Abi mutants in Dictyostelium reveal specific roles for the SCAR/WAVE complex in cytokinesis.

Actin polymerization drives multiple cell processes involving movement and shape change. SCAR/WAVE proteins connect signaling to actin polymerization through the activation of the Arp2/3 complex. SCAR/WAVE is normally found in a complex with four other proteins: PIR121, Nap1, Abi2,and HSPC300 (Figure S1A available online) [1-3]. However,there is no consensus as to whether the complex functions as an unchanging unit or if it alters its composition in response to stimulation, as originally proposed by Edenet al. [1]. It also is unclear whether complex members exclusively regulate SCAR/WAVEs or if they have additional targets [4-6]. Here, we analyze the roles of the unique Dictyostelium Abi. We find that abiA null mutants show less severe defects in motility than do scar null cells, indicating--unexpectedly--that SCAR retains partial activity in the absence of Abi. Furthermore, abiA null mutants have a serious defect in cytokinesis, which is not seen in other SCAR complex mutants and is seen only when SCAR itself is present. Detailed examination reveals that normal cytokinesis requires SCAR activity, apparently regulated through multiple pathways.

Impact of a Fram Strait cyclone on ice edge, drift, divergence, and concentration: Possibilities and limits of an observational analysis

This study aims at the determination of a Fram Strait cyclone track and of the cyclone’s impact on ice edge, drift, divergence, and concentration. A 24 h period on 13–14 March 2002 framed by two RADARSAT images is analyzed. Data are included from autonomous ice buoys, a research vessel, Special Sensor Microwave Imager (SSM/I) and QuikSCAT satellite, and the operational European Centre for Medium-Range Weather Forecasts (ECMWF) model. During this 24 h period the cyclone moved northward along the western ice edge in the Fram Strait, crossed the northern ice edge, made a left-turn loop with 150 km diameter over the sea ice, and returned to the northern ice edge. The ECMWF analysis places the cyclone track 100 km too far west over the sea ice, a deviation which is too large for representative sea ice simulations. On the east side of the northward moving cyclone, the ice edge was pushed northward by 55 km because of strong winds. On the rear side, the ice edge advanced toward the open water but by a smaller distance because of weaker winds there. The ice drift pattern as calculated from the ice buoys and the two RADARSAT images is cyclonically curved around the center of the cyclone loop. Ice drift divergence shows a spatial pattern with divergence in the loop center and a zone of convergence around. Ice concentration changes as retrieved from SSM/I data follow the divergence pattern such that sea ice concentration increased in areas of divergence and decreased in areas of convergence.

e-Leadership through strategic alignment: an empirical study of small and medium sized enterprises in the digital age

Small and medium sized enterprises (SMEs) play an important role in the European economy. A critical challenge faced by SME leaders, as a consequence of the continuing digital technology revolution, is how to optimally align business strategy with digital technology to fully leverage the potential offered by these technologies in pursuit of longevity and growth. There is a paucity of empirical research examining how e-leadership in SMEs drives successful alignment between business strategy and digital technology fostering longevity and growth. To address this gap, in this paper we develop an empirically derived e-leadership model. Initially we develop a theoretical model of e-leadership drawing on strategic alignment theory. This provides a theoretical foundation on how SMEs can harness digital technology in support of their business strategy enabling sustainable growth. An in-depth empirical study was undertaken interviewing 42 successful European SME leaders to validate, advance and substantiate our theoretically driven model. The outcome of the two stage process – inductive development of a theoretically driven e-leadership model and deductive advancement to develop a complete model through in-depth interviews with successful European SME leaders – is an e-leadership model with specific constructs fostering effective strategic alignment. The resulting diagnostic model enables SME decision makers to exercise effective e-leadership by creating productive alignment between business strategy and digital technology improving longevity and growth prospects.

Convergence accommodation in orthoptic practice

Aims. Orthoptists are familiar with AC/A ratios and the concept that accommodation drives convergence, but the reverse relationship, that of the accommodation associated with convergence, is rarely considered. Methods. This article reviews published evidence from our laboratory which has investigated the drives to both vergence and accommodation. All studies involved a method by which accommodation and vergence were measured concurrently and objectively to a range of visual stimuli which manipulate blur, disparity and proximal/looming cues in different combinations. Results Results are summarised for both typical and atypical participants, and over development between birth and adulthood. Conclusions For the majority of typical children and adults, as well as patients with most heterophorias and intermittent exotropia, disparity is the main cue to both vergence and accommodation. Thus the convergence→accommodation relationship is more influential than that of accommodative vergence. Differences in “style” of near cue use may be a more useful way to think about responses to stimuli moving in depth, and their consequences for orthoptic patients, than either AC/A or CA/C ratios. The implications of a strong role for vergence accommodation in orthoptic practice are considered.

An event of stratospheric air intrusion and its associated secondary surface cyclogenesis over the South Atlantic Ocean

This work presents an analysis of a lowermost stratospheric air intrusion event over the coast of Brazil, which may have been responsible for a secondary surface cyclogenesis over the southwestern Atlantic Ocean. The surface cyclone initiated at 0600 UTC 17 April 1999 in a cold air mass in the rear of a cold front after a primary cyclone developed over the same region. The analysis of the secondary cyclone revealed the presence of lowermost stratospheric air intrusion characterized by anomalous potential vorticity (PV), dry air, and high concentration of ozone in atmospheric column. The system developed on the eastern side of an upper level core of PV anomaly, which induced a cyclonic wind circulation at lower levels and favored the onset of the secondary cyclone. In midlevels (500 hPa), the cutoff low development contributed to reduce the propagation speed of the wave pattern. This feature seemed to (1) allow the low-level cold/dry air to heat/moisten associated with sensible and latent fluxes transferred from the ocean to the atmosphere, which intensified a baroclinic zone parallel to the coast, and (2) contribute to the long duration of the system. The present analysis indicates that this secondary cyclone development could be the result of the coupling between the PV anomaly in the upper levels and low-level air-sea interaction.

The RAINY3D Code: The Treatment of Condensation in Nova Remnants during Nebular Phase

Classical nova remnants are important scenarios for improving the photoionization modeling. This work describes the pseudo-three-dimensional code RAINY3D, which drives the photoionization code Cloudy as a subroutine. Photoionization simulations of old nova remnants are also presented and discussed. In these simulations we analyze the effect of condensation in the remnant spectra. The condensed mass fraction affects the Balmer lines by a factor of greater than 4 when compared with homogeneous models, and this directly impacts the shell mass determination. The He II 4686/H beta ratio decreases by a factor of 10 in clumpy shells. These lines are also affected by the clump size and density distributions. The behavior of the strongest nebular line observed in nova remnants is also analyzed for heterogeneous shells. The gas diagnoses in novae ejecta are thought to be more accurate during the nebular phase, but we have determined that at this phase the matter distribution can strongly affect the derived shell physical properties and chemical abundances.

EXPLOITING A GENERIC APPROACH TO CONSTRUCT COMPONENT-BASED SYSTEMS SOFTWARE IN LINUX ENVIRONMENTS

Component-based software engineering has recently emerged as a promising solution to the development of system-level software. Unfortunately, current approaches are limited to specific platforms and domains. This lack of generality is particularly problematic as it prevents knowledge sharing and generally drives development costs up. In the past, we have developed a generic approach to component-based software engineering for system-level software called OpenCom. In this paper, we present OpenComL an instantiation of OpenCom to Linux environments and show how it can be profiled to meet a range of system-level software in Linux environments. For this, we demonstrate its application to constructing a programmable router platform and a middleware for parallel environments.

Glassy states in the stochastic Potts model

We have studied by numerical simulations the relaxation of the stochastic seven-state Potts model after a quench from a high temperature down to a temperature below the first-order transition. For quench temperatures just below the transition temperature the phase ordering occurs by simple coarsening under the action of surface tension. For sufficient low temperatures however the straightening of the interface between domains drives the system toward a metastable disordered state, identified as a glassy state. Escaping from this state occurs, if the quench temperature is nonzero, by a thermal activated dynamics that eventually drives the system toward the equilibrium state. (C) 2009 Elsevier B.V. All rights reserved.

Students Working in Carpentry Shop at the New York Trade School

This black and white photograph shows students at work benches in part of the carpentry workshop at the New York Trade School. Beyond the benches two students can be seen working on framing in the rear of the classroom.

Students at work in the Air Conditioning and Refrigeration Department of the New York Trade School

Students in the Air Conditioning/Refrigeration Dept. of the New York Trade School are shown hard at work in the classroom. Notice the sign at the rear of the room that reads "Watch Out for Pipes on Floor." Black and white photograph.

Open Issues in Control ofAutomotive R744 Air-ConditioningSystems

In this thesis, one of the current control algorithms for the R744 cycle, which tries tooptimize the performance of the system by two SISO control loops, is compared to acost-effective system with just one actuator. The operation of a key component of thissystem, a two stage orifice expansion valve is examined in a range of typical climateconditions. One alternative control loop for this system, which has been proposed byBehr group, is also scrutinized.The simulation results affirm the preference of using two control-loops instead of oneloop, but refute advantages of the Behr alternate control approach against one-loopcontrol. As far as the economic considerations of the A/C unit are concerned, usinga two-stage orifice expansion valve is desired by the automotive industry, thus basedon the experiment results, an improved logic for control of this system is proposed.In the second part, it is investigated whether the one-actuator control approach isapplicable to a system consisting of two parallel evaporators to allow passengers tocontrol different climate zones. The simulation results show that in the case of usinga two-stage orifice valve for the front evaporator and a fixed expansion valve forthe rear one, a proper distribution of the cooling power between the front and rearcompartment is possible for a broad range of climate conditions.

Energy Analysis within Industrial Hydraulics and Correspondent Solar PV System Design

Energy efficiency and renewable energy use are two main priorities leading to industrial sustainability nowadays according to European Steel Technology Platform (ESTP). Modernization efforts can be done by industries to improve energy consumptions of the production lines. These days, steel making industrial applications are energy and emission intensive. It was estimated that over the past years, energy consumption and corresponding CO2 generation has increased steadily reaching approximately 338.15 parts per million in august 2010 [1]. These kinds of facts and statistics have introduced a lot of room for improvement in energy efficiency for industrial applications through modernization and use of renewable energy sources such as solar Photovoltaic Systems (PV).The purpose of this thesis work is to make a preliminary design and simulation of the solar photovoltaic system which would attempt to cover the energy demand of the initial part of the pickling line hydraulic system at the SSAB steel plant. For this purpose, the energy consumptions of this hydraulic system would be studied and evaluated and a general analysis of the hydraulic and control components performance would be done which would yield a proper set of guidelines contributing towards future energy savings. The results of the energy efficiency analysis showed that the initial part of the pickling line hydraulic system worked with a low efficiency of 3.3%. Results of general analysis showed that hydraulic accumulators of 650 liter size should be used by the initial part pickling line system in combination with a one pump delivery of 100 l/min. Based on this, one PV system can deliver energy to an AC motor-pump set covering 17.6% of total energy and another PV system can supply a DC hydraulic pump substituting 26.7% of the demand. The first system used 290 m2 area of the roof and was sized as 40 kWp, the second used 109 m2 and was sized as 15.2 kWp. It was concluded that the reason for the low efficiency was the oversized design of the system. Incremental modernization efforts could help to improve the hydraulic system energy efficiency and make the design of the solar photovoltaic system realistically possible. Two types of PV systems where analyzed in the thesis work. A method was found calculating the load simulation sequence based on the energy efficiency studies to help in the PV system simulations. Hydraulic accumulators integrated into the pickling line worked as energy storage when being charged by the PV system as well.

Forensisk undersökning av Solid State Drive

Solid State Diskar (SSD) är relativt nya och mycket om dem är okänt. Detta examensarbete fokuserar på att läsa forensiskt viktig information från både lagringsutrymmet och reservutrymmet. Detta har försökts genom att ett program har byggts i C++, detta program använder ATA kommandon för att läsa information från disken. Även om programmet aldrig blev färdigt kunde det skicka och ta emot data från en SSD, dock inte reservutrymmet vilket var fokus i detta examensarbete.

Överviktens betydelser

Meanings of overweight In societal discourses overweight is defined as a growing individual and a social problem leading to sickness and disability, mental distress, increased use of health care and reduced economic productivity. A strong normative pressure is directed at the overweight but relatively few succeed in reducing their weight. Therefore, the overweight need to manage a double stigma; the overweight body per se and their inability to conform to norms about bodyweight. This article investigates how individuals present their overweight to their social environment. Empirical data was collected as part of an evaluation study of a keep-fit project directed at home-care staff. Qualitative interviews were conducted with 49 participants and 30 of them had either tried or were trying to reduce their weight. The analysis shows that the informants presented a divided self consisting of a biological body, with its own drives, and a mind that is aware of the body and its social meanings. They portrayed their lives as a battle between these two sides. Their presentations of the divided self can be analysed as a defence of their social selves. The overweight can account for the kilos by blaming the biological drives, which leaves the core of themselves – their minds – unblemished. They can express an intention to loose weight and thereby conform to norms about bodyweight. When they fail to loose weight, the responsibility can be attributed to the unruly body.

De anställdas outnyttjade kreativitet : En fallstudie på Ica DE Borlänge

Syftet med examensarbetet var att med utgångspunkt i ett konkret exempel, beskriva hur företag kan organisera verksamheten för att ta till vara på de anställdas outnyttjade kreativitet. Materialet i examensarbetet kan mycket väl tillämpas och användas i andra organisationer än den studerade organisationen Ica DE Borlänge. Dock bör beaktande tas till den specifika kontexten som föreligger vid implementeringen av materialet. Med stöd av den teoretiska referensramen visar resultaten av analysen ett behov av en ny organisationsstruktur med tydliga roller och nya belöningssystem. Den studerade organisationen är en lärande organisation där ett medarbetarengagemang söker främjas. Genom en ny organisationsstruktur med tydliga roller ökar detta medarbetarengagemanget och fler genomförda förbättringar genomförs snabbare, vilket bidrar till att de anställdas outnyttjade kreativitet tillvaratas på ett framgångsrikt sätt. De nya belöningssystemen flyttar fokus till medarbetarengagemanget och förbättringsarbetet, vilket främjar ett genomsyrande Lean-tänkande i organisationen. Belöningssystemen skapar även jämnare produktionsflöden som höjer arbetssäkerheten, ökar produktionskvalitén, minimerar stress samt skapar goda förutsättningar för att beräkna personalbemanningen. Kvalitativa metoder har använts för datainsamlingen. Dessa utfördes genom en förstudie och en fallstudie. Fallstudien bestod utav bakgrundsintervjuer, en intervjustudie samt en observation. Det empiriska materialet visar att organisationen arbetar med ett omfattande förbättringsarbete i alla organisatoriska nivåer. Både chefer och medarbetare har viljan och ambitionen att få till ett framgångsrikt förbättringsarbete, men trots flera års arbete med Lean efterfrågas ändå mer tid, bättre organisationsstruktur samt en sambandskoordinatör med specialistkompetens som driver förbättringsarbetet framåt. Empirin ger en viss indikation på att förbättringsverksamheten har anpassats och organiserats till den befintliga organisationsstrukturen. Förbättringsarbetet torde bli mer framgångsrikt om verksamheten anpassas och organiseras utefter de anställdas outnyttjade kreativitet istället. I summering av slutsatsen åskådliggörs två centrala variabler som kan bidra till långsiktiga framgångar i arbetet med att tillvarata de anställdas outnyttjade kreativitet. En ny organisationsstruktur med tydliga roller som fokuserar på förbättringsarbetet samt nya belöningssystem för inlämnade förbättringsförslag, skulle vara av stor betydelse för ett långsiktigt medarbetarengagemang i en framgångsrik organisation.