Pirometamorfismo provocado por intrusões básicas cenozoicas em rochas da Bacia Potiguar, RN: integração de dados geológicos e petrofísicos

The Potiguar Basin is located in the Brazilian Equatorial Margin and presents sedimentary rocks affected by Cenozoic basic igneous intrusions, known as Macau Magmatism. The most prominent effect related to these intrusions is the formation of buchites, pyrometamorphic rocks that occur at very high temperatures and very low pressures in the sanidinite metamorphic facies. Through literature review, field observations, petrographic and petrophysical data, accessing the database of previous studies and results from this research, it was possible to characterize and estimate the effects produced in the thermal aureole of some hypabyssal bodies in the basin. The most relevant features associated with the intrusions are: compactation, hydraulic fracturing, partial melting and recrystallization of country rocks. According to the observed mineral occurrences, temperature of 800 to 1200 °C and pressure below 0,5 kbar were estimated at the contacts of the igneous bodies. The thermal modeling of the São João plug indicates thermal effects extending up to 150 m away from the contact and cooling time of approximately 265,000 years. After the peak of temperature, followed a cooling phase registered by remobilization and precipitation of minerals at low-temperature in faults, fractures and geodes, interpreted as derived from reactions with sedimentary rocks and metasomatic / hydrothermal fluids with abundant carbonatization and silicification.

Pirometamorfismo provocado por intrusões básicas cenozoicas em rochas da Bacia Potiguar, RN: integração de dados geológicos e petrofísicos

The Potiguar Basin is located in the Brazilian Equatorial Margin and presents sedimentary rocks affected by Cenozoic basic igneous intrusions, known as Macau Magmatism. The most prominent effect related to these intrusions is the formation of buchites, pyrometamorphic rocks that occur at very high temperatures and very low pressures in the sanidinite metamorphic facies. Through literature review, field observations, petrographic and petrophysical data, accessing the database of previous studies and results from this research, it was possible to characterize and estimate the effects produced in the thermal aureole of some hypabyssal bodies in the basin. The most relevant features associated with the intrusions are: compactation, hydraulic fracturing, partial melting and recrystallization of country rocks. According to the observed mineral occurrences, temperature of 800 to 1200 °C and pressure below 0,5 kbar were estimated at the contacts of the igneous bodies. The thermal modeling of the São João plug indicates thermal effects extending up to 150 m away from the contact and cooling time of approximately 265,000 years. After the peak of temperature, followed a cooling phase registered by remobilization and precipitation of minerals at low-temperature in faults, fractures and geodes, interpreted as derived from reactions with sedimentary rocks and metasomatic / hydrothermal fluids with abundant carbonatization and silicification.

Biologia reprodutiva de Mimus gilvus (Aves: Mimidae) em área de restinga no nordeste do Brasil

The thrush beach, Mimus gilvus (Aves: Mimidae) is a passerine widely distributed in Central and South America. In Brazil occurs mainly in the areas of the resting and vegetation near the beach. In southeastern Brazil this species has disappeared, mainly due to urbanization. Many attributes of their reproductive biology are unknown, especially in relation to reproductive success. During the years 2010-2011, 2011-2012 and 2014-2015 were made visits to the area of restinga forest in Centro de Lançamento da Barreira do Inferno (CLBI), located between the cities of Natal and Parnamirim-RN (5 ° 54'S 35 ° 10'W ) where they were made systematic searches to trying describe reproductive biology of the characteristics of M. gilvus, estimate their reproductive success using the Mayfield method, and identify the main factors that influence their reproductive success in environment the resting. For this, forty fifth active nests monitored were used. Only during the breeding season of 2011-2012 and 2014-2015 were made systematic visits to the study area. The reproductive period ranged August to March. Clutch size ranged from two, three and six eggs (n = 22). Broods of two eggs were more common, with an average of eggs laid per nest of 2 ± 0,51 (n = 20 nests). The incubation period was approximately 13 ± 1,9 days (n = 11 nests). The period of stay of the nestlings was approximately 11 ± 1,6 days (n = 9 nests). With approximately 11 days old the nestlings were able to leave the nest. The apparent success was 37,8% and the success estimated by Mayfield method was 26,6%. Predation was the main cause of loss of nests in the study area. The daily survival rates (TDS) were obtained from 0,9593 incubation and 0,9313 for nestling period respectively. Survival estimates for each period was 0,5827 for incubation and 0,4571 for nestling period. The cumulative average rainfall for each month influenced negatively the hatching rates of M. gilvus nests. In addition, the number hatch eggs among the most rainy season (rainy season) and the period of lowest rainfall (dry season) were different. The number of lost nests of M. gilvus was lower in scrubs than cactus, which may account for the largest number of nests of this species found in scrubs. Survival rates in nestling period were lower compared with the incubation period. The fact that the survival rates nests of M. gilvus be lower in the nestling period compared to the incubation period may result from increased activity of adults during this phase of the nest, which in turn would increase predation rates. M. gilvus seems to avoid the rainy season during their reproduction, concentrated most of their nests in periods of low rainfall.

