Ruin Theory with Excess of Loss Reinsurance and Reinstatements

The present paper studies the probability of ruin of an insurer, if excess of loss reinsurance with reinstatements is applied. In the setting of the classical Cramer-Lundberg risk model, piecewise deterministic Markov processes are used to describe the free surplus process in this more general situation. It is shown that the finite-time ruin probability is both the solution of a partial integro-differential equation and the fixed point of a contractive integral operator. We exploit the latter representation to develop and implement a recursive algorithm for numerical approximation of the ruin probability that involves high-dimensional integration. Furthermore we study the behavior of the finite-time ruin probability under various levels of initial surplus and security loadings and compare the efficiency of the numerical algorithm with the computational alternative of stochastic simulation of the risk process. (C) 2011 Elsevier Inc. All rights reserved.

A territorial model of commuting in Catalonia, 1986-1996

Commuting consists in the fact that an important fraction of workers in developed countries do not reside close to their workplaces but at long distances from them, so they have to travel to their jobs and then back home daily. Although most workers hold a job in the same municipality where they live or in a neighbouring one, an important fraction of workers face long daily trips to get to their workplace and then back home.Even if we divide Catalonia (Spain) in small aggregations of municipalities, trying to make them as close to local labour markets as possible, we will find out that some of them have a positive commuting balance, attracting many workers from other areas and providing local jobs for almost all their resident workers. On the other side, other zones seem to be mostly residential, so an important fraction of their resident workers hold jobs in different local labour markets. Which variables influence an area¿s role as an attraction pole or a residential zone? In previous papers (Artís et al, 1998a, 2000; Romaní, 1999) we have brought out the main individual variables that influence commuting by analysing a sample of Catalan workers and their commuting decisions. In this paper we perform an analysis of the territorial variables that influence commuting, using data for aggregate commuting flows in Catalonia from the 1991 and 1996 Spanish Population Censuses.These variables influence commuting in two different ways: a zone with a dense, welldeveloped economical structure will have a high density of jobs. Work demand cannot be fulfilled with resident workers, so it spills over local boundaries. On the other side, this economical activity has a series of side-effects like pollution, congestion or high land prices which make these areas less desirable to live in. Workers who can afford it may prefer to live in less populated, less congested zones, where they can find cheaper land, larger homes and a better quality of life. The penalty of this decision is an increased commuting time. Our aim in this paper is to highlight the influence of local economical structure and amenities endowment in the workplace-residence location decision. A place-to-place logit commuting models is estimated for 1991 and 1996 in order to find the economical and amenities variables with higher influence in commuting decisions. From these models, we can outline a first approximation to the evolution of these variables in the 1986-1996 period. Data have been obtained from aggregate flow travel-matrix from the 1986, 1991 and 1996 Spanish Population Censuses

Algunes reflexions sobre la construcció d'indicadors indirectes pel seguiment de l'activitat industrial regional

En un gran nombre d'economies, l'evolució de la producció industrial s'analitza a partir de la informació sobre el Producte Industrial Brut i/o el Valor Afegit Brut que proporcionen les Comptabilitats Nacionals. A Espanya, la utilització d'aquestes dades presenta el problema que no estan disponibles tan ràpidament com seria desitjable. En conseqüència, no és possible realitzar un seguiment a curt termini de l'activitat industrial a partir dels mateixos. Per a solucionar aquest problema, l'Institut Nacional d'Estadística elabora un Índex de Producció Industrial mensual a partir de la informació obtinguda a través d'una enquesta dirigida a una mostra representativa de les empreses espanyoles. No obstant això, a nivell regional, les dificultats per a realitzar un seguiment de l'activitat industrial són majors a causa de l'escassesa d'informació estadística. Durant els últims anys, diferents institucions públiques i privades han començat a elaborar indicadors d'activitat per a algunes regions espanyoles, encara que a partir de metodologies no homogènies, de manera que aquests índexs no són directament comparables. Per a corregir aquesta situació, en diferents fòrums s'ha proposat emprar la metodologia utilitzada per l'Institut d'Estadística de Catalunya (IEC) per a la comunitat catalana com alternativa per a aquelles comunitats espanyoles que no disposen d'un indicador de l'activitat industrial, atès que per a Catalunya resulta una metodologia adequada. En aquest treball s'estudia la idoneïtat d'estendre aquesta metodologia a la resta de regions espanyoles. Per a això, es construeixen uns indicadors d'acord amb la metodologia del IEC i es comparen amb els índexs regionals obtinguts per mètodes directes per a tres de les quatre regions que existeixen: Andalusia, Astúries i Euskadi

