The concept of smart cities

Rapid urbanization has resulted in migration of people in urban areas and spatial expansion of urban infrastructures, consequently causing many undesirable malaises and challenges. Concerned with the uncontrolled growth of cities and the associated malaises, there have been numerous initiatives to promote a more rational development of cities. The idea of making cities smart is one of the most promising initiatives which have been a subject of research and development in modern cities. Despite the many activities and initiatives to promote smartness in cities, there is little agreement on what constitute smartness in a city. This inevitably leads to a diversified ways of defining smart cities. By reviewing the existing definitions of smart cities, this paper proposes a framework to define and measure a city’s smartness in a more correct manner.

IS service quality as a multi-dimensional formative constuct

This study is motivated by, and proceeds from, a central interest in the importance of evaluating IS service quality and adopts the IS ZOT SERVQUAL instrument (Kettinger & Lee, 2005) as its core theory base. This study conceptualises IS service quality as a multidimensional formative construct and seeks to answer the main research questions: “Is the IS service quality construct valid as a 1st-order formative, 2nd-order formative multidimensional construct?” Additionally, with the aim of validating the IS service quality construct within its nomological net, as in prior service marketing work, Satisfaction was hypothesised as its immediate consequence. With the goal of testing the above research question, IS service quality and Satisfaction were operationalised in a quantitative survey instrument. Partial least squares (PLS), employing 219 valid responses, largely evidenced the validity of IS service quality as a multidimensional formative construct. The nomological validity of the IS service quality construct was also evidenced by demonstrating that 55% of Satisfaction was explained by the multidimensional formative IS service quality construct.

A two-metal ion mechanism operates in the hammerhead ribozyme-mediated cleavage of an RNA substrate

Evidence for a two-metal ion mechanism for cleavage of the HH16 hammerhead ribozyme is provided by monitoring the rate of cleavage of the RNA substrate as a function of La3+ concentration in the presence of a constant concentration of Mg2+. We show that a bell-shaped curve of cleavage activation is obtained as La3+ is added in micromolar concentrations in the presence of 8 mM Mg2+, with a maximal rate of cleavage being attained in the presence of 3 microM La3+. These results show that two-metal ion binding sites on the ribozyme regulate the rate of the cleavage reaction and, on the basis of earlier estimates of the Kd values for Mg2+ of 3.5 mM and > 50 mM, that these sites bind La3+ with estimated Kd values of 0.9 and > 37.5 microM, respectively. Furthermore, given the very different effects of these metal ions at the two binding sites, with displacement of Mg2+ by La3+ at the stronger (relative to Mg2+) binding site activating catalysis and displacement of Mg2+ by La3+ at the weaker (relative to Mg2+) (relative to Mg2+) binding site inhibiting catalysis, we show that the metal ions at these two sites play very different roles. We argue that the metal ion at binding site 1 coordinates the attacking 2'-oxygen species in the reaction and lowers the pKa of the attached proton, thereby increasing the concentration of the attacking alkoxide nucleophile in an equilibrium process. In contrast, the role of the metal ion at binding site 2 is to catalyze the reaction by absorbing the negative charge that accumulates at the leaving 5'-oxygen in the transition state. We suggest structural reasons why the Mg(2+)-La3+ ion combination is particularly suited to demonstrating these different roles of the two-metal ions in the ribozyme cleavage reaction.

Observations on catalysis by hammerhead ribozymes are consistent with a two-divalent-metal-ion mechanism

Significant cleavage by hammerhead ribozymes requires activation by divalent metal ions. Several models have been proposed to account for the influence of metal ions on hammerhead activity. A number of recent papers have presented data that have been interpreted as supporting a one-metal-hydroxide-ion mechanism. In addition, a solvent deuterium isotope effect has been taken as evidence against a proton transfer in the rate-limiting step of the cleavage reaction. We propose that these data are more easily explained by a two-metal-ion mechanism that does not involve a metal hydroxide, but does involve a proton transfer in the rate-limiting step.

ACE research briefing paper 005: Global Entrepreneurship Monitor (GEM) - Australia 2011 National Report

