989 resultados para Massive modularity
Resumo:
In recent years, massive protostars have turned out to be a possible population of high-energy emitters. Among the best candidates is IRAS 16547-4247, a protostar that presents a powerful outflow with clear signatures of interaction with its environment. This source has been revealed to be a potential high-energy source because it displays non-thermal radio emission of synchrotron origin, which is evidence of relativistic particles. To improve our understanding of IRAS 16547-4247 as a high-energy source, we analyzed XMM-Newton archival data and found that IRAS 16547-4247 is a hard X-ray source. We discuss these results in the context of a refined one-zone model and previous radio observations. From our study we find that it may be difficult to explain the X-ray emission as non-thermal radiation coming from the interaction region, but it might be produced by thermal Bremsstrahlung (plus photo-electric absorption) by a fast shock at the jet end. In the high-energy range, the source might be detectable by the present generation of Cherenkov telescopes, and may eventually be detected by Fermi in the GeV range.
Resumo:
Acute variceal bleeding (AVB) is a life-threatening complication in patients with cirrhosis. Hemostatic therapy of AVB includes early administration of vasoactive drugs that should be combined with endoscopic therapy, preferably banding ligation. However, failure to control bleeding or early rebleed within 5 days still occurs in 15-20% of patients with AVB. In these cases, a second endoscopic therapy may be attempted (mild bleeding in a hemodynamically stable patient) or we can use a balloon tamponade as a bridge to definitive derivative treatment (i.e., a transjugular intrahepatic portosystemic shunt). Esophageal balloon tamponade provides initial control in up to 80% of AVB, but it carries a high risk of major complications, especially in cases of long duration of tamponade (>24 h) and when tubes are inserted by inexperienced staff. Preliminary reports suggest that self-expandable covered esophageal metallic stents effectively control refractory AVB (i.e., ongoing bleeding despite pharmacological and endoscopic therapy or massive bleeding precluding endoscopic therapy) with a low incidence of complications. Thus, covered self-expanding metal stents may represent an alternative to the Sengstaken-Blakemore balloon for the temporary control of bleeding in treatment failures. Further studies are required to determine the role of this new device in AVB.
Resumo:
The finding that tissue δ15N values increase with protein catabolism has led researchers to apply this value to gauge nutritive condition in vertebrates. However, its application to marine mammals has in most occasions failed. We investigated the relationship between δ15N values and the fattening/fasting cycle in a model species, the fin whale, a migratory capital breeder that experiences severe seasonal variation in body condition. We analyzed two tissues providing complementary insights: one with isotopic turnover (muscle) and one that keeps a permanent record of variations in isotopic values (baleen plates). In both tissues δ15N values increased with intensive feeding but decreased with fasting, thus contradicting the pattern previously anticipated. The apparent inconsistency during fasting is explained by the fact that a) individuals migrate between different isotopic isoscapes, b) starvation may not trigger significant negative nitrogen balance, and c) excretion drops and elimination of 15N-depleted urine is minimized. Conversely, when intensive feeding is resumed in the northern grounds, protein anabolism and excretion start again, triggering 15N enrichment. It can be concluded that in whales and other mammals that accrue massive depots of lipids as energetic reserves and which have limited access to drinking water, the δ15N value is not affected by fasting and therefore cannot be used as an indicatior of nutritive condition.
Resumo:
Reusability has become more popular factor in modern software engineering. This is mainly because object-orientation has brought methods that allow reusing more easily. Today more and more application developer thinks how they can reuse already existing applications in their work. If the developer wants to use existing components outside the current project, he can use design patterns, class libraries or frameworks. These provide solution for specific or general problems that has been already encountered. Application frameworks are collection of classes that provides base for the developer. Application frameworks are mostly implementation phase tools, but can also be used in application design. The main purpose of the frameworks is separate domain specific functionalities from the application specific. Usually the frameworks are divided into two categories: black and white box. Difference between those categories is the way the reuse is done. The application frameworks provide properties that can be examined and compared between different frameworks. These properties are: extensibility, reusability, modularity and scalability. These examine how framework will handle different platforms, changes in framework, increasing demand for resources, etc. Generally application frameworks do have these properties in good level. When comparing general purpose framework and more specific purpose framework, the main difference can be located in reusability of frameworks. It is mainly because the framework designed to specific domain can have constraints from external systems and resources. With general purpose framework these are set by the application developed based on the framework.