Resposta da batata cv. Cupido à fertilização organomineral

Potato crop cycle is relatively short and presents high yield per area; therefore, it is a very demanding culture for available nutrients in the soil solution. Despite its importance and the large number of studies about the crop, there is little research on plant nutrition regarding the use of organomineral fertilizer. This study evaluated potato, cv. Cupid, development and productivity as a function of fertilization with pelletized organomineral fertilizer. The experiment was done in Perdizes, Minas Gerais, in the rainy season of 2014/2015. The experimental design was a randomized blocks, with factorial arrangement of 4 x 2 (doses x management) and a control with mineral fertilizer, with 3 repetitions. Organomineral fertilizer doses were 25, 50, 75 and 100% of the conventional mineral dose, which was 600 kg ha-1 K2SO4, 850 kg ha-1 NH4H2PO4, and 300 kg ha-1 (NH4)2SO4 of topdressing 19 days after planting (DAP). Fertilization managements were with or without topdressing at 19 DAP, when the potato was hilled. Two plants per plot were sampled at 36, 50, 64 and 81 DAP and analyzed for leaf, stem and dry matter contents. DRIS - Diagnosis and Recommendation Integrated System was applied at 36 DAP and the potatoes were harvested 112 DAP and subjected to tuber classification. Throughout the cycle, stem, leaf and tuber dry mass showed no significant differences between the fertilization managements. The doses of organomineral fertilizer and topdressing management does not affect productivity, and the lower doses (25%) were similar the greater ones and the control, with an average of 16.8 t ha-1, demonstrating that it is viable to make a single application of organomineral fertilizer at planting due to operational efficiency. The low yields observed were due to high rainfall and temperature, creating favorable conditions for the incidence of pests and diseases. According to DRIS, the organomineral dose 75% for topdressing, presented the best nutritional balance.

Climatologia da pluviosidade na bacia hidrográfica do Rio Paranaíba

The main aim of this research was to study pluviosity in the Paranaíba Riverbasin, especially concerning the variability frame and trends. For this end, we used data from 22 pluviometric stations of the Agência Nacional da Águas- ANA(National Water Agency)spatially distributed throughout the basin area. The data comprised the years 1979-2013, which is a historical series of 35 years, and was downloaded through the ANA website and tabulated using the Hydro 1.2 software (2015) and Excel. After tabulation process were applied based methodologies for statistical analysis of annual variability, monthly, daily and seasonal rainfall in the basin beyond the trend analysis. Results of this research showed that the annual rainfall averageis 1491 mm. Seasonality is a hallmark and rainfall variability occurs spatially and temporally. Rains are accumulated in the rainy season accumulating 85% of the annual volume in the basin. In daily analysis it was found that the daily rainfall above 30 mm occur in only 3% of the time. Dry season comprises 15% of the rainfall. Trend analysis using linear regression pointed to a downward trend in rainfall in 46% of jobs, stability in 18% of posts and increased rainfall by 36%. As for the analysis using the sign test indicated that 32% of the analyzed rainfall stations showed an increasing trend of rainfall over the time series and 68% of stations showed downward trend. This research is important because shows how rainfall worksin the area of the Paranaiba basin, and may be used to develop better management of natural resources and the area through public policies for this purpose.

