Determinação preliminar de parâmetros construtivos de barreiras reactivas permeáveis com recurso a colunas para remediação de crómio com ferro zerovalente

Um dos principais problemas com que se deparam as sociedades actuais, e que é consequência da sua forma de se organizar prende-se com a mudança das características originais dos locais onde habitam e dos seus componentes como resultado das actividades humanas que transformam solos e águas em depósitos de resíduos. Entre as substâncias que são depositadas no meio físico, que requerem especial atenção, encontra-se o grupo dos metais pesados, uma vez que são considerados como perigosos pela sua toxicidade e potencial cancerígeno quando em contacto com populações ou ecossistemas. Destes metais, o crómio é um dos metais que requer especial atenção devido a sua relativa abundância como contaminante, e à periculosidade dos seus iões, em especial o Cr6+. Este trabalho pretende contribuir para o conhecimento dos fenómenos geoambientais associados à remediação de águas contaminadas com Cr6+ recorrendo ao ferro monovalente de forma a estabelecer parâmetros de aplicabilidade através de estudos laboratoriais baseados em ensaios em colunas.

Metamorfoses identitárias em contexto institucional

Dissertação de Mestrado, Sociologia, 4 de Abril de 2014, Universidade dos Açores.

Construção de um robô trepador com locomoção através de rodas e adesão através de meios magnéticos

Mestrado em Engenharia Electrotécnica e de Computadores

Estudo da obtenção de gelatina a partir de raspa Wet-Blue da indústria de curtumes

Mestrado em Engenharia Química. Ramo Tecnologias de Protecção Ambiental.

Metal deposition using Ionic liquids

There is an interest to create zinc/tin alloys to replace cadmium as a corrosion protective coating material. Existing aqueous electroplating systems for these alloys are commercially available but have several limitations. Dangerous and highly toxic complexing agents are uses e.g. cyanides. To overcome these problems, ionic liquids could provide a solution to obtain an alloy containing 20 to 30% of zinc. Ionic liquids (IL’s) often have wider electrochemical windows which allow the deposition of e.g. refractive metals that can not be deposited from aqueous solutions. In IL’s it is often not necessary to add complexing agents. The Zn/Sn alloy deposition from IL’s is therefore a promising application for the plating industry. Nevertheless, there are some issues with this alternative for aqueous systems. The degradation of the organic components, the control of the concentration of two metals and the risk of a two phase deposition instead of an alloy had to be overcome first. It is the main purpose of this thesis to obtain a Zn/Sn alloy with 20% zinc using IL’s as an electrolyte. First a separate study was performed on both the zinc and the tin deposition. Afterwards, an attempt to deposit a Zn/Sn alloy was made. An introduction to a study about the electrodeposition of refractive metals concludes this work. It initiated the research for oxygen-free IL’s to deposit molybdenum or tungsten. Several parameters (temperature, metal source and concentration, organic complexing agents,…) were optimized for both the zinc, tin and zinc/tin deposition. Experiments were performed both in a parallel plate cell and a Hull cell, so as to investigate the effect of current density as well. Ethaline200 was selected as electrolyte. As substrate, brass and iron were selected, while as anode a plate of the metal to deposit was chosen, tin for the alloy. The best efficiencies were always obtained on brass; however the iron substrate resulted in the best depositions. A concentration of 0.27M ZnCl2, 0.07M SnCl2 with 0.015M of K3-HEDTA as complexant resulted in a deposition containing the desired alloy with the amount of 20% zinc and 80% tin with good appearance. Refractory metals as molybdenum and tungsten cannot be electrodeposited from aqueous solutions without forming a co-deposition with Ni, Co or Fe. Here, IL’s could again provide a solution. A first requirement is the dissolution of a metal source. MoO3 could be suitable, however there are doubts about using oxides. Oxygen-free IL’s were sought for. A first attempt was the combination of ZnCl2 with chlormequat (CCC), which gave liquids below 150°C in molar ratios of 2 : 1 and 3 : 1. Unfortuna tely, MoO3 didn’t dissolve in these IL’s. Another route to design oxygen-free IL’s was the synthesis of quaternary ammonium salts. None of the methods used, proved viable as reaction time was long and resulted in very low yields. Therefore, no sufficient quantities were obtained to perform the possible electrochemical behavior of refractive metals.

