Brisbane Airport Atelier : Team Delta

This architectural and urban design project was conducted as part of the Brisbane Airport Corporations master-planning Atelier, run in conjunction with City Lab. This creation and innovation event brought together approximately 80 designers, associated professionals, and both local and state government representatives to research concepts for future development and planning of the Brisbane airport site. The Team Delta research project explored the development of a new precinct cluster around the existing international terminal building; with a view of reinforcing the sense of place and arrival. The development zone explores the options of developing a subtropical character through landscape elements such as open plazas, tourist attractions, links to existing adjacent waterways, and localised rapid transport options. The proposal tests the possibilities of developing a cultural hub in conjunction with transport infrastructure and the airport terminal(s).

Project 2.7 Leveraging R&D Investment for the Australian built environment : Phase 2 Case Study Reports Part 1 - Overview of Findings

This report provides an overview of findings of qualitative research comprising three case studies undertaken as a part of the retrospective analysis component of Sustainable Built Environment National Research Centre (SBEnrc) Project 2.7 Leveraging R&D investment for the Australian Built Environment. These case studies (see Parts 2, 3 and 4 of this suite of reports) were undertaken to illustrate the nature of past R&D investments in Australia. This was done to complement: (i) the audit and analysis of past R&D investment undertaken by Thomas Barlow (2011); and (ii) the Construction 2030 roadmap being developed by Swinburne University of Technology and Professor Göran Roos from VTT Technical Research Centre of Finland. These documents will be the basis for the final phase of the present project - developing policy guidelines for future R&D investment in the Australian built environment. Refer also Parts 1, 2 and 3 for detail findings.

Project 2.7 Leveraging R&D Investment for the Australian built environment : Phase 2 Case Study Report Part 4 - CADD, BIM and IPD

This report discusses findings of a case study into "CADD, BIM and IPD" undertaken as a part of the retrospective analysis component of Sustainable Built Environment National Research Centre (SBEnrc) Project 2.7 Leveraging R&D investment for the Australian Built Environment. This case study investigated the evolution that has taken place in the Queensland Department of Public Works Division of Project Services during the last 20 years from: the initial implementation of computer aided design and documentation(CADD); to the experimentation with building information modelling (BIM) from the mid 2000’s; embedding integrated practice (IP); to current steps towards integrated project delivery (IPD) with the integration of contractors in the design/delivery process. This case study should be read in conjunction with Part 1 of this suite of reports.

Antecedents of sustainable management support for IT-related initiatives

Having IT-related capabilities is not enough to secure value from the IT resources and survive in today’s competitive environment. IT resources evolve dynamically and organisations must sustain their existing capabilities to continue to leverage value from their IT resources. Organisations’ IT-related management capabilities are an important source of their competitive advantage. We suggest that organisations can sustain these capabilities through appropriate considerations of resources at the technology-use level. This study suggests that an appropriate organisational design relating to decision rights and work environment, and a congruent reward system can create a dynamic IT-usage environment. This environment will be a vital source of knowledge that could help organisations to sustain their IT-related management capabilities. Analysis of data collected from a field survey demonstrates that this dynamic IT-usage environment, a result of the synergy between complementary factors, helps organisations to sustain their IT-related management capabilities. This study adds an important dimension to understanding why some organisations continue to perform better with their IT resources than others. For practice, this study suggests that organisations need to consider a comprehensive approach to what constitutes their valuable resources.

Antecedents of sustainable management support for IT related initiatives

Having IT-related capabilities is not enough to secure value from IT resources and survive in today’s competitive environment. IT resources evolve dynamically and firms must sustain their existing capabilities to continue to leverage value from their IT resources. Firm’s human resources are an important IT-related capability, and an important source of their competitive advantage. Using a field survey, this study demonstrates that a dynamic end-user environment, a result of a coordinated change in complementary factors can help sustain firms’ IT-related management capabilities. These factors include an appropriate organizational design to decision rights and work environment and a congruent reward system. This study adds an important dimension in understanding why some firms continue to perform better with their IT resources than others. For practice, this study suggests that a comprehensive approach to what constitutes valuable organizational resources is necessary.