Investigação da rota biohidrometalúrgica com Acidithiobacillus ferrooxidans/thiooxidans para recuperação do cobalto de baterias de íons lítio descartadas

The recycling of metals from secondary sources can be advantageous. Among the metals of interest, we have cobalt, a metal used for various purposes. As regards the secondary sources of cobalt, the lithium-ion batteries can be considered, since they contain cobalt oxide in their composition (LiCoO2). This way, the objective of this work was to use the microorganism strains (Acidithiobacillus ferrooxidans and Acidithiobacillus thiooxidans) to bioleach the LiCoO2 extracted from discarded lithium ion batteries with emphasis on the recovery of cobalt for synthesis of new materials of interest. The lineage growth occurred in T&K medium and the growth investigation was made by observing the media, by platelet growth and microscope analysis. Then, the inoculum was standardized on 5 x 106 cells mL-1 and used in bioleaching tests. The bioleaching was investigated: the microorganism nature: separate strains and A. ferrooxidans and A. thiooxidans consortium, bioleaching time (0 to 40 days), inoculum proportion (5 to 50% v/v), energy source (iron and sulfur) and residue concentration (1063 to 8500 mg L-1 of cobalt). The cobalt concentration in the media was found by atomic absorption spectrometry and the medium pH was monitored during the bioleaching. The results show that the amount of bioleached cobalt increases with time and the iron concentration. The bioleaching with A. thiooxidans was not influenced by the addition of sulfur. The use of the two lineages together did not improve the bioleaching rates. Among the lineages, the A. thiooxidans presented better results and was able to bioleach cobalt amounts above 50% in most of the experiments. A. thiooxidans presented lower bioleaching rates, with a maximum of 50% after 24 days of experiment. After reprocessing by bioleaching, the cobalt in solution was used for synthesis of new materials: such as LiCoO2 cathode and as adsorbent pesticide double lamellar hydroxide (HDL Co-Al-Cl) by the Pechini and co-precipitation methods. The reprocessed LiCoO2 presented a unique stoichiometric phase relative to the HT-LiCoO2 structure similar to the JCPDS 44-0145, presenting electrochemical activity when tested as a cathode material. The double lamellar hydroxide Co-Al-Cl was tested as pesticide adsorbent, being possible to adsorb around 100% of the pesticide. The bioleaching was efficient in the recovery of cobalt present in lithium-ion batteries and microorganisms presented high tolerance to the residue, being able to bioleach even at higher LiCoO2 concentrations. The cobalt bioleaching medium did not impair the synthesis phases and the obtained materials presented structure and activity similar to the sintered materials from the reagents containing cobalt.

Desempenho reprodutivo de varrões e matrizes suínas de diferentes linhagens durante as estações do ano

The industrial Brazilian pig farming despite of the constant advance in the genetic improvement, nutrition, and in handling, seasonality problems occur in the production of weaned piglet, mainly due to the stations of the year that can impact directly in the profitability. These problems can be deepen due to breed and line of decent used in Brazil are all source from tempered weather countries. To the pig farmer it's difficult to determine the relations between indoor temperature of the barns, relative humidity of the air and top thermal amplitude which can provide good reproductive rates for the boars and arrays lodged in conventional barns. The lack research to production of environmental indices of easy interpretation to pigs, which are not dependent of complicated handling machines and also which are not expensive is considered as a negative factor from the producers. the objective os this experiment is evaluate the effects of the stations of the year over the reproductive performance of the boars Agroceres PIC 425, Agroceres PIC 337 and D.B. Dambred LM 6200, and of arrays Agroceres Canborough 22, Penarlan Naima e DB90 Danbred, in addition develop an environmental index with easy interpretation and use to the pig farmers of the region of Uberlândia - MG, using the maxim temperatures, rainfall monthly accumulated and of the thermal amplitude of the barn. The features rated during the stations of the years 2013 and 2014 were the volume and spermatic quality of the boars and the mainly reproductive indexes of the arrays as the total number of piglets born alive and total number of weaned piglets/ array/ parturition. The station of the year which had the worst results in the reproductive feature of the boars and arrays was the spring. Boars from different line of decent are sensitive to the effects of stress of the heat of spring causing lowest volume, concentration and problems in the spermatic morphology (p<0,05). The spring prejudice the reproductive indexes of arrays from different line of decent (p<0,05) and the pig farmers of Uberlândia are subjected to operating losses and income evasion due to the thermal stress in the reproduction that added can reach $150.000,00 annual for each 1000 arrays lodged/year.

