Indicia mineralogiae in Fennia sub gentilismo

Invocatio: I.N.D.

An mysterium S.S. Trinitatis veteribus Scandianis sub gentilismo fuerit cognitum?

Invocatio: I.N.D.O.M.

Comparison of USEPA 3050B and ISO 14869-1: 2001 digestion methods for sediment analysis by using FAAS and ICP-OES quantification techniques

A study of the partial USEPA 3050B and total ISO 14869-1:2001 digestion methods of sediments was performed. USEPA 3050B was recommended as the simpler method with less operational risk. However, the extraction ability of the method should be taken in account for the best environmental interpretation of the results. FAAS was used to quantify metal concentrations in sediment solutions. The alternative use of ICP-OES quantification should be conditioned by a previous detailed investigation and eventual correction of the matrix effect. For the first time, the EID method was employed for the detection and correction of the matrix effect in sediment ICP-OES analysis. Finally, some considerations were made about the level of metal contamination in the area under study.

Authenticity study of Phyllanthus species by NMR and FT-IR Techniques coupled with chemometric methods

The importance of medicinal plants and their use in industrial applications is increasing worldwide, especially in Brazil. Phyllanthus species, popularly known as "quebra-pedras" in Brazil, are used in folk medicine for treating urinary infections and renal calculus. This paper reports an authenticity study, based on herbal drugs from Phyllanthus species, involving commercial and authentic samples using spectroscopic techniques: FT-IR, ¹H HR-MAS NMR and ¹H NMR in solution, combined with chemometric analysis. The spectroscopic techniques evaluated, coupled with chemometric methods, have great potential in the investigation of complex matrices. Furthermore, several metabolites were identified by the NMR techniques.

Fourier transform infrared-attenuated total reflectance (FTIR-ATR) spectroscopy and chemometric techniques for the determination of adulteration in petrodiesel/biodiesel blends

We propose an analytical method based on fourier transform infrared-attenuated total reflectance (FTIR-ATR) spectroscopy to detect the adulteration of petrodiesel and petrodiesel/palm biodiesel blends with African crude palm oil. The infrared spectral fingerprints from the sample analysis were used to perform principal components analysis (PCA) and to construct a prediction model using partial least squares (PLS) regression. The PCA results separated the samples into three groups, allowing identification of those subjected to adulteration with palm oil. The obtained model shows a good predictive capacity for determining the concentration of palm oil in petrodiesel/biodiesel blends. Advantages of the proposed method include cost-effectiveness and speed; it is also environmentally friendly.

Interação de complexo de rutênio com albumina de soro bovino para detecção amperométrica de ácido ascórbico

The binding of [Ru(PAN)(PPh3)2(ISN)]Cl (PAN = 1-(2'-Pyridylazo)-2-naphtholate) to bovine serum albumin (BSA) was investigated by spectroscopic techniques. According to analysis of the results from the Stern-Volmer equation, the ruthenium complex is able to quench the fluorescence intensity of BSA via a dynamic mechanism. The thermodynamic parameters were calculated (ΔH = 30.3 kJ mol-1; ΔS = 195.4 J mol-1 K-1), indicating that hydrophobic force is the main interaction driving force. The site marker competitive experiments revealed that the binding site of ruthenium complex was in the sub-domain IIA of BSA. FTO glass with a film of BSA-[Ru(PAN)(PPh3)2(ISN)]Cl was used as an ascorbic acid sensor. The linear range of the modified electrode was between 1 and 8 × 10-6 mol L-1.

TREATMENT OF WASTE FROM ATOMIC EMISSION SPECTROMETRIC TECHNIQUES AND REUSE IN UNDERGRADUATE LAB CLASSES FOR QUALITATIVE ANALYSIS

Flame atomic absorption spectrometry (FAAS) and inductively coupled plasma optical emission spectrometry (ICP OES) are widely used in academic institutions and laboratories for quality control to analyze inorganic elements in samples. However, these techniques have been observed to underperform in sample nebulization processes. Most of the samples processed through nebulization system are discarded, producing large volumes of waste. This study reports the treatment and reuse of the waste produced from ICP OES technique in a laboratory of analytical research at the Universidade Federal do Ceará, Brazil. The treatment of the waste was performed by the precipitation of elements using (NH4)2CO3. Subsequently, the supernatant solution can be discarded in accordance with CONAMA 430/2011. The precipitate produced from the treatment of residues can be reused as a potential sample in undergraduate qualitative analytical chemistry lab classes, providing students the opportunity to test a real sample.

