Projecto de hardware digital orientado por objectos

Os limites entre os domínios do software e do hardware são cada vez mais ténues, pelo que técnicas inicialmente experimentadas no software têm vindo a ser gradualmente aplicadas no hardware. Este artigo pretende descrever o estado actual da utilização da tecnologia de programação orientada por objectos no projecto de hardware digital. São analisadas as vantagens e implicações quando se introduzem conceitos ligados à tecnologia orientada por objectos em projectos de hardware e é apresentado um exemplo utilizando uma das extensões orientadas por objectos da linguagem VHDL.

O contributo da narrativa digital para o desenvolvimento da fala num caso de Rubinstein-Taybi: estudo de caso

Dissertação de mestrado em Ciências da Educação (área de especialização em Tecnologia Educativa)

Self-reported psychosocial factors among In Vitro Fertilization patients interviewed alone or with the partner

"Published online: 07 Nov 2015"

Self-perception and dissatisfaction with weight does not depend on the frequency of physical activity

OBJECTIVE: To evaluate the level of satisfaction with body weight and the self-perception of the weight/height ratio and to verify the influence of the frequency of present and past physical activity on these variables. METHODS: Using questionnaires or interviews, we obtained height data, reported and desired weight, self-perception of the weight/height ratio, and the frequency of current physical activity in 844 adults (489 women). Of these, evaluated the frequency of physical activity during high school of 193 individuals,and we measured their height and weight. RESULTS: Less than 2/3 of the individuals had body mass index between 20 and 24.9 kg/m2. A tendency existed to overestimate height by less than 1 cm and to underestimate weight by less than 1kg. Desired weight was less than that reported (p<0.001), and only 20% were satisfied with their current weight. Only 42% of men and 25% of women exercised regularly. No association was found between the frequency of physical activity and the variables height, weight, and body mass index, and the level of satisfaction with current weight. CONCLUSION: Height and weight reported seem to be valid for epidemological studies, and great dissatisfaction with body weight and a distorted self-perception of height/weight ratio exists, especially in women, regardless of the frequency of physical activity.

Optimización de Arquitecturas de Procesamiento Digital de Señales en Lógica Programable para Aplicaciones en Vuelos No Tripulados

En dispositivos electrónicos de última generación destinados a funciones de comunicación o control automático, los algoritmos de procesamiento digital de señales trasladados al hardware han ocupado un lugar fundamental. Es decir el estado de arte en el área de las comunicaciones y control puede resumirse en algoritmos basados en procesamiento digital de señales. Las implementaciones digitales de estos algoritmos han sido estudiadas en áreas de la informática desde hace tiempo. Sin embargo, aunque el incremento en la complejidad de los algoritmos modernos permite alcanzar desempeños atractivos en aplicaciones específicas, a su vez impone restricciones en la velocidad de operación que han motivado el diseño directamente en hardware de arquitecturas para alto rendimiento. En este contexto, los circuitos electrónicos basados en lógica programable, principalmente los basados en FPGA (Field-Programmable Gate Array), permiten obtener medidas de desempeño altamente confiables que proporcionan el acercamiento necesario hacia el diseño electrónico de circuitos para aplicaciones específicas “ASIC-VLSI” (Application Specific Integrated Circuit - Very Large Scale Integration). En este proyecto se analiza el diseño y la implementación de aquitecturas electrónicas para el procesamiento digital de señales, con el objeto de obtener medidas reales sobre el comportamiento del canal inalámbrico y su influencia sobre la estimación y el control de trayectoria en vehículos aéreos no tripulados (UAV, Unmanned Aerial Vehicle). Para esto se propone analizar un dispositivo híbrido basado en microcontroladores y circuitos FPGA y sobre este mismo dispositivo implementar mediante algoritmo un control de trayectoria que permita mantener un punto fijo en el centro del cuadro de una cámara de video a bordo de un UAV, que sea eficiente en términos de velocidad de operación, dimensiones y consumo de energía.

Validade de um monitor digital de pulso para mensuração de pressão arterial em comparação com um esfigmomanômetro de mercúrio