Conceção e desenvolvimento de produto, ferramenta e célula de produção

O trabalho apresentado descreve todo o processo de conceção e desenvolvimento de um produto, ferramenta e célula de fabrico, realizado numa empresa de moldes situada na zona da Marinha Grande e denominada por Moldes RP – Indústria Moldes, Sociedade Unipessoal, Lda. Com o desenvolvimento deste novo produto, a empresa pretende atingir novos mercados, alargando a sua cadeia de valor a jusante do fabrico de moldes, integrando a componente de moldação por injeção e sopro, como forma de cimentar a sua posição no mercado global e assumir a conceção e desenvolvimentos de produtos como um eixo estratégico de negócios. Uma das formas de despoletar processos de desenvolvimento de produtos reside na identificação de oportunidades. Neste âmbito, e no respeitante ao produto em foco neste trabalho, verifica-se uma tendência para a proibição de utilização de copos de vidro em espaços públicos, nomeadamente concertos, eventos desportivos e praias, entre outros, o que força os promotores e consumidores a consumir bebidas em copos que respeitem estas condições.Neste contexto, foi identificada como oportunidade o desenvolvimento e produção de um copo de formas complexas e que respeite as condições descritas, tendo por base uma metodologia de conceção e desenvolvimento de produto eficaz. Para tal, o processo adotado como suporte ao desenvolvimento deste produto envolveu, desde os conceitos iniciais de identificação da ideia, pesquisa do estado da arte, análise do meio envolvente e a identificação de vantagens competitivas, até à definição clara de requisitos do produto para a geração do modelo. Complementarmente, e ao nível da produção do produto desenvolvido foi desenvolvida uma tecnologia que permite a obtenção do produto idealizado, através da integração da moldação por injeção sobreposta e moldação por sopro. De destacar que este desenvolvimento culminou num pedido de patente. Por último, e tendo em consideração a análise da viabilidade financeira do produto e processo de produção, é ainda efetuada uma estimativa inicial do custo do produto e o cálculo final do produto tendo em conta as condicionantes relativas ao processo de fabrico.

Os deveres gerais dos gestores e a regra de decisão empresarial

Os deveres gerais dos gestores, a responsabilidade civil e a regra de decisão empresarial são o objeto principal do presente estudo. Será incontornável que a atual conjuntura económica, marcada pela recessão generalizada e pela instabilidade dos mercados, contribuiu e contribui para a perda da confiança dos agentes económicos, o que, por corolário, acaba por afetar as sociedades comerciais. Os gestores, neste “ambiente hostil”, ao assumirem o controlo, poderão na sede das suas funções revelar alguma precipitação na tomada das suas decisões, e mesmo deliberações que acabem por não cumprir os interesses da sociedade, dado os constrangimentos estruturais evidenciados. Assim, pretendemos analisar a problemática inerente às questões ligadas à responsabilidade civil dos gestores bem como à determinação e à violação dos respetivos deveres gerais. Pretendemos ainda analisar os pressupostos necessários à exclusão da responsabilidade dos gestores no âmbito da aplicação do nº2, do artigo 72º do CSC. Para concretizarmos o nosso objetivo, traçámos o seguinte plano de estudos: primeiramente será apresentada a delimitação do objeto de estudo, com a exposição de um quadro de conceitos e de dogmáticas considerados primordiais para a compreensão das temáticas sob estudo. Depois de delimitados os problemas jurídicos decorrentes da aplicação do regime legal, avançaremos para a análise das questões controversas que, podemos avançar, são em elevado número. Trataremos, posteriormente, de refletir sobre as soluções avançadas pela doutrina e pela jurisprudência para dar a resolver as preditas questões. Será, neste momento, que apresentaremos a nossa reflexão crítica sobre estas temáticas. O presente estudo será concluído com a apresentação das conclusões principais.