COMPARISON BETWEEN ASPHALTENES (SUB)FRACTIONS EXTRACTED FROM TWO DIFFERENT ASPHALTIC RESIDUES: CHEMICAL CHARACTERIZATION AND PHASE BEHAVIOR

Asphaltenes are blamed for various problems in the petroleum industry, especially formation of solid deposits and stabilization of water-in-oil emulsions. Many studies have been conducted to characterize chemical structures of asphaltenes and assess their phase behavior in crude oil or in model-systems of asphaltenes extracted from oil or asphaltic residues from refineries. However, due to the diversity and complexity of these structures, there is still much to be investigated. In this study, asphaltene (sub)fractions were extracted from an asphaltic residue (AR02), characterized by NMR, elemental analysis, X-ray fluorescence and MS-TOF, and compared to asphaltene subfractions obtained from another asphaltic residue (AR01) described in a previous article. The (sub)fractions obtained from the two residues were used to prepare model-systems containing 1 wt% of asphaltenes in toluene and their phase behavior was evaluated by measuring asphaltene precipitation onset using optical microscopy. The results obtained indicated minor differences between the asphaltene fractions obtained from the asphaltic residues of distinct origins, with respect to aromaticity, elemental composition (CHN), presence and content of heteroelements and average molar mass. Regarding stability, minor differences in molecule polarity appear to promote major differences in the phase behavior of each of the asphaltene fractions isolated.

VOC emissions and control techniques in softwood veneer dryers

The objective in this Master’s Thesis was to determine VOC emissions from veneer drying in softwood plywood manufacturing. Emissions from plywood industry have become an important factor because of the tightened regulations worldwide. In this Thesis is researched quality and quantity of the VOCs from softwood veneer drying. One of the main objectives was to find out suitable cleaning techniques for softwood VOC emissions. In introduction part is presented veneer drying machines, wood mechanical and chemical properties. VOC control techniques and specified VOC limits are introduced also in the introduction part. Plywood mills have not had interest to VOC emissions previously nevertheless nowadays plywood mills worldwide must consider reduction of the emissions. This Thesis includes measuring of emissions from softwood veneer dryer, analyzation of measured test results and reviewing results. Different air conditions inside of the dryer were considered during planning of the measurements. Results of the emissions measurements were compared to the established laws. Results from this Thesis were softwood veneer dryer emissions in different air conditions. Emission control techniques were also studied for softwood veneer dryer emissions for further specific research.

Ohutlevytuotteen valmistuskustannusten määrittely suunnitteluvaiheessa

Diplomityössä kehitetään ABB Oy Drives:lle menetelmää, jolla voidaan ennustaa ohutlevyosien ja niistä koostuvien kokoonpanojen hintaa ilman tarkkaa valmistuksellista geometriatietoa. Työ on osa Tekesin rahoittamaa Piirre 2.0 -projektia. Työn teoriaosa määrittelee lyhyesti ohutlevytuotteet ja niiden valmistusmenetelmät. Laajemmassa teoriatarkastelussa ovat erilaiset ohutlevytuotteiden valmistuskustannusten ennustamismenetelmät regressioanalyysin käyttöön painottuen. Käytännön osiossa määritetään Finn-Power LP6 -levytyökeskuksen suorituskyky ja muodostetaan työaikalaskuri kerättyyn tietoon perustuen. Lisäksi muodostetaan regressioanalyysit kahden eri alihankkijan valmistamien ohutlevytuotteiden pohjalta. Regressiotekniikoiden avulla etsitään kustannuksiin voimakkaasti vaikuttavat parametrit ja muodostetaan laskukaava valmistuskustannusten ennustamiseen. Lopuksi vertaillaan teorian ja käytännön osien yhteensopivuutta ja etsitään syitä havaittuihin eroihin. Tutkimustulosten hyödyntämismahdollisuuksien ohella esitetään myös eräitä jatkokehitysehdotuksia.

