Effect of position of near addition in an asymmetric refractive multifocal intraocular lens on quality of vision

Purpose
To evaluate the impact of the position of an asymmetric multifocal near segment on visual quality.

Setting
Cathedral Eye Clinic, Belfast, United Kingdom.

Design
Retrospective comparative case series.

Methods
Data from consecutive patients who had bilateral implantation of the Lentis Mplus LS-312 multifocal intraocular lens were divided into 2 groups. One group received inferonasal near-segment placement and the other, superotemporal near-segment placement. A +3.00 diopter (D) reading addition (add) was used in all eyes. The main outcome measures included uncorrected distance visual acuity (UDVA), uncorrected near visual acuity (UNVA), contrast sensitivity, and quality of vision. Follow-up was 3 months.

Results
Patients ranged in age from 43 to 76 years. The inferonasal group comprised 80 eyes (40 patients) and the superotemporal group, 76 eyes (38 patients). The mean 3-month spherical equivalent was −0.11 D ± 0.49 (SD) in the inferonasal group and −0.18 ± 0.46 D in the superotemporal group. The mean postoperative UDVA was 0.14 ± 0.10 logMAR and 0.18 ± 0.15 logMAR, respectively. The mean monocular UNVA was 0.21 ± 0.14 logRAD and 0.24 ± 0.13 logRAD, respectively. No significant differences were observed in the higher-order aberrations, total Strehl ratio (point-spread function), or modulation transfer function between the groups. Dysphotopic symptoms measured with a validated quality-of-vision questionnaire were not significantly different between groups.

Conclusion
Positioning of the near add did not significantly affect objective or subjective visual function parameters.

A Computational Approach for Simulating P-type Silicon Piezoresistor Using Four Point Bending Setup

The piezoresistance effect is defined as change in resistance due to applied stress. Silicon has a relatively large piezoresistance effect which has been known since 1954. A four point bending setup is proposed and designed to analyze the piezoresistance effect in p-type silicon. This setup is used to apply uniform and uniaxial stress along the <110> crystal direction. The main aim of this work is to investigate the piezoresistive characteristic of p-type resistors as a function of doping concentrations using COMSOL Multiphysics. Simulation results are compared with experimental data.

Geotechnical monitoring using a combination of LIDAR, real-time dGPS, and electrical tomography to assess geotechnical risk of a coastal landslide.

The Antrim Coast Road stretching from the seaport of Larne in the East of Northern Ireland has a well-deserved reputation for being one of the most spectacular roads in Europe (Day, 2006). However the problematic geology; Jurassic Lias Clay and Triassic Mudstone overlain by Cretaceous Limestone and Tertiary Basalt, and environmental variables result in frequent instances of slope instability manifested in both shallow debris flows and occasional massive rotational movements, creating a geotechnical risk to this highway. This paper describes how a variety of techniques are being used to both assess instability and monitor movement of these active slopes near one site at Straidkilly Point, Glenarm. An in-depth understanding of the geology was obtained via boreholes, resistivity surveys and laboratory testing. Environmental variables recorded by an on-site weather station were correlated with measured pore water pressure and soil moisture infiltration data. Terrestrial LiDAR (TLS), with surveys carried out on a bi-monthly basis allowed for the generation of Digital Elevation Models (DEMs) of difference, highlighting areas of recent movement, accumulation and depletion. Morphology parameters were generated from the DEMs and include slope, curvature and multiple measures of roughness. Changes in the structure of the slope coupled with morphological parameters were characterised and linked to progressive failures from the temporal monitoring. In addition to TLS monitoring, Aerial LiDAR datasets were used for the spatio-morphological characterisation of the slope on a macro scale. A Differential Global Positioning System (dGPS) was also deployed on site to provide a real-time warning system for gross movements, which were also correlated with environmental conditions. Frequent electrical resistivity tomography (ERT) surveys were also implemented to provide a better understanding of long-term changes in soil moisture and help to define the complex geology. The paper describes how the data obtained via a diverse range of methods has been combined to facilitate a more informed management regime of geotechnical risk by the Northern Ireland Roads Service.

