Myynnin raportoinnin kehittäminen kassajärjestelmähankkeen yhteydessä

Raportointi liittyy kiinteänä osana yrityksen jokapäiväiseen toimintaan. Raportoinnin sisältö ja muoto vaihtelevat organisaatiotasosta riippuen päivittäisen toiminnan tarkkailusta kuukausittaiseen tulosraportointiin. Raportointi voidaan toteuttaa operatiivisten järjestelmien kautta tai nykyisin entistä suositumpana vaihtoehtona on keskitetty raportointi. Uuden raportointijärjestelmän hankintaprojekti on usein koko yritystä koskeva investointi. Jos raportointijärjestelmällä on tarkoitus raportoida sekä operatiivista toimintaa että johdon tarpeita, on sen mukauduttava moneen tarkoitukseen. Aluksi on tärkeää määritellä tietotarpeet ja tavoitteet projektille unohtamatta riskien- ja projektinhallintaa sekä investointilaskelmia. Jos raportoidaan myös yrityksen ulkopuolelle, tulee ottaa huomioon mahdolliset säädökset sekä tietoturvallisuusnäkökulmat. Myös yrityksen toimintatapoja ja – prosesseja on syytä tarkastella kriittisesti ennen järjestelmähankintaa jolloin voidaan havaita uusia raportointikohteita, tai toimintatapoja voidaan uudelleen organisoida parhaan toimintatavan saavuttamiseksi. Raportointijärjestelmää hankittaessa turvaudutaan usein ulkopuoliseen ohjelmistotoimittajaan, joka integroi ja räätälöi järjestelmän yrityksen omiin tarpeisiin soveltuvaksi. Raportointijärjestelmän hankintaprojekti ei lopu käyttöönottoon vaan projektin alussa on huomioitava myös järjestelmän huomattavasti pisin elinkaari eli käyttö ja ylläpito. Raportointi-, kuten ei moni muukaan tietojärjestelmä, ole ikinä valmis sillä tarpeet ja toimintatavat muuttuvat ajan kuluessa ja käyttäjien tietoisuus lisääntyy.

A System-Level Simulation Model for a Protocol Processor

As the development of integrated circuit technology continues to follow Moore’s law the complexity of circuits increases exponentially. Traditional hardware description languages such as VHDL and Verilog are no longer powerful enough to cope with this level of complexity and do not provide facilities for hardware/software codesign. Languages such as SystemC are intended to solve these problems by combining the powerful expression of high level programming languages and hardware oriented facilities of hardware description languages. To fully replace older languages in the desing flow of digital systems SystemC should also be synthesizable. The devices required by modern high speed networks often share the same tight constraints for e.g. size, power consumption and price with embedded systems but have also very demanding real time and quality of service requirements that are difficult to satisfy with general purpose processors. Dedicated hardware blocks of an application specific instruction set processor are one way to combine fast processing speed, energy efficiency, flexibility and relatively low time-to-market. Common features can be identified in the network processing domain making it possible to develop specialized but configurable processor architectures. One such architecture is the TACO which is based on transport triggered architecture. The architecture offers a high degree of parallelism and modularity and greatly simplified instruction decoding. For this M.Sc.(Tech) thesis, a simulation environment for the TACO architecture was developed with SystemC 2.2 using an old version written with SystemC 1.0 as a starting point. The environment enables rapid design space exploration by providing facilities for hw/sw codesign and simulation and an extendable library of automatically configured reusable hardware blocks. Other topics that are covered are the differences between SystemC 1.0 and 2.2 from the viewpoint of hardware modeling, and compilation of a SystemC model into synthesizable VHDL with Celoxica Agility SystemC Compiler. A simulation model for a processor for TCP/IP packet validation was designed and tested as a test case for the environment.

MRI/TRUS fusion software-based targeted biopsy: the new standard of care?

The advent of multiparametric MRI has made it possible to change the way in which prostate biopsy is done, allowing to direct biopsies to suspicious lesions rather than randomly. The subject of this review relates to a computer-assisted strategy, the MRI/US fusion software-based targeted biopsy, and to its performance compared to the other sampling methods. Different devices with different methods to register MR images to live TRUS are currently in use to allow software-based targeted biopsy. Main clinical indications of MRI/US fusion software-based targeted biopsy are re-biopsy in men with persistent suspicious of prostate cancer after first negative standard biopsy and the follow-up of patients under active surveillance. Some studies have compared MRI/US fusion software-based targeted versus standard biopsy. In men at risk with MRI-suspicious lesion, targeted biopsy consistently detects more men with clinically significant disease as compared to standard biopsy; some studies have also shown decreased detection of insignificant disease. Only two studies directly compared MRI/US fusion software-based targeted biopsy with MRI/US fusion visual targeted biopsy, and the diagnostic ability seems to be in favor of the software approach. To date, no study comparing software-based targeted biopsy against in-bore MRI biopsy is available. The new software-based targeted approach seems to have the characteristics to be added in the standard pathway for achieving accurate risk stratification. Once reproducibility and cost-effectiveness will be verified, the actual issue will be to determine whether MRI/TRUS fusion software-based targeted biopsy represents anadd-on test or a replacement to standard TRUS biopsy.