Isolation and structural characterization of fucoidans from the brown algae Fucus vesiculosus

agricultural, pharmaceutical, cosmetic or bioenergy applications. They contain bioactive compounds, namely, polysaccharides Fucoidan. These polysaccharides are mainly constituted by fucose residues and sulfate esters, and have been reported to possess a broad variety of bioactivities, such as anticoagulant, anti-thrombotic, anti-inflammatory, anti-tumor, antiviral and antioxidant. In this work, the fucoidans from brown seaweed Fucus vesiculosus from “Ria de Aveiro” were isolated and characterized in order to add value to this natural resource of the region. The polysaccharides from the algae were extracted with hot water and fractioned by ethanol precipitation and calcium chloride salts. They were further purified by using anion-exchange chromatography, allowing to separate the neutral polysaccharides (laminaranas) from those negatively charged (sulfated fucoidans and alginate). The purified polysaccharides showed high content of fucose (41 mol%) and sulfates (50 mol%), having also galactose residues (6 mol%), which confirm the presence of only sulfated fucoidans. Glycosidic linkages analysis show the presence of high amounts of terminal fucose (25%) and (1→3,4)-Fuc (26%), allowing to infer that the fucoidans were highly branched. These fucoidans are composed also by (1→2)-Fuc (14%) and (1→3)-Fuc linkages (10-16%). In this work it was also tested an alternative extraction technology, the microwave hydrodiffusion and gravity system, where it was possible to extract sugars, although in low yields. However, this methodology allowed to extract polysaccharides, constituted mainly by fucose and uronic acids, as well as mannitol, without the need to add any solvent, obtaining at the end the dry alga. The current work allowed to characterize the structure of the fucoidans isolated from “Ria de Aveiro” F. vesiculosus. The presence of high content of sulfate residues and the high branch degree of the purified fucoidans allow to infer that these polysaccharides could have potential to be studied for biomedical applications, according to their biological activities.

Environmental impacts of freshwater use and suspended solids in life cycle assessment

Perturbation of natural ecosystems, namely by increasing freshwater use and its degradative use, as well as topsoil erosion by water of land-use production systems, have been emerging as topics of high environmental concern. Freshwater use has become a focus of attention in the last few years for all stakeholders involved in the production of goods, mainly agro-industrial and forest-based products, which are freshwater-intensive consumers, requiring large inputs of green and blue water. This thesis presents a global review on the available Water Footprint Assessment and Life Cycle Assessment (LCA)-based methods for measuring and assessing the environmental relevance of freshwater resources use, based on a life cycle perspective. Using some of the available midpoint LCA-based methods, the freshwater use-related impacts of a Portuguese wine (white ‘vinho verde’) were assessed. However, the relevance of environmental green water has been neglected because of the absence of a comprehensive impact assessment method associated with green water flows. To overcome this constraint, this thesis helps to improve and enhance the LCA-based methods by providing a midpoint and spatially explicit Life Cycle Impact Assessment (LCIA) method for assessing impacts on terrestrial green water flow and addressing reductions in surface blue water production caused by reductions in surface runoff due to land-use production systems. The applicability of the proposed method is illustrated by a case study on Eucalyptus globulus conducted in Portugal, as the growth of short rotation forestry is largely dependent on local precipitation. Topsoil erosion by water has been characterised as one of the most upsetting problems for rivers. Because of this, this thesis also focuses on the ecosystem impacts caused by suspended solids (SS) from topsoil erosion that reach freshwater systems. A framework to conduct a spatially distributed SS delivery to freshwater streams and a fate and effect LCIA method to derive site-specific characterisation factors (CFs) for endpoint damage on aquatic ecosystem diversity, namely on algae, macrophyte, and macroinvertebrates organisms, were developed. The applicability of this framework, combined with the derived site-specific CFs, is shown by conducting a case study on E. globulus stands located in Portugal as an example of a land use based system. A spatially explicit LCA assessment was shown to be necessary, since the impacts associated with both green water flows and SS vary greatly as a function of spatial location.

