Sign Painting Department

In this section of the Sign Painting Department several students are shown working on projects. Decorating the walls are numerous signs, likely painted by students in the department. Black and white photograph.

Informationssäkerhet inom grafiska företag

The study shows the current need for security solutions concerning work with information in different areas.Investigations will show important solutions for printers’ needs to meet the increasingly harder demands forfast and safe digital communications. Important factors to be analyzed in the investigations are: access todifferent types of information, workers authority of information, access to the data base register internallyand externally, production solutions for an effective fault detection and data base solutions fororders and distribution.Planned and unplanned stops result in a standard of value in interruptions. Internal data bases areprotected by so-called “Fire Walls”, “Watch Dogs” and Virtual Private Networks. Offset plates are locked infor a definitive range of time. Subsequent destruction and remaining sheets are shredded and recycled. Alldocumentation is digital, in business control systems, which guarantees that no important documents arelying around in working places. Fault detection work is facilitated by the ability to fully track the order numberson incoming orders.

Solar energy studies and extramural learning

Extramural learning refers to the educational process that takes place outside the walls of the school (or the university). Extramural learning that takes place in a science center is characterized by hands-on and interactivity. Interactive solar energy exhibits are particularly well suited for out-door science centers. The paper presents some solar energy hands-on exhibits and extramural activities that the author has initiated and participated in.

Simulation of Photovoltaic Panel Production as Complement to Ground Source Heat Pump System

This master thesis presents a new technological combination of two environmentally friendly sources of energy in order to provide DHW, and space heating. Solar energy is used for space heating, and DHW production using PV modules which supply direct current directly to electrical heating elements inside a water storage tank. On the other hand a GSHP system as another source of renewable energy provides heat in the water storage tank of the system in order to provide DHW and space heating. These two sources of renewable energy have been combined in this case-study in order to obtain a more efficient system, which will reduce the amount of electricity consumed by the GSHP system.The key aim of this study is to make simulations, and calculations of the amount ofelectrical energy that can be expected to be produced by a certain amount of PV modules that are already assembled on a house in Vantaa, southern Finland. This energy is then intended to be used as a complement to produce hot water in the heating system of the house beside the original GSHP system. Thus the amount of electrical energy purchased from the grid should be reduced and the compressor in the GSHP would need fewer starts which would reduce the heating cost of the GSHP system for space heating and providing hot water.The produced energy by the PV arrays in three different circuits will be charged directly to three electrical heating elements in the water storage tank of the existing system to satisfy the demand of the heating elements. The excess energy can be used to heat the water in the water storage tank to some extent which leads to a reduction of electricity consumption by the different components of the GSHP system.To increase the efficiency of the existing hybrid system, optimization of different PV configurations have been accomplished, and the results are compared. Optimization of the arrays in southern and western walls shows a DC power increase of 298 kWh/year compared with the existing PV configurations. Comparing the results from the optimization of the arrays on the western roof if the intention is to feed AC power to the components of the GSHP system shows a yearly AC power production of 1,646 kWh.This is with the consideration of no overproduction by the PV modules during the summer months. This means the optimized PV systems will be able to cover a larger part of summer demand compared with the existing system.