WWW-pohjaisen sovelluksen automatisoitu testaus ja sitä edistävät ohjelmointikäytännöt

Ohjelmistotestauksen avulla voidaan tarkastella sovelluksen vastaavuutta vaatimuksiin. Tavoitteena on löytää sovelluksesta virheitä, ja siten parantaa sovelluksen laatua. Sovelluksen laatu voidaan määritellä useilla mittareilla, kuten esimerkiksi testattavuudella. Tässä työssä tarkastellaan WWW-sovelluksen automatisoidun testauksen toteutusta, jossa käytetään apuna testauskehystä. Automatisoituun testaukseen kuuluu testitapausten suunnittelu sekä toteutus, joiden lopputuloksena on uudelleenajettavia testitapauksia. Testaus keskittyy sovelluksen toiminnallisuuteen ja jättää tietokantaan päivitettävien tietojen tarkastamisen tekemättä. Testaus suoritetaan ilman tarkempaa tietoa sovelluksen sisäisestä toiminnasta. Testattava sovellus on Mobilding-hankkeessa toteutettu WWW-sovellus, jonka avulla hallinnoidaan rakennuksen elementtejä. Työssä vertaillaan WWW-sovelluksen käyttöliittymän testaukseen soveltuvia testauskehyksiä, ja pyritään tuomaan esille niiden ominaispiirteitä. Työn tuloksena on uudelleensuoritettavia testitapahtumia. Lisäksi pohditaan ohjelmointikäytäntöjä, joilla voidaan edistää automatisoitua testausta. Ohjelmointikäytännöt perustuvat työn toteutuksen aikana havaittuihin ongelmiin.

Implementing Agile Software Development Methods in a Small Organization

Currently there is a vogue for Agile Software Development methods and many software development organizations have already implemented or they are planning to implement agile methods. Objective of this thesis is to define how agile software development methods are implemented in a small organization. Agile methods covered in this thesis are Scrum and XP. From both methods the key practices are analysed and compared to waterfall method. This thesis also defines implementation strategy and actions how agile methods are implemented in a small organization. In practice organization must prepare well and all needed meters are defined before the implementation starts. In this work three different sample projects are introduced where agile methods were implemented. Experiences from these projects were encouraging although sample set of projects were too small to get trustworthy results.

Software para análise quantitativa da deglutição

OBJETIVO: Apresentar um software que permita uma análise detalhada da dinâmica da deglutição. MATERIAIS E MÉTODOS: Participaram deste estudo dez indivíduos após acidente vascular encefálico, sendo seis do gênero masculino, com idade média de 57,6 anos. Foi realizada videofluoroscopia da deglutição e as imagens foram digitalizadas em microcomputador, com posterior análise do tempo do trânsito faríngeo da deglutição, por meio de um cronômetro e do software. RESULTADOS: O tempo médio do trânsito faríngeo da deglutição apresentou-se diferente quando comparados os métodos utilizados (cronômetro e software). CONCLUSÃO: Este software é um instrumento de análise dos parâmetros tempo e velocidade da deglutição, propiciando melhor compreensão da dinâmica da deglutição, com reflexos tanto na abordagem clínica dos pacientes com disfagia como para fins de pesquisa científica.

QualIM®: software para treinamento na interpretação de imagens médicas digitais

OBJETIVO: Foi desenvolvido um software denominado QualIM® - Qualificação de Imagens Médicas para treinamento de profissionais na interpretação de exames digitais de mamografias utilizando ferramentas de manipulação de imagens, em monitores específicos, classificadas em BI-RADS®. MATERIAIS E MÉTODOS: O sistema, desenvolvido em Delphi 7, armazena as respostas da interpretação de imagens mamográficas durante o treinamento e compara aos dados inseridos denominados "padrão-ouro". O sistema contém imagens de computed radiography, direct radiography e digitalizadas. O software converte as imagens do computed radiography e direct radiography para o formato TIFF, mantendo as resoluções espacial e de contraste originais. Profissionais em treinamento manipulam o realce da imagem utilizando ferramentas de software (zoom, inversão, réguas digitais, outras). Dependendo da complexidade, são apresentadas até oito incidências mamográficas, seis imagens de ultra-som e duas de anatomopatológico. RESULTADOS: O treinamento iniciou em 2007 e atualmente faz parte do programa de residência em radiologia. O software compõe o texto, de forma automática, das informações inseridas pelo profissional, baseado nas categorias BI-RADS, e compara com a base de dados. CONCLUSÃO: O software QualIM é uma ferramenta digital de ensino que auxilia profissionais no reconhecimento de padrões visuais de uma imagem mamográfica, bem como na interpretação de exames mamográficos, utilizando a classificação BI-RADS.