Developing sustainable IT-related capabilities : instrument development and test

Research has established that firms' IT-related capabilities at a point in time explain IT-related performance differences across firms. IT resources, however, are dynamic, and evolve at an exponential rate. This means we need to understand how to sustain firms' existing capabilities to leverage opportunities offered by new IT resources. Wet suggests a higher-level resource that can sustain firms' existing IT-related capabilities. Second, we report on the development of a valid and reliable measurement instrument for measuring this higher-level resource in four stages, which includes expert feedback and a field test. The validated instrument would be useful in extending the IT business value studies to investigate how firms can sustain their IT-related capabilities. This effort will provide a deeper understanding of how firms can secure sustainable IT-related business value from their acquired IT resources.

Building the profession together : towards holistic library and information science education

How can a holistic approach to library and information science education encompassing vocational and university sectors that meets the future information workforce requirements be achieved? This paper will outline a twelve month national project that considered this very question. Funded by the Australian Learning and Teaching Council (ALTC).

Green buildings for greying people : a case study of a retirement village in Australia

Purpose With an increasingly ageing population and widespread acceptance of the need for sustainable development in Australia, the demand for green retirement villages is increasing. This paper aims to identify the critical issues to be considered by developers and practitioners when embarking on their first green residential retirement project in Australia. Design/methodology/approach In view of the lack of adequate historical data for quantitative analysis, a case study approach is employed to examine the successful delivery of green retirement villages. Face-to-face interviews and document analysis were conducted for data collection. Findings The findings of the study indicate that one of the major obstacles to the provision of affordable green retirement villages is the higher initial costs involved. However, positive aspects were identified, the most significant of which relate to: the innovative design of site and floor plans; adoption of thermally efficient building materials; orientation of windows; installation of water harvesting and recycling systems, water conservation fittings and appliances; and waste management during the construction stage. With the adoption of these measures, it is believed that sustainable retirement development can be achieved without significant additional capital costs. Practical implications The research findings serve as a guide for developers in decision making throughout the project life-cycle when introducing green features into the provision of affordable retirement accommodation. Originality/value This paper provides insights into the means by which affordable green residential retirement projects for aged people can be successfully completed.

Creativity in policing: building the necessary skills to solve complex and protracted investigations

Despite an increased focus on proactive policing in recent years, criminal investigation is still perhaps the most important task of any law enforcement agency. As a result, the skills required to carry out a successful investigation or to be an ‘effective detective’ have been subjected to much attention and debate (Smith and Flanagan, 2000; Dean, 2000; Fahsing and Gottschalk, 2008:652). Stelfox (2008:303) states that “The service’s capacity to carry out investigations comprises almost entirely the expertise of investigators.” In this respect, Dean (2000) highlighted the need to profile criminal investigators in order to promote further understanding of the cognitive approaches they take to the process of criminal investigation. As a result of his research, Dean (2000) produced a theoretical framework of criminal investigation, which included four disparate cognitive or ‘thinking styles’. These styles were the ‘Method’, ‘Challenge’, ‘Skill’ and ‘Risk’. While the Method and Challenge styles deal with adherence to Standard Operating Procedures (SOPs) and the internal ‘drive’ that keeps an investigator going, the Skill and Risk styles both tap on the concept of creativity in policing. It is these two latter styles that provide the focus for this paper. This paper presents a brief discussion on Dean’s (2000) Skill and Risk styles before giving an overview of the broader literature on creativity in policing. The potential benefits of a creative approach as well as some hurdles which need to be overcome when proposing the integration of creativity within the policing sector are then discussed. Finally, the paper concludes by proposing further research into Dean’s (2000) skill and risk styles and also by stressing the need for significant changes to the structure and approach of the traditional policing organisation before creativity in policing is given the status it deserves.

