3-Methylpiperidinium ionic liquids

A wide range of room temperature ionic liquids based on the 3-methylpiperdinium cation core were produced from 3-methylpiperidine, which is a derivative of DYTEK® A amine. First, reaction with 1-bromoalkanes or 1-bromoalkoxyalkanes generated the corresponding tertiary amines (Rmβpip, R = alkyl or alkoxyalkyl); further quaternisation reactions with the appropriate methylating agents yielded the quaternary [Rmmβpip]X salts (X(-) = I(-), [CF3CO2](-) or [OTf](-); Tf = -SO2CF3), and [Rmmβpip][NTf2] were prepared by anion metathesis from the corresponding iodides. All [NTf2](-) salts are liquids at room temperature. [Rmmβpip]X (X(-) = I(-), [CF3CO2](-) or [OTf](-)) are low-melting solids when R = alkyl, but room temperature liquids upon introduction of ether functionalities on R. Neither of the 3-methylpiperdinium ionic liquids showed any signs of crystallisation, even well below 0 °C. Some related non-C-substituted piperidinium and pyrrolidinium analogues were prepared and studied for comparison. Crystal structures of 1-hexyl-1,3-dimethylpiperidinium tetraphenylborate, 1-butyl-3-methylpiperidinium bromide, 1-(2-methoxyethyl)-1-methylpiperidinium chloride and 1-(2-methoxyethyl)-1-methylpyrrolidinium bromide are reported. Extensive structural and physical data are collected and compared to literature data, with special emphasis on the systematic study of the cation ring size and/or asymmetry effects on density, viscosity and ionic conductivity, allowing general trends to be outlined. Cyclic voltammetry shows that 3-methylpiperidinium ionic liquids, similarly to azepanium, piperidinium or pyrrolidinium counterparts, are extremely electrochemically stable; the portfolio of useful alternatives for safe and high-performing electrolytes is thus greatly extended.

Man-up Against Suicide

Male suicide rates are high in Western countries including the US and Canada. Underpinned by men’s resistance to health help-seeking and challenges diagnosing mental illness including male depression, suicide ends the lives of many men amid inflicting pain and grief on the family and friends who are left behind. Fuelled by the discordant relationship between men’s low rates of depression and high rates of suicide we embarked on a unique and novel photovoice study title Man-Up Against Suicide. Specifically, men who have contemplated suicide in the past, and individuals (men and women) who have lost a male partner, family member or friend to suicide were invited to take photographs representing their experiences with men’s suicide with the ultimate goal of messaging ‘at risk’ men that there are alternatives to taking one’s life. Participants subsequently completed semi-structured individual interviews narrating the photographs and providing captions to accompany their selected images. In this presentation we share the preliminary study findings along with some participant photographs and narratives as a means to discussing; 1) men’s experiences of suicidal behaviours and their management strategies; and, 2) how men’s and women’s experiences of losing a male to suicide can de-stigmatize men’s mental illness and raise public awareness about male suicide.

A techno-economic evaluation of changing from conventional vehicles to range extended electric vehicles

Transportation accounts for 22% of greenhouse gas emissions in the UK, and increases to 25% in Northern Ireland. Surface transport carbon dioxide emissions, consisting of road and rail, are dominated by cars. Demand for mobility is rising rapidly and vehicle numbers are expected to more than double by 2050. Car manufacturers are working towards reducing their carbon footprint through improving fuel efficiency and controlling exhaust emissions. Fuel efficiency is now a key consideration of consumers purchasing a new vehicle. While measures have been taken to help to reduce pollutants, in the future, alternative technologies will have to be used in the transportation industry to achieve sustainability. There are currently many alternatives to the market leader, the internal combustion engine. These alternatives include hydrogen fuel cell vehicles and electric vehicles, a term which is widely used to cover battery electric vehicles, plug-in hybrid electric vehicles and extended-range electric vehicles. This study draws direct comparisons measuring the differing performance in terms of fuel consumption, carbon emissions and range of a typical family saloon car using different fuel types. These comparisons will then be analysed to see what effect switching from a conventionally fuelled vehicle to a range extended electric vehicle would have not only on the end user, but also the UK government.

