900 resultados para REGIONAL INTEGRATION
Resumo:
In 2011, more than 75,000 people died in road crashes in the ten member countries of the Association of South East Asian Nations (ASEAN) and many times this number sustained long term injuries. Improving road safety outcomes in ASEAN is not only important for the welfare and economic benefit of these countries, but given that a significant proportion of the world's population lives in ASEAN, it will strongly influence whether the aims of the United Nations Decade of Action for Road Safety and the Sustainable Development Goals are reached. Following the ASEAN Senior Transport Officials Meeting in May 2011, the Secretariat requested the Asian Development Bank (ADB) to provide assistance to improve road safety in ASEAN. In response, ADB, funded by the Japan Fund for Poverty Reduction, has funded a package of action to improve road safety in ASEAN, including the development of a new regional road safety strategy. The diversity of the member nations of ASEAN poses significant challenges for the development of the strategy. For example, the road fatality rates per 100,000 population in Malaysia and Thailand are about 5 times greater than in Singapore. In addition, the importance of particular road safety issues varies across the ASEAN countries and for countries which are undergoing rapid motorization, the order of importance may change over the life of the strategy. The development of the ASEAN Regional Road Safety Strategy has adopted the five pillars of road safety of the UN Decade of Action but focused on those aspects which are most relevant at the regional level and where a regional approach will support and facilitate actions taken by individual countries. A draft ASEAN Regional Road Safety Strategy document has been prepared and consultation will further refine its directions and contents. The paper will describe the processes undertaken to identify issues and solutions, the measurement of road safety maturity and behavioural risk factors, and the overall structure and themes of the strategy.
Resumo:
Extensive resources are allocated to managing vertebrate pests, yet spatial understanding of pest threats, and how they respond to management, is limited at the regional scale where much decision-making is undertaken. We provide regional-scale spatial models and management guidance for European rabbits (Oryctolagus cuniculus) in a 260,791 km(2) region in Australia by determining habitat suitability, habitat susceptibility and the effects of the primary rabbit management options (barrier fence, shooting and baiting and warren ripping) or changing predation or disease control levels. A participatory modelling approach was used to develop a Bayesian network which captured the main drivers of suitability and spread, which in turn was linked spatially to develop high resolution risk maps. Policy-makers, rabbit managers and technical experts were responsible for defining the questions the model needed to address, and for subsequently developing and parameterising the model. Habitat suitability was determined by conditions required for warren-building and by above-ground requirements, such as food and harbour, and habitat susceptibility by the distance from current distributions, habitat suitability, and the costs of traversing habitats of different quality. At least one-third of the region had a high probability of being highly suitable (support high rabbit densities), with the model supported by validation. Habitat susceptibility was largely restricted by the current known rabbit distribution. Warren ripping was the most effective control option as warrens were considered essential for rabbit persistence. The anticipated increase in disease resistance was predicted to increase the probability of moderately suitable habitat becoming highly suitable, but not increase the at-risk area. We demonstrate that it is possible to build spatial models to guide regional-level management of vertebrate pests which use the best available knowledge and capture fine spatial-scale processes.
Resumo:
The SiMERR National Survey was one of the first priorities of the National Centre of Science, Information and Communication Technology and Mathematics Education for Rural and Regional Australia (SiMERR Australia), established at the University of New England in July 2004 through a federal government grant. With university based ‘hubs’ in each state and territory, SiMERR Australia aims to support rural and regional teachers, students and communities in improving educational outcomes in these subject areas. The purpose of the survey was to identify the key issues affecting these outcomes. The National Survey makes six substantial contributions to our understanding of issues in rural education. First, it focuses specifically on school science, ICT and mathematics education, rather than on education more generally. Second, it compares the different circumstances and needs of teachers across a nationally agreed geographical framework, and quantifies these differences. Third, it compares the circumstances and needs of teachers in schools with different proportions of Indigenous students. Fourth, it provides greater detail than previous studies on the specific needs of schools and teachers in these subject areas. Fifth, the analyses of teacher ‘needs’ have been controlled for the socio-economic background of school locations, resulting in findings that are more tightly associated with geographic location than with economic circumstances. Finally, most previous reports on rural education in Australia were based upon focus interviews, public submissions or secondary analyses of available data. In contrast, the National Survey has generated a sizable body of original quantitative and qualitative data.
