Electrocardiographic evaluation of the degree of sedation and the isolated use of methadone in healthy dogs

Objective: The present study aimed to investigate the influence of methadone on cardiorespiratory parameters, electrocardiogram and clinical sedation in dogs. Further possible side effects are reported.Study designProspective experimental cross-over study.DogsEight, 1-4-year-old, various breeds of dogs of both genders weighing 9-36kg.MethodsEach dog was treated three times: methadone 0.3mgkg(-1) (M0.3), 0.5mgkg(-1) (M0.5) and 1.0mgkg(-1) (M1.0) intramuscularly. Respiratory rate, heart rate and arterial blood pressure were recorded as well as electrocardiographic evaluation of lead II. Clinical sedation in each treatment received a score (0-3) after drug administration and at 30minute intervals until scores and measurements returned to baseline values.ResultsA significant decrease in heart rate was seen with each dose of methadone and bradycardia (HR<60bpm) was noted in a few dogs at each dose. A clinically significant arrhythmia occurred in one dog at 1mgkg(-1) that required reversal with butorphanol. There was no significant difference in SAP, MAP and DAP between treatments. Some side effects such as salivation, defecation, vocalization and panting, after administration of methadone were observed. There were no differences in mean values of heart rate, P-wave and QRS complex duration and QT interval between treatments.Conclusion and clinical relevanceMethadone administration was associated with panting and a decrease in heart rate at all doses tested in this study. The cardiac rhythm should be monitored carefully in dogs when methadone is administered on its own, especially at higher doses.

Time reduction of light curing: Influence on conversion degree and microhardness of orthodontic composites

Introduction: The aim of this study was to assess the influence of curing time and power on the degree of conversion and surface microhardness of 3 orthodontic composites. Methods: One hundred eighty discs, 6 mm in diameter, were divided into 3 groups of 60 samples according to the composite used-Transbond XT (3M Unitek, Monrovia, Calif), Opal Bond MV (Ultradent, South Jordan, Utah), and Transbond Plus Color Change (3M Unitek)-and each group was further divided into 3 subgroups (n = 20). Five samples were used to measure conversion, and 15 were used to measure microhardness. A light-emitting diode curing unit with multiwavelength emission of broad light was used for curing at 3 power levels (530, 760, and 1520 mW) and 3 times (8.5, 6, and 3 seconds), always totaling 4.56 joules. Five specimens from each subgroup were ground and mixed with potassium bromide to produce 8-mm tablets to be compared with 5 others made similarly with the respective noncured composite. These were placed into a spectrometer, and software was used for analysis. A microhardness tester was used to take Knoop hardness (KHN) measurements in 15 discs of each subgroup. The data were analyzed with 2 analysis of variance tests at 2 levels. Results: Differences were found in the conversion degree of the composites cured at different times and powers (P < 0.01). The composites showed similar degrees of conversion when light cured at 8.5 seconds (80.7%) and 6 seconds (79.0%), but not at 3 seconds (75.0%). The conversion degrees of the composites were different, with group 3 (87.2%) higher than group 2 (83.5%), which was higher than group 1 (64.0%). Differences in microhardness were also found (P < 0.01), with lower microhardness at 8.5 seconds (35.2 KHN), but no difference was observed between 6 seconds (41.6 KHN) and 3 seconds (42.8 KHN). Group 3 had the highest surface microhardness (35.9 KHN) compared with group 2 (33.7 KHN) and group 1 (30.0 KHN). Conclusions: Curing time can be reduced up to 6 seconds by increasing the power, with a slight decrease in the degree of conversion at 3 seconds; the decrease has a positive effect on the surface microhardness.

Avaliação da microinfiltração marginal em restaurações de classe V em resina composta em dentes bovinos: efeito de diferentes equipamentos para preparos cavitários e sistemas adesivos

Pós-graduação em Odontologia Restauradora - ICT

Avaliação da biocompatibilidade de quatro agentes para cimentação através do estudo das reações teciduais em conjuntivo da ratos

Pós-graduação em Odontologia Restauradora - ICT

Eficiência de herbicidas no controle de plantas daninhas latifoliadas em mamona

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Sistema automatizado de alimentação de juvenis de tilápia

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Risco climático, vulnerabilidade socioespacial e eventos climáticos extremos relacionados ao calor e ao frio no estado do Rio Grande do Sul- Brasil

Pós-graduação em Geografia - FCT

Limit cycles of cubic polynomial differential systems with rational first integrals of degree 2

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Nonlinear dynamical analysis of an aeroelastic system with multi-segmented moment in the pitch degree-of-freedom

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Liquid nitrogen for the treatment of actinic keratosis: A longitudinal assessment

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Novel estimation of the humification degree of soil organic matter by laser-induced breakdown spectroscopy