Application of the pMHC Array to Characterise Tumour Antigen Specific T Cell Populations in Leukaemia Patients at Disease Diagnosis

Immunotherapy treatments for cancer are becoming increasingly successful, however to further improve our understanding of the T-cell recognition involved in effective responses and to encourage moves towards the development of personalised treatments for leukaemia immunotherapy, precise antigenic targets in individual patients have been identified. Cellular arrays using peptide-MHC (pMHC) tetramers allow the simultaneous detection of different antigen specific T-cell populations naturally circulating in patients and normal donors. We have developed the pMHC array to detect CD8+ T-cell populations in leukaemia patients that recognise epitopes within viral antigens (cytomegalovirus (CMV) and influenza (Flu)) and leukaemia antigens (including Per Arnt Sim domain 1 (PASD1), MelanA, Wilms' Tumour (WT1) and tyrosinase). We show that the pMHC array is at least as sensitive as flow cytometry and has the potential to rapidly identify more than 40 specific T-cell populations in a small sample of T-cells (0.8-1.4 x 106). Fourteen of the twenty-six acute myeloid leukaemia (AML) patients analysed had T cells that recognised tumour antigen epitopes, and eight of these recognised PASD1 epitopes. Other tumour epitopes recognised were MelanA (n = 3), tyrosinase (n = 3) and WT1126-134 (n = 1). One of the seven acute lymphocytic leukaemia (ALL) patients analysed had T cells that recognised the MUC1950-958 epitope. In the future the pMHC array may be used provide point of care T-cell analyses, predict patient response to conventional therapy and direct personalised immunotherapy for patients.

Nanohole arrays enable multiple-point-source imaging

A new type of focal-palne array made of a nanoscale metal screen mimics the function of a lens, focuses light (and plasmons) into subwavelength hot spots, and achieves high-resolution imaging of complex sources.

Smartphone and GPS technology for freeroaming dog population surveillance -a methodological study (Studio metodologico sull’applicazione di smartphone e tecnologia GPS alla sorveglianza delle popolazioni di cani vaganti)

Free-roaming dogs (FRD) represent a potential threat to the quality of life in cities from an ecological, social and public health point of view. One of the most urgent concerns is the role of uncontrolled dogs as reservoirs of infectious diseases transmittable to humans and, above all, rabies. An estimate of the FRD population size and characteristics in a given area is the first step for any relevant intervention programme. Direct count methods are still prominent because of their non-invasive approach, information technologies can support such methods facilitating data collection and allowing for a more efficient data handling. This paper presents a new framework for data collection using a topological algorithm implemented as ArcScript in ESRI® ArcGIS software, which allows for a random selection of the sampling areas. It also supplies a mobile phone application for Android® operating system devices which integrates Global Positioning System (GPS) and Google Maps™. The potential of such a framework was tested in 2 Italian regions. Coupling technological and innovative solutions associated with common counting methods facilitate data collection and transcription. It also paves the way to future applications, which could support dog population management systems.

INVESTIGATING THE ROLE OF NOX NADPH OXIDASE SIGNALLING IN CELL MIGRATION AND ANGIOGENESIS OF ENDOTHELIAL COLONY-FORMING CELLS

Introduction. Endothelial colony-forming cells (ECFCs) hold great cytotherapeutic potential for ischaemic disease. Emerging evidence supports a key role for NADPH oxidases in underlying angiogenic processes of these and other endothelial cells. Aims. To study the influence of Nox NADPH oxidases on the pro-angiogenic function of ECFCs. Methods. Human ECFCs isolated from umbilical cord blood were treated with pro-oxidant PMA and assessed in vitro, both under basal conditions and after siRNA knockdown of Nox4, a key endothelial NADPH oxidase isoform, alongside primary mature human aortic endothelial cells (HAoECs) for comparison, using an established scratch-wound assay as the functional end-point. Results. PMA (500nM for 8h) increased cell migration (control 18.6±2.8, PMA 32.7±6.6% wound closure; n=6, P<0.05) in a superoxide-dependent manner, as indicated by attenuation of this effect in the presence of PEG-SOD. Although HAoEC migration in response to PMA also tended to increase, this did not reach statistical significance. Notably, cell migration at 16h was reduced by Nox4 knockdown in ECFCs (control siRNA 53.4±3.5, Nox4 siRNA 35.1±4.9% closure; n=3, P<0.05), but not in HAoECs, whilst the pro-migratory effect of PMA in ECFCs was potentiated after Nox4 knockdown (control siRNA 53.4±3.5, +PMA 61.5±3.2% closure; n=3, P=NS; Nox4 siRNA 35.1±4.9, +PMA 53.0±4.9% closure; n=3, P<0.05). Conclusion. ECFC migration is enhanced by low concentrations of superoxide, to a greater extent compared to mature endothelial cells, and appears to be at least partly dependent upon NADPH oxidase, including a specific role for Nox4. Although, the precise contribution of endothelial Nox NADPH oxidases isoforms remains to be determined, it is clear that these findings may have significant implications for potential ECFC-based therapies for ischaemic disease, which is associated with an oxidative microenvironment.