Resumo:
This paper discusses the consistent regularization property of the generalized α method when applied as an integrator to an initial value high index and singular differential-algebraic equation model of a multibody system. The regularization comes from within the discretization itself and the discretization remains consistent over the range of values the regularization parameter may take. The regularization involves increase of the smallest singular values of the ill-conditioned Jacobian of the discretization and is different from Baumgarte and similar techniques which tend to be inconsistent for poor choice of regularization parameter. This regularization also helps where pre-conditioning the Jacobian by scaling is of limited effect, for example, when the scleronomic constraints contain multiple closed loops or singular configuration or when high index path constraints are present. The feed-forward control in Kane's equation models is additionally considered in the numerical examples to illustrate the effect of regularization. The discretization presented in this work is adopted to the first order DAE system (unlike the original method which is intended for second order systems) for its A-stability and same order of accuracy for positions and velocities.
Resumo:
Stakeholder engagement is important for successful management of natural resources, both to make effective decisions and to obtain support. However, in the context of coastal management, questions remain unanswered on how to effectively link decisions made at the catchment level with objectives for marine biodiversity and fisheries productivity. Moreover, there is much uncertainty on how to best elicit community input in a rigorous manner that supports management decisions. A decision support process is described that uses the adaptive management loop as its basis to elicit management objectives, priorities and management options using two case studies in the Great Barrier Reef, Australia. The approach described is then generalised for international interest. A hierarchical engagement model of local stakeholders, regional and senior managers is used. The result is a semi-quantitative generic elicitation framework that ultimately provides a prioritised list of management options in the context of clearly articulated management objectives that has widespread application for coastal communities worldwide. The case studies show that demand for local input and regional management is high, but local influences affect the relative success of both engagement processes and uptake by managers. Differences between case study outcomes highlight the importance of discussing objectives prior to suggesting management actions, and avoiding or minimising conflicts at the early stages of the process. Strong contributors to success are a) the provision of local information to the community group, and b) the early inclusion of senior managers and influencers in the group to ensure the intellectual and time investment is not compromised at the final stages of the process. The project has uncovered a conundrum in the significant gap between the way managers perceive their management actions and outcomes, and community's perception of the effectiveness (and wisdom) of these same management actions.
Resumo:
OBJECTIVE: Lower limb amputation is often associated with a high risk of early post-operative mortality. Mortality rates are also increasingly being put forward as a possible benchmark for surgical performance. The primary aim of this systematic review is to investigate early post-operative mortality following a major lower limb amputation in population/regional based studies, and reported factors that might influence these mortality outcomes. METHODS: Embase, PubMed, Cinahl and Psycinfo were searched for publications in any language on 30 day or in hospital mortality after major lower limb amputation in population/regional based studies. PRISMA guidelines were followed. A self developed checklist was used to assess quality and susceptibility to bias. Summary data were extracted for the percentage of the population who died; pooling of quantitative results was not possible because of methodological differences between studies. RESULTS: Of the 9,082 publications identified, results were included from 21. The percentage of the population undergoing amputation who died within 30 days ranged from 7% to 22%, the in hospital equivalent was 4-20%. Transfemoral amputation and older age were found to have a higher proportion of early post-operative mortality, compared with transtibial and younger age, respectively. Other patient factors or surgical treatment choices related to increased early post-operative mortality varied between studies. CONCLUSIONS: Early post-operative mortality rates vary from 4% to 22%. There are very limited data presented for patient related factors (age, comorbidities) that influence mortality. Even less is known about factors related to surgical treatment choices, being limited to amputation level. More information is needed to allow comparison across studies or for any benchmarking of acceptable mortality rates. Agreement is needed on key factors to be reported.
Resumo:
Salinity gradient power is proposed as a source of renewable energy when two solutions of different salinity are mixed. In particular, Pressure Retarded Osmosis (PRO) coupled with a Reverse Osmosis process (RO) has been previously suggested for power generation, using RO brine as the draw solution. However, integration of PRO with RO may have further value for increasing the extent of water recovery in a desalination process. Consequently, this study was designed to model the impact of various system parameters to better understand how to design and operate practical PRO-RO units. The impact of feed salinity and recovery rate for the RO process on the concentration of draw solution, feed pressure, and membrane area of the PRO process was evaluated. The PRO system was designed to operate at maximum power density of . Model results showed that the PRO power density generated intensified with increasing seawater salinity and RO recovery rate. For an RO process operating at 52% recovery rate and 35 g/L feed salinity, a maximum power density of 24 W/m2 was achieved using 4.5 M NaCl draw solution. When seawater salinity increased to 45 g/L and the RO recovery rate was 46%, the PRO power density increased to 28 W/m2 using 5 M NaCl draw solution. The PRO system was able to increase the recovery rate of the RO by up to 18% depending on seawater salinity and RO recovery rate. This result suggested a potential advantage of coupling PRO process with RO system to increase the recovery rate of the desalination process and reduce brine discharge.