Functional Genomic Screen Identifies Klebsiella pneumoniae Factors Implicated in Blocking Nuclear Factor κB (NF-κB) Signaling

Klebsiella pneumoniae is etiologic agent of community-acquired and nosocomial pneumonia. It has been shown that K. pneumoniae infections are characterized by reduced early inflammatory response. Recently our group have shown that K. pneumoniae dampens the activation of inflammatory responses by antagonizing the activation of the NF-κB canonical pathway. Our results revealed that K. pneumoniae capsule (CPS) was necessary but not sufficient to attenuate inflammation. To identify additional Klebsiella factors required to dampen inflammation, we standardized and applied a high-throughput gain-on-function screen to examine a Klebsiella transposon mutant library. We identified 114 mutants that triggered the activation of NF-κB. Two gene ontology categories accounted for half of the loci identified in the screening, that of metabolism and transport (32% of the mutants), and of enveloperelated genes (17%). Characterization of the mutants revealed that the lack of the enterobactin siderophore was linked to a reduced CPS expression which in turn underlined the NF- κB activation induced by the mutant. The lipopolysaccharide (LPS) O-polysaccharide and the pullulanase (PulA) type 2 secretion system (T2SS) are required for full effectiveness of immune evasion. Importantly, these factors do not play a redundant role. The fact that LPS Opolysaccharide and T2SS mutants-induced responses were dependent on TLR2-TLR4- MyD88 activation suggested that LPS Opolysaccharide and PulA perturbed TLRdependent recognition of K. pneumoniae. Finally, we demonstrate that LPS O-polysaccharide and pulA mutants are attenuated in the pneumonia mouse model. We propose that LPS Opolysaccharide and PulA T2SS could be new targets for designing new antimicrobials. Increasing TLR-governed defence responses might provide also selective alternatives for the management of K. pneumoniae pneumonia.

Highly Electrocatalytic Activity of RuO2 Nanocrystals for Triiodide Reduction in Dye-Sensitized Solar Cells

Dye-sensitized solar cells (DSCs) are promising alternatives to conventional silicon devices because of their simple fabrication procedure, low cost, and high efficiency. Platinum is generally used as a superior counter electrode (CE) material, but the disadvantages such as high cost and low abundance greatly restrict the large-scale application of DSCs. An efficient and sustainable way to overcome the limited supply of Pt is the development of high-efficiency Pt-free CE materials, which should possess both high electrical conductivity and superior electrocatalytic activity simultaneously. Herein, for the first time, a two-step strategy to synthesize ruthenium dioxide (RuO2) nanocrystals is reported, and it is shown that RuO2 catalysts exhibit promising electrocatalytic activity towards triiodide reduction, which results in comparable energy conversion efficiency to that of conventional Pt CEs. More importantly, by virtue of first-principles calculations, the catalytic mechanism of electrocatalysis for triiodide reduction on various CEs is investigated systematically and it is found that the electrochemical triiodide reduction reaction on RuO2 catalyst surfaces can be enhanced significantly, owing to the ideal combination of good electrocatalytic activity and high electrical conductivity.

Network Connectivity Proxy: Architecture, Implementation, and Performance Analysis

Several studies in the last decade have pointed out that many devices, such as computers, are often left powered on even when idle, just to make them available and reachable on the network, leading to large energy waste. The concept of network connectivity proxy (NCP) has been proposed as an effective means to improve energy efficiency. It impersonates the presence of networked devices that are temporally unavailable, by carrying out background networking routines on their behalf. Hence, idle devices could be put into low-power states and save energy. Several architectural alternatives and the applicability of this concept to different protocols and applications have been investigated. However, there is no clear understanding of the limitations and issues of this approach in current networking scenarios. This paper extends the knowledge about the NCP by defining an extended set of tasks that the NCP can carry out, by introducing a suitable communication interface to control NCP operation, and by designing, implementing, and evaluating a functional prototype.