Resumo:
Tobacco and alcohol are ordinary consumer goods that are still two overriding preventable causes of death in Switzerland. Massive advertising supports their selling and contributes to maintain a major public health problem up to date. The widely read free press represents an interesting advertising mean. The study of tobacco and alcohol advertisements published in the free newspaper 20 minutes through the year 2012 gives us a good idea of these products' advertising strategies. Compared to those for alcohol, the cigarette advertisements are more numerous, more suggestive and dealing with emotions. The themes proposed respond to young people's expectations in order to incline them to smoke, whereas positive images encourage to keep on smoking.
Resumo:
As the development of integrated circuit technology continues to follow Moore’s law the complexity of circuits increases exponentially. Traditional hardware description languages such as VHDL and Verilog are no longer powerful enough to cope with this level of complexity and do not provide facilities for hardware/software codesign. Languages such as SystemC are intended to solve these problems by combining the powerful expression of high level programming languages and hardware oriented facilities of hardware description languages. To fully replace older languages in the desing flow of digital systems SystemC should also be synthesizable. The devices required by modern high speed networks often share the same tight constraints for e.g. size, power consumption and price with embedded systems but have also very demanding real time and quality of service requirements that are difficult to satisfy with general purpose processors. Dedicated hardware blocks of an application specific instruction set processor are one way to combine fast processing speed, energy efficiency, flexibility and relatively low time-to-market. Common features can be identified in the network processing domain making it possible to develop specialized but configurable processor architectures. One such architecture is the TACO which is based on transport triggered architecture. The architecture offers a high degree of parallelism and modularity and greatly simplified instruction decoding. For this M.Sc.(Tech) thesis, a simulation environment for the TACO architecture was developed with SystemC 2.2 using an old version written with SystemC 1.0 as a starting point. The environment enables rapid design space exploration by providing facilities for hw/sw codesign and simulation and an extendable library of automatically configured reusable hardware blocks. Other topics that are covered are the differences between SystemC 1.0 and 2.2 from the viewpoint of hardware modeling, and compilation of a SystemC model into synthesizable VHDL with Celoxica Agility SystemC Compiler. A simulation model for a processor for TCP/IP packet validation was designed and tested as a test case for the environment.
Resumo:
INTRODUCTION: Electroencephalogram (EEG) background reactivity is a potentially interesting outcome predictor in comatose patients, especially after cardiac arrest, but recent studies report only fair interrater reliability. Furthermore, there are no definite guidelines for its testing. We therefore investigated the EEG effect of standardized noxious stimuli in comatose patients not reactive to auditory stimuli. METHODS: In this prospective study we applied a protocol using three different painful stimuli (bilateral nipple pinching, pinprick at the nose base, finger-nail compression on each side), grouped in three distinct clusters with an alternated sequence, during EEG recordings in comatose patients. We only analyzed recordings showing any reactivity to pain. Fisher and χ2 tests were used as needed to assess contingency tables. RESULTS: Of 42 studies, 12 did not show any background reactivity, 2 presented SIRPIDs, and 2 had massive artefacts; we thus analyzed 26 EEGs recorded in 17 patients (4 women, 24%). Nipple pinching more frequently induced a change in EEG background activity (p<0.001), with a sensitivity of 97.4% for reactivity. Neither the order of the stimuli in the cluster (p=0.723), nor the cluster order (p=0.901) influenced the results. CONCLUSION: In this pilot study, bilateral, synchronous nipple pinching seems to be the most efficient method to test nociceptive EEG reactivity in comatose patients. This approach may enhance interrater reliability, but deserves confirmation in larger cohorts.
Resumo:
Spain’s transport infrastructure policy has become a paradigmatic case of oversupply and of mismatch with demand. The massive expansion of the country’s transport infrastructure over the last decade has not been a response to demand bottlenecks or previously identified needs. For this reason, the intensity of use today on all interurban modes of transport in Spain falls well below that of other EU countries. This paper analyzes the institutional and regulatory factors that have permitted this policy, allowing us to draw lessons from the Spanish case that should help other countries avoid the pitfalls and shortcomings of Spanish policy.
Resumo:
Spain’s transport infrastructure policy has become a paradigmatic case of oversupply and of mismatch with demand. The massive expansion of the country’s transport infrastructure over the last decade has not been a response to demand bottlenecks or previously identified needs. For this reason, the intensity of use today on all interurban modes of transport in Spain falls well below that of other EU countries. This paper analyzes the institutional and regulatory factors that have permitted this policy, allowing us to draw lessons from the Spanish case that should help other countries avoid the pitfalls and shortcomings of Spanish policy.
