Personal data usage management

Personal data about users (customers) is a key component for enterprises and large organizations. Its correct analysis and processing can produce relevant knowledge to achieve different business goals. For example, the monetisation of this data has become a valuable asset for many companies, such as Google, Facebook or Twitter, that obtain huge profits mainly from targeted advertising.

Biomass Gasification in a Fluidized Bed Reactor: Effect of Temperature, Stoichiometric Ratio and Biomass Type

This paper investigates the gasification of two biomass types (pine wood and olive stones) in a laboratory scale bubbling fluidized bed reactor, in order to evaluate comparatively their potential in the production of syngas.

Doctrina christiana para la enseñanza publica [Texto impreso]

Esc. real en A2

Biblia. A.T. Español

Texto a dos col.

Biblia. A.T. Español

Texto a dos col.

Biblia. A.T. Español

Texto a dos col.

Biblia. A.T. Español

Texto a dos col

Modelado de un sistema de telemetría LIDAR CW-RM

Los sistemas LIDAR (Light Detection and Ranging) permiten medir la distancia entre dos puntos, evaluando el tiempo que tarda una señal óptica (generalmente procedente de un Láser) en hacer un recorrido de ida y vuelta entre dichos puntos. En los sistemas CW-RM (Continuous Wave - Random Modulated) esta evaluación se hace calculando la correlación entre la señal emitida (pseudoaleatoria) y la recibida (cuyo retardo depender de la distancia entre los puntos). Este sistema CW-RM tiene la ventaja sobre los TOF (Time Of Flight) de que funcionan bien ún con señales recibidas de reducida relación señal a ruido. La precisión de la medida, depende, entre otros parámetros, del tiempo de bit de la secuencia pseudoaleatoria y de la frecuencia de muestreo del sistema que capta las señales y posteriormente las correla. El objetivo del presente trabajo es realizar un sistema de gran precisión, utilizando señales pseudoaleatorias de tiempo de bit de centenas de pico segundo y frecuencia de muestreo de Gs/s, para lo que deberemos utilizar equipamiento disponible en laboratorio, as mismo deberemos seleccionar y con guiar los láseres emisores para que puedan trabajar a estas velocidades. La primera etapa del proyecto será el conocimiento del instrumental de laboratorio que vamos a utilizar en el set-up. La segunda etapa será la realización de un primer montaje en el que se conectará emisor y receptor a través de una fibra óptica de longitud conocida. Esto nos permitir á el desarrollo de algoritmos para extraer información de la medida y para una calibración del instrumental para posteriores medidas. La tercera etapa es el diseño definitivo con emisor al aire para el que tendremos que ajustar todos los elementos ópticos del sistema, de modo que se pueda detectar la luz reflejada y además se pueda reducir parte de la luz de background.

Biblia. A.T. Español

Texto a dos col.

Biblia. A.T. Español

Índice

Biblia. N.T. Español

Texto a dos col

Life cycle assessment of concentrated solar power (CSP) and the influence of hybridising with natural gas

Purpose Concentrating Solar Power (CSP) plants based on parabolic troughs utilize auxiliary fuels (usually natural gas) to facilitate start-up operations, avoid freezing of HTF and increase power output. This practice has a significant effect on the environmental performance of the technology. The aim of this paper is to quantify the sustainability of CSP and to analyse how this is affected by hybridisation with different natural gas (NG) inputs. Methods A complete Life Cycle (LC) inventory was gathered for a commercial wet-cooled 50 MWe CSP plant based on parabolic troughs. A sensitivity analysis was conducted to evaluate the environmental performance of the plant operating with different NG inputs (between 0 and 35% of gross electricity generation). ReCiPe Europe (H) was used as LCA methodology. CML 2 baseline 2000 World and ReCiPe Europe E were used for comparative purposes. Cumulative Energy Demands (CED) and Energy Payback Times (EPT) were also determined for each scenario. Results and discussion Operation of CSP using solar energy only produced the following environmental profile: climate change 26.6 kg CO2 eq/KWh, human toxicity 13.1 kg 1,4-DB eq/KWh, marine ecotoxicity 276 g 1,4-DB eq/KWh, natural land transformation 0.005 m2/KWh, eutrophication 10.1 g P eq/KWh, acidification 166 g SO2 eq/KWh. Most of these impacts are associated with extraction of raw materials and manufacturing of plant components. The utilization NG transformed the environmental profile of the technology, placing increasing weight on impacts related to its operation and maintenance. Significantly higher impacts were observed on categories like climate change (311 kg CO2 eq/MWh when using 35 % NG), natural land transformation, terrestrial acidification and fossil depletion. Despite its fossil nature, the use of NG had a beneficial effect on other impact categories (human and marine toxicity, freshwater eutrophication and natural land transformation) due to the higher electricity output achieved. The overall environmental performance of CSP significantly deteriorated with the use of NG (single score 3.52 pt in solar only operation compared to 36.1 pt when using 35 % NG). Other sustainability parameters like EPT and CED also increased substantially as a result of higher NG inputs. Quasilinear second-degree polynomial relationships were calculated between various environmental performance parameters and NG contributions. Conclusions Energy input from auxiliary NG determines the environmental profile of the CSP plant. Aggregated analysis shows a deleterious effect on the overall environmental performance of the technology as a result of NG utilization. This is due primarily to higher impacts on environmental categories like climate change, natural land transformation, fossil fuel depletion and terrestrial acidification. NG may be used in a more sustainable and cost-effective manner in combined cycle power plants, which achieve higher energy conversion efficiencies.