FUNDAMENTO: Medidas válidas da pressão arterial, em situações clínicas e na comunidade, são essenciais para a monitoração dessa variável em nível populacional. OBJETIVO: Avaliar a validade de um monitor digital de pulso para mensuração da pressão arterial em adolescentes, em comparação com um esfigmomanômetro de mercúrio. MÉTODOS: Um estudo de validação foi realizado na cidade de Pelotas, região sul do Brasil. A pressão arterial foi medida duas vezes, utilizando-se dois esfigmomanômetros diferentes: um aparelho digital de pulso OMRON e um aparelho de mesa BD de mercúrio. Metade da amostra foi medida primeiro através do manômetro digital e depois pelo de mercúrio, enquanto a outra metade foi avaliada na ordem inversa. A concordância entre as duas medidas foi avaliada através do método de Bland & Altman. RESULTADOS: 120 adolescentes com idade entre 14 e 15 anos foram incluídos no estudo (50% de cada sexo). A pressão sistólica média entre os meninos foi de 113,7 mmHg (DP 14,2) usando o manômetro de mercúrio e 115,5 mmHg (DP 15,2) usando o aparelho digital. Os valores equivalentes para a pressão diastólica foram 61,5 mmHg (DP 9,9) e 69,6 mmHg (10,2), respectivamente. Entre as meninas, a pressão sistólica média foi de 104,7 mmHg (DP 10,1) usando o manômetro de mercúrio e 102,4 mmHg (DP 11.9) usando o aparelho digital. Os valores equivalentes para a pressão diastólica foram 60,0 mmHg (DP 10,4) e 65,7 mmHg (DP 7,7), respectivamente. CONCLUSÕES: O manômetro digital apresentou alta concordância com o manômetro de mercúrio para medir a pressão arterial sistólica. A concordância foi menor para a pressão arterial diastólica. O uso de equações de correção pode ser uma alternativa para estudos utilizando esse monitor digital de pulso em adolescentes.

Development of a semi-automatic self learning pattern recognition system for the control of electronic boards

This project was funded under the Applied Research Grants Scheme administered by Enterprise Ireland. The project was a partnership between Galway - Mayo Institute of Technology and an industrial company, Tyco/Mallinckrodt Galway. The project aimed to develop a semi - automatic, self - learning pattern recognition system capable of detecting defects on the printed circuits boards such as component vacancy, component misalignment, component orientation, component error, and component weld. The research was conducted in three directions: image acquisition, image filtering/recognition and software development. Image acquisition studied the process of forming and digitizing images and some fundamental aspects regarding the human visual perception. The importance of choosing the right camera and illumination system for a certain type of problem has been highlighted. Probably the most important step towards image recognition is image filtering, The filters are used to correct and enhance images in order to prepare them for recognition. Convolution, histogram equalisation, filters based on Boolean mathematics, noise reduction, edge detection, geometrical filters, cross-correlation filters and image compression are some examples of the filters that have been studied and successfully implemented in the software application. The software application developed during the research is customized in order to meet the requirements of the industrial partner. The application is able to analyze pictures, perform the filtering, build libraries, process images and generate log files. It incorporates most of the filters studied and together with the illumination system and the camera it provides a fully integrated framework able to analyze defects on printed circuit boards.

Investigation into the potential for establishing a self-sustainable wetland ecosystem over pyritic mine tailings

Research was conducted to investigate the potential for ecologically engineering a sustainable wetland ecosystem over pyritic mine tailings to prevent the generation of acid mine drainage. Ecological engineering is technology with the primary goal being the creation of self-sustainable ecological systems. Work involved the design and construction of a pilot-scale wetland system comprising three wetland cells, each covering 100 m2. Approximately forty tonnes of pyritic mine tailings were deposited on the base of the first cell above a synthetic liner, covered with peat, flooded and planted with emergent wetland macrophytes Typha latifolia, Phragmites australis, and Juncus effusus. The second cell was constructed as a conventional free water surface wetland, planted identically, and used as a reference wetland/experimental control. Wetland monitoring to determine long-term sustainability focused on indicators of ecosystem health including ecological, hydrological, physico-chemical, geochemical, and biotic metrics. An integrated assessment was conducted that involved field ecology in addition to ecological risk assessment. The objective of the field ecology study was to use vegetative parameters as ecological indicators for documenting wetlands success or degradation. The goal of the risk assessment was to determine if heavy-metal contamination of the wetland sediments occurred through metal mobilisation from the underlying tailings, and to evaluate if subsequent water column chemistry and biotic metal concentrations were significantly correlated with adverse wetland ecosystem impacts. Data were used to assess heavy metal bioavailability within the system as a function of metal speciation in the wetland sediments. Results indicate hydrology is the most important variable in the design and establishment of the tailings wetland and suggest a wetland cover is an ecologically viable alternative for pyritic tailings which are feasible to flood. Ecological data indicate that in terms of species richness and diversity, the tailings-wetland was exhibiting the ecological characteristics of natural wetlands within two years. Ata indicate that pH and conductivity in the tailings-wetland were not adversely impacted by the acid-generating potential or sulphate concentration of the tailings substrate and its porewater. Similarly, no enhanced seasonal impacts from sulphate or metals in the water column, nor adverse impacts on the final water quality of the outflows, were detected. Mean total metal concentrations in the sediments of the tailings-wetland indicate no significant adverse mobilisation of metals into the peat substrate from the tailings. Correlation analyses indicate a general increase in sediment metal concentration in this wetland with increasing water depth and pH, and a corresponding decrease in the metal concentrations of the water column. Sediment extractions also showed enrichment of Cd, Fe, Pb and Zn in the oxidisable fraction (including sulphides and organic matter) of the tailings-wetland sediments. These data suggest that adsorption and coprecipitation of metals is occurring from the water column of the tailings wetland with organic material at increasing depths under reducing conditions. The long-term control of metal bioavailability in the tailings wetland will likely be related to the presence and continual build-up of organic carbon binding sites in the developing wetland above the tailings. Metal speciation including free-metal ion concentration and the impact of physico-chemical parameters particularly pH and organic matter, were investigated to assess ecotoxicological risk. Results indicate that potentially bioavailable metals (the sum of the exchangeable and reducible fractions) within the tailings wetland are similar to values cited for natural wetlands. Estimated free-metal ion concentrations calculated from geochemical regression models indicate lower free-metal ion concentrations of Cd in the tailings wetland than natural wetlands and slightly higher free-metal ion concentrations of Pb and Zn. Increased concentrations of metals in roots, rhizomes and stems of emergent macrophytes did not occur in the tailings wetland. Even though a substantial number of Typha latifolia plants were found rooting directly into tailings, elevated metals were not found in these plant tissues. Phragmites also did not exhibit elevated metal concentrations in any plant tissues. Typha and Phragmites populations appear to be exhibiting metal-tolerant behaviour. The chemistry of the water column and sediments in Silvermines wetland were also investigated and were much more indicative of a wetland system impacted by heavy metal contamination than the tailings-wetland. Mean Dc, Fe, Mn, Pb and Zn concentrations in the water column and sediments of Silvermines wetlands were substantially higher than in the pilot wetlands and closely approximate concentrations in these matrices contaminated with metals from mining. In addition, mean sulphate concentration in Silvermines wetland was substantially higher and is closer to sulphate concentrations in waters associated with mining. Potentially bioavailable metals were substantially elevated in Silvermines wetland in comparison to the pilot wetlands and higher than those calculated for natural rive sediments. However, Fe oxy-hydroxide concentrations in Silvermines sediments are also much higher than in the pilot wetlands and this significantly impacts the concentration of free-metal ions in the sediment porewater. The free-metal ion concentrations for Pb and Zn indicate that Silvermines wetland is retaining metals and acting as a treatment wetland for drainage emanating from Silvermines tailings dam.