Passive crosslaminated timber buildings : Final report Cerbof-project no. 76

In this project, Stora Enso’s newly developed building system has been further developed to allow building to the Swedish passive house standard for the Swedish climate. The building system is based on a building framework of CLT (Cross laminated timber) boards. The concept has been tested on a small test building. The experience gained from this test building has also been used for planning a larger building (two storeys with the option of a third storey) with passive house standard with this building system. The main conclusions from the project are:  It is possible to build airtight buildings with this technique without using traditional vapour barriers. Initial measurements show that this can be done without reaching critical humidity levels in the walls and roof, at least where wood fibre insulation is used, as this has a greater capacity for storing and evening out the moisture than mineral wool. However, the test building has so far not been exposed to internal generation of moisture (added moisture from showers, food preparation etc.). This needs to be investigated and this will be done during the winter 2013-14.  A new fixing method for doors and windows has been tested without traditional fibre filling between them and the CLT panel. The door or window is pressed directly on to the CLT panel instead, with an expandable sealing strip between them. This has been proved to be successful.  The air tightness between the CLT panels is achieved with expandable sealing strips between the panels. The position of the sealing strips is important, both for the air tightness itself and to allow rational assembly.  Recurrent air tightness measurements show that the air tightness decreased somewhat during the first six months, but not to such an extent that the passive house criteria were not fulfilled. The reason for the decreased air tightness is not clear, but can be due to small movements in the CLT construction and also to the sealing strips being affected by changing outdoor temperatures.  Long term measurements (at least two years) have to be carried out before more reliable conclusions can be drawn regarding the long term effect of the construction on air tightness and humidity in the walls.  An economic analysis comparing using a concrete frame or the studied CLT frame for a three storey building shows that it is probably more expensive to build with CLT. For buildings higher than three floors, the CLT frame has economic advantages, mainly because of the shorter building time compared to using concrete for the frame. In this analysis, no considerations have been taken to differences in the influence on the environment or the global climate between the two construction methods.

Minimization of stock weight during close-die forging of a spindle

In this paper, Finite Element method and full-scale experiments have been used to study a hot forging method for fabri-cation of a spindle using reduced initial stock size. The forging sequence is carried out in two stages. In the first stage, the hot rolled cylindrical billet is pre-formed and pierced in a closed die using a spherical nosed punch to within 20 mm of its base. This process of piercing or impact extrusion leads to high strains within the work piece but requires high press loads. In the second stage, the resulting cylinder is placed in a die with a flange chamber and upset forged to form a flange. The stock mass is optimized for complete die filling. Process parameters such as effective strain distribution, material flow and forging load in different stages of the process are analyzed. It is concluded from the simulations that minor modifications of piercing punch geometry to reduce contact between the punch and emerging vertical walls of the cylinder appreciably reduces the piercing load. In the flange chamber, a die surfaces angle of 52° instead of 45° is pro-posed to ensure effective material flow and exert sufficient tool pressure to achieve complete cavity filling. In order to achieve better compression, it is also proposed to shorten both the length of the inserted punch and the die “tongues” by a few mm.

Energieffektivisering av klimatskal med hänsyn till kulturhistorisk värdering : Fallstudier av tre befintliga småhus från 1900-talet ur bevarandesynpunkt

Allt hårdare lagkrav gör att det är svårt att energieffektivisera befintliga byggnader utan att förändra deras utseende. Syftet med examensarbetet är att utreda hur stor energieffektivisering, för tre befintliga småhus uppförda under 1900-talet, som är möjlig att uppnå genom förbättring av byggnadernas klimatskal, det vill säga tak, väggar, golv, fönster och dörrar, utan att förvanska byggnadernas utseende och samtidigt bevara deras kulturhistoriska värden. Arbetet bestod av en förstudie där tre byggnader identifierades, ett undersökningsskede där information om byggnaderna togs fram och ett slutsatsskede där energibesparande åtgärdsförslag togs fram och utvärderades. Byggnader som var goda representanter för sin tid och stil söktes. Byggnader från 1910-talet, 1930-talet och 1970-talet, lokaliserades. Sedan gjordes det fallstudier med intervjuer och inventeringar. För att utreda byggnadens klimatskal utfördes u-värdesberäkningar och energiberäkningar av befintliga byggander och byggnader baserade på föreslagna åtgärdsförslag. Ingen av byggnaderna nådde efter föreslagna åtgärder ner till passivhuskravet 59 kWh/år/m2 Atemp eller BBR-kravet 110 kWh/år/m2 Atemp för en byggnads specifika energianvändning. Den största möjliga energieffektivisering för de tre byggnaderna uppförda under 1900-talet, som är möjlig att uppnå utan att förvanska byggnadernas utseende och samtidigt bevara deras kulturhistoriska värden är 13,0 kWh/år/m2 Atemp, 49,7 kWh/år/m2 Atemp respektive 64,8 kWh/år/m2 Atemp. Slutsatser från arbetet är att byggnader från 1910-tal kan åtgärdas genom att isolera fönstren, sätta dit en extra dörr på insidan av ytterdörren samt tilläggsisolera snedtaket. Byggnader från 1930-tal kan åtgärdas genom att isolera fönstren med en isolerruta på insidan av fönstret och dörrarna med en extra dörr på insidan av ytterdörren. Byggnader från 1970-tal kan åtgärda fönstren genom att byta ut dem till energifönster, ingen åtgärd för golvet men fasaden isoleras utvändigt med vakuumisolering. Byggnaden från 1970-talet klarade sig bäst i jämförelsen eftersom den var i autentiskt skick från början vilket gjorde att förbättringen blev större än för till exempel byggnaden från 1910-talet som redan var ombyggd innan åtgärder föreslogs.