Environmental analysis of a Concentrated Solar Power (CSP) plant hybridised with different fossil and renewable fuels

The environmental performance of a 50 MW parabolic trough Concentrated Solar Power (CSP) plant hybridised with different fuels was determined using a Life Cycle Assessment methodology. Six different scenarios were investigated, half of which involved hybridisation with fossil fuels (natural gas, coal and fuel oil), and the other three involved hybridisation with renewable fuels (wheat straw, wood pellets and biogas). Each scenario was compared to a solar-only operation. Nine different environmental categories as well as the Cumulative Energy Demand and the Energy Payback Time (EPT) were evaluated using Simapro software for 1 MWh of electricity produced. The results indicate a worse environmental performance for a CSP plant producing 12% of the electricity from fuel than in a solar-only operation for every indicator, except for the eutrophication and toxicity categories, whose results for the natural gas scenario are slightly better. In the climate change category, the results ranged between 26.9 and 187 kg CO2 eq/MWh, where a solar-only operation had the best results and coal hybridisation had the worst. Considering a weighted single score indicator, the environmental impact of the renewable fuels scenarios is approximately half of those considered in fossil fuels, with the straw scenario showing the best results, and the coal scenario the worstones. EPT for solar-only mode is 1.44 years, while hybridisation scenarios EPT vary in a range of 1.72 -1.83 years for straw and pellets respectively. The fuels with more embodied energy are biomethane and wood pellets.

Hybridizing concentrated solar power (CSP) with biogas and biomethane as an alternative to natural gas: Analysis of environmental performance using LCA

Concentrating Solar Power (CSP) plants typically incorporate one or various auxiliary boilers operating in parallel to the solar field to facilitate start up operations, provide system stability, avoid freezing of heat transfer fluid (HTF) and increase generation capacity. The environmental performance of these plants is highly influenced by the energy input and the type of auxiliary fuel, which in most cases is natural gas (NG). Replacing the NG with biogas or biomethane (BM) in commercial CSP installations is being considered as a means to produce electricity that is fully renewable and free from fossil inputs. Despite their renewable nature, the use of these biofuels also generates environmental impacts that need to be adequately identified and quantified. This paper investigates the environmental performance of a commercial wet-cooled parabolic trough 50 MWe CSP plant in Spain operating according to two strategies: solar-only, with minimum technically viable energy non-solar contribution; and hybrid operation, where 12 % of the electricity derives from auxiliary fuels (as permitted by Spanish legislation). The analysis was based on standard Life Cycle Assessment (LCA) methodology (ISO 14040-14040). The technical viability and the environmental profile of operating the CSP plant with different auxiliary fuels was evaluated, including: NG; biogas from an adjacent plant; and BM withdrawn from the gas network. The effect of using different substrates (biowaste, sewage sludge, grass and a mix of biowaste with animal manure) for the production of the biofuels was also investigated. The results showed that NG is responsible for most of the environmental damage associated with the operation of the plant in hybrid mode. Replacing NG with biogas resulted in a significant improvement of the environmental performance of the installation, primarily due to reduced impact in the following categories: natural land transformation, depletion of fossil resources, and climate change. However, despite the renewable nature of the biofuels, other environmental categories like human toxicity, eutrophication, acidification and marine ecotoxicity scored higher when using biogas and BM.

Approaching unbanked people: a person-to-person payment application on Facebook

More than 2.5 billion people are still unbanked and they do not access or use financial services. In this paper, we present an innovative service that allows Santander University Smart Card holders to make person-to-person payments to their friends, using different social channels, such as Telegram, Facebook or Twitter. Our first implementation is based on Facebook, one of the most used social networks. This approach allows the service to reach a great number of potential users but the delivery and stability of the service depends on an external provider. We include the description of the service architecture, its implementation, tests, and the lessons learned from the development. We also discuss pros and cons of the third party service dependency from the technical and business viewpoints.