Developing a research method to test a new first-order decision making model for the procurement of public sector major infrastructure

Given global demand for new infrastructure, governments face substantial challenges in funding new infrastructure and simultaneously delivering Value for Money (VfM). The paper begins with an update on a key development in a new early/first-order procurement decision making model that deploys production cost/benefit theory and theories concerning transaction costs from the New Institutional Economics, in order to identify a procurement mode that is likely to deliver the best ratio of production costs and transaction costs to production benefits, and therefore deliver superior VfM relative to alternative procurement modes. In doing so, the new procurement model is also able to address the uncertainty concerning the relative merits of Public-Private Partnerships (PPP) and non-PPP procurement approaches. The main aim of the paper is to develop competition as a dependent variable/proxy for VfM and a hypothesis (overarching proposition), as well as developing a research method to test the new procurement model. Competition reflects both production costs and benefits (absolute level of competition) and transaction costs (level of realised competition) and is a key proxy for VfM. Using competition as a proxy for VfM, the overarching proposition is given as: When the actual procurement mode matches the predicted (theoretical) procurement mode (informed by the new procurement model), then actual competition is expected to match potential competition (based on actual capacity). To collect data to test this proposition, the research method that is developed in this paper combines a survey and case study approach. More specifically, data collection instruments for the surveys to collect data on actual procurement, actual competition and potential competition are outlined. Finally, plans for analysing this survey data are briefly mentioned, along with noting the planned use of analytical pattern matching in deploying the new procurement model and in order to develop the predicted (theoretical) procurement mode.

Manipulating task constraints to improve tactical knowledge and collective decision-making in rugby union

In team sports such as rugby union, a myriad of decisions and actions occur within the boundaries that compose the performance perceptual- motor workspace. The way that these performance boundaries constrain decision making and action has recently interested researchers and has involved developing an understanding of the concept of constraints. Considering team sports as complex dynamical systems, signifies that they are composed of multiple, independent agents (i.e. individual players) whose interactions are highly integrated. This level of complexity is characterized by the multiple ways that players in a rugby field can interact. It affords the emergence of rich patterns of behaviour, such as rucks, mauls, and collective tactical actions that emerge due to players’ adjustments to dynamically varying competition environments. During performance, the decisions and actions of each player are constrained by multiple causes (e.g. technical and tactical skills, emotional states, plans, thoughts, etc.) that generate multiple effects (e.g. to run or pass, to move forward to tackle or maintain position and drive the opponent to the line), a prime feature in a complex systems approach to team games performance (Bar- Yam, 2004). To establish a bridge between the complexity sciences and learning design in team sports like rugby union, the aim of practice sessions is to prepare players to pick up and explore the information available in the multiple constraints (i.e. the causes) that influence performance. Therefore, learning design in training sessions should be soundly based on the interactions amongst players (i.e.teammates and opponents) that will occur in rugby matches. To improve individual and collective decision making in rugby union, Passos and colleagues proposed in previous work a performer- environment interaction- based approach rather than a traditional performer- based approach (Passos, Araújo, Davids & Shuttleworth, 2008).

Exploring the role of the governing body (board) in information technology governance : a study of Australian universities

In this thesis, I advance the understanding of information technology (IT) governance research and corporate governance research by considering the question “How do boards govern IT?” The importance of IT to business has increased over the last decade, but there has been little academic research which has focused on boards and their role in the governance of IT (Van Grembergen, De Haes and Guldentops, 2004). Most of the research on information technology governance (ITG) has focused on advancing the understanding and measurement of the components of the ITG model (Buckby, Best & Stewart, 2008; Wilkin & Chenhall, 2010), a model recommended by the IT Governance Institute (2003) as ‘best practice’ for boards to use in governing IT. IT governance is considered to be the responsibility of the board and is said to form an important subset of an organisation’s corporate governance processes (Borth & Bradley, 2008). Boards need to govern IT as a result of the large capital investment in IT resources and high dependency on IT by organisations. Van Grembergen, De Haes and Guldentops (2004) and De Haes & Van Grembergen (2009) indicate that corporate governance matters are not able to be effectively discharged unless IT is being governed properly, and call for further specific research on the role of the board in ITG. Researchers also indicate that the link between corporate governance and IT governance has been neglected (Borth & Bradley, 2008; Musson & Jordan, 2005; Bhattacharjya & Chang, 2008). This thesis will address this gap in the ITG literature by providing the bridge between the ITG and corporate governance literatures. My thesis uses a critical realist epistemology and a mixed method approach to gather insights into my research question. In the first phase of my research I develop a survey instrument to assess whether boards consider the components of the ITG model in governing IT. The results of this first study indicated that directors do not conceptualise their role in governing IT using the elements of the ITG model. Thus, I moved to focus on whether prominent corporate governance theories might elucidate how boards govern IT. In the second phase of the research, I used a qualitative inductive case based study to assess whether agency, stewardship and resource dependence theories explain how boards govern IT in Australian universities. As the first in-depth study of university IT governance processes, my research contributes to the ITG research field by revealing that Australian university board governance of IT is characterized by a combination of agency theory and stewardship theory behaviours and processes. The study also identified strong links between a university’s IT structure and evidence of agency and stewardship theories. This link provides insight into the structures element of the emerging enterprise governance of IT framework (Van Grembergen, De Haes & Guldentops, 2004; De Haes & Van Grembergen, 2009; Van Grembergen & De Haes, 2009b; Ko & Fink, 2010). My research makes an important contribution to governance research by identifying a key link between corporate and ITG literatures and providing insight into board IT governance processes. The research conducted in my thesis should encourage future researchers to continue to explore the links between corporate and IT governance research.

What it means to become a public relations professional: student perceptions of professional identity through real-world learning

Public relations educators need new solutions to prepare students to become tomorrow's practitioner today. Managers and employers in the new creative workforce (McWilliam, 2008) expect graduates to be problem solvers, critical and creative thinkers, reflective, and self reliant (Barrie, 2008; David, 2004). Enabling students to develop these attributes requires a collaborative and creative approach to pedagogy (Jeffrey & Craft, 2001, 2004). A model for the next generation of public relations education was developed to integrate industry partnerships as a way to bridge pedagogy and professional practice. The model suggests (a) that industry partnerships be embedded in learning activities, (b) that assessment items be considered on a continuum and delivered incrementally across a course of study, and (c) that connections between classroom and workplace activities are clearly signposted for students.

An experimental research investigation into disused flat rail wagons as bridges with applications for low volume rural roads in Australia

An experimental laboratory investigation was carried out to assess the structural adequacy of a disused PHO Class Flat Bottom Rail Wagon (FRW) for a single lane low volume road bridge application as per the design provisions of the Australian Bridge Design Standard AS 5100(2004). The investigation also encompassed a review into the risk associated with the pre-existing damage in wagons incurred during their service life on rail. The main objective of the laboratory testing of the FRW was to physically measure its performance under the same applied traffic loading it would be required to resist as a road bridge deck. In order to achieve this a full width (5.2m) single lane, single span (approximately 10m), simply supported bridge would be required to be constructed and tested in a structural laboratory. However, the available clear spacing between the columns of the loading portal frame encountered within the laboratory was insufficient to accommodate the 5.2m wide bridge deck excluding clearance normally considered necessary in structural testing. Therefore, only half of the full scale bridge deck (single FRW of width 2.6m) was able to be accommodated and tested; with the continuity of the bridge deck in the lateral direction applied as boundary constraints along the full length of the FRW at six selected locations. This represents a novel approach not yet reported in the literature for bridge deck testing to the best of the knowledge of the author. The test was carried out under two loadings provided in AS 5100 (2004) – one stationary W80 wheel load and the second a moving axle load M1600. As the bridge investigated in the study is a single lane single span low volume road bridge, the risk of pre-existing damage and the expected high cycle fatigue failure potential was assessed as being minimal and hence the bridge deck was not tested structurally for fatigue/ fracture. The high axle load requirements have instead been focussed upon the investigation into the serviceability and ultimate limit state requirements. The testing regime adopted however involved extensive recording of strains and deflections at several critical locations of the FRW. Three locations of W80 point load and two locations of the M1600 Axle load were considered for the serviceability testing; the FRW was also tested under the ultimate load dictated by the M1600. The outcomes of the experimental investigation have demonstrated that the FRW is structurally adequate to resist the prescribed traffic loadings outlaid in AS 5100 (2004). As the loading was directly applied on to the FRW, the laboratory testing is assessed as being significantly conservative. The FRW bridge deck in the field would only resist the load transferred by the running platform, where, depending on the design, composite action might exist – thereby the share of the loading which needs to be resisted by the FRW would be smaller than the system tested in the lab. On this basis, a demonstration bridge is under construction at the time of writing this thesis and future research will involve field testing in order to assess its performance.

Designing university, government and industry community engagement to build informed and effective interventions in the area of road safety

Individuals, community organisations and industry have always been involved to varying degrees in efforts to address the Queensland road toll. Traditionally, road crash prevention efforts have been led by state and local government organisations. While community and industry groups have sometimes become involved (e.g. Driver Reviver campaign), their efforts have largely been uncoordinated and under-resourced. A