Contribuição para a caracterização da emissão de nanopartículas em processos de soldadura e avaliação de riscos decorrentes do processo

Trabalho Final de Mestrado para obtenção do grau de Mestre em Engenharia Química e Biológica Ramo de processos químicos

Avaliação e substituição de produtos químicos no sector BOF da Swedwood Portugal

A crescente preocupação com aspectos ambientais tornou-se uma questão incontornável para as empresas. Assim, a legislação aplicável obriga a maior controlo de qualquer tipo de perigo que ponha em causa a saúde humana ou o ambiente. Deste modo, a Swedwood Portugal é obrigada a implementar algumas medidas de controlo dos produtos químicos. Assim, os objectivos deste estágio curricular fundamentamse em identificar, avaliar e substituir ou minimizar os impactos dos produtos químicos (PQ’s) que, de acordo com especificações REACH (Regulamento da Comissão Europeia, relativo a Registo, Avaliação, Autorização e restrição de substâncias Químicas) e da Swedwood Internacional não podem ser utilizados. Como tal, o trabalho descrito nesta dissertação foi dividido em várias etapas. A primeira etapa consistiu em identificar todos os PQ’s utilizados no sector Board On Frame (BOF) da Swedwood Portugal. Feito este inventário, foi então criada uma base de dados em formato Microsoft Office Access que permitiu compilar a informação mais relevante dos PQ’s, para uma consulta mais simples e expedita, substituindo a já existente e desactualizada base de dados de PQ’s em formato Microsoft Office Excel. No total foram inventariados 243 PQ’s. Contudo, não foi possível obter as Fichas de Segurança de todos e, por isso, apenas 185 foram registados na base de dados. Estes 185 PQ’s existentes no sector BOF da Swedwood Portugal, foram submetidos a uma avaliação das substâncias que os compõem de acordo com uma ferramenta informática criada pela Swedwood Internacional – Substitution Evaluation Key (SEK). Esta ferramenta usa três listas europeias de substâncias químicas que permitem a avaliação de produtos químicos indirectos: Substances of Very High Concern (SVHC) da Agência Europeia de Produtos Químicos (ECHA), Substitute It Now (SIN) da ChemSec (Organização sueca dedicada ao ambiente) e PRIO da Agência Sueca de Produtos Químicos (Kemi). As três listas incluem substâncias de carácter de tal forma perigoso que a sua utilização deve ser restringida ou até eliminada. Logo, os PQ’s indirectos que contenham substâncias presentes em, pelo menos, uma destas listas devem ser imediatamente substituídos por outros cuja avaliação seja positiva. Por outro lado, para produtos químicos directos, as restrições encontram-se numa especificação imposta pela IKEA, IOS-MAT-0066. Concluída a avaliação, foi então necessário encontrar alternativas viáveis aos PQ’s avaliados negativamente. Como tal, a primeira abordagem consistiu em contactar os fabricantes dos PQ’s a substituir de modo a que estes pudessem apresentar as suas próprias alternativas. Caso estes não apresentassem alternativas viáveis, então contactarse- iam novos fornecedores. Dos 185 PQ’s registados na base de dados e avaliados, 30 produtos químicos indirectos existentes nas fábricas não obedeciam aos critérios impostos pela SEK, estando os produtos químicos directos todos de acordo com as imposições da IOS-MAT-0066. Os 30 PQ’s indirectos do Sector BOF da Swedwood Portugal que incluem as substâncias químicas com carácter perigoso apresentam características Cancerígenas, Mutagénicas e tóxicas para a Reprodução (CMR), irritantes e/ou sensibilizantes e perigosas, a longo prazo, para o ambiente. Para estes PQ’s foram apresentadas alternativas viáveis no que concerne a impactos para a saúde ou para o ambiente e os respectivos custos associados (admitindo quantidades mínimas vendidas). Contudo, não foi possível em tempo útil testar estas alternativas no funcionamento da empresa de modo a avaliar a sua eficiência técnica.

Soluções de transporte ferroviário: simulação de marcha e de tráfego de veículos de tração diesel e elétrica

Trabalho Final de Mestrado para obtenção do grau de Mestre em Engenharia Mecânica

Análise da sinistralidade rodoviária no concelho de Loures em meio interurbano

Dissertação para obtenção do grau de Mestre em Engenharia na Área de Especialização em Vias de Comunicação e Transporte

Futuros sobre a margem operacional da refinação do petróleo bruto: crack spreads

Mestrado em Contabilidade Internacional

Sinistralidade laboral no setor da indústria extrativa no triângulo do mármore

Mestrado em Segurança e Higiene no Trabalho

Fisheries Safety Management

Fisheries is one of the most dangerous professions in the world. Fatal accidents and injuries in the fisheries are characterized as well as particular circumstances that may cause or aggravate the risk of accidents. Aspects of safety management of fishing vessels are covered in this paper: areas of concern when doing a risk assessment in fishing vessels, fundamental elements on a safety management system for the fisheries and the need for international and national level instruments as well as legal and compulsory measures

HIV risk practices by female sex workers according to workplace

OBJECTIVE To investigate differences in HIV infection- related risk practices by Female Sex Workers according to workplace and the effects of homophily on estimating HIV prevalence. METHODS Data from 2,523 women, recruited using Respondent-Driven Sampling, were used for the study carried out in 10 Brazilian cities in 2008-2009. The study included female sex workers aged 18 and over. The questionnaire was completed by the subjects and included questions on characteristics of professional activity, sexual practices, use of drugs, HIV testing, and access to health services. HIV quick tests were conducted. The participants were classified in two groups according to place of work: on the street or indoor venues, like nightclubs and saunas. To compare variable distributions by place of work, we used Chi-square homogeneity tests, taking into consideration unequal selection probabilities as well as the structure of dependence between observations. We tested the effect of homophily by workplace on estimated HIV prevalence. RESULTS The highest HIV risk practices were associated with: working on the streets, lower socioeconomic status, low regular smear test coverage, higher levels of crack use and higher levels of syphilis serological scars as well as higher prevalence of HIV infection. The effect of homophily was higher among sex workers in indoor venues. However, it did not affect the estimated prevalence of HIV, even after using a post-stratification by workplace procedure. CONCLUSIONS The findings suggest that strategies should focus on extending access to, and utilization of, health services. Prevention policies should be specifically aimed at street workers. Regarding the application of Respondent-Driven Sampling, the sample should be sufficient to estimate transition probabilities, as the network develops more quickly among sex workers in indoor venues.

Aspectos a considerar para a avaliação de riscos no caso da aplicação do óleo descofrante

Mestrado em Higiene e Segurança no Trabalho.

A survey of technologies and applications for climbing robots locomotion and adhesion

The interest in the development of climbing robots has grown rapidly in the last years. Climbing robots are useful devices that can be adopted in a variety of applications, such as maintenance and inspection in the process and construction industries. These systems are mainly adopted in places where direct access by a human operator is very expensive, because of the need for scaffolding, or very dangerous, due to the presence of an hostile environment. The main motivations are to increase the operation efficiency, by eliminating the costly assembly of scaffolding, or to protect human health and safety in hazardous tasks. Several climbing robots have already been developed, and other are under development, for applications ranging from cleaning to inspection of difficult to reach constructions. A wall climbing robot should not only be light, but also have large payload, so that it may reduce excessive adhesion forces and carry instrumentations during navigation. These machines should be capable of travelling over different types of surfaces, with different inclinations, such as floors, walls, or ceilings, and to walk between such surfaces (Elliot et al. (2006); Sattar et al. (2002)). Furthermore, they should be able of adapting and reconfiguring for various environment conditions and to be self-contained. Up to now, considerable research was devoted to these machines and various types of experimental models were already proposed (according to Chen et al. (2006), over 200 prototypes aimed at such applications had been developed in the world by the year 2006). However, we have to notice that the application of climbing robots is still limited. Apart from a couple successful industrialized products, most are only prototypes and few of them can be found in common use due to unsatisfactory performance in on-site tests (regarding aspects such as their speed, cost and reliability). Chen et al. (2006) present the main design problems affecting the system performance of climbing robots and also suggest solutions to these problems. The major two issues in the design of wall climbing robots are their locomotion and adhesion methods. With respect to the locomotion type, four types are often considered: the crawler, the wheeled, the legged and the propulsion robots. Although the crawler type is able to move relatively faster, it is not adequate to be applied in rough environments. On the other hand, the legged type easily copes with obstacles found in the environment, whereas generally its speed is lower and requires complex control systems. Regarding the adhesion to the surface, the robots should be able to produce a secure gripping force using a light-weight mechanism. The adhesion method is generally classified into four groups: suction force, magnetic, gripping to the surface and thrust force type. Nevertheless, recently new methods for assuring the adhesion, based in biological findings, were proposed. The vacuum type principle is light and easy to control though it presents the problem of supplying compressed air. An alternative, with costs in terms of weight, is the adoption of a vacuum pump. The magnetic type principle implies heavy actuators and is used only for ferromagnetic surfaces. The thrust force type robots make use of the forces developed by thrusters to adhere to the surfaces, but are used in very restricted and specific applications. Bearing these facts in mind, this chapter presents a survey of different applications and technologies adopted for the implementation of climbing robots locomotion and adhesion to surfaces, focusing on the new technologies that are recently being developed to fulfill these objectives. The chapter is organized as follows. Section two presents several applications of climbing robots. Sections three and four present the main locomotion principles, and the main "conventional" technologies for adhering to surfaces, respectively. Section five describes recent biological inspired technologies for robot adhesion to surfaces. Section six introduces several new architectures for climbing robots. Finally, section seven outlines the main conclusions.