Steel Sheet Applications and Integrated Heat Management

Increasing energy use has caused many environmental problems including global warming. Energy use is growing rapidly in developing countries and surprisingly a remarkable portion of it is associated with consumed energy to keep the temperature comfortable inside the buildings. Therefore, identifying renewable technologies for cooling and heating is essential. This study introduced applications of steel sheets integrated into the buildings to save energy based on existing technologies. In addition, the proposed application was found to have a considerable chance of market success. Also, satisfying energy needs for space heating and cooling in a single room by using one of the selected applications in different Köppen climate classes was investigated to estimate which climates have a proper potential for benefiting from the application. This study included three independent parts and the results related to each part have been used in the next part. The first part recognizes six different technologies through literature review including Cool Roof, Solar Chimney, Steel Cladding of Building, Night Radiative Cooling, Elastomer Metal Absorber, and Solar Distillation. The second part evaluated the application of different technologies by gathering the experts’ ideas via performing a Delphi method. The results showed that the Solar Chimney has a proper chance for the market. The third part simulated both a solar chimney and a solar chimney with evaporation which were connected to a single well insulated room with a considerable thermal mass. The combination was simulated as a system to estimate the possibility of satisfying cooling needs and heating needs in different climate classes. A Trombe-wall was selected as a sample design for the Solar Chimney and was simulated in different climates. The results implied that the solar chimney had the capability of reducing the cooling needs more than 25% in all of the studied locations and 100% in some locations with dry or temperate climate such as Mashhad, Madrid, and Istanbul. It was also observed that the heating needs were satisfied more than 50% in all of the studied locations, even for the continental climate such as Stockholm and 100% in most locations with a dry climate. Therefore, the Solar Chimney reduces energy use, saves environment resources, and it is a cost effective application. Furthermore, it saves the equipment costs in many locations. All the results mentioned above make the solar chimney a very practical and attractive tool for a wide range of climates.

Mural Painting

For my freshman Jan Plan at Colby I painted a mural in Runnals Union illustrating a William Blake poem. This effort began a four year painting project which I pursued my sophomore and junior years by finishing the Hall of the Machines in Runnals and by commencing the Paper Wall in Roberts. As a Senior Scholar, I've continued my undertaking by painting eleven more panels. Eight of these are in the Paper Wall and the other three are in the Spa in Miller Library. In my wallpainting up until this year my major interest has been in a strong two-dimentional design created by color juxtaposition. Over these two semesters I've developed a greater concern with the role of color value contrasts in achieving a sense of three-dimensional space. As one views my paintings in chronological order, he can see that gradually colors become less intense, value contrasts more effective, and subject matter becomes based on observation rather than imagination. Please judge my achievement solely on observation of the walls in these three rooms as this paper is only a very brief catalogue of works and the slides are not the best reproductions.