Resumo:
Mechanical stress is an important external factor effecting the development and maintenance of articular cartilage. The metabolite profile of diseased cartilage has been well studied but there is limited information about the variation in metabolite profile of healthy cartilage. With the importance of load in maintaining healthy cartilage, regional differences in metabolite profile associated with differences in load may provide information on how load contributes to the maintenance of healthy cartilage. HR-MAS NMR spectroscopy allows the assessment of tissue samples without modification and was used for assessing the difference in metabolic profile between the load bearing and non-load bearing regions of the bovine articular cartilage. In this preliminary study, we examined cartilage from tibia and femur of four knee joints. Sixteen pairs of 1D-NOESY spectra were acquired. Principle component analysis (PCA) identified chemical shifts responsible for variance. SBASE (AMIX) and the Human Metabolome Database were used in conjunction with previous reported cartilage data for identifying metabolites associated with the PCA results. The major contributors to load-related differences in metabolite profile were N-acetyl groups, lactate and phosphocholine peaks. Integrals of these regions were further analysed using a Student's t-test. In load bearing cartilage regions. N-acetyl groups and phosphocholine were found at significantly higher concentration (p < 0.05 and p < 0.005, respectively) in both femur and tibia, while lactate was reduced in load bearing cartilage (p < 0.005). The results of this pilot HR-MAS NMR study demonstrate its ability to provide useful metabolite information for healthy cartilage.
Resumo:
Teachers working in regional, rural and remote areas of Western Australia often experience a strong sense of geographic and social isolation from peers, colleagues and appropriate support mechanisms due to the huge distances between towns and communities. The projects described here have focused on the use of technology to enhance both teacher and student learning; and assist with Indigenous education and teacher professional learning. Connecting and collaborating through technologies is emerging as a powerful tool for motivating and engaging both teachers and learners within schools. Coupled with the direction of the current Federal Government with the Digital Education Revolution and the Digital Regions initiatives, opportunities for better serving regional, rural and remote communities are discussed, as are some of the current issues and needs related to these schools in Western Australia. The scope of these projects has been such that three guiding principles have been implemented through contextual lenses of varying foci - at the level of an individual, a school, and a community.
Resumo:
This paper reports on outcomes of Phases One and Two of the ALTC Competitive Research and Development Project "Developing Strategies at the Pre-Service Level to Address Critical Teacher Attraction and Retention Issues in Australian Rural, Regional and Remote Schools." This project funded over two years aims to strengthen the capacity and credibility of universities to prepare rural, regional and remote educators, similar to the capacity and credibility that has been created in preparing Australia's rural, regional and remote health workers. There is a strong recognition of the fundamental importance of quality teaching experiences rural, regional and remote schools and throughout this project over 200 pre-service teachers have participated in a curriculum module/object and completed a survey that encourages them to consider teaching in regional Western Australia. The project has mapped current Western Australian rural, regional and remote pre-service teacher education curriculum and field experience model. This mapping completed a comparison of national information with the identification of rural, regional and remote education curriculum and/or field experience models used nationally and internationally. In particular results from Phase One and Two will be presented reporting on the findings of the first year of the project.
Resumo:
This paper reports on the outcomes of a two year ALTC Competitive Research and Development Project that aimed to "Develop Strategies at the Pre-Service Level to Address Critical Teacher Attraction and Retention Issues in Australian Rural, Regional and Remote Schools". As well as developing a ‘training framework’ and teaching guides to increase the capacity and credibility of four universities to prepare educators who might venture out of the metropolitan area to teach, data were gathered from pre-service and graduate teachers to analyse regional resilience. It was found that there was a strong likelihood to participate in a regional practicum and stay in a non-metropolitan community once they graduated from university if they had a positive attitude to regional Western Australia either through a family connection or previous experience. Recommendations from this study emphasise the importance of having pre-service students participate in positive regional experiences early in their university study.