O desafio do aproveitamento de águas pluviais

Pretende-se com este trabalho avaliar a importância dos sistemas de aproveitamento de água da chuva como medida contributiva para a sustentabilidade dos recursos hídricos, a par do alerta para os preços praticados em Portugal, que comprometem a viabilidade deste tipo de sistema. Será também dada especial atenção à vulnerabilidade a que os referidos sistemas estão sujeitos, imposta pelos meses de Verão, onde os consumos de água são substancialmente maiores, mas durante os quais normalmente não ocorre precipitação. Após uma primeira componente teórica, determinar-se-á numa fase posterior o consumo anual de água registado numa moradia em Guimarães, e comparar-se-ão os resultados dos investimentos num sistema de aproveitamento de água da chuva em Portugal e na Dinamarca. Ampliando o âmbito para um edifício de escritórios e um edifício escolar, registar-se-á a rentabilidade do sistema. Essa rentabilidade, referindo-se ao número de anos em que o investimento é amortizado, é determinada numa folha de cálculo a partir da conjugação do valor investido com o valor que, anualmente, se consegue poupar com o uso da água da chuva. Concluir-se-á que o factor que verdadeiramente compromete a diferença entre o investimento e a poupança, reside no baixo valor do metro cúbico de água que, em média, se paga em Portugal. O estudo realizado nesta Dissertação revela que um valor mais alto para o preço da água, traduzir-se-ia numa menor diferença entre o investimento e a poupança, do qual resultava um período de retorno significativamente mais baixo. Além disso, os sistemas de aproveitamento de água da chuva são vulneráveis a diversas dificuldades, como as condições meteorológicas, que se traduzem na falta de precipitação nos meses de Verão onde a procura de água é muito superior.

Proposta de metodologia para certificação hídrica de edifícios residenciais

A presente dissertação tem como objetivo a elaboração de uma proposta de certificação hídrica para edifícios residenciais existentes e em fase de projeto. O desenvolvimento desta certificação incide essencialmente na poupança de água potável nos edifícios, demonstrando que o consumo excessivo da mesma poderá traduzir-se num problema no futuro. O uso eficiente da água assume cada vez mais uma importância acrescida. Neste trabalho enumeram-se alguns países da Europa que, devido a uma má gestão da sua água ou às alterações climáticas (como por exemplo, a diminuição da precipitação), se encontram ou poderão se encontrar em “stress hídrico”. É apresentado o Programa Nacional para o Uso Eficiente da Água, fazendo-se referência aos principais objetivos do programa e às medidas propostas para redução de consumos, nomeadamente no setor urbano e em particular ao nível dos sistemas prediais e dos dispositivos em instalações residenciais. Com base nisto, são apresentados consumos e potenciais reduções com a implantação de equipamentos hidricamente eficientes e sistemas de aproveitamento de águas em algumas moradias. Após uma análise de sistemas de certificação da construção sustentável existentes, nacionais e internacionais, é apresentada uma proposta de certificação hídrica de edifícios residenciais. A proposta de certificação é apresentada com recurso a folhas de cálculo Excel.Assenta essencialmente na quantificação dos consumos dos equipamentos sanitários e cálculo do contributo dos sistemas de aproveitamento de águas, sejam cinzentas ou pluviais. À semelhança da certificação energética, a proposta de certificação hídrica faz uma comparação dos consumos da habitação em avaliação com um modelo criado de referência, propondo depois, algumas melhorias que o consumidor pode adotar para melhorar a eficiência da sua residência.