This report maps the current state of entrepreneurship in Australia using data from the Global Entrepreneurship Monitor (GEM) for the year 2011. Entrepreneurship is regarded as a crucial driver for economic well-being. Entrepreneurial activity in new and established firms drives innovation and creates jobs. Entrepreneurs also fuel competition thereby contributing indirectly to market and productivity growth along with improving competitiveness of the national economy. Given the economic landscape that exists as a result of the global financial crisis (GFC), it is probably more important than ever for us to understand the effects and drivers of entrepreneurial activity and attitudes in Australia. The central finding of this report is that entrepreneurship is certainly alive and well in Australia. With 10.5 per cent of the adult population involved in setting up a new business or owning a newly founded business as measured by the total entrepreneurial activity rate (TEA) in 2011, Australia ranks second only to the United States among the innovation-driven (developed) economies. Compared with 2010 the TEA rate has increased by 2.7 percentage points. Furthermore, in regard to employee entrepreneurial activity (EEA) rate in established firms, Australia ranks above average. According to GEM data, 5 per cent of the adult population is engaged in developing or launching new products, a new business unit or subsidiary for their employer. Further analysis of the GEM data also clearly shows that Australia compares well with other major economies in terms of the ‘quality’ of entrepreneurial activities being pursued. Indeed, it is not only the quantity of entrepreneurs but also the level of their aspirations and business goals that are important drivers for economic growth. On average, for each business started in Australia driven by the lack of alternatives for the founder to generate income from any other source, there are five other businesses started where the founders specifically want to take advantage of a business opportunity that they believe will increase their personal income or independence. With respect to innovativeness, 31 per cent of Australian new businesses offer products or services which they consider to be new to customers or where very few, or in some cases no, other businesses offer the same product or service. Both these indicators are higher than the average for innovation-driven economies. Somewhat below average is the international orientation of Australian entrepreneurs whereby only 12 per cent aim at having a substantial share of customers from international markets. So what drives this high quantity and quality of entrepreneurship in Australia? The analysis of the data suggests it is a combination of both business opportunities and entrepreneurial skills. It seems that around 50 per cent of the Australian population identify opportunities for a start-up venture and believe that they have the necessary skills to start a business. Furthermore, a large majority of the Australian population report that high media attention for entrepreneurship provides successful role models for prospective entrepreneurs. As a result, 12 per cent of our respondents have expressed the intention to start a business within the next three years. These numbers are all well above average when compared to the other major economies. With regard to gender, the GEM survey shows a high proportion of female entrepreneurs. Approximately 8.4 per cent of adult females are actually involved in setting up a business or have recently done so. Although this female TEA rate is slightly down from 2010, Australia ranks second among the innovation-driven economies. This paints a healthy picture of access to entrepreneurial opportunities for Australian women.

Promoting Staywild: An examination of promotional strategies for a niche online

This paper will provide an overview of a joint research initiative by the Queensland University of Technology in conjunction with the Australian Smart Services Cooperative Research Centre into the development and analysis of online communities (OLCs). This project aimed to create an exciting and innovative web space (Staywild.com.au) around the concept of adventure travel. This paper considers the literature on promoting and building online communities. It also discusses methods for promotion and encouraging participation. These methods emerged from the literature and the results of a Staywild user survey. In our research for this paper we found little work that focused on promoting and building OLCs for non-profit organisations. This paper thus contributes to the field in its work towards developing a standardised method of marketing and promotion that can be applied to niche non-profit communities.

Evaluating the success of large-scale, integrated information systems through the lens of IS-impact and IS-support

