Molecular and structural requirements of the ��1L-adrenoceptor

Noradrenaline which occurs naturally in the body binds to beta-adrenoceptors on the heart, causing the heart to beat faster and with greater force in response to increased demand. This enables the heart to provide oxygenated blood to vital organs. Prolonged overstimulation by noradrenaline can be harmful to the heart and lead to the progression of heart disease. In these circumstances beta-adrenoceptors are blocked with drugs called beta-blockers. Beta-blockers block the effects of noradrenaline by binding to the same site on the beta-adrenoceptor. Some beta-blockers such as CGP12177 can also cause increases in heart rate. Therefore it was proposed that CGP12177 could bind in a different place to noradrenaline. The aim of this study was to determine where CGP12177 binds to on the beta-adrenoceptor. The results have revealed a separate binding site named beta-1-low. These results may lead to the development of improved ���-blockers for the management of heart conditions.

Transmission X-ray microscopy : a new tool in clay mineral floccules characterization

Effective flocculation and dewatering of mineral processing streams containing clays are microstructure dependent in clay-water systems. Initial clay flocculation is crucial in the design and for the development of a new methodology of gas exploitation. Microstructural engineering of clay aggregates using covalent cations and Keggin macromolecules have been monitored using the new state of the art Transmission X-ray Microscope (TXM) with 60 nm tomography resolution installed in a Taiwanese synchrotron. The 3-D reconstructions from TXM images show complex aggregation structures in montmorillonite aqueous suspensions after treatment with Na+, Ca2+ and Al13 Keggin macromolecules. Na-montmorillonite displays elongated, parallel, well-orientated and closed-void cellular networks, 0.5���3 ��m in diameter. After treatment by covalent cations, the coagulated structure displays much smaller, randomly orientated and openly connected cells, 300���600 nm in diameter. The average distances measured between montmorillonite sheets was around 450 nm, which is less than half of the cell dimension measured in Na-montmorillonite. The most dramatic structural changes were observed after treatment by Al13 Keggin; aggregates then became arranged in compacted domains of a 300 nm average diameter composed of thick face-to-face oriented sheets, which forms porous aggregates with larger intra-aggregate open and connected voids.

Framework for evaluating collaborative intrusion detection systems

Securing IT infrastructures of our modern lives is a challenging task because of their increasing complexity, scale and agile nature. Monolithic approaches such as using stand-alone firewalls and IDS devices for protecting the perimeter cannot cope with complex malwares and multistep attacks. Collaborative security emerges as a promising approach. But, research results in collaborative security are not mature, yet, and they require continuous evaluation and testing. In this work, we present CIDE, a Collaborative Intrusion Detection Extension for the network security simulation platform ( NeSSi 2 ). Built-in functionalities include dynamic group formation based on node preferences, group-internal communication, group management and an approach for handling the infection process for malware-based attacks. The CIDE simulation environment provides functionalities for easy implementation of collaborating nodes in large-scale setups. We evaluate the group communication mechanism on the one hand and provide a case study and evaluate our collaborative security evaluation platform in a signature exchange scenario on the other.

Context-aware device self-configuration using self-organizing maps

Modern mobile computing devices are versatile, but bring the burden of constant settings adjustment according to the current conditions of the environment. While until today, this task has to be accomplished by the human user, the variety of sensors usually deployed in such a handset provides enough data for autonomous self-configuration by a learning, adaptive system. However, this data is not fully available at certain points in time, or can contain false values. Handling potentially incomplete sensor data to detect context changes without a semantic layer represents a scientific challenge which we address with our approach. A novel machine learning technique is presented - the Missing-Values-SOM - which solves this problem by predicting setting adjustments based on context information. Our method is centered around a self-organizing map, extending it to provide a means of handling missing values. We demonstrate the performance of our approach on mobile context snapshots, as well as on classical machine learning datasets.

Enhancing photoactivity of TiO2(B)/anatase core-shell nanofibers by selectively doping cerium ions into the TiO2(B) Core