Flood Risk Management In Small Urban River Using A Sustainable Urban Drainage System: Wortley Beck, Leeds, Uk

In the UK, urban river basins are particularly vulnerable to flash floods due to short and intense rainfall. This paper presents potential flood resilience approaches for the highly urbanised Wortley Beck river basin, south west of the Leeds city centre. The reach of Wortley Beck is approximately 6km long with contributing catchment area of 30km2 that drain into the River Aire. Lower Wortley has experienced regular flooding over the last few years from a range of sources, including Wortley Beck and surface and ground water, that affects properties both upstream and downstream of Farnley Lake as well as Wortley Ring Road. This has serious implications for society, the environment and economy activity in the City of Leeds. The first stage of the study involves systematically incorporating Wortley Beck’s land scape features on an Arc-GIS platform to identify existing green features in the region. This process also enables the exploration of potential blue green features: green spaces, green roofs, water retention ponds and swales at appropriate locations and connect them with existing green corridors to maximize their productivity. The next stage is involved in developing a detailed 2D urban flood inundation model for the Wortley Beck region using the CityCat model. CityCat is capable to model the effects of permeable/impermeable ground surfaces and buildings/roofs to generate flood depth and velocity maps at 1m caused by design storm events. The final stage of the study is involved in simulation of range of rainfall and flood event scenarios through CityCat model with different blue green features. Installation of other hard engineering individual property protection measures through water butts and flood walls are also incorporated in the CityCat model. This enables an integrated sustainable flood resilience strategy for this region.

Analise de estruturas de edificios altos submetidos a carregamentos horizontais e verticais

O presente trabalho tem como objetivo analisar os esforços em estruturas tridimensionais de edificios altos, quando submetidos a carregamentos horizontais e verticais. A estrutura é idealizada como um conjunto de pilares, paredes e vigas podendo ser dispostos de uma maneira assimétrica no plano da laje e variarem suas propriedades geométricas ao longo da altura. A análise é feita pelo método dos deslocamentos. Admite-se que as lajes em cada nível dos pavimentos tenham o funcionamento de diafragma rígido. São utilizados elementos de barra para representação das vigas e pilares. Para a determinação dos esforços em paredes resistentes são apresentados vários elementos obtidos pela analogia de pórticos. Tais elementos são incorporados ao programa possuindo uma formulação bem simples.

Estudo de solos subtropicais visando o emprego na construção de habitações de baixo custo

Esta pesquisa visa o estudo de características físicas e mecânicas de solos subtropicais, para aplicação na construção de habitações de baixo custo, abordando-se principalmente a técnica de construção com paredes monolíticas compactadas. A opçao pelo estudo do solo, realizado sem a adição de estabilizantes fisico-químicos, baseia-se no fato de que a mesma nem sempre é necessária, embora seja vital em alguns casos. Através da revisão de literatura, são ressaltadas as propriedades dos solos consideradas importantes para construção deste tipo de moradia, bem como os fatores envolvidos na durabilidade da mesma. Foi realizado o estudo de jazidas de solos, pertencentes a algumas das unidades geotécnicas da região metropolitana de Porto Alegre, levando-se sempre em conta este tipo de aplicação. Para tanto, são realizados ensaios laboratoriais de caracterização física dos solos, bem como de comportamento mecânico, testando-se resistência à compressão simples e à erosão, e absorção por capilaridade. Além disso, é feita a análise qualitativa da durabilidade de blocos compactados frente a exposição ao tempo. Estes blocos visam simular a condição de pequenos segmentos de paredes. Os resultados obtidos são analisados e comparados com as recomendações da prática deste tipo de construção, avaliando-se a validade das mesmas para o caso de solos tropicais e subtropicais

Estudo da viabilidade técnica para a Bolívia de painéis de gesso reforçados com fibra de vidro para paredes internas não portantes