Supervisão da gestão curricular flexível para uma escola inclusiva

Os desafios com que a escola da atualidade é confrontada, devido à diversidade da população que a constitui e às sucessivas mudanças que perpassam a sociedade contemporânea, exigem da mesma respostas curriculares contextualizadas. Neste sentido, a Supervisão dos processos de Gestão Curricular Flexível configura-se como uma mais-valia podendo constituir-se um dos meios mais eficazes para a construção de uma Educação Inclusiva numa perspetiva de Escola para Todos. Neste âmbito, o presente estudo tem como principais finalidades aprofundar o conhecimento sobre a importância que a Supervisão pode assumir nos processos de Gestão Curricular Flexível e averiguar qual o seu contributo para a construção de uma Escola Inclusiva. Tratou-se de um estudo de caso, desenvolvido num Agrupamento de Escolas do distrito de Aveiro. Teve como participantes o diretor do Agrupamento, os responsáveis pelo 1º CEB e pela Educação Especial e os coordenadores de departamento do 1º CEB e da Educação Especial. Contou ainda com a participação dos professores do 1º CEB, de Educação Especial e do Apoio Educativo do referido Agrupamento. Este estudo desenvolveu-se de acordo com uma abordagem de natureza qualitativa e interpretativa, recorrendo-se a uma metodologia de natureza mista. Assim, e de forma a ser possível construir a visão mais holística e integrada que o objeto de estudo pressupõe, utilizámos um conjunto diverso e complementar de técnicas e instrumentos de investigação, nomeadamente, o inquérito por entrevista (entrevista semiestruturada) e o inquérito por questionário. Como fontes de informação complementar, recorremos à análise documental e às notas de campo. Os resultados do estudo sugerem que os participantes, no que concerne às perceções sobre a Educação Inclusiva, manifestam uma visão ampla do conceito, orientada para Todos os alunos. Relativamente às perceções acerca da Gestão Curricular Flexível, verificamos que os participantes se referem a ela por oposição a uma gestão curricular de cariz uniforme e que a mesma parece ser entendida como um processo que possibilita a contextualização do currículo sem deixar de ter em consideração o currículo nacional. No que respeita às perceções sobre Supervisão dos processos de Gestão Curricular Flexível, de modo global, os participantes parecem perspetivá-la como uma forma de acompanhar, apoiar e regular as práticas curriculares dos professores, sobretudo através da observação e da reflexão conjunta, ajudando-os a encontrarem melhores soluções para os problemas com os quais se confrontam, evidenciando-se como um contributo para a promoção de uma Educação Inclusiva.