Estetoscópio digital como ferramenta inovadora no ensino da ausculta cardíaca

O exame físico cardiovascular, em particular a ausculta cardíaca, é uma das habilidades clínicas mais difíceis para os alunos durante seu treinamento médico. Estudos sugerem que o uso de tecnologias, como o estetoscópio digital, aumente a acurácia do exame clínico, entretanto, seu impacto no ensino da propedêutica da ausculta cardíaca em alunos de graduação de Medicina não é conhecido. O objetivo é demonstrar a utilidade do estetoscópio digital, em comparação com métodos tradicionais, como instrumento de ensino da ausculta cardíaca. Estudo de intervenção, longitudinal, controlado, unicêntrico e randomizado. Foram inscritos 38 alunos de medicina para um curso de semiologia cardiovascular com duração de oito semanas. Definiu-se um programa com aulas expositivas e à beira do leito nas enfermarias de Cardiologia. Nas aulas práticas, os alunos foram randomizados em dois grupos: 1) (n = 21) estetoscópio digital (Littmann® modelo 3200, 3M); e 2) (n = 17) estetoscópios convencionais. Foi realizada uma avaliação pré-treinamento, através de um teste utilizando o software Heart Sounds®, que foi repetida ao final do curso. As médias das avaliações foram comparadas pelo teste T pareado e não pareado. Observa-se que, ao final do curso, houve uma melhora significativamente maior no grupo que utilizou o estetoscópio digital (51,9%) quando comparado ao grupo que utilizou o estetoscópio convencional (29,5%). Intervenções de curta duração para o ensino de semiologia cardíaca são capazes de contribuir de modo significativo para melhora da proficiência da identificação dos sons cardíacos. O uso do estetoscópio digital demonstrou ser um fator positivo no ensino dessas habilidades.

Digital gesteuerte Stromquellen für das Lichtbogenschweißen

Digital control, power source, arc welding, process control, information management, transient behaviour, thermal impedance, simulation, duty cycle, system design

Extremal self-dual codes

Magdeburg, Univ., Fak. für Mathematik, Diss., 2012

Determination of inorganic arsenic in rice using the Wagtech Digital Arsenator

[s.c.]

Assessment of the VoIP Transmission Quality over Digital Power Line Carrier Channels

This article is devoted to the research of VoIP transmission quality over Digital Power Line Carrier channels. Assessment of quality transmission is performed using E-model. Paper considers the possibility of joint using of Digital Power Line carrier equipment with different architecture in one network. As a result of the research, the rule for constructing of multi-segment Digital Power Line Carrier channels was formulated. This rule allows minimizing the transmission delay and saving frequency resources of high voltage Power Line Carrier range.