This study proceeds from a central interest in the importance of systematically evaluating operational large-scale integrated information systems (IS) in organisations. The study is conducted within the IS-Impact Research Track at Queensland University of Technology (QUT). The goal of the IS-Impact Track is, "to develop the most widely employed model for benchmarking information systems in organizations for the joint benefit of both research and practice" (Gable et al, 2009). The track espouses programmatic research having the principles of incrementalism, tenacity, holism and generalisability through replication and extension research strategies. Track efforts have yielded the bicameral IS-Impact measurement model; the ‘impact’ half includes Organisational-Impact and Individual-Impact dimensions; the ‘quality’ half includes System-Quality and Information-Quality dimensions. Akin to Gregor’s (2006) analytic theory, the ISImpact model is conceptualised as a formative, multidimensional index and is defined as "a measure at a point in time, of the stream of net benefits from the IS, to date and anticipated, as perceived by all key-user-groups" (Gable et al., 2008, p: 381). The study adopts the IS-Impact model (Gable, et al., 2008) as its core theory base. Prior work within the IS-Impact track has been consciously constrained to Financial IS for their homogeneity. This study adopts a context-extension strategy (Berthon et al., 2002) with the aim "to further validate and extend the IS-Impact measurement model in a new context - i.e. a different IS - Human Resources (HR)". The overarching research question is: "How can the impacts of large-scale integrated HR applications be effectively and efficiently benchmarked?" This managerial question (Cooper & Emory, 1995) decomposes into two more specific research questions – In the new HR context: (RQ1): "Is the IS-Impact model complete?" (RQ2): "Is the ISImpact model valid as a 1st-order formative, 2nd-order formative multidimensional construct?" The study adhered to the two-phase approach of Gable et al. (2008) to hypothesise and validate a measurement model. The initial ‘exploratory phase’ employed a zero base qualitative approach to re-instantiating the IS-Impact model in the HR context. The subsequent ‘confirmatory phase’ sought to validate the resultant hypothesised measurement model against newly gathered quantitative data. The unit of analysis for the study is the application, ‘ALESCO’, an integrated large-scale HR application implemented at Queensland University of Technology (QUT), a large Australian university (with approximately 40,000 students and 5000 staff). Target respondents of both study phases were ALESCO key-user-groups: strategic users, management users, operational users and technical users, who directly use ALESCO or its outputs. An open-ended, qualitative survey was employed in the exploratory phase, with the objective of exploring the completeness and applicability of the IS-Impact model’s dimensions and measures in the new context, and to conceptualise any resultant model changes to be operationalised in the confirmatory phase. Responses from 134 ALESCO users to the main survey question, "What do you consider have been the impacts of the ALESCO (HR) system in your division/department since its implementation?" were decomposed into 425 ‘impact citations.’ Citation mapping using a deductive (top-down) content analysis approach instantiated all dimensions and measures of the IS-Impact model, evidencing its content validity in the new context. Seeking to probe additional (perhaps negative) impacts; the survey included the additional open question "In your opinion, what can be done better to improve the ALESCO (HR) system?" Responses to this question decomposed into a further 107 citations which in the main did not map to IS-Impact, but rather coalesced around the concept of IS-Support. Deductively drawing from relevant literature, and working inductively from the unmapped citations, the new ‘IS-Support’ construct, including the four formative dimensions (i) training, (ii) documentation, (iii) assistance, and (iv) authorisation (each having reflective measures), was defined as: "a measure at a point in time, of the support, the [HR] information system key-user groups receive to increase their capabilities in utilising the system." Thus, a further goal of the study became validation of the IS-Support construct, suggesting the research question (RQ3): "Is IS-Support valid as a 1st-order reflective, 2nd-order formative multidimensional construct?" With the aim of validating IS-Impact within its nomological net (identification through structural relations), as in prior work, Satisfaction was hypothesised as its immediate consequence. The IS-Support construct having derived from a question intended to probe IS-Impacts, too was hypothesised as antecedent to Satisfaction, thereby suggesting the research question (RQ4): "What is the relative contribution of IS-Impact and IS-Support to Satisfaction?" With the goal of testing the above research questions, IS-Impact, IS-Support and Satisfaction were operationalised in a quantitative survey instrument. Partial least squares (PLS) structural equation modelling employing 221 valid responses largely evidenced the validity of the commencing IS-Impact model in the HR context. ISSupport too was validated as operationalised (including 11 reflective measures of its 4 formative dimensions). IS-Support alone explained 36% of Satisfaction; IS-Impact alone 70%; in combination both explaining 71% with virtually all influence of ISSupport subsumed by IS-Impact. Key study contributions to research include: (1) validation of IS-Impact in the HR context, (2) validation of a newly conceptualised IS-Support construct as important antecedent of Satisfaction, and (3) validation of the redundancy of IS-Support when gauging IS-Impact. The study also makes valuable contributions to practice, the research track and the sponsoring organisation.

Normative influences across cultures : conceptual differences and potential confounders among drivers in Australia and China

Normative influences on road user behaviour have been well documented and include such things as personal, group, subjective and moral norms. Commonly, normative factors are examined within one cultural context, although a few examples of exploring the issue across cultures exist. Such examples add to our understanding of differences in perceptions of the normative factors that may exert influence on road users and can assist in determining whether successful road safety interventions in one location may be successful in another. Notably, the literature is relatively silent on such influences in countries experiencing rapidly escalating rates of motorization. China is one such country where new drivers are taking to the roads in unprecedented numbers and authorities are grappling with the associated challenges. This paper presents results from qualitative and quantitative research on self-reported driving speeds of car drivers and related issues in Australia and China. Focus group interviews and questionnaires conducted in each country examined normative factors that might influence driving in each cultural context. Qualitative findings indicated perceptions of community acceptance of speeding were present in both countries but appeared more widespread in China, yet quantitative results did not support this difference. Similarly, with regard to negative social feedback from speeding, qualitative findings suggested no embarrassment associated with speeding among Chinese participants and mixed results among Australian participants, yet quantitative results indicated greater embarrassment for Chinese drivers. This issue was also examined from the perspective of self-identity and findings were generally similar across both samples and appear related to whether it is important to be perceived as a skilled/safe driver by others. An interesting and important finding emerged with regard to how Chinese drivers may respond to questions about road safety issues if the answers might influence foreigners’ perceptions of China. In attempting to assess community norms associated with speeding, participants were asked to describe what they would tell a foreign visitor about the prevalence of speeding in China. Responses indicated that if asked by a foreigner, people may answer in a manner that portrayed China as a safe country (e.g., that drivers do not speed), irrespective of the actual situation. This ‘faking good for foreigners’ phenomenon highlights the importance of considering ‘face’ when conducting research in China – a concept absent from the road safety literature. An additional noteworthy finding that has been briefly described in the road safety literature is the importance and strength of the normative influence of social networks (guanxi) in China. The use of personal networks to assist in avoiding penalties for traffic violations was described by Chinese participants and is an area that could be addressed to strengthen the deterrent effect of traffic law enforcement. Overall, the findings suggest important considerations for developing and implementing road safety countermeasures in different cultural contexts.

