Orientation dependence of stored energy of cold work in semi-processed electrical steels after temper rolling

Microhardness measurements were carried out in a low carbon lamination steel after 6% of temper rolling, in order to evaluate local variations of work hardening as a function of crystallographic orientation. EBSD (electron back scattered diffraction) was used to determine grain orientations with respect to individual rolling planes and rolling directions. Hardness was shown to increase with the local Taylor factor. TEM observations and a well-known dislocation hardening model were used to confirm the equivalence between hardness values and the stored energy of cold work. A definite correlation between stored energy and Taylor factors could therefore be established, being more consistent than previous data reported in the literature. The improvement was thought to be related to the rather small plastic deformation, during which Taylor factors could be considered to remain constant. (c) 2006 Elsevier B.V. All rights reserved.

Influence of alkaline extraction on the characteristics of humic substances in Brazilian soils

An investigation was made of the influence of alkaline extraction on the characteristics of humic substances extracted from Brazilian soil samples. Humic substances (HS) from seven different soils samples collected in Brazil were extracted using the procedure recommended by the International Humic Substances Society (IHSS). Soils, HS and humins were characterized by thermogravimetry and differential thermal analysis. About 8 mg of each material (soil, HS and humin) were placed in a platinum crucible and heated continuously from 20 to 750 degrees C at a heating rate of 10 degrees C min(-1) in an atmosphere of synthetic air (100 ml min(-1)). A thermal analysis revealed a difference between the content and structural characteristics of organic matter present in HS and humin fractions in relation to their soils. The results indicated that alkaline extraction alters the characteristics of humic substances during the extraction process, underlining the importance of developing methodologies and analytical procedures that allow organic matter in soils to be studied without extracting it. (c) 2005 Elsevier B.V. All rights reserved.

Adubação nitrogenada no consórcio de milho com duas espécies de braquiária em sistema plantio direto

O objetivo deste trabalho foi avaliar a produtividade de grãos e de forragem do consórcio entre milho e espécies de braquiária (safras de 2008/2009 e 2009/2010), submetidos a doses de nitrogênio em cobertura, em sistema plantio direto. Utilizou-se o delineamento experimental inteiramente casualizado, com quatro repetições, em arranjo fatorial 2x5, com duas espécies de braquiária (Urochloa brizantha 'Xaraés' e U. ruziziensis) e cinco doses de N aplicadas em cobertura: 0, 50, 100, 150 e 200 kg ha‑1. Foram avaliados: leituras indiretas do teor foliar de clorofila (índice de clorofila Falker, ICF), teores de macronutrientes foliares, componentes da produção e produtividade de grãos do milho, e produtividade de matéria seca das forrageiras após o consórcio. Constatou-se que a espécie U. ruziziensis foi a mais competitiva com o milho em consórcio, o que proporcionou menores teores nutricionais e ICF nas duas safras analisadas. O crescimento vegetativo, os componentes da produção e a produtividade de grãos do milho não foram influenciados pelos consórcios. A adubação nitrogenada em cobertura aumenta linearmente o ICF, os teores de N, P e S, bem como os componentes da produção e a produtividade de grãos.

Uso de etil-trinexapac em cultivares de arroz de terras altas

O acamamento de plantas em cultivares de arroz, no momento da colheita, acarreta perdas significativas à produtividade. O uso de reguladores vegetais é uma das alternativas para reduzir o acamamento, entretanto, as informações sobre este assunto ainda são escassas. Este trabalho foi desenvolvido com o objetivo de avaliar o uso de doses de etil-trinexapac (0 g ha-1, 50 g ha-1, 100 g ha-1, 150 g ha-1 e 200 g ha-1 do i.a.), aplicadas por ocasião da diferenciação floral, em cultivares de arroz com diferentes tipos de plantas (Caiapó - tradicional; BRS Primavera e BRS Soberana - intermediário; e IAC 202 - moderno), avaliando o desenvolvimento e a produtividade de grãos. O experimento foi desenvolvido no município de Selvíria (MS), durante o ano agrícola de 2007/2008. Concluiu-se que a aplicação de 50 g ha-1, 100 g ha-1 e 150 g ha-1 de etil-trinexapac, por ocasião da diferenciação do primórdio da panícula das cultivares Caiapó, BRS Soberana e BRS Primavera, respectivamente, reduziu a altura de plantas e proporcionou ausência de acamamento; a cultivar IAC 202 dispensou o uso de regulador de crescimento, considerando-se que a mesma praticamente não apresentou acamamento; a aplicação de 50 g ha-1 e 150 g ha-1 de etil-trinexapac, por ocasião da diferenciação do primórdio da panícula, melhorou a produtividade da cultivar Caiapó e BRS Primavera, respectivamente, e a dose de 100 g ha-1 interferiu pouco na cultivar BRS Soberana.