Resumo:
Spain’s transport infrastructure policy has become a paradigmatic case of oversupply and of mismatch with demand. The massive expansion of the country’s transport infrastructure over the last decade has not been a response to demand bottlenecks or previously identified needs. For this reason, the intensity of use today on all interurban modes of transport in Spain falls well below that of other EU countries. This paper analyzes the institutional and regulatory factors that have permitted this policy, allowing us to draw lessons from the Spanish case that should help other countries avoid the pitfalls and shortcomings of Spanish policy. Based on our analysis, we also discuss policy remedies and suggest reforms in different regulatory areas, which could help improve the performance of Spain’s infrastructure policy.
Resumo:
The «La Pava» Au-Cu deposit is hosted by a vulcanosedimentary sequence, named Ocú Formation,developed in an island arc environment that resulted from the subduction of the Nazca Plate beneath the Caribbean Plate during the Cretaceous times. The deposit consists of disseminations and stockworks of pyrite and chalcopyrite accompanied by barite, quartz and carbonates. Three hydrothermal alteration zones have been recognized: silicic, argillic and propilityc, typical of gold-related high sulfidation systems. A supergenic alteration overprints the hydrothermal alterations developing a cap rich in silica and Feoxides. The detailed study of the Ocú Fm. indicates that the sulfides and the accompanying gold was formed in a submarine environment. Therefore we suggest that «La Pava» represents an Au-Cu hybrid deposit between high sulphidation epithermal and VMS types, which are found in volcanogenic massive sulphide environments.
Resumo:
During transapical transcatheter aortic valve replacement (TA-TAVR), the apical closure remains a challenge for the surgeon, having the risk for ventricular tear and massive bleeding. Apical closure devices are already under clinical evaluation, but only a few can lead to a full percutaneous TA-TAVR. We describe the successful use of a 9-mm myocardial occluder (ventricular septal defect occluder) that was used to seal the apex after a standard TA-TAVR (using the Sapien XT 23-mm transcatheter valve and the Ascendra + delivery system). The placement of the nonmodified myocardial occluder was performed through the Ascendra + delivery system, with a very small amount of blood loss and an acceptable sealing of the apical tear. This approach is feasible and represents a further step toward true-percutaneous transapical heart valve procedures. Modified apical occluders are under evaluation in animal models.
Resumo:
This article examines the position of US and European business in the debate about American direct investment in Western Europe in a historical perspective, from the establishment of the Common Market to the introduction of US regulation of foreign direct investment (FDI) a decade later. Based on abundant and diverse archival documents, it sheds new light on the process of Americanisation and contributes to existing research on transnational networks, by revealing the active role industrial leaders on both sides of the Atlantic played in shaping the political responses to problems raised by the American firms' massive presence in the Common Market.
Resumo:
The present work was undertaken to investigate, in young healthy volunteers, the relationships between the forward propagation times of arterial pressure waves and the timing of reflected waves observable on the aortic pulse, in the course of rapid changes in body position. 20 young healthy subjects, 10 men, and 10 women, were examined on a tilt table at two different tilt angles, -10° (Head-down) and + 45° (Head-up). In each position, carotid-femoral (Tcf) and carotid-tibial forward propagation times (Tct) were measured with the Complior device. In each position also, the central aortic pressure pulse was recorded with radial tonometry, using the SphygmoCor device and a generalized transfer function, so as to evaluate the timing of reflected waves reaching the aorta in systole (onset of systolic reflected wave, sT1r) and diastole (mean transit time of diastolic reflected wave, dMTT). The position shift from Head-up to Head-down caused a massive increase in both Tct (women from 130 ± 10 to 185 ± 18 msec P < 0.001, men from 136 ± 9 to 204 ± 18 msec P < 0.001) and dMTT (women from 364 ± 35 to 499 ± 33 msec P < 0.001, men from 406 ± 22 to 553 ± 21 msec P < 0.001). Mixed model regression showed that the changes in Tct and dMTT observed between Head-up and Head-down were tightly coupled (regression coefficient 2.1, 95% confidence interval 1.9-2.3, P < 0.001). These results strongly suggest that the diastolic waves observed on central aortic pulses reconstructed from radial tonometric correspond at least in part to reflections generated in the lower limbs.
Resumo:
The secondary thickening of plant organs in extant dicotyledons is a massive growth process that constitutes the major carbon sink in perennial, woody plants. Yet, our understanding of its molecular genetic control has been mostly obtained by its analysis in an herbaceous annual model, Arabidopsis. Recent years have seen increased interest in this somewhat under-researched topic, and various (non-)cell autonomous factors that guide the extent and vascular patterning of secondary growth have been identified. Concomitantly, a more detailed understanding of vascular differentiation processes has been obtained through analyses of primary growth, mostly in the root meristem. A future challenge will be the integration of these patterning and differentiation modules together with cambial activity into the 4-dimensional frame of secondary thickening.