On the consequences of misspecifing assumptions concerning residuals distribution in a repeated measures and nonlinear mixed modelling context

In this paper we describe the results of a simulation study performed to elucidate the robustness of the Lindstrom and Bates (1990) approximation method under non-normality of the residuals, under different situations. Concerning the fixed effects, the observed coverage probabilities and the true bias and mean square error values, show that some aspects of this inferential approach are not completely reliable. When the true distribution of the residuals is asymmetrical, the true coverage is markedly lower than the nominal one. The best results are obtained for the skew normal distribution, and not for the normal distribution. On the other hand, the results are partially reversed concerning the random effects. Soybean genotypes data are used to illustrate the methods and to motivate the simulation scenarios

Bulk-plasmon dispersion relations in metals

Using an extended-random-phase-approximation sum-rule technique, we have investigated the bulk-plasmon dispersion relation, incorporating in a simple way exchange and correlation effects within the jellium model. The results obtained are compared with recent experimental findings. The key role played by exchange and correlation effects in improving the agreement between theory and experiment is stressed. The static polarizability has also been calculated as a function of q. The formulas can be easily modified to incorporate band-structure effects (through an intraband electron effective mass) and core-polarization effects (through a static dielectric constant).

Static dipole polarizability of alkali-metal clusters: Electronic exchange and correlation effects

Nonlocal approximations for the electronic exchange and correlation effects are used to compute, within density-functional theory, the polarizability and surface-plasma frequencies of small jelliumlike alkali-metal clusters. The results are compared with those obtained using the local-density approximation and with available experimental data, showing the relevance of these effects in obtaining an accurate description of the surface response of metallic clusters.

Multipole surface-plasmon modes on simple metals

The average multipole surface-plasmon energy for simple metals, as well as that of ordinary surface and bulk plasmons, is obtained using energy-weighted moments of the electronic response to sufficiently general external perturbations. A local approximation of exchange and correlation effects is used within a jellium model. Band-structure effects are incorporated through an effective electronic mass. Taking advantage of the transparency of the method, we analyze under what circumstances such modes might be observable. It is shown that due to an interplay between Coulomb and kinetic energies, the multipole modes become unobservable for increasing values of the transferred momentum (q) parallel to the surface. The value of q at which the multipole mode becomes unobservable is much smaller than the cutoff value for Landau damping. The effect of the electronic surface diffuseness is also analyzed. We compare our results with previous density-functional calculations and with recent experimental data for Na, K, and Cs.

Effective one-dimensional square well for two-dimensional quantum wires

The symmetrical two-dimensional quantum wire with two straight leads joined to an arbitrarily shaped interior cavity is studied with emphasis on the single-mode approximation. It is found that for both transmission and bound-state problems the solution is equivalent to that for an energy-dependent one-dimensional square well. Quantum wires with a circular bend, and with single and double right-angle bends, are examined as examples. We also indicate a possible way to detect bound states in a double bend based on the experimental setup of Wu et al.

Systematic trends in self-consistent calculations of linear quantum wires

Systematic trends in the properties of a linear split-gate heterojunction are studied by solving iteratively the Poisson and Schrödinger equations for different gate potentials and temperatures. A two-dimensional approximation is presented that is much simpler in the numerical implementation and that accurately reproduces all significant trends. In deriving this approximation, we provide a rigorous and quantitative basis for the formulation of models that assumes a two-dimensional character for the electron gas at the junction.