Friedel–Crafts alkylation catalysed by GaCl3-based liquid coordination complexes

Friedel–Crafts alkylation of benzene with 1-decene was catalysed by a new family of liquid Lewis acids: liquid coordination complexes (LCCs). LCCs are prepared by mixing a metal halide (e.g. GaCl3) and a donor molecule (e.g. N,N-dimethylacetamide, urea, or trioctylphosphine oxide), with the metal halide typically used in excess. This leads to the formation of a eutectic mixture comprised of charged and neutral species in a dynamic equilibrium. GaCl3-based LCCs were used in catalytic amounts, giving high reaction rates under ambient conditions, with selectivities to 2-phenyldecane superior to those previously reported in the literature. The influence of reaction conditions and catalyst composition on the reaction rate and selectivity was investigated. Optimised reaction conditions were suggested. This exploratory study offers promise with regard to the development of safer, LCC-based alternatives to HF in industrial alkylations.

, Lexicographic Preferences in Discrete Choice Experiments: Consequences on Individual-Specific Willingness to Pay Estimates

In discrete choice experiments respondents are generally assumed to consider all of the attributes across each of the alternatives, and to choose their most preferred. However, results in this paper indicate that many respondents employ simplified lexicographic decision-making rules, whereby they have a ranking of the attributes, but their choice of an alternative is based solely on the level of their most important attribute(s). Not accounting for these simple decision-making heuristics introduces systemic errors and leads to biased point estimates, as they are a violation of the continuity axiom and a departure from the use of compensatory decision-making. In this paper the implications of lexicographic preferences are examined. In particular, using a mixed logit specification this paper investigates the sensitivity of individual-specific willingness to pay (WTP) estimates conditional on whether lexicographic decision-making rules are accounted for in the modelling of discrete choice responses. Empirical results are obtained from a discrete choice experiment that was carried out to address the value of a number of rural landscape attributes in Ireland

Fulfilling the 3Rs: Galleria mellonella as an In Vivo Model to Assess the Antimicrobial Efficacy of Self-assembling Peptide Hydrogels

The concept of ‘The Three Rs’ (The 3Rs: reduction, refinement and replacement) is an important consideration in the development of alternatives to animal testing in medical research. Invertebrate models such as Galleria mellonella are advantageous both economically and ethically.1 Galleria have proven to be effective alternatives to assess the antimicrobial activity of novel therapeutics.2
In this study Galleria mellonella are validated and used as an in vivo infection model to determine the antimicrobial activity of a novel self-assembling antimicrobial peptide NapFFKK.3 The peptide was considered as being non-toxic to the Galleria with 100% survival 120 hours post inoculation with NapFFKK. Following inoculation with Pseudomonas aeruginosa PAO1, Escherichia coli ATCC 11303, Staphylococcus epidermidis ATCC 35984 and Staphylococcus aureus ATCC 6538, the highest concentration allowing survival was selected and used as the test inoculum. Haemolymph was extracted from inoculated and peptide treated Galleria at either 24 or 72 hours post-treatment. Reduction in bacterial load was determined in comparison to a positive control. Bacterial load was decreased in all treated Galleria with decreasing antimicrobial activity demonstrated with a decreased concentration of peptide (2- log cycle reduction achieved in Escherichia coli inoculated Galleria treated with 2% NapFFKK). The results are promising regarding the use of Galleria mellonella as an infection model and NapFFKK as an effective novel antimicrobial.

