Some planktonic diatoms from the Indian Ocean

Collections of phytoplankton were made by Mr. Durairatnamat various stations between latitude 5°S and 25°S and longitude 78° E and 101° E (Fig. 1) from December 1962 to January 1963 during a cruise of the research vessel "Umitaka Maru" belonging to the Tokyo University of Fisheries. This vessel was engaged in work in connection with the International Indian Ocean Expedition (I.I.O.E.). The collections made from these stations (T.G.) were examined at the Fisheries Research Station, Colombo, for the various diatoms present and the findings are reported in this paper.

Appraisal of PD6493:1991 fracture assessment procedures

PD6493:1991 fracture assessment have been performed for a range of large-scale fracture mechanics tests conducted at TWI in the past. These tests cover several material groups, including pressure vessel steels, pipeline steels, stainless steels and aluminium alloys, including parent material and weldments. Ninety-two wide plate and pressure vessel tests have been assessed, following Levels 1, 2 and 3 PD6493:1991 procedures. In total, over 400 assessments have been performed, examining many features of the fracture assessment procedure including toughness input, proof testing, residual stress assumptions and stress state (tension, bending and biaxial). In all cases the large scale tests have been assessed as one would actual structures: i.e., based on lower bound toughness values obtained from small scale fracture toughness specimens.

The Pearl Banks inspection: April, 1970

The last major pearl fishery in the Gulf of Mannar was held in February-March, 1958, when about 4.5 million oysters were collected from the south-west Cheval Paar by dredging. (Sivalingam 1961). Subsequently, two smaller fisheries, one in 1960 and another in 1961 took place. In these two fisheries one million oysters and four hundred thousand oysters respectively were collected from the Cheval paar by dredging. (De Fonselm 1953). Inspections of the Banks were carried out in 1962, 1963, 1964 and 1965. (Balasuriya 1964 and Silva 1965 and 66). Since then inspections were not possible due to one of two reasons or both the non-availability of operational dredges and a suitable vessel for this type of work.The "Pesalai" a 235-ton stern trawler was made available by the Ceylon Fisheries Corporation management for the 1970 inspection. Two new 6-foot dredges turned out by the Government Factory were also available for this work. However, the survey was limited to 3 days-the period for which the vessel had been released. It was further limited to those areas of the banks over 6 fathoms in depth because of the risk in operating a large vessel in shallower depths.

A comparison of methods for assessing the lifetime reliability of a moored FPSO

Current design codes for floating offshore structures are based on measures of short-term reliability. That is, a design storm is selected via an extreme value analysis of the environmental conditions and the reliability of the vessel in that design storm is computed. Although this approach yields valuable information on the vessel motions, it does not produce a statistically rigorous assessment of the lifetime probability of failure. An alternative approach is to perform a long-term reliability analysis in which consideration is taken of all sea states potentially encountered by the vessel during the design life. Although permitted as a design approach in current design codes, the associated computational expense generally prevents its use in practice. A new efficient approach to long-term reliability analysis is presented here, the results of which are compared with a traditional short-term analysis for the surge motion of a representative moored FPSO in head seas. This serves to illustrate the failure probabilities actually embedded within current design code methods, and the way in which design methods might be adapted to achieve a specified target safety level.

PHOTOENHANCED DEPOSITION OF HYDROGENATED AMORPHOUS SILICON THIN FILMS.

This paper will review the different U. V. lamp photo-CVD (Chemical Vapor Deposition) techniques which have been utilized for the production of highly photoconductive hydrogenated amorphous silicon (a-Si:H) thin films. Most of these require the transmission of U. V. light through a window into the reaction vessel; leading to unwanted U. V. light absorption by the window and the a-Si:H film which tends to form on its inner surface. A deposition system developed in our laboratory will also be described, which circumvents these problems by incorporating a windowless discharge lamp into the reaction vessel.

The biology and availability of the spiny lobster Palinurus delagoae Barnard, off the coast of Mozambique

Catch and effort data and some biological characteristics of the deep water spiny lobster P. delagoae collected between August 1980 and December 1981, are presented. The work was conducted on board a commercial vessel off the coast of Mozambique.

Operatives for off-shore and deep-sea fishing vessels

The need for operatives for the offshore and deep-sea fishing vessels is currently very great, and the importance of fisheries training has long been recognized by the Department of Fisheries. In 1974 the Sri Lanka Fisheries Training Institute was established with Japanese aid. The author discusses the purpose and functions of the institute, the first batch of trainees from which finished their training in June 1977. Annexes describe the courses offered, diplomas and certificates, admission requirements, and the conditions required for candidates sitting second-hand fishing vessel examination of the Mercantile Marine Department, Bombay District.

Infrastructure facilities for deep-sea and off-shore fishing

The author presents a brief account of the infrastructure facilities required for the fishing industry. He describes those facilities presently available in Sri Lanka, and those that are under construction, and gives a few suggestions indicating the nature of infrastructure facilities that are vital to the local situation at its present stage of development. The principal facilities discussed are (1) fish landing places; (2) unloading handling facilities; (3) vessel servicing facilities; and (4) navigation aids.

Private sector to invest in off-shore fishing and to encourage the financial incentives to be introduced for deep-sea fishing in Sri Lanka

The author discusses the financial aspects of private sector investment in off-shore fishing, with particular attention to tax incentives, such as those offered to tourist hotels, which are considered applicable to the current case of fishing vessel purchase, and the operation of the vessels themselves, hiring, publicity and profitability. Tax incentives which were introduced to encourage investment in the tourist industry should be introduced to encourage investment in the fishing industry on the lines presented. It is essential that wide publicity be given for the incentives introduced so as to achieve the desired results.