Systematics of properties of the electron gas in deep-etched quantum wires

An efficient method is developed for an iterative solution of the Poisson and Schro¿dinger equations, which allows systematic studies of the properties of the electron gas in linear deep-etched quantum wires. A much simpler two-dimensional (2D) approximation is developed that accurately reproduces the results of the 3D calculations. A 2D Thomas-Fermi approximation is then derived, and shown to give a good account of average properties. Further, we prove that an analytic form due to Shikin et al. is a good approximation to the electron density given by the self-consistent methods.

Density modes in spherical 4He shells

We compute the density-fluctuation spectrum of spherical 4HeN shells adsorbed on the outer surface of Cn fullerenes. The excitation spectrum is obtained within the random-phase approximation, with particle-hole elementary excitations and effective interaction extracted from a density-functional description of the shell structure. The presence of one or two solid helium layers adjacent to the adsorbing fullerene is phenomenologically accounted for. We illustrate our results for a selection of numbers of adsorbed atoms on C20, C60, and C120. The hydrodynamical model that has proven successful to describe helium excitations in the bulk and in restricted geometries permits to perform a rather exhaustive analysis of various fluid spherical systems, namely, spheres, cavities, free bubbles, and bound shells of variable size.

Electronic structure of few-electron concentric double quantum rings

The ground state structure of few-electron concentric double quantum rings is investigated within the local spin density approximation. Signatures of inter-ring coupling in the addition energy spectrum are identified and discussed. We show that the electronic configurations in these structures can be greatly modulated by the inter-ring distance: At short and long distances the low-lying electron states localize in the inner and outer rings, respectively, and the energy structure is essentially that of an isolated single quantum ring. However, at intermediate distances the electron states localized in the inner and the outer ring become quasidegenerate and a rather entangled, strongly-correlated system is formed.

Exchange-correlation effects on quantum wires with spin-orbit interactions under the influence of in-plane magnetic fields.

Within the noncollinear local spin-density approximation, we have studied the ground state structure of a parabolically confined quantum wire submitted to an in-plane magnetic field, including both Rashba and Dresselhaus spin-orbit interactions. We have explored a wide range of linear electronic densities in the weak (strong) coupling regimes that appear when the ratio of spin-orbit to confining energy is small (large). These results are used to obtain the conductance of the wire. In the strong coupling limit, the interplay between the applied magnetic field¿irrespective of the in-plane direction, the exchange-correlation energy, and the spin-orbit energy-produces anomalous plateaus in the conductance vs linear density plots that are otherwise absent, or washes out plateaus that appear when the exchange-correlation energy is not taken into account.

Deformed-jellium model for the fission of multiply charged metal clusters

A deformed-jellium model is used to calculate the fission barrier height of positive doubly charged sodium clusters within an extended Thomas-Fermi approximation. The fissioning cluster is continuously deformed from the parent configuration until it splits into two fragments. Although the shape of the fission barrier obviously depends on the parametrization of the fission path, we have found that remarkably, the maximum of the barrier corresponds to a configuration in which the emerging fragments are already formed and rather well apart. The implication of this finding in the calculation of critical numbers for fission is illustrated in the case of multiply charged Na clusters.

Momentum distribution in nuclear matter and finite nuclei

A simple method is presented to evaluate the effects of short-range correlations on the momentum distribution of nucleons in nuclear matter within the framework of the Greens function approach. The method provides a very efficient representation of the single-particle Greens function for a correlated system. The reliability of this method is established by comparing its results to those obtained in more elaborate calculations. The sensitivity of the momentum distribution on the nucleon-nucleon interaction and the nuclear density is studied. The momentum distributions of nucleons in finite nuclei are derived from those in nuclear matter using a local-density approximation. These results are compared to those obtained directly for light nuclei like 16O.