Energiatiedon hallintajärjestelmän suorituskyvyn määrittäminen ja todentaminen

Sähkömarkkinoiden vapautumisen jälkeen energia-alalle on muodostunut entistä suurempi kysyntä kehittyneille energiatiedon hallintaaan erikoistuneille tietojärjestelmille. Uudet lakisäädökset sekä tulevaisuuden kokonaisvaltaiset tiedonkeruujärjestelmät, kuten älykkäät mittarit ja älykkäät sähköverkot, tuovat mukanaan entistä suuremman prosessoitavan tietovirran. Nykyaikaisen energiatietojärjestelmän on kyettävä vastaamaan haasteeseen ja palveltava asiakkaan vaatimuksia tehokkaasti prosessien suorituskyvyn kärsimättä. Tietojärjestelmän prosessien on oltava myös skaalautuvia, jotta tulevaisuuden lisääntyneet prosessointitarpeet ovat hallittavissa. Tässä työssä kuvataan nykyaikaisen energiatietojärjestelmän keskeiset energiatiedon hallintaan ja varastointiin liittyvät komponentit. Työssä esitellään myös älykkäiden mittareiden perusperiaate ja niiden tuomat edut energia-alalla. Lisäksi työssä kuvataan visioita tulevaisuuden älykkäiden sähköverkkojen toteutusmahdollisuuksista. Diplomityössä esitellään keskeisiä suorituskykyyn liittyviä kokonaisuuksia. Lisäksi työssä kuvataan keskeiset suorituskyvyn mittarit sekä suorituskykyvaatimukset. Järjestelmän suorituskyvyn arvioinnin toteuttamiseen on erilaisia menetelmiä, joista tässä työssä kuvataan yksi sen keskeisine periaatteineen. Suorituskyvyn analysointiin käytetään erilaisia tekniikoita, joista tässä diplomityössä esitellään tarkemmin järjestelmän mittaus. Työssä toteutetaan myös case-tutkimus, jossa analysoidaan mittaustiedon sisääntuontiin käytettävän prosessin kahta eri kehitysversiota ja näiden suorituskykyominaisuuksia. Kehitysversioiden vertailussa havaitaan, että uusi versio on selkeästi edellistä versiota nopeampi. Case-tutkimuksessa määritetään myös suorituskyvyn kannalta optimaalinen rinnakkaisprosessien määrä ja tutkitaan prosessin skaalautuvuutta. Tutkimuksessa todetaan, että uusi kehitysversio skaalautuu lineaarisesti.

Salesperson's customer orientation in the personal selling process and in the use of personal selling techniques in the business-to-business setting

Selling is much maligned, often under-valued subject whose inadequate showing in business schools is in inverse proportion to the many job opportunities it offers and the importance of salespeople bringing incomes to companies. The purpose of this research is to increase the understanding of customer-oriented selling and examine the influence of customer-oriented philosophy on selling process, the applicability of selling techniques to this philosophy and the importance of them to salespeople. The empirical section of the study is two-fold. Firstly, the data of qualitative part was collected by conducting five thematic interviews among sales consultants and case company representatives. The findings of the study indicate that customer-oriented selling requires the activity of salespeople. In the customer-oriented personal selling process, salespeople invest time in the preplanning, the need analysis and the benefit demonstration stages. However, the findings propose that salespeople today must also have the basic capabilities for executing the traditional sales process, and the balance between traditional and consultative selling process will change as the duration of the relationship between the salesperson and customer increases. The study also proposes that selling techniques still belong to the customer-oriented selling process, although their roles might be modest. This thesis mapped 75 selling techniques and the quantitative part of the study explored what selling techniques are considered to be important by salespeople in direct selling industry when they make sales with new and existing customers. Response rate of the survey was 69.5%.

Flavonoid extraction from Alpinia zerumbet (Pers.) Burtt et Smith leaves using different techniques and solvents

The current study aims to verify the best method for a rapid and efficient extraction of flavonoids from Alpinia zerumbet. Dried leaves were extracted using distillated water and ethanol 70% by extraction methods of shaking maceration, ultrasonic, microwave and stirring. By the application of TLC and reversed-phase HPLC techniques the rutin and kaempferol-3-O-glucuronide were detected. Ethanol 70% was more efficient for flavonoids extraction than water. No significant yielding variation was verified for ultrasonic, microwave and stirring methods using ethanol 70% (11 to 14%). The relative concentration of rutin and kaempferol-3-O-glucuronide, respectively, was higher by ultrasonic (1.5 and 5.62 mg g-1 dried leaves, respectively) and by microwave (1.0 and 6.64 mg g-1 dried leaves) methods using ethanol. Rapid and simplified extraction proceeding optimize phytochemical work and acquisition of secondary metabolites.