The determination of optimal processing conditions for PLA and PLA/CaCO3 in twin screw extrusion using DoE and multivariate analysis

Biodegradable polymers, such as PLA (Polylactide), come from renewable resources like corn starch and if disposed of correctly, degrade and become harmless to the ecosystem making them attractive alternatives to petroleum based polymers. PLA in particular is used in a variety of applications including medical devices, food packaging and waste disposal packaging. However, the industry faces challenges in melt processing of PLA due to its poor thermal stability which is influenced by processing temperatures and shearing.
Identification and control of suitable processing conditions is extremely challenging, usually relying on trial and error, and often sensitive to batch to batch variations. Off-line assessment in a lab environment can result in high scrap rates, long lead times and lengthy and expensive process development. Scrap rates are typically in the region of 25-30% for medical grade PLA costing between €2000-€5000/kg.
Additives are used to enhance material properties such as mechanical properties and may also have a therapeutic role in the case of bioresorbable medical devices, for example the release of calcium from orthopaedic implants such as fixation screws promotes healing. Additives can also reduce the costs involved as less of the polymer resin is required.
This study investigates the scope for monitoring, modelling and optimising processing conditions for twin screw extrusion of PLA and PLA w/calcium carbonate to achieve desired material properties. A DAQ system has been constructed to gather data from a bespoke measurement die comprising melt temperature; pressure drop along the length of the die; and UV-Vis spectral data which is shown to correlate to filler dispersion. Trials were carried out under a range of processing conditions using a Design of Experiments approach and samples were tested for mechanical properties, degradation rate and the release rate of calcium. Relationships between recorded process data and material characterisation results are explored.

Development and testing of an intermediate temperature glass sealant for use in mixed ionic and electronic conducting membrane reactors

High temperature ceramic membranes have interesting possibilities for application in areas of new and developing technologies such as hydrocarbon combustion with carbon dioxide capture and electrochemical promotion of catalysis (EPOC). However, membrane module sealing remains a significant technical challenge. In this work a borosilicate glass sealant (50SiO₂·25B₂O₃·25Na₂O, mol%) was developed to fit the requirements of sealing an air separation membrane system at intermediate temperatures (300-600 °C). The seal was assessed by testing the leak rates under a range of conditions. The parameters tested included the effect of flowrate on the leak rate, the heating and cooling rates of the reactor and the range of temperatures under which the system could operate. Tests for durability and reliability were also performed. It was found that the most favourable reactor configuration employed a reactor with the ceramic pellet placed underneath the inner chamber alumina tube (inverted configuration), using a quartz wool support to keep the membrane in place prior to sealing. Using this configuration the new glass-based seal was found to be a more suitable sealant than traditional alternatives; it produced lower leak rates at all desirable flowrates, with the potential for rapid heating and cooling and multiple cycling, allowing for prolonged usage. © 2010 Elsevier B.V. All rights reserved.

Bearing Witness to the 'Pain of Others': Researching Power, Violence and Resistance in a Women's Prison

Addressing the dynamics of interpersonal violence, institutionalised abuses and prisoner isolation, this article consolidates critical analyses as challenges to the essentially liberal constructions and interpretations of prisoner agency and penal reformism. Grounded in long-term research with women in prison in the North of Ireland, it connects embedded, punitive responses that undermine women prisoners’ self-esteem and mental health to the brutalising manifestations of formal and informal punishments, including lockdowns and isolation. It argues that critical social research into penal policy and prison regimes has a moral duty, an ethical obligation and a political responsibility to investigate abuses of power, seek out the ‘view from below’. Challenging the revisionism implicit within the ‘healthy prison’ discourse, it argues for alternatives to prison as the foundation of decarceration and abolition.