Na construção civil, nos países em desenvolvimento como a Bolívia, continua-se usando técnicas e materiais na execução de paredes, similar a décadas passadas. Os painéis de gesso reforçados com fibra de vidro são uma alternativa de simplificação e agilização na execução das paredes internas não portantes. A presente dissertação objetiva mostrar a viabilidade técnica e econômica dos painéis para paredes internas, na Bolívia; para tanto realizou-se uma avaliação dos recursos disponíveis (gesso), com relação às reservas, produção e custos. A técnica adotada na produção dos painéis é a de pré-mistura, que permite a moldagem dos painéis manual ou mecanicamente com equipamentos simples e de baixo custo. O estudo do compósito de gesso reforçado com fibra de vidro (GRG) foi realizado com gesso brasileiro e com gesso boliviano, verificando-se o seu comportamento mecânico com diferentes teores de fibra de vidro. Verificou-se aumento da resistência a tração na flexão e diminuição da resistência a compressão com o aumento do teor de fibra de vidro. A avaliação do comportamento mecânico dos painéis foi feita através dos ensaios de impacto (corpo mole e corpo duro). Nos ensaios de corpo mole, verificou-se aumento da resistência com o aumento do teor de fibra de vidro. Os teores de 0,75% e 1,5% se mostraram suficientes para que os painéis de GRG satisfaçam os requisitos de desempenho para divisórias internas respectivamente para o gesso brasileiro e boliviano. O comportamento dos painéis nos ensaios de impacto de corpo duro foi satisfatório, tanto para painéis com fibra como para painéis sem fibra de vidro. No estudo preliminar de custos, verificou-se uma redução em torno de 36% para os painéis de GRG em relação às paredes intemas tradicionalmente usadas na Bolívia.

Resistência a penetração da chuva em fachadas de alvenaria de materiais cerâmicos : uma análise de desempenho

Nesse trabalho abordam-se de maneira geral a diversas características e propriedades dos materiais que influem na penetração da água em fachadas de alvenaria. Analiza-se os principais mecanismos de infiltraçao da água bem como o comportamento da água sobre a superfície das fachadas. Uma análise também é feita com respeito a determinação do grau de exposição da fachada. Com o fim de avaliar o desempenho de fachadas de alvenaria, com relação a sua resistência a penetração da chuva, utiliza-se a metodologia de desempenho. Faz-se uma aplicação prática para as condições de Porto Alegre, apresentando-se os resultados obtidos.

Mudanças na Natureza do Comércio no Mundo conectado através do E-commerce

The Internet has taken the world by storm. It has eliminated the barriers of technology, and unlocked the doors to electronic commerce and the 'Virtual Economy'. It has given us a glimpse into the future of 'Business' itself, and it has created a bewildering variety of choices in our personal and professional lives. It has taken on a life of its own, and we are all frantically trying to keep up. Many overwhelmed companies are asking questions like: 'What should our Internet Strategy be?' Or 'How do we put our business on the Internet like everybody else is doing?' or 'How do we use this thing to make money without spending any?'. These questions may seem reasonable on the surface, but they miss the point because they focus on the technologies rather than the core issues of conducting day-to-day business. The Internet can indeed offer fast returns in marketing reach, speed, director consumer sales and so on, and many companies are using it to good advantage, but the highest and best use of any such technology is to support, enhance and even re-invent the fundamentals of general business practice. When the initial excitement is over, and companies gain experience and confidence with the new business models, this larger view will begin to assert itself. Companies will then start to position their 'Internet Strategies' in context of where the business world itself is going over time, and how they can prepare for what is to come. Until now, the business world has been very fragmented, its collective progress limited (in part) by the inability to communicate within and between companies. Now that the technical remedy seems to be at hand and standards are beginning to emerge, we are starting to see a trend toward consolidation, cooperation, and economic synergy. Companies are improving their internal business processes with Intranets, and Electronic Commerce initiatives have sprung up using EDI, the World Wide Web, E-Mail, secure credit card payments and other tools. Companies are using the Internet to talk to each other and to sell their goods and services to the end consumer. Like Berlin, the walls are coming down because they have to. Electronic 'Communities of Common Interest' are beginning to surface, with the goal of supporting and aligning similar industries (such as Government, Insurance, Transportation and Health care) or similar business functions (such as Purchasing, Payments, and Human Resources). As these communities grow and mature, their initial scope will broaden and their spheres of influence will expand. They will begin to overlap into other communities, creating a synergistic effect and reshaping the conduct of business. The business world will undergo a gradual evolution toward globalization, driven by economic imperatives and natural selection in the marketplace, and facilitated by Electronic Commerce and Internet technologies. The business world 'beyond 2000' will have a substantially different look and feel than that which we see today.