Cerium ions (Ce3+) can beselectively doped into the TiO2(B) core of TiO2(B)/anatase core���shell nanofibers by means of a simple one-pot hydrothermal treatment of a starting material of hydrogen trititanate (H2Ti3O7) nanofibers. These Ce3+ ions (���0.202 nm) are located on the (110) lattice planes of the TiO2(B) core in tunnels (width���0.297 nm). The introduction of Ce3+ ions reduces the defects of the TiO2(B) core by inhibiting the faster growth of (110) lattice planes. More importantly, the redox potential of the Ce3+/Ce4+ couple (E0(Ce3+/Ce4+)=1.715 V versus the normal hydrogen electrode) is more negative than the valence band of TiO2(B). Therefore, once the Ce3+-doped nanofibers are irradiated by UV light, the doped Ce3+ ions in close vicinity to the interface between the TiO2(B) core and anatase nanoshell can efficiently trap the photogenerated holes. This facilitates the migration of holes from the anatase shell and leaves more photogenerated electrons in the anatase nanoshell, which results in a highly efficient separation of photogenerated charges in the anatase nanoshell. Hence, this enhanced charge-separation mechanism accelerates dye degradation and alcohol oxidation processes. The one-pot treatment doping strategy is also used to selectively dope other metal ions with variable oxidation states such as Co2+/3+ and Cu+/2+ ions. The doping substantially improves the photocatalytic activity of the mixed-phase nanofibers. In contrast, the doping of ions with an invariable oxidation state, such as Zn2+, Ca2+, or Mg2+, does not enhance the photoactivity of the mixed-phase nanofibers as the ions could not trap the photogenerated holes.

Tsunami alert : the mobile phone difference

Substantial growth has occurred in the telecommunication sector in Papua New Guinea (PNG) since 2007. Mobile telephony has spread to rural and remote localities, following decades of inadequate telephone services. This paper examines the introduction of mobile telephones into a rural village in PNG, and focuses on information access during emergency situations. It considers three tsunami alerts: one immediately prior to the introduction of mobile phone services in the area, and two which occurred after mobile phone reception became available. The research shows that for people with limited access to information, responses to threats such as tsunamis can be inappropriate and driven by fear and panic. By contrast, when there is reliable, timely information available, measured responses can be adopted. This research demonstrates how the use of newly-introduced communication technologies for handling emergencies may work in practice, benefitting people in poorer, rural communities.

Can a community pharmacy sleep assessment tool aid the identification of patients at risk of sleep disorders in the community : a pilot study

Background: When experiencing sleep problems for the first time, consumers may often approach community pharmacists for advice as they are easily accessible health care professionals in the community. In Australian community pharmacies there are no specific tools available for use by pharmacists to assist with the assessment and handling of consumers with sleep enquiries. Objective: To assess the feasibility of improving the detection of sleep disorders within the community through the pilot of a newly developed Community Pharmacy Sleep Assessment Tool (COP-SAT). Method: The COP-SAT was designed to incorporate elements from a number of existing, standardized, and validated clinical screening measures. The COP-SAT was trialed in four Australian community pharmacies over a 4-week period. Key findings: A total of 241 community pharmacy consumers were assessed using the COP-SAT. A total of 74 (30.7%) were assessed as being at risk of insomnia, 26 (10.7%) were at risk of daytime sleepiness, 19 (7.9%) were at risk of obstructive sleep apnea, and 121 (50.2%) were regular snorers. A total of 116 (48.1%) participants indicated that they consume caffeine before bedtime, of which 55 (47%) had associated symptoms of sleep onset insomnia. Moreover, 85 (35%) consumed alcohol before bedtime, of which 50 (58%) experienced fragmented sleep, 50 (58%) were regular snorers, and nine (10.6%) had apnea symptoms. The COP-SAT was feasible in the community pharmacy setting. The prevalence of sleep disorders in the sampled population was high, but generally consistent with previous studies on the general population. Conclusion: A large proportion of participants reported sleep disorder symptoms, and a link was found between the consumption of alcohol and caffeine substances at bedtime and associated symptoms. While larger studies are needed to assess the clinical properties of the tool, the results of this feasibility study have demonstrated that the COP-SAT may be a practical tool for the identification of patients at risk of developing sleep disorders in the community.

Beginning teachers��� achievements and challenges : implications for induction and mentoring

It is recognised worldwide that beginning teachers require more support as reasons for high attrition rates (e.g., lack of appreciation from colleagues, unsatisfying working conditions, inadequate teacher preparation) indicate current systems are failing them. One way of addressing their specific needs is to understand their achievements and challenges during their first year of teaching. This qualitative study tracks 10 beginning primary teachers��� achievements and challenges at two points (April and September) during their first year of teaching in Australian public schools. Findings showed that building relationships and behaviour management were considered achievements at these two points, yet behaviour management was also considered a challenge. Other challenges included: learning differentiation, working with parents, and negotiating a life-work balance. Induction into the school culture and infrastructure continued to be important, especially developing skills on handling difficult parents and creating a life-work balance. Simultaneously, they required mentoring for effective teaching in classroom management and differentiation. A two-prong approach of induction into the school culture and infrastructure and mentoring for effective teaching needs to continue throughout the first year of teaching, and possibly beyond.