An accounting standard for nonprofits : the missing essential building blocks

There have been numerous calls over the years for the development of an accounting standard for not-for-profit entities (NFPEs). Probably the most commonly quoted in this regard is that from the Industry Commission Report No. 45 in 1995 which contained the following recommendation: The Commonwealth government should provide funds to the Australian Accounting Standards Board and the Public Sector Accounting Standards Board to develop within two years suitable accounting standards for Community Social Welfare Organisations. This recommendation was made over 5-years ago. Why has no action been taken towards its implementation?...

Sustainable urban transport : smart technology initiatives in Singapore

Achieving sustainability is one of the major goals of many urban transportation systems. Over the years, many innovative policies have been attempted to achieve an efficient, safe, and sustainable transport system. Those policies often require smart technologies to assist implementation process and enhance effectiveness. This paper discusses how sustainability can be promoted by embedding smart technologies in a modern transportation system. In particular, this paper studies the transport system of Singapore to address how this system is addressing sustainability through the use of smart technologies. Various technological initiatives in managing traffic flow, monitoring and enforcement, sharing real-time information, and managing revenues are discussed in light of their potentiality in addressing sustainability issues. The Singapore experience provides a useful reference for the cities intending to develop and promote a sustainable transport system.

Evaluation of the control of carbon emissions of construction facilities in Hong Kong

This paper investigates the policies and instruments adopted in Hong Kong to control the carbon emissions of construction facilities, including the whole building life cycle: production of material stage, construction stage, operation stage and demolition stage. This commences with a literature review comparing activities world-wide to those in Hong Kong to identify the main issues at stake, followed by a report on a series of local interviews to evaluate the present situation in Hong Kong, as well as future opportunities for local carbon mitigation. The interviewees included practitioners from engineering contracting firms, consulting firms, clients and energy provider, together with two university experts and a counsellor. A small case study is also provided of a building project in Hong Kong to illustrate some of the innovative design aspects being incorporated into buildings in Hong Kong as a result of the current emphasis on sustainability. The paper concludes with a summary of main findings and proposals for improvement in policy related to carbon mitigation and building sustainability in Hong Kong.

A hierarchical evolutionary algorithmic design (HEAD) system for generating and evolving building design models