Crimes against morality

The purpose of this chapter is to discuss the relationship between crime and morality, with a specific focus on crimes against morality. While we argue that all crimes have a general moral basis, condemned as ‘wrong’ or ‘bad’ and proscribed by a society, there is a specific group of offences in modern democratic nations labelled crimes against morality. Included within this group are offences related to prostitution, pornography and homosexuality. What do these crimes have in common? Most clearly they tend to have a sexual basis and are often argued to do sexual harm, in both a moral and/or psychological sense, as well as physically. Conversely they are often argued to be victimless crimes, especially when the acts occur between consenting adults. Finally, they are considered essentially private acts but they often occur and, are regulated, in the public domain. Most importantly, each of these crimes against morality has only relatively recently (i.e. in the past 150 years) become identified and regulated by the state as a criminal offence. First, we discuss philosophically the issue of morality and its historical relationship to Christianity, especially with regard to the issue of prostitution. Second, we examine the relationship between public and private morality and how this distinction regulates licit and illicit sex in our society through the example of homosexuality. Finally we discuss the notion of the victimless crime through the example of pornography.

Teaching in Inclusive School Communities

"Teaching in Inclusive School Communities, 1st Edition is the essential resource to provide pre-service teachers with the most contemporary, ethical and useful framework for incorporating diversity and inclusive practices in today’s classroom. Fourteen concise chapters compose a focused picture of the values and beliefs that inform the inclusive education approach, with the most up-to-date connections to curriculum and pedagogy throughout. Complemented by the latest research in the field, this text provides the practical knowledge and skills needed for inclusive classroom teaching in Australia and New Zealand, as well as a thorough analysis of exactly what is required to build respectful relationships in modern school communities."--publisher website

Is diurnal temperature range a risk factor for childhood diarrhea?

Background Previous studies have found that high and cold temperatures increase the risk of childhood diarrhea. However, little is known about whether the within-day variation of temperature has any effect on childhood diarrhea. Methods A Poisson generalized linear regression model combined with a distributed lag non-linear model was used to examine the relationship between diurnal temperature range and emergency department admissions for diarrhea among children under five years in Brisbane, from 1st January 2003 to 31st December 2009. Results There was a statistically significant relationship between diurnal temperature range and childhood diarrhea. The effect of diurnal temperature range on childhood diarrhea was the greatest at one day lag, with a 3% (95% confidence interval: 2%–5%) increase of emergency department admissions per 1°C increment of diurnal temperature range. Conclusion Within-day variation of temperature appeared to be a risk factor for childhood diarrhea. The incidence of childhood diarrhea may increase if climate variability increases as predicted.

Culture, technology and the city

The 21st century has been described as the “century of cities”. By 2030, 70 per cent of the world’s population will live in cities, with the most rapid urbanization occurring in the developing world. This paper will draw up geographer Ed Soja’s concept of the “spatial turn” in social theory to consider how the culture of cities can act as a catalyst to innovation and the development of new technologies. In doing so, the paper will develop a three-layered approach to culture as: the arts; the way of life of people and communities; and the embedded structure underpinning socio-economic relations. It will also consider technology at a three-layered element, including devices, practices and ‘logics’ of technology, or what the Greeks termed techne. The paper will consider recent approaches to urban cultural policy, including cluster development and creative cities, and suggest some alternatives, noting that a problem with current approaches is that they focus excessively upon production (clusters) or consumption (creative cities). It will also consider the development of digital creative industries such as games, and the strategies of different cities to develop an innovation culture.

Comparing retail union strategy in a neoliberal context

Amongst the most vulnerable workers in a neoliberal world are retail employees. In many countries these low paid workers comprise around 10 per cent of the workforce. The retail labour market is highly feminised, in some countries quite youthful and often part time or in various forms of precarious employment. The industry and its unions have however rarely been studied by academics. A three-country research team (United Kingdom, Australia and New Zealand) is investigating retail union strategy across these Anglophone countries in order to determine how, and how effectively, unions are contributing to workplace justice for retail workers.