Integrated configuration of enterprise systems for interoperability : towards process model and business document specification alignment

Enterprise Systems (ES) can be understood as the de facto standard for holistic operational and managerial support within an organization. Most commonly ES are offered as commercial off-the-shelf packages, requiring customization in the user organization. This process is a complex and resource-intensive task, which often prevents small and midsize enterprises (SME) from undertaking configuration projects. Especially in the SME market independent software vendors provide pre-configured ES for a small customer base. The problem of ES configuration is shifted from the customer to the vendor, but remains critical. We argue that the yet unexplored link between process configuration and business document configuration must be closer examined as both types of configuration are closely tied to one another.

Escalation of conflict in large private family businesses

This study investigates escalation of intra-familial conflicts in family top management teams. Using a Critical Incident Technique approach, this study uses interviews to collect data from 23 family and non-family individuals and groups within six large-scale privately-held family businesses in Indonesia. The study develops a theoretical model to explain why family business conflicts escalate and become destructive. An inductive content analysis found that the use of a dominating strategy by both parties in dealing with conflict, the expression of negative emotions, and the involvement of non-family employees are more likely to cause escalation. This study contributes to the theory of family business conflict to help family business more satisfying and productive.

Thermogravimetric analysis of selected layered double hydroxides

Thermogravimetric analysis (TG) and powder X-ray diffraction (PXRD) were used to study some selected Mg/Al and Zn/Al layered double hydroxides (LDHs) prepared by co-precipitation. A Mg/Al hydrotalcite was investigated before and after reformation in fluoride and nitrate solutions. Little change in the TG or PXRD patterns was observed. It was proposed that successful intercalation of nitrate anions has occurred. However, the absence of any change in the d(003) interlayer spacing suggests that fluoride anions were not intercalated between the LDH layers. Any fluoride anions that were removed from solution are most likely adsorbed onto the outer surfaces of the hydrotalcite. As fluoride removal was not quantified it is not possible to confirm that this has happened without further experimentation. Carbonate is probably intercalated into the interlayer of these hydrotalcites, as well as fluoride or nitrate. The carbonate most likely originates from either incomplete decarbonation during thermal activation or adsorption from the atmosphere or dissolved in the deionised water. Small and large scale co-precipitation syntheses of a Zn/Al LDH were also investigated to determine if there was any change in the product. While the small scale experiment produced a good quality LDH of reasonable purity; the large scale synthesis resulted in several additional phases. Imprecise measurement and difficulty in handling the large quantities of reagents appeared to be sufficient to alter the reaction conditions causing a mixture of phases to be formed.

Conflict and communication among engineers

The trend of cultural diversity is increasing in all organizations, especially engineering ones, due to globalization, mergers, joint ventures and the movement of the workforce. The collaborative nature of projects in engineering industries requires long-term teamwork between local and international engineers. Research confirms a specific culture among engineering companies that isassumed to have a negative effect on collaboration and communication among co-workers. Multicultural workplaces have been reported as challenging environments in the engineering work culture, which calls for more research among engineering organizations. An everyday challenge for co-workers, especially in culturally diverse contexts, is handling interpersonal conflict. This perceived conflict among individuals can happen because of actual differences in tasks or relationships. Research demonstrates that task conflict at the group level has some positive effects on decision-making and innovation, while it has negative effects on employees��� work attitude and performance. However, relationship conflict at the individual level has only negative effects including frustration, tension, low job satisfaction, high employee turnover and low productivity. Outcomes of both task and relationship conflict at individual level can have long-term negative consequences like damaged organizational commitment. One of the most important sources of differences between individuals, which results in conflict, is their cultural backgrounds. First, this thesis suggests that in culturally diverse workplaces, people perceive more relationship conflict than task conflict. Second, this thesis examines interpersonal communication in culturally diverse work places. Communicating effectively in culturally diverse workplaces is crucial for today���s business. Culture has a large effect on the ways that people communicate with each other. Ineffective communication can escalate interpersonal conflict and cause frustration in the long term. Communication satisfaction, defined as enjoying the communication and feeling that the communication was appropriate and effective, has a positive effect on individuals��� psychological wellbeing. In a culturally diverse workplace, it is assumed that individuals feel less satisfied with their interpersonal communications because of their lack of knowledge about other cultures��� communication norms. To manage interpersonal interactions, many authors suggest that individuals need a specific capability, i.e., cultural intelligence (some studies use cultural competence, global intelligence or intercultural competence interchangeably). Some authors argue that cultures are synergic and convergent and the postmodernist definition of culture is just our dominant beliefs. However, other authors suggest that cultural intelligence is the strongest and most comprehensive competency for managing cross-cultural interactions, because various cultures differ so greatly at the micro level. This thesis argues that individuals with a high level of cultural intelligence perceive less interpersonal conflict and more satisfaction with their interpersonal communication. Third, this thesis also looks at individuals' perception of cultural diversity. It is suggested that level of cultural diversity plays a moderating role on all of the proposed relationships (effect of cultural intelligence on perception of relationship conflict/ communication satisfaction) This thesis examines the relationship among cultural diversity, cultural intelligence, interpersonal conflict and communication by surveying eleven companies in the oil and gas industry. The multicultural nature of companies within the oil and gas industry and the characteristics of engineering culture call for more in-depth research on interpersonal interactions. A total of 286 invitation emails were sent and 118 respondents replied to the survey, giving a 41.26 per cent response rate. All the respondents were engineers, engineering managers or practical technicians. The average age of the participants was 36.93 years and 58.82 per cent were male. Overall, 47.6 per cent of the respondents had at least a master���s degree. Totally, 42.85 per cent of the respondents were working in a country that was not their country of birth. The overall findings reveal that cultural diversity and cultural intelligence significantly influence interpersonal conflict and communication satisfaction. Further, this thesis also finds that cultural intelligence is an effective competency for dealing with the perception of interpersonal relationship conflict and communication satisfaction when the level of cultural diversity is moderate to high. This thesis suggests that cultural intelligence training is necessary to increase the level of this competency among employees in order to help them to have better understanding of other cultures. Human resource management can design these training courses with consideration for the level of cultural diversity within the organization.