This thesis develops a detailed conceptual design method and a system software architecture defined with a parametric and generative evolutionary design system to support an integrated interdisciplinary building design approach. The research recognises the need to shift design efforts toward the earliest phases of the design process to support crucial design decisions that have a substantial cost implication on the overall project budget. The overall motivation of the research is to improve the quality of designs produced at the author's employer, the General Directorate of Major Works (GDMW) of the Saudi Arabian Armed Forces. GDMW produces many buildings that have standard requirements, across a wide range of environmental and social circumstances. A rapid means of customising designs for local circumstances would have significant benefits. The research considers the use of evolutionary genetic algorithms in the design process and the ability to generate and assess a wider range of potential design solutions than a human could manage. This wider ranging assessment, during the early stages of the design process, means that the generated solutions will be more appropriate for the defined design problem. The research work proposes a design method and system that promotes a collaborative relationship between human creativity and the computer capability. The tectonic design approach is adopted as a process oriented design that values the process of design as much as the product. The aim is to connect the evolutionary systems to performance assessment applications, which are used as prioritised fitness functions. This will produce design solutions that respond to their environmental and function requirements. This integrated, interdisciplinary approach to design will produce solutions through a design process that considers and balances the requirements of all aspects of the design. Since this thesis covers a wide area of research material, 'methodological pluralism' approach was used, incorporating both prescriptive and descriptive research methods. Multiple models of research were combined and the overall research was undertaken following three main stages, conceptualisation, developmental and evaluation. The first two stages lay the foundations for the specification of the proposed system where key aspects of the system that have not previously been proven in the literature, were implemented to test the feasibility of the system. As a result of combining the existing knowledge in the area with the newlyverified key aspects of the proposed system, this research can form the base for a future software development project. The evaluation stage, which includes building the prototype system to test and evaluate the system performance based on the criteria defined in the earlier stage, is not within the scope this thesis. The research results in a conceptual design method and a proposed system software architecture. The proposed system is called the 'Hierarchical Evolutionary Algorithmic Design (HEAD) System'. The HEAD system has shown to be feasible through the initial illustrative paper-based simulation. The HEAD system consists of the two main components - 'Design Schema' and the 'Synthesis Algorithms'. The HEAD system reflects the major research contribution in the way it is conceptualised, while secondary contributions are achieved within the system components. The design schema provides constraints on the generation of designs, thus enabling the designer to create a wide range of potential designs that can then be analysed for desirable characteristics. The design schema supports the digital representation of the human creativity of designers into a dynamic design framework that can be encoded and then executed through the use of evolutionary genetic algorithms. The design schema incorporates 2D and 3D geometry and graph theory for space layout planning and building formation using the Lowest Common Design Denominator (LCDD) of a parameterised 2D module and a 3D structural module. This provides a bridge between the standard adjacency requirements and the evolutionary system. The use of graphs as an input to the evolutionary algorithm supports the introduction of constraints in a way that is not supported by standard evolutionary techniques. The process of design synthesis is guided as a higher level description of the building that supports geometrical constraints. The Synthesis Algorithms component analyses designs at four levels, 'Room', 'Layout', 'Building' and 'Optimisation'. At each level multiple fitness functions are embedded into the genetic algorithm to target the specific requirements of the relevant decomposed part of the design problem. Decomposing the design problem to allow for the design requirements of each level to be dealt with separately and then reassembling them in a bottom up approach reduces the generation of non-viable solutions through constraining the options available at the next higher level. The iterative approach, in exploring the range of design solutions through modification of the design schema as the understanding of the design problem improves, assists in identifying conflicts in the design requirements. Additionally, the hierarchical set-up allows the embedding of multiple fitness functions into the genetic algorithm, each relevant to a specific level. This supports an integrated multi-level, multi-disciplinary approach. The HEAD system promotes a collaborative relationship between human creativity and the computer capability. The design schema component, as the input to the procedural algorithms, enables the encoding of certain aspects of the designer's subjective creativity. By focusing on finding solutions for the relevant sub-problems at the appropriate levels of detail, the hierarchical nature of the system assist in the design decision-making process.

Breaking organizational barriers for greening Australian

Sustainability is an issue for everyone. For instance, the higher education sector is being asked to take an active part in creating a sustainable future, due to their moral responsibility, social obligation, and their own need to adapt to the changing higher education environment. By either signing declarations or making public statements, many universities are expressing their desire to become role models for enhancing sustainability. However, too often they have not delivered as much as they had intended. This is particularly evident in the lack of physical implementation of sustainable practices in the campus environment. Real projects such as green technologies on campus have the potential to rectify the problem in addition to improving building performance. Despite being relatively recent innovations, Green Roof and Living Wall have been widely recognized because of their substantial benefits, such as runoff water reduction, noise insulation, and the promotion of biodiversity. While they can be found in commercial and residential buildings, they only appear infrequently on campuses as universities have been very slow to implement sustainability innovations. There has been very little research examining the fundamental problems from the organizational perspective. To address this deficiency, the researchers designed and carried out 24 semi-structured interviews to investigate the general organizational environment of Australian universities with the intention to identify organizational obstacles to the delivery of Green Roof and Living Wall projects. This research revealed that the organizational environment of Australian universities still has a lot of room to be improved in order to accommodate sustainability practices. Some of the main organizational barriers to the adoption of sustainable innovations were identified including lack of awareness and knowledge, the absence of strong supportive leadership, a weak sustainability-rooted culture and several management challenges. This led to the development of a set of strategies to help optimize the organizational environment for the purpose of better decision making for Green Roof and Living Wall implementation.