Síntese de catalisadores nanoporosos na ausência total e parcial de direcionadores orgânicos para pirólise catalítica de óleos pesados e intermediários

The processing of heavy oil produced in Brazil is an emergency action and a strategic plan to obtain self-sufficiency and economic surpluses. Seen in these terms, it is indispensable to invest in research to obtain new catalysts for obtaining light fraction of hydrocarbons from heavy fractions of petroleum. This dissertation for the degree of Doctor of Philosophy reports the materials preparation that combine the high catalytic activity of zeolites with the greater accessibility of the mesoporosity, more particularly the HZSM-5/MCM-41 hybrid, done by synthesis processes with less environmental impact than conventional ones. Innovative methodologies were developed for the synthesis of micro-mesoporous hybrid material by dual templating mechanism and from crystalline zeolitic aluminosilicate in the absence of organic template. The synthesis of hybrid with pore bimodal distribution took place from one-single organic directing agent aimed to eliminate the use of organic templates, acids of any kind or organic solvents like templating agent of crystalline zeolitic aluminosilicate together with temperature-programmed microwave-assisted, making the experimental procedures of preparation most practical and easy, with good reproducibility and low cost. The study about crystalline zeolitic aluminosilicate in the absence of organic template, especially MFI type, is based on use of H2O and Na+ cation playing a structural directing role in place of an organic template. Advanced characterization techniques such as X-Ray Diffraction (XRD), Fourier Transform Infrared Spectroscopy (FTIR), Scanning Electron Microscopy (SEM), Highresolution Transmission Electron Microscopy (HRTEM), Adsorption of N2 and CO2, kinetic studies by Thermogravimetric Analysis (TGA) and Pyrolysis coupled to Gas Chromatography/Mass Spectrometry (Pyrolysis-GC/MS) were employed in order to evaluate the synthesized materials. Achieve the proposed objectives, has made available a set of new methodologies for the synthesis of zeolite and hybrid micro-mesoporous material, these suitable for catalytic pyrolysis of heavy oils aimed at producing light fraction

Correlação linear e espsacial entre a produtividade de feijão e a porosidade de um Latossolo Vermelho de Selvíria (MS)

Soil porosity influences plant development since root growth and crop yield are determined by the root depth. The objective of this study was to investigate the linear and spatial variability and correlations between common bean yield and soil porosity. The bean grain yield of the irrigated cultivar Carioca IAC was analyzed in the growing season 2004/2005, in Selviria-MS, as well as macroporosity (MA), microporosity (MI) and total porosity (TP), in a Dystroferric Red Latosol, at four depths: 1 (0.0-0.10 m), 2 (0.10-0.20 M), 3 (0.20-0.30 m) and 4 (0.30-0.40 m). Soil and plant data were collected in a geostatistical grid with 135 points spaced 10 m apart, covering an area of 50 x 150 m. The data of the studied attributes did not vary randomly and the values were intermediate to low. They followed well-defined spatial standards, reaching between 11.70-104.40 m. on the other hand, the linear correlation between the plant and soil attributes was low, due to the high number of observations. Grain yield had the best linear correlations with MA1b, MI1 and TP3. From the spatial point of view, the inverse correlation between PG and #TP2 was outstanding. At the sites where #TP2 diminished (0.030-0.045 m(3) m(-3)) the yield varied from 2,173 to 3,529 kg ha(-1) and where it increased (0.045-0.076 m(3) m(-3)), the yield was between 1,630 and 2,173 kg ha(-1). Therefore, the total soil porosity, evaluated in the 0.10-0.20 m layer (#TP2), indicated the importance of the contact root/soil and was in turn a satisfactory indicator of soil physical quality, with a view to the grain yield of irrigated common bean.