Cimentos injetáveis à base de fosfatos de cálcio para vertebroplastia

O principal objectivo desta investigação foi o desenvolvimento cimentos de fosfatos de cálcio com injetabilidade melhorada e propriedades mecânicas adequadas para aplicação em vertebroplastia. Os pós de fosfato de tricálcico (TCP) não dopados e dopados (Mg, Sr e Mn) usados neste estudo foram obtidos pelo processo de precipitação em meio aquoso, seguidos de tratamento térmico de forma a obter as fases pretendidas, α− e β−TCP. A substituição parcial de iões Ca por iões dopantes mostrou ter implicações em termos de estabilidade térmica da fase β−TCP. Os resultados demonstraram que as transformações de fase alotrópicas β↔α−TCP são fortemente influenciadas por variáveis experimentais como a taxa de arrefecimento, a presença de impurezas de pirofosfato de cálcio e a extensão do grau de dopagem com Mg. Os cimentos foram preparados através da mistura de pós, β−TCP (não dopados e dopados) e fosfato monocálcico monidratado (MCPM), com meios líquidos diferentes usando ácido cítrico e açucares (sucrose e frutose) como agentes retardadores de presa, e o polietilenoglicol, a hidroxipropilmetilcelulose e a polivinilpirrolidona como agentes gelificantes. Estes aditivos, principalmente o ácido cítrico, e o MCPM aumentam significativamente a força iónica do meio, influenciando a injetabilidade das pastas. Os resultados também mostraram que a distribuição de tamanho de partícula dos pós é um factor determinante na injetabilidade das pastas cimentícias. A combinação da co-dopagem de Mn e Sr com a adição de sucrose no líquido de presa e com uma distribuição de tamanho de partícula dos pós adequada resultou em cimentos de brushite com propriedades bastante melhoradas em termos de manuseamento, microestrutura, comportamento mecânico e biológico: (i) o tempo inicial de presa passou de ~3 min to ~9 min; (ii) as pastas cimentícias foram totalmente injectadas para uma razão liquido/pó de 0.28 mL g−1 com ausência do efeito de “filter-pressing” (separação de fases líquida e sólida); (iii) após imersão numa solução durante 48 h, as amostras de cimento molhadas apresentam uma porosidade total de ~32% e uma resistência a compressão de ~17 MPa, valor muito superior ao obtido para os cimentos sem açúcar não dopados (5 MPa) ou dopados só com Sr (10 MPa); e (iv) o desempenho biológico, incluindo a adesão e crescimento de células osteoblásticas na superfície do cimento, foi muito melhorado. Este conjunto de propriedades torna os cimentos excelentes para regeneração óssea e engenharia de tecidos, e muito promissores para aplicação em vertebroplastia.

Estudo de caso: minimização e reúso de água em shopping center da região sul do Brasil

The main issues related to water conservation in urban centers are the increase in water supply cost, demand growth, pollution and differences in the distribution of water resources. Water conservation, the controlled and efficient use of water, includes both measures as reasonable means of water reuse. Thus, conservation practices are an effective way to meet demand and supply water to new activities and users without jeopardizing the supplying water bodies and preserving the natural environment. This study aims to examine the water management of a shopping mall and the use of rainwater harvesting combined with greywater reuse. For buildings in general, water loss is common due to leaks in the hydraulic and restroom equipment. These losses, which are caused by a high volume of water used and wasted in the system, are often the result of design errors, incorrect maintenance procedures and users' bad habits In southern Brazil, where there is rainfall almost all year long, water shortages occasionally occur, particularly in some winter mouths. One difficulty that appears on rainwater studies is the proper determination of rainwater volume that can be used to address water supply systems. In this work, the simulation method was used to determine this volume. Thus, simulations with the following variables: rainfall, catchment area and water consumption were performed. For mall's hydraulic systems, segmented alternatives are adopted. That is, focusing on the use of rainwater or greywater reuse. Other alternatives of effluent reuse have been slightly discussed due to sanitary issues, those are effluents from toilets and kitchen sinks. The adoption of greywater may be feasible if there is a significant flow of greywater to comply water demand for toilet flushing. The inspections made in this study found that the quantity of sinks was insufficient to supply an adequate amount of water to toilets and urinals. The greywater reuse system was found to be infeasible in terms of demand and supply of water. Conversely, the rainwater harvesting system was entirely feasible and easily supplied water to all restrooms and contributed to the cooling of the air conditioning system with a short payback period. One of the challenges of this work was the need to compare the actual water consumption with a water consumption parameter used in buildings. Thus, a method that addresses the generation of specific consumption indexes for specific activity (like a mall) was used. The water consumption indices showed that this mall has a satisfactory water management program.