A comparison of methods for the coupled analysis of floating structures

The dynamic analysis of a deepwater floating platform and the associated mooring/riser system should ideally be fully coupled to ensure a reliable response prediction. It is generally held that a time domain analysis is the only means of capturing the various coupling and nonlinear effects accurately. However, in recent work it has been found that for an ultra-deepwater floating system (2000m water depth), the highly efficient frequency domain approach can provide highly accurate response predictions. One reason for this is the accuracy of the drag linearization procedure over both first and second order motions, another reason is the minimal geometric nonlinearity displayed by the mooring lines in deepwater. In this paper, the aim is to develop an efficient analysis method for intermediate water depths, where both mooring/vessel coupling and geometric nonlinearity are of importance. It is found that the standard frequency domain approach is not so accurate for this case and two alternative methods are investigated. In the first, an enhanced frequency domain approach is adopted, in which line nonlinearities are linearized in a systematic way. In the second, a hybrid approach is adopted in which the low frequency motion is solved in the time domain while the high frequency motion is solved in the frequency domain; the two analyses are coupled by the fact that (i) the low frequency motion affects the mooring line geometry for the high frequency motion, and (ii) the high frequency motion affects the drag forces which damp the low frequency motion. The accuracy and efficiency of each of the methods are systematically compared. Copyright © 2007 by ASME.

Simplifying mooring analysis for deepwater systems using truncation

Over recent years academia and industry have engaged with the challenge of model testing deepwater structures at conventional scales. One approach to the limited depth problem has been to truncate the lines. This concept will be introduced, highlighting the need to better understand line dynamic processes. The type of line truncation developed here models the upper sections of each line in detail, capturing wave action and all coupling effects with the vessel, terminating to an approximate analytical model that aims to simulate the remainder of the line. A rationale for this is that in deep water transverse elastic waves of a line are likely to decay before they are reflected at the seabed because of nonlinear hydrodynamic drag forces. The first part of this paper is centered on verification of this rationale. A simplified model of a mooring line that describes the transverse dynamics in wave frequency is used, adopting the equation of motion of an inextensible taut string. The line is submerged in still water, one end fixed at the bottom the other assumed to follow the vessel response, which can be harmonic or random. A dimensional analysis, supported by exact benchmark numerical solutions, has shown that it is possible to produce a universal curve for the decay of transverse vibrations along the line, which is suitable for any kind of line with any top motion. This has a significant engineering benefit, allowing for a rapid assessment of line dynamics - it can be useful in deciding whether a truncated line model is appropriate, and if so, at which point truncation might be applied. This is followed by developing a truncation mechanism, formulating an end approximation that can reproduce the correct impedance, had the line been continuous to full depth. It has been found that below a certain length criterion, which is also universal, the transverse vibrational characteristics for each line are inertia driven. As such the truncated model can assume a linear damper whose coefficient depends on the line properties and frequency of vibration. Copyright © 2011 by the International Society of Offshore and Polar Engineers (ISOPE).

Active control of sound radiated by a submarine hull in bending vibration using inertial actuators

Submarines are efficient sources of low frequency radiated noise due to the vibrations induced by the rotation of the propeller in a non uniform wake. In this work the possibility of using inertial actuators to reduce the far field sound pressure is investigated. The submerged vessel is modelled as a cylindrical shell with two conical end caps. Complicating effects such as ring stiffeners, bulkheads and the fluid loading are taken into account. A harmonic radial force is transmitted from the propeller to the hull through the stern end cone and it is tonal at the blade passing frequency (rotational speed of the shaft multiplied by the number of blades). The actuators are attached at the inside of the prow end cone to form a circumferential array. Both Active Vibration Control (AVC) and Active Structural Acoustic Control (ASAC) are analysed and it is shown that the inertial actuators can significantly reduce the far field sound pressure.

A new one-boat mid-water trawl for Indian waters

Even though the rich and variegated pelagic fishery resources of our west coast are well known much has to be done for a judicial and systematic exploitation on a commercial scale. To fill up this lacuna the present paper describes in detail a new design of 10.5 m four-equal panel mid-water trawl, its rigging and operation from a medium size vessel. Comprehensive comparative efficiency studies of this gear with a 10.5m unequal panel mid-water trawl established the superiority of the new gear. From the results based on the mouth opening, resistance and the catch it is opined that this new gear can not only be used on a commercial scale in harvesting the seasonal pelagic fishery, but also as a secondary supporting gear in shrimp fishery in places like Veraval, where there is a commercially exploitable yield of quality fishes like hilsa, pomfret, seer etc., without much modification from conventional stern trawlers.

Purse-seines off Goa

The design, construction and operational details of the purse-seines operated from Goa, for sardines and mackerel are reported briefly. The deck equipment and details of vessel along with the fishing season, fishing grounds and catches are briefly accounted. The design has been compared with Japanese purse-seines operated for the same species of fishes. Based on the findings an improved design of purse-seine has been presented.

A wider choice of construction materials for the modern fishing boats

An account of fishing vessel construction materials is given, with information on essential features, and a material account. Materials discussed in detail are steel, wood, aluminium, glass reinforced plastic, and ferro-cement.