Aplicação de dessecantes na cultura de soja: antecipação da colheita e produção de sementes

Este trabalho foi conduzido no município de Selvíria-MS, semeando soja do cultivar IAC-15. O delineamento experimental utilizado foi o de blocos casualizados, estando os tratamentos dispostos em um esquema fatorial 3x3 e 4x4, sendo os fatores os produtos (dessecantes) e as épocas de aplicação, nos anos agrícolas 1996/97 e 1997/98, respectivamente. Os dessecantes utilizados foram: paraquat, diquat e mistura paraquat + diquat, nas dosagens de 0,4; 0,3 e 0,2+0,15 em 1996/97, respectivamente, e os mesmos tratamentos em 1997/98, além do glufosinato de amônio na dosagem de 0,4 kg i.a. ha-1 em 1997/98. Como épocas, foram realizadas três aplicações em 1996/97 e quatro em 1997/98, todas espaçadas de cinco dias a partir do estádio fenológico médio da cultura R6. Concluiu-se que os dessecantes utilizados mostraram-se eficientes na dessecação da soja; foi possível obter antecipação da colheita de sementes de soja, sem alterar a produção, por um período máximo de sete dias.

Modelos de tomada de decisão e sua relação com a informação orgânica

O processo decisório compreende a aplicação de diferentes modelos de tomada de decisão, cada um deles pertinente a uma determinada situação. Entre eles, destacamos como principais os modelos racional, processual, anárquico e político. Para este trabalho, utilizamos os conceitos de Choo (2003), por se tratar de uma das principais obras a respeito do tema existente na literatura e, assim, analisamos cada um dos modelos propostos pelo autor. A partir da análise dos modelos, foi possível estabelecer relações entre eles e maneira pela qual a informação orgânica - produzida internamente à organização, participa do processo decisório, mais especificamente no âmbito de cada modelo. Por último, a partir das inferências realizadas, propomos um novo modelo de tomada de decisão, cuja base de sustentação é a informação orgânica.

On Fuzzy Implication Classes - Towards Extensions of Fuzzy Rule-Based Systems

Atualmente, há diferentes definições de implicações fuzzy aceitas na literatura. Do ponto de vista teórico, esta falta de consenso demonstra que há discordâncias sobre o real significado de "implicação lógica" nos contextos Booleano e fuzzy. Do ponto de vista prático, isso gera dúvidas a respeito de quais "operadores de implicação" os engenheiros de software devem considerar para implementar um Sistema Baseado em Regras Fuzzy (SBRF). Uma escolha ruim destes operadores pode implicar em SBRF's com menor acurácia e menos apropriados aos seus domínios de aplicação. Uma forma de contornar esta situação e conhecer melhor os conectivos lógicos fuzzy. Para isso se faz necessário saber quais propriedades tais conectivos podem satisfazer. Portanto, a m de corroborar com o significado de implicação fuzzy e corroborar com a implementação de SBRF's mais apropriados, várias leis Booleanas têm sido generalizadas e estudadas como equações ou inequações nas lógicas fuzzy. Tais generalizações são chamadas de leis Boolean-like e elas não são comumente válidas em qualquer semântica fuzzy. Neste cenário, esta dissertação apresenta uma investigação sobre as condições suficientes e necessárias nas quais três leis Booleanlike like — y ≤ I(x, y), I(x, I(y, x)) = 1 e I(x, I(y, z)) = I(I(x, y), I(x, z)) — se mantém válidas no contexto fuzzy, considerando seis classes de implicações fuzzy e implicações geradas por automorfismos. Além disso, ainda no intuito de implementar SBRF's mais apropriados, propomos uma extensão para os mesmos

Molecular characterization and phylogenetic analysis of JussuMP-I: A RGD-P-III class hemorrhagic metalloprotease from Bothrops jararacussu snake venom

Snake venom metalloproteases (SVMPs) embody zinc-dependent multidomain enzymes responsible for a relevant pathophysiology in envenomation. including local and systemic hemorrhage. The molecular features responsible for hemorrhagic potency of SVMPs have been associated with their multidomains structures which can target these proteins them to several receptors of different tissues and cellular types. BjussuMP-I. a SVMP isolated from the Bothrops jararacussu venom, has been characterized as a P-III hemorrhagic metalloprotease. The complete cDNA sequence of BjussuMP-I with 1641bp encodes open reading frames of 547 amino acid residues, which conserve the common domains of P-III high molecular weight hemorrhagic metalloproteases: (i) pre-pro-peptide, (ii) metalloprotease, (iii) disintegrin-like and (iv) rich cysteine domain. BjussuMP-I induced lyses in fibrin clots and inhibited collagen- and ADP-induced platelet aggregation. We are reporting, for the first time, the primary structure of an RGD-P-III class snake venom metalloprotease. A phylogenetic analysis of the BjussuMP-1 metalloprotease/catalytic domain was performed to get new insights into the molecular evolution of the metalloproteases. A theoretical molecular model of this domain was built through folding recognition (threading) techniques and refined by molecular dynamics simulation. Then, the final BjussuMP-I catalytic domain model was compared to other SVMPs and Reprolysin family proteins in order to identify eventual structural differences, which could help to understand the biochemical activities of these enzymes. The presence of large hydrophobic areas and some conserved surface charge-positive residues were identified as important features of the SVMPs and other metalloproteases. (C) 2006 Elsevier B.V. All rights reserved.

