestra sucede para garantizar la eficiencia de los procesos existentes, pero en ningún caso surge de la iniciativa de buscar una mejor eficacia empresarial. Este hecho plantea un origen doble de la innovación en los procesos. La innovación proactiva que buscaría la mejora de la eficacia de la organización y una innovación de carácter reactiva que buscaría la salvaguarda de la eficiencia. Quizás sea esta la causa del gap existente entre la innovación en España y la innovación de los países que ocupan los primeros puestos en el ranking de producción de innovación lo que constituye un importante punto de partida para una investigación futura. ABSTRACT This research aims to develop a methodology that supports innovation in companies through the managers’ activity, analysing in turn its influence at the macro level: innovation systems, innovation policies and Intellectual capital and at the micro level: innovation itself, performance and organizational climate. It is considered important to conduct a study on this subject due to the fact that innovation is considered a critical pillar for the development and future of the enterprise and an important source of competitive advantage. There is abundant literature about the influence of innovation in business management and the role that leadership plays in general terms. However, the literature presents various styles of leadership without showing a consistent relationship among them, so finally there is not a strong relationship among leadership, business management and innovation. As shown in the thesis, this is due to the fact that the literature analyses organizations and leadership from a sociological or organizational perspective and from a psychological perspective, without providing a hinge line between the two. That is, the existing literature discusses organizational behaviour but not its cause. Throughout the thesis, different lines of work that become empirical and academic contributions have been developed. Thus, one of the contributions of the thesis is replacing the figure of the leader as a person, by a manager with a dual function. Firstly, we have the leadership role which aims to generate change and, on the other hand, the function to manage the day-to-day task or performance. Replacing the figure of the leader by a dual managerial functionality facilitates the understanding of the leadership concept, allowing in turn, to establish development strategies and making true that leadership can be learned. This outcome is the first contribution of the thesis. Likewise, through a comprehensive literature review, an integrated leadership proposal is developed, according to the Kotze model, which is also described widely. Finding a specific leadership model represents the cornerstone for the development of the methodology. This integrated leadership proposal leads to the second contribution of the thesis. Similarly, an in-depth study was conducted about the psychological perspective of the organizations disclosing the construct Fear of Failure. This construct is a personality trait that exists in all human beings and has a negative influence on both performance and business innovation. This outcome allows identifying which are the real barriers to the exercise of leadership, noting that the decrease in fear of failure must be considered as an Emotional Intelligence competence to be developed by managers. This outcome represents the third contribution of the thesis. Once a business management model has been developed, we proceed to its validation by analysing the relationship among the model constructs: management, innovation and fear of failure. To identify the influence or causal relationships underlying the constructs, a structural equation model (SEM) technique was used. The study population consisted of 350 professionals with managerial responsibility, from companies in the services sector scattered throughout the Spanish geography. As a primary source for gathering information a questionnaire developed by Kotze M-CPI (Continuous Performance Improvement Momentum) was used. First we proceeded to evaluate the psychometric properties of the measurement model, carrying out an exploratory factorial analysis (EFA) and a confirmatory factorial analysis (CFA) of second order. The results show that the performance construct D is determined by two-dimensions (DOP: performance oriented to planning) and (DORT: aiming at the realization of the task). That is, the sample of managers does not perceive that planning and the daily task are articulated. Then, we proceeded to make the contrast of the model through a structural equation model SEM. The results show that the influence of the DOP dimension is not significant, so that only the DORT dimension finally represents the construct D. The research outcomes provide conclusions and hypotheses for future research. Although the managers in the sample develop a strategic plan, it seems that managers do not take it into account in their daily tasks. This could explain the high degree of crisis management so prevalent in the Spanish companies. In turn, the fear of failure has a negative influence on innovation, consistent with the literature. In this regard, the fear of failure is considered as a personality trait, present in both managers and employees, which enables the understanding of organizational barriers to open communication and provides a direction to improve the organization’s innovative capacity as well. Finally, the results establish a causal relationship between daily performance and innovation. Regarding this second outcome and analysing the behaviours that identify the construct D, several conclusions and hypotheses for future research arise as well. The results show that the managers in the sample show initiatives of change in order to make everyday work go ahead, according to defined quality standards. However, these initiatives only come from managers without any participation of coworkers, which are only responsible for the implementation, and this produces discouragement and loss of opportunities. This finding shows that the innovation by the companies in the sample happens to guarantee the efficiency of existing processes, but do not arise from an initiative that seeks better business efficacy. This raises two sources of innovation in processes. The first source would be a proactive innovation that would seek improved organizational efficacy. The second one is a reactive innovation that would seek to safeguard efficiency. Perhaps this is the cause of the existing gap between the innovation activity in Spain and the innovation activity in those countries that occupy the top positions in the ranking of innovation outcomes. The Spanish companies seek process efficiency and the top innovators business efficacy. This is an important starting point for future research.