Uso de software como ferramenta pedagógica no processo de ensino-aprendizagem da mamografia digital

OBJETIVO: Avaliar o impacto sobre o treinamento de residentes utilizando uma ferramenta computacional dedicada à avaliação do desempenho da leitura de imagens radiológicas convencionais e digitais. MATERIAIS E MÉTODOS: O treinamento foi realizado no Laboratório de Qualificação de Imagens Médicas (QualIM). Os residentes de radiologia efetuaram cerca de 1.000 leituras de um total de 60 imagens obtidas de um simulador estatístico (Alvim®) que apresenta fibras e microcalcificações de dimensões variadas. O desempenho dos residentes na detecção dessas estruturas foi avaliado por meio de parâmetros estatísticos. RESULTADOS: Os resultados da probabilidade de detectabilidade foram de 0,789 e 0,818 para os sistemas convencional e digital, respectivamente. As taxas de falso-positivos foram de 8% e 6% e os valores de verdadeiro-positivos, de 66% e 70%, respectivamente. O valor de kappa total foi 0,553 para as leituras em negatoscópio e 0,615 em monitor. A área sob a curva ROC foi de 0,716 para leitura em filme e 0,810 para monitor. CONCLUSÃO: O treinamento proposto mostrou ser efetivo e apresentou impacto positivo sobre o desempenho dos residentes, constituindo-se em interessante ferramenta pedagógica. Os resultados sugerem que o método de treinamento baseado na leitura de simuladores pode produzir um melhor desempenho dos profissionais na interpretação das imagens mamográficas.

Assessment of embryo/fetus during pregnancy by threedimensional ultrasonography using the HD live software: iconographic essay

Fetal development is studied since the advent of two-dimensional ultrasonography. However, a detailed assessment of structures and surfaces improved with three-dimensional ultrasonography. Currently, it is possible to identify embryonic components and fetal parts with greater detail, at all pregnancy trimesters, using the HD live software, where the images gain realistic features by means of appropriate control of lighting and shadowing effects. In the present study, the authors utilized this resource to follow-up, by means of images, the development of a normal pregnancy along all trimesters.

Using computational fluid dynamics to predict head losses in the auxiliary elements of a microirrigation sand filter

It is often assumed that total head losses in a sand filter are solely due to the filtration media and that there are analytical solutions, such as the Ergun equation, to compute them. However, total head losses are also due to auxiliary elements (inlet and outlet pipes and filter nozzles), which produce undesirable head losses because they increase energy requirements without contributing to the filtration process. In this study, ANSYS Fluent version 6.3, a commercial computational fluid dynamics (CFD) software program, was used to compute head losses in different parts of a sand filter. Six different numerical filter models of varying complexities were used to understand the hydraulic behavior of the several filter elements and their importance in total head losses. The simulation results show that 84.6% of these were caused by the sand bed and 15.4% were due to auxiliary elements (4.4% in the outlet and inlet pipes, and 11.0% in the perforated plate and nozzles). Simulation results with different models show the important role of the nozzles in the hydraulic behavior of the sand filter. The relationship between the passing area through the nozzles and the passing area through the perforated plate is an important design parameter for the reduction of total head losses. A reduced relationship caused by nozzle clogging would disproportionately increase the total head losses in the sand filter

From Regional Landslide Detection to Site-Specific Slope Deformation Monitoring and Modelling Based on Active Remote Sensors

Landslide processes can have direct and indirect consequences affecting human lives and activities. In order to improve landslide risk management procedures, this PhD thesis aims to investigate capabilities of active LiDAR and RaDAR sensors for landslides detection and characterization at regional scales, spatial risk assessment over large areas and slope instabilities monitoring and modelling at site-specific scales. At regional scales, we first demonstrated recent boat-based mobile LiDAR capabilities to model topography of the Normand coastal cliffs. By comparing annual acquisitions, we validated as well our approach to detect surface changes and thus map rock collapses, landslides and toe erosions affecting the shoreline at a county scale. Then, we applied a spaceborne InSAR approach to detect large slope instabilities in Argentina. Based on both phase and amplitude RaDAR signals, we extracted decisive information to detect, characterize and monitor two unknown extremely slow landslides, and to quantify water level variations of an involved close dam reservoir. Finally, advanced investigations on fragmental rockfall risk assessment were conducted along roads of the Val de Bagnes, by improving approaches of the Slope Angle Distribution and the FlowR software. Therefore, both rock-mass-failure susceptibilities and relative frequencies of block propagations were assessed and rockfall hazard and risk maps could be established at the valley scale. At slope-specific scales, in the Swiss Alps, we first integrated ground-based InSAR and terrestrial LiDAR acquisitions to map, monitor and model the Perraire rock slope deformation. By interpreting both methods individually and originally integrated as well, we therefore delimited the rockslide borders, computed volumes and highlighted non-uniform translational displacements along a wedge failure surface. Finally, we studied specific requirements and practical issues experimented on early warning systems of some of the most studied landslides worldwide. As a result, we highlighted valuable key recommendations to design new reliable systems; in addition, we also underlined conceptual issues that must be solved to improve current procedures. To sum up, the diversity of experimented situations brought an extensive experience that revealed the potential and limitations of both methods and highlighted as well the necessity of their complementary and integrated uses.

Learning 2.0 : concepts and experiences with social networks and software

Peer-reviewed

Combining Generic Programming and Service-Oriented Architectures for the Effective and Timely Development of Complex e-Learning Systems

Peer-reviewed