Soil organic matter (SOM) constitutes an important reservoir of terrestrial carbon and can be considered an alternative for atmospheric carbon storage, contributing to global warming mitigation. Soil management can favor atmospheric carbon incorporation into SUM or its release from SOM to atmosphere. Thus, the evaluation of the humification degree (HD), which is an indication of the recalcitrance of SOM, can provide an estimation of the capacity of carbon sequestration by soils under various managements. The HD of SOM can be estimated by using various analytical techniques including fluorescence spectroscopy. In the present work, the potential of laser-induced breakdown spectroscopy (LIBS) to estimate the HD of SUM was evaluated for the first time. Intensities of emission lines of Al, Mg and Ca from LIBS spectra showing correlation with fluorescence emissions determined by laser-induced fluorescence spectroscopy (LIFS) reference technique were used to obtain a multivaried calibration model based on the k-nearest neighbor (k-NN) method. The values predicted by the proposed model (A-LIBS) showed strong correlation with LIFS results with a Pearson's coefficient of 0.87. The HD of SUM obtained after normalizing A-LIBS by total carbon in the sample showed a strong correlation to that determined by LIFS (0.94), thus suggesting the great potential of LIBS for this novel application. (C) 2014 Elsevier B.V. All rights reserved.

The Use of Headspace Solid-Phase Microextraction (HS-SPME) to Assess the Quality and Stability of Fruit Products: An Example Using Red Mombin Pulp (Spondias purpurea L.)

The present study aimed to evaluate the volatiles profile of red mombin (Spondias purpurea) pulp and its powder produced by spray-drying (SD) as an example to show utility of headspace solid-phase microextraction (HS-SPME) in the analysis of parameters such as the quality and stability of fruit products. Volatiles profiles of the pulp were identified by gas chromatography-mass spectrometry (GC-MS), quantified by gas chromatography-flame ionization detector (GC-FID) and compared to the profile of the powder stored at 0, 60 and 120 days in plastic (PP) or laminated packages (LP). The results showed that the technique was able to identify 36 compounds in the red mombin pulp, 17 out of which have been described for the first time in this fruit, showing that red mombin fresh pulp appears to be unique in terms of volatiles composition. However, only 24 compounds were detected in the powder. This decrease is highly correlated (r(2) = 0.99), at least for the majority of compounds, to the degree of volatility of compounds. Furthermore, the powder stored in PP or LP showed no statistical differences in the amounts of its components for a period of 120 days of storage. Finally, this work shows how HS-SPME analysis can be a valuable tool to assess the quality and stability of fruit products.

Influência da imunocastração (Bopriva®) no ganho de peso, características de carcaça e qualidade da carne de bovinos Nelore

The objective of this study was evaluate the effects of immunocastration on body weight gain, carcass characteristics and meat quality of Nellore beef cattle. Eighty Nellore beef cattle, with initial body weight of 357 +/- 8.63 kg, were placed in feedlots and distributed in two treatments (40 animals per treatments) as follow: one - non-vaccinated bulls and two - immunocastrated bulls (Bopriva (R), Pfizer Animal Health). The animals placed on treatment two were vaccinated in two doses, first application 30 days before they arrive on the feedlots and second on the day they arrive on feedlots. After 67 days of experimental period, was calculated the daily gain of live weight in kg/day of the 80 animals and selected 20 animals from each treatment for the slaughter and carcass evaluations, and ten from each group for the meat analyzes. The data were submitted to analysis of variance. Immunocastrated animals showed lower daily weight gain, hot carcass weight, carcass yield, pH, leg thickness, muscle depth, loin muscle area, carcass muscle percentage, shear force and moisture. However, this animals had higher concentration of lactate and cortisol blood, chest depth, fat thickness, finishing degree, a *, b * and c*, liquid loss in thawing process, myofibrillar fragmentation index and ether extract of meat when compared to non-vaccinated bulss. The immunocastration (Bopriva (R)) is an alternative for improving the quality of meat by the higher fat deposition and by the reduction of the shear force of the meat when compared to non-vaccinated bulls.

Depressão e apoio social percebido por mães de crianças hospitalizadas

This study was performed as a requirement of the final course in Nursing. The study is cross-cutting, in order to identify associations between socioeconomic factors, education, child hospitalization in the ICU or not, degree of depression and level of social support (material, affective, emotional, informational and positive social interaction) and how to identify subgroups of mother - child vulnerable. Constitute themselves as subjects, mothers of children 0 to 17 years, 11 months and 29 days in hospital after the second day of hospitalization in the pediatric unit of a State Hospital Interior Paulista. Data collection was initiated after obtaining the assent of the Research Ethics Committee, as well as signing the consent form. We used the following instruments to collect data: the data form for socioeconomic and hospitalization; Beck Depression Inventory and Medical Outcomes Study (MOS). We obtained the result that there is a strong association between availability and social support and income per capita and the degree of depression, but did not find an association between time and hospital stay and whether the child was admitted to the ICU or not. We conclude that it is necessary to establish treatment services from the patient’s family, plus an appropriate social service support to meet this big demand for mothers who need support