Impacto das atividades de aqüicultura e sistemas de tratamento de efluentes com macrófitas aquáticas – relato de caso

Aquaculture effluents are enriched by nitrogen, phosphorus and organic matter and contribute to increase eutrophication of the receiving water bodies and reduction or change in biodiversity. To reduce effluent loading is important to formulate highly digestible diets with lower nutrient levels. In addition, it is necessary to treat effluents to attend to new legislation demands and the pressure of environmentalist. This review of the aquaculture activities and its impacts on the environmental is divided into fourth main subjects. The first is the way in which aquaculture affects the environmental through the consumption of materials and energy. The second is how aquaculture can affect the environmental directly, particularly through the effluents. The third is on the systems for treatment of aquaculture effluents with aquatic macrophytes. The fourth part is how aquaculture can be developed of sustainable form is on the systems for treatment of aquaculture effluents with aquatic macrophytes.

The X-ray crystallographic structure of Escherichia coli branching enzyme

Branching enzyme catalyzes the formation of alpha-1,6 branch points in either glycogen or starch. We report the 2.3-Angstrom crystal structure of glycogen branching enzyme from Escherichia coli. The enzyme consists of three major domains, an NH2-terminal seven-stranded beta-sandwich domain, a COOH-terminal domain, and a central alpha/beta-barrel domain containing the enzyme active site. While the central domain is similar to that of all the other amylase family enzymes, branching enzyme shares the structure of all three domains only with isoamylase. Oligosaccharide binding was modeled or branching enzyme using the enzyme-oligosaccharide complex structures of various alpha-amylases and cyclodextrin glucanotransferase and residues were implicated in oligosaccharide binding. While most of the oligosaccharides modeled well in the branching enzyme structure, an approximate 50degrees rotation between two of the glucose units was required to avoid steric clashes with Trp(298) of branching enzyme. A similar rotation was observed in the mammalian alpha-amylase structure caused by an equivalent tryptophan residue in this structure. It appears that there are two binding modes for oligosaccharides in these structures depending on the identity and location of this aromatic residue.

A note about the appearance of non-hyperbolic solutions in a mechanical pendulum system

The investigation of the behavior of a nonlinear system consists in the analysis of different stages of its motion, where the complexity varies with the proximity of a resonance region. Near this region the stability domain of the system undergoes sudden changes due basically to competition and interaction between periodic and saddle solutions inside the phase portrait, leading to the occurrence of the most different phenomena. Depending of the domain of the chosen control parameter, these events can reveal interesting geometric features of the system so that the phase portrait is not capable to express all them, since the projection of these solutions on the two-dimensional surface can hide some aspects of these events. In this work we will investigate the numerical solutions of a particular pendulum system close to a secondary resonance region, where we vary the control parameter in a restrict domain in order to draw a preliminary identification about what happens with this system. This domain includes the appearance of non-hyperbolic solutions where the basin of attraction in the center of the phase portrait diminishes considerably, almost disappearing, and afterwards its size increases with the direction of motion inverted. This phenomenon delimits a boundary between low and high frequency of the external excitation.

Ambient pH Controls Glycogen Levels by Regulating Glycogen Synthase Gene Expression in Neurospora crassa. New Insights into the pH Signaling Pathway

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

The effect of preparation method and Sb content on SnO2-CuO sintering

The sintering behavior of SnO2-CuO system has been investigated for two preparation methods and as a function of antimony concentration. A chemical preparation (Pechini's method) resulted in powders with smaller particle sizes than for a conventional oxide mixture. This led to smaller grain sizes in Pechini's method ceramics. The microstructures were heterogeneous in both systems, showing grain coarsening. The densification was aided by liquid phase formation, due to copper, in both systems, but the temperature of maximum shrinkage rate was larger for the Pechini's method ceramic because copper had to diffuse to the grain surface. Independently of the preparation method, antimony did not aid densification, and increasing its concentration led to a higher densification temperature and lower shrinkage rate. (C) 2003 Kluwer Academic Publishers.