Doing Gendered Time: The Harms of Women's Imprisonment

This chapter focuses on women’s imprisonment in the context of gendered punishment inflicted by the State. It considers the gender-specific consequences of incarceration for women prisoners and the potential of gender-responsive alternatives to custodial sentences. Following a brief historical overview, it traces the rise and consolidation of women’s incarceration in UK jurisdictions, noting the significance of devolution on the prison systems of Scotland and Northern Ireland. In examining the impact of neo-liberal policies and globalisation on women’s imprisonment, it draws comparisons with other advanced democratic states. Analysing the rationale underpinning the disproportionate rise in women’s incarceration, particularly in the UK and the USA the chapter identifies the persistent tensions between retributivism/ incapacitation and reformism/rehabilitation. Drawing on international research demonstrating the complex needs and vulnerabilities of women and girl prisoners, the chapter reveals the gendered harm experienced within penal regimes and the recent development - and limitations - of official gender-specific policies and practices. The emergence of distinct but related political discourses on ‘risk’ and ‘responsibilisation’ as applied to women in conflict with the law, and their consequent criminalisation, is critiqued in the contexts of structural disadvantage, gender discrimination and institutionalised racism. Within these oppressive dynamics often severe deprivations are inflicted on women’s acts of resistance both inside prison and in their communities post-release, further confining the potential of individual and collective agency. Finally, the chapter proposes fundamental change through establishing women-centred alternatives to prison, alongside policies committed to decarceration, while working towards securing the abolition of women’s imprisonment.

High accuracy android malware detection using ensemble learning

With over 50 billion downloads and more than 1.3 million apps in Google’s official market, Android has continued to gain popularity amongst smartphone users worldwide. At the same time there has been a rise in malware targeting the platform, with more recent strains employing highly sophisticated detection avoidance techniques. As traditional signature based methods become less potent in detecting unknown malware, alternatives are needed for timely zero-day discovery. Thus this paper proposes an approach that utilizes ensemble learning for Android malware detection. It combines advantages of static analysis with the efficiency and performance of ensemble machine learning to improve Android malware detection accuracy. The machine learning models are built using a large repository of malware samples and benign apps from a leading antivirus vendor. Experimental results and analysis presented shows that the proposed method which uses a large feature space to leverage the power of ensemble learning is capable of 97.3 % to 99% detection accuracy with very low false positive rates.

Applying the Transtheoretical Model to Physical Activity Behavior in Individuals With Non-Cystic Fibrosis Bronchiectasis

BACKGROUND: The transtheoretical model has been successful in promoting health behavior change in general and clinical populations. However, there is little knowledge about the application of the transtheoretical model to explain physical activity behavior in individuals with non-cystic fibrosis bronchiectasis. The aim was to examine patterns of (1) physical activity and (2) mediators of behavior change (self-efficacy, decisional balance, and processes of change) across stages of change in individuals with non-cystic fibrosis bronchiectasis.

METHODS: Fifty-five subjects with non-cystic fibrosis bronchiectasis (mean age ± SD = 63 ± 10 y) had physical activity assessed over 7 d using an accelerometer. Each component of the transtheoretical model was assessed using validated questionnaires. Subjects were divided into groups depending on stage of change: Group 1 (pre-contemplation and contemplation; n = 10), Group 2 (preparation; n = 20), and Group 3 (action and maintenance; n = 25). Statistical analyses included one-way analysis of variance and Tukey-Kramer post hoc tests.

RESULTS: Physical activity variables were significantly (P < .05) higher in Group 3 (action and maintenance) compared with Group 2 (preparation) and Group 1 (pre-contemplation and contemplation). For self-efficacy, there were no significant differences between groups for mean scores (P = .14). Decisional balance cons (barriers to being physically active) were significantly lower in Group 3 versus Group 2 (P = .032). For processes of change, substituting alternatives (substituting inactive options for active options) was significantly higher in Group 3 versus Group 1 (P = .01), and enlisting social support (seeking out social support to increase and maintain physical activity) was significantly lower in Group 3 versus Group 2 (P = .038).

CONCLUSIONS: The pattern of physical activity across stages of change is consistent with the theoretical predictions of the transtheoretical model. Constructs of the transtheoretical model that appear to be important at different stages of change include decisional balance cons, substituting alternatives, and enlisting social support. This study provides support to explore transtheoretical model-based physical activity interventions in individuals with non-cystic fibrosis bronchiectasis.