The nature of intra-familial conflict in large-scale privately-held family businesses in Indonesia

This thesis is a qualitative study aimed at better capturing the complexity of conflict in family businesses. An inductive content analysis revealed two important issues: the dynamics of intergenerational conflicts and the escalation process of conflicts. The results demonstrated that conflicts are more likely to be intergenerational than intra-generational due to the role of senior members in daily business operations, generational differences, and a perception gap that exist between generations concerning each other���s competencies in doing the business. Furthermore, the set of factors contributing to conflict escalation is related to how family members handle the conflict, how they manage their emotions, and how they are able to avoid non-family employee involvement. These findings provide a foundation for taking preventative actions, implementing strategies for managing conflicts or devising effective solutions for resolving conflicts before they become more destructive.

The influence of temperature and introduction point on the detection of Rhyzopertha dominica in stored grain

The presence of insect pests in grain storages throughout the supply chain is a significant problem for farmers, grain handlers, and distributors world-wide. Insect monitoring and sampling programmes are used in the stored grains industry for the detection and estimation of pest populations. At the low pest densities dictated by economic and commercial requirements, the accuracy of both detection and abundance estimates can be influenced by variations in the spatial structure of pest populations over short distances. Geostatistical analysis of Rhyzopertha dominica populations in 2 and 3 dimensions showed that insect numbers were positively correlated over short (0.5 cm) distances, and negatively correlated over longer (.10 cm) distances. At 35 C, insects were located significantly further from the grain surface than at 25 and 30 C. Dispersion metrics showed statistically significant aggregation in all cases. The observed heterogeneous spatial distribution of R. dominica may also be influenced by factors such as the site of initial infestation and disturbance during handling. To account for these additional factors, I significantly extended a simulation model that incorporates both pest growth and movement through a typical stored-grain supply chain. By incorporating the effects of abundance, initial infestation site, grain handling, and treatment on pest spatial distribution, I developed a supply chain model incorporating estimates of pest spatial distribution. This was used to examine several scenarios representative of grain movement through a supply chain, and determine the influence of infestation location and grain disturbance on the sampling intensity required to detect pest infestations at various infestation rates. This study has investigated the effects of temperature, infestation point, and grain handling on the spatial distribution and detection of R. dominica. The proportion of grain infested was found to be dependent upon abundance, initial pest location, and grain handling. Simulation modelling indicated that accounting for these factors when developing sampling strategies for stored grain has the potential to significantly reduce sampling costs while simultaneously improving detection rate, resulting in reduced storage and pest management cost while improving grain quality.

A neural-network based flight controller for UASs

This paper presents a nonlinear gust-attenuation controller based on constrained neural-network (NN) theory. The controller aims to achieve sufficient stability and handling quality for a fixed-wing unmanned aerial system (UAS) in a gusty environment when control inputs are subjected to constraints. Constraints in inputs emulate situations where aircraft actuators fail requiring the aircraft to be operated with fail-safe capability. The proposed controller enables gust-attenuation property and stabilizes the aircraft dynamics in a gusty environment. The proposed flight controller is obtained by solving the Hamilton-Jacobi-Isaacs (HJI) equations based on an policy iteration (PI) approach. Performance of the controller is evaluated using a high-fidelity six degree-of-freedom Shadow UAS model. Simulations show that our controller demonstrates great performance improvement in a gusty environment, especially in angle-of-attack (AOA), pitch and pitch rate. Comparative studies are conducted with the proportional-integral-derivative (PID) controllers, justifying the efficiency of our controller and verifying its suitability for integration into the design of flight control systems for forced landing of UASs.