Cooperative positioning for heterogeneous wireless systems

Future emerging market trends head towards positioning based services placing a new perspective on the way we obtain and exploit positioning information. On one hand, innovations in information technology and wireless communication systems enabled the development of numerous location based applications such as vehicle navigation and tracking, sensor networks applications, home automation, asset management, security and context aware location services. On the other hand, wireless networks themselves may bene t from localization information to improve the performances of di erent network layers. Location based routing, synchronization, interference cancellation are prime examples of applications where location information can be useful. Typical positioning solutions rely on measurements and exploitation of distance dependent signal metrics, such as the received signal strength, time of arrival or angle of arrival. They are cheaper and easier to implement than the dedicated positioning systems based on ngerprinting, but at the cost of accuracy. Therefore intelligent localization algorithms and signal processing techniques have to be applied to mitigate the lack of accuracy in distance estimates. Cooperation between nodes is used in cases where conventional positioning techniques do not perform well due to lack of existing infrastructure, or obstructed indoor environment. The objective is to concentrate on hybrid architecture where some nodes have points of attachment to an infrastructure, and simultaneously are interconnected via short-range ad hoc links. The availability of more capable handsets enables more innovative scenarios that take advantage of multiple radio access networks as well as peer-to-peer links for positioning. Link selection is used to optimize the tradeo between the power consumption of participating nodes and the quality of target localization. The Geometric Dilution of Precision and the Cramer-Rao Lower Bound can be used as criteria for choosing the appropriate set of anchor nodes and corresponding measurements before attempting location estimation itself. This work analyzes the existing solutions for node selection in order to improve localization performance, and proposes a novel method based on utility functions. The proposed method is then extended to mobile and heterogeneous environments. Simulations have been carried out, as well as evaluation with real measurement data. In addition, some speci c cases have been considered, such as localization in ill-conditioned scenarios and the use of negative information. The proposed approaches have shown to enhance estimation accuracy, whilst signi cantly reducing complexity, power consumption and signalling overhead.

Advanced energy efficient coordinated multi-point transmission for OFDMA

The ever-growing energy consumption in mobile networks stimulated by the expected growth in data tra ffic has provided the impetus for mobile operators to refocus network design, planning and deployment towards reducing the cost per bit, whilst at the same time providing a signifi cant step towards reducing their operational expenditure. As a step towards incorporating cost-eff ective mobile system, 3GPP LTE-Advanced has adopted the coordinated multi-point (CoMP) transmission technique due to its ability to mitigate and manage inter-cell interference (ICI). Using CoMP the cell average and cell edge throughput are boosted. However, there is room for reducing energy consumption further by exploiting the inherent exibility of dynamic resource allocation protocols. To this end packet scheduler plays the central role in determining the overall performance of the 3GPP longterm evolution (LTE) based on packet-switching operation and provide a potential research playground for optimizing energy consumption in future networks. In this thesis we investigate the baseline performance for down link CoMP using traditional scheduling approaches, and subsequently go beyond and propose novel energy e fficient scheduling (EES) strategies that can achieve power-e fficient transmission to the UEs whilst enabling both system energy effi ciency gain and fairness improvement. However, ICI can still be prominent when multiple nodes use common resources with di fferent power levels inside the cell, as in the so called heterogeneous networks (Het- Net) environment. HetNets are comprised of two or more tiers of cells. The rst, or higher tier, is a traditional deployment of cell sites, often referred to in this context as macrocells. The lower tiers are termed small cells, and can appear as microcell, picocells or femtocells. The HetNet has attracted signiffi cant interest by key manufacturers as one of the enablers for high speed data at low cost. Research until now has revealed several key hurdles that must be overcome before HetNets can achieve their full potential: bottlenecks in the backhaul must be alleviated, as well as their seamless interworking with CoMP. In this thesis we explore exactly the latter hurdle, and present innovative ideas on advancing CoMP to work in synergy with HetNet deployment, complemented by a novel resource allocation policy for HetNet tighter interference management. As system level simulator has been used to analyze the proposed algorithm/protocols, and results have concluded that up to 20% energy gain can be observed.

In search of reliable centimeter-level indoor positioning: a smartphone-based approach

This thesis describes the design and implementation of a reliable centimeter-level indoor positioning system fully compatible with a conventional smartphone. The proposed system takes advantage of the smartphone audio I/O and processing capabilities to perform acoustic ranging in the audio band using non-invasive audio signals and it has been developed having in mind applications that require high accuracy, such as augmented reality, virtual reality, gaming and audio guides. The system works in a distributed operation mode, i.e. each smartphone is able to obtain its own position using only acoustic signals. To support the positioning system, a Wireless Sensor Network (WSN) of synchronized acoustic beacons is used. To keep the infrastructure in sync we have developed an Automatic Time Synchronization and Syntonization (ATSS) protocol with a standard deviation of the sync offset error below 1.25 μs. Using an improved Time Difference of Arrival (TDoA) estimation approach (which takes advantage of the beacon signals’ periodicity) and by performing Non-Line-of-Sight (NLoS) mitigation, we were able to obtain very stable and accurate position estimates with an absolute mean error of less than 10 cm in 95% of the cases and a mean standard deviation of 2.2 cm for a position refresh period of 350 ms.