Reliability based design optimisation for system-in-package

This paper discusses a reliability based optimisation modelling approach demonstrated for the design of a SiP structure integrated by stacking dies one upon the other. In this investigation the focus is on the strategy for handling the uncertainties in the package design inputs and their implementation into the design optimisation modelling framework. The analysis of fhermo-mechanical behaviour of the package is utilised to predict the fatigue life-time of the lead-free board level solder interconnects and warpage of the package under thermal cycling. The SiP characterisation is obtained through the exploitation of Reduced Order Models (ROM) constructed using high fidelity analysis and Design of Experiments (DoE) methods. The design task is to identify the optimal SiP design specification by varying several package input parameters so that a specified target reliability of the solder joints is achieved and in the same time design requirements and package performance criteria are met

Leadership and management standards in the UK Lifelong Learning sector

Leadership and Management Standards in the UK Lifelong Learning Sector. Presentation on research findings on leadership and management in the LLS sector, in the context of UK government policy changes introducing the 2007 Principals' Qualifying Programme (PQP) delivered by the Centre for Excellence in Leadership (CEL)/Learning and Skills Improvement Service (LSIS). Discusses the role of standards in leadership and management professional practice and development and sums up the history of development of standards in relation to the National Occupational Standards (NOS) for Leadership and Management, based on the UK Management Standards Centre (MSC) Institute for Leadership and Management Standards. Discusses the Lifelong Learning UK (LLUK) Benchmark Role Specification for Principals in FE, Sixth Form and Specialist Colleges and the fact that the LSIS PQP has adopted those as part of its programme for Principal development. In the context of the implementation of standards for leadership and management, discusses the importance of values-based and research-informed leadership and the development of trust in lifelong learning sector institutions, given the multiple challenges facing vocational education and training (VET) institutions and the relative lack of recognition and support for the difficult roles taken on by Principals and senior leaders.

Grid effects

Zaha Hadid's Kartal Pendik Masterplan (2006) for a new city centre on the east bank of Istanbul proposes the redevelopment of an abandoned industrial site located in a crucial infrastructural node between Europe and Asia as a connecting system between the neighbouring areas of Kartal in the west and Pendik in the east. The project is organised on what its architects call a soft grid, a flexible and adaptable grid that allows it to articulate connections and differences of form, density and use within the same spatial structure [1]. Its final overall design constitutes only one of the many possible configurations that the project may take in response to the demands of the different areas included in the masterplan, and is produced from a script that is able to generate both built volumes and open spaces, skyscrapers as well as parks. The soft grid in fact produces a ‘becoming’ rather than a finite and definitive form: its surface space does not look like a grid, but is derived from a grid operation which is best explained by the project presentation in video animation. The grid here is a process of ‘gridding’, enacted according to ancient choreographed linear movements of measuring, defining, adjusting, reconnecting spaces through an articulated surface rather than superimposed on an ignored given like an indifferent colonising carpet.

Towards Data Management Planning Support for Research Data

Görzig, H., Engel, F., Brocks, H., Vogel, T. & Hemmje, M. (2015, August). Towards Data Management Planning Support for Research Data. Paper presented at the ASE International Conference on Data Science, Stanford, United States of America.

The Power of Plankton

This animation is aimed at all age groups of the general public. The animation promotes the importance of plankton and the long term Continuous Plankton Recorder (CPR) survey.

Social Work and theatre: considering intersections

Theatre is a cultural and artistic form that involves a process of communication between creators and is received in a space and time located in the public sphere, which has meant that, over the centuries, it has acted as a space for expression, exchange and debate regarding all manner of ideas, causes and struggles. Implicit within this process are processes of expression, creation and reception, by way of which people demonstrate, analyse and question ways of seeing and understanding life, and ways of being and existing in the world. This gives rise to educational, cultural, social and political potential, which has been endorsed in numerous studies and investigations. In this work, in which theoretical orientation is established through a review of the relevant literature, we consider different intersections that occur between theatre and social work in order to also show that dramatic and theatrical expression offers substantive methodologies for achieving some objectives of social work, particularly in areas such as critical literacy, reflexivity and recognition, awareness raising, social participation, personal and/or community development, ownership of cultural capital and access to personal and social wellbeing.

Flavian laws, the railway, the newspaper and Loring’s breads

It is abound the research on the formation, rise and failure of the financial and industrial network undertaken by the Loring-Heredia-Larios triangle, bourgeois families who introduced the Industrial Revolution in the south of Andalusia. On the contrary, there are almost nonexistent studies from the perspective of the mentality that sustained their business, social and ethical model in the algid decades of their action (1850-1860). In this paper we propose some hypotheses about the ideological structures of bourgeois group and point out some keys, clues and signs for a future reconstruction of this kind, which so far has not been incardinated that early and failed malaguenan industrial revolution in streams thinking of that time.

Analysis and Synthesis of pHEMT Class-E Amplifiers with Shunt Inductor including ON-State Active-Device Resistance Effects

In this theoretical paper, the analysis of the effect that ON-state active-device resistance has on the performance of a Class-E tuned power amplifier using a shunt inductor topology is presented. The work is focused on the relatively unexplored area of design facilitation of Class-E tuned amplifiers where intrinsically low-output-capacitance monolithic microwave integrated circuit switching devices such as pseudomorphic high electron mobility transistors are used. In the paper, the switching voltage and current waveforms in the presence of ON-resistance are analyzed in order to provide insight into circuit properties such as RF output power, drain efficiency, and power-output capability. For a given amplifier specification, a design procedure is illustrated whereby it is possible to compute optimal circuit component values which account for prescribed switch resistance loss. Furthermore, insight into how ON-resistance affects transistor selection in terms of peak switch voltage and current requirements is described. Finally, a design example is given in order to validate the theoretical analysis against numerical simulation.

Performance assessment of nanoscale double- and triple- gate FinFETs

This is the first paper to describe performance assessment of triple and double gate FinFETs for High Performance (HP), Low Operating Power (LOP) and Low Standby Power (LSTP) logic technologies is investigated. The impact of gate work-function, spacer width, lateral source/drain doping gradient, fin aspect ratio, fin thickness on device performance, has been analysed in detail and guidelines are presented to meet ITRS specification at 65 and 45 nm nodes. Optimal design of lateral source/drain doping profile can not only effectively control short channel effects, yielding low off-current, but also achieve low values of intrinsic gate delay.

Using choice experiments to explore the spatial distribution of willingness to pay for rural landscape improvements

We report findings from a choice experiment survey designed to estimate the economic benefits of policy measures to improve the rural landscape in the Republic of Ireland. Using a panel mixed logit specification to account for unobserved taste heterogeneity we derived individual-specific willingness-to-pay (WTP) estimates for each respondent in the sample. We subsequently investigated the spatial dependence of these estimates. Results suggest the existence of positive spatial autocorrelation for all rural landscape attributes. As a means of benefit transfer, kriging methods were employed to interpolate WTP estimates across the whole of the Republic of Ireland. The kriged WTP surfaces confirm the existence of spatial dependence and illustrate the implied spatial variation and regional disparities in WTP for all the rural landscape improvements investigated.

Exploring figures of merit associated with the suboptimum operation of class-E power amplifiers

Closed-form design equations for the operation of a class-E amplifier for zero switch voltage slope and arbitrary duty cycle are derived. This approach allows an additional degree of freedom in the design of class-E amplifiers which are normally designed for 50 duty ratio. The analysis developed permits the selection of non-unique solutions where amplifier efficiency is theoretically 100 but power output capability is less than that the 50 duty ratio case would permit. To facilitate comparison between 50 (optimal) and non-50 (suboptimal) duty ratio cases, each important amplifier parameter is normalised to its corresponding optimum operation value. It is shown that by choosing a non-50 suboptimal solution, the operating frequency of a class-E amplifier can be extended. In addition, it is shown that by operating the amplifier in the suboptimal regime, other amplifier parameters, for example, transistor output capacitance or peak switch voltage, can be included along with the standard specification criteria of output power, DC supply voltage and operating frequency as additional input design specifications. Suboptimum class-E operation may have potential advantages for monolithic microwave integrated circuit realisation as lower inductance values (lower series resistance, higher self-resonance frequency, less area) may be required when compared with the results obtained for optimal class-E amplifier synthesis. The theoretical analysis conducted here was verified by harmonic balance simulation, with excellent agreement between both methods. © The Institution of Engineering and Technology 2007.

Performance projections and design optimization of planar double gate SOI MOSFETs for logic technology applications

In this paper, by investigating the influence of source/drain extension region engineering (also known as gate-source/drain underlap) in nanoscale planar double gate (DG) SOI MOSFETs, we offer new insights into the design of future nanoscale gate-underlap DG devices to achieve ITRS projections for high performance (HP), low standby power (LSTP) and low operating power (LOP) logic technologies. The impact of high-kappa gate dielectric, silicon film thickness, together with parameters associated with the lateral source/drain doping profile, is investigated in detail. The results show that spacer width along with lateral straggle can not only effectively control short-channel effects, thus presenting low off-current in a gate underlap device, but can also be optimized to achieve lower intrinsic delay and higher on-off current ratio (I-on/I-off). Based on the investigation of on-current (I-on), off-current (I-off), I-on/I-off, intrinsic delay (tau), energy delay product and static power dissipation, we present design guidelines to select key device parameters to achieve ITRS projections. Using nominal gate lengths for different technologies, as recommended from ITRS specification, optimally designed gate-underlap DG MOSFETs with a spacer-to-straggle (s/sigma) ratio of 2.3 for HP/LOP and 3.2 for LSTP logic technologies will meet ITRS projection. However, a relatively narrow range of lateral straggle lying between 7 to 8 nm is recommended. A sensitivity analysis of intrinsic delay, on-current and off-current to important parameters allows a comparative analysis of the various design options and shows that gate workfunction appears to be the most crucial parameter in the design of DG devices for all three technologies. The impact of back gate misalignment on I-on, I-off and tau is also investigated for optimized underlap devices.

Power combining techniques into unbalanced loads for Class-E and inverse Class-E amplifiers

A power combining strategy for Class-E and inverse Class-E amplifiers operating at high frequencies such that they can operate into unbalanced loads is proposed. This power combining method is particularly important for the inverse Class-E amplifier configuration whose single-stage topology is naturally limited for small-to-medium power applications. Design examples for the power combining synthesis of classical Class-E and then inverse Class-E amplifiers with specification 3 V-1.5 W-2.5 GHz are given. For this specification, it is shown that a three-branch combiner has a natural 50 V output impedance. The resulting circuits are simulated within Agilent Advanced Design Systems environment with good agreement to theoretical prediction. Further the performance of the proposed circuits when operated in a Linear amplification using Nonlinear Components transmitter configuration whereby two-branch amplifiers are driven with constant amplitude conjugate input phase signals is investigated.