Resumo:
Many teachers working in remote and regional areas have limited access to collegial support networks. This research aimed to examine the existing strategies that were being undertaken by the Department of Education in Western Australia, to provide professional learning to teachers in regional and remote areas. It was important to establish the perceptions of teachers’ access to professional learning from those working at the coalface in geographically dispersed areas. Consequently, the possible opportunity for improving the amount and variety of professional learning, through the application of both synchronous and asynchronous technologies was proposed. The study was guided by the primary research question: “In what ways might technology be used to support professional development of regional and remote teachers in Western Australia?” Generating descriptions of current practice of professional learning along with the teacher perceptions were central to this research endeavour. The study relied on a mixed method research approach in order to attend to the research question. The data were collected in phases, referred to as an explanatory mixed methods design. Quantitative data were collected from 104 participants to provide a general picture of the research problem. To further refine this general picture, qualitative data were collected through interviews and e-interviews of 10 teachers. Participants in the study included graduate teachers, teachers who had taught more than two years, senior teachers and Level Three teachers from seven teaching districts within Western Australia. An investigation into current practice was included in this phase and technologies available to support a professional learning community over distance were documented. The final phase incorporated the formulation of a conceptual framework where a model was developed to facilitate the successful implementation of a professional learning community through the application of synchronous and asynchronous technologies. The study has identified that travel time in order to access professional development is significant and impacts on teachers’ personal time. There are limited relief teachers available in these isolated areas which impacts on the opportunities to access professional development. Teachers face inequities, in terms of promotion, because professional development is explicitly linked to promotional opportunities. Importantly, it was found that professional learning communities are valued, but are often limited by small staff numbers at the geographic locality of the school. Teachers preferred to undertake professional learning in the local context of their district, school or classroom and this professional learning must be established at the need of the individual teacher in line with the school priorities. Teachers reported they were confident in using technology and accessing professional development online if required, however, much uncertainty surrounded the use of web 2.0 technologies for this purpose. The recommendations made from the study are intended to identify how a professional learning community might be enhanced through synchronous and asynchronous technologies.
Rethinking connectedness: improving access to professional learning for regional and remote teachers
Resumo:
Transformation of Australian education is occurring at a rapid rate through the implementation of a number of initiatives. These initiatives include the Digital Education Revolution, the move to a National Curriculum and the implementation of a National Framework for Professional Standards for Teachers and Principals. As these initiatives are rolled out to schools across Australia, the equitable access to professional learning to support all teachers, regardless of their geographical location, is in question. A number of studies have been conducted in Australia that highlight the importance of professional learning and the difficulty faced by regional and remote teachers with regard to access (Gerard Daniels, 2007; Lysons, Cooksey, Panizzon, Parnell & Pegg 2006; Ministerial Review of Schooling, 1994, Rural and Remote Education Advisory Council, 2000; Vinson, 2002). Along with access to professional learning, has been the discussion of effective modes of delivery. Face to face professional learning, in regional and metropolitan areas, is offered in isolation, or in some cases, is complimented with virtual learning environments. The need for a more sustainable approach to professional learning is highly necessary. A mixed method research approach was utilised in order to answer the primary research question "In what ways might technology be used to support professional learning of regional and remote teachers in Western Australia?" This research paper outlines the findings from the study including the significance of travel time; impact of limited relief teachers; implications for promotion and teacher registration; professional learning communities being valued but often limited by small staff numbers; professional learning conducted in the local context being preferred; professional learning established at the teacher and school level being desirable; teachers being confident in using technology and accessing PD online if required; and social cohesiveness being valued and often limited by isolation. Further, this research has culminated in the development of a "model of rethinking connectedness" that would facilitate improving the amount and variety of professional learning available to regional and remote teachers.
Resumo:
The quality of an online university degree is paramount to the student, the reputation of the university and most importantly, the profession that will be entered. At the School of Education within Curtin University, we aim to ensure that students within rural and remote areas are provided with high quality degrees equal to their city counterparts who access face-to-face classes on campus.In 2010, the School of Education moved to flexible delivery of a fully online Bachelor of Education degree for their rural students. In previous years, the degree had been delivered in physical locations around the state. Although this served the purpose for the time, it restricted the degree to only those rural students who were able to access the physical campus. The new model in 2010 allows access for students in any rural area who have a computer and an internet connection, regardless of their geographical location. As a result enrolments have seen a positive increase in new students. Academic staff had previously used an asynchronous environment to deliver learning modules housed within a learning management system (LMS). To enhance the learning environment and to provide high quality learning experiences to students learning at a distance, the adoption of synchronous software was introduced. This software is a real-time virtual classroom environment that allows for communication through Voice over Internet Protocol (VoIP) and videoconferencing, along with a large number of collaboration tools to engage learners. This research paper reports on the professional development of academic staff to integrate a live e-learning solution into their current LMS environment. It involved professional development, including technical orientation for teaching staff and course participants simultaneously. Further, pedagogical innovations were offered to engage the students in a collaborative learning environment. Data were collected from academic staff through semi-structured interviews and participant observation. The findings discuss the perceived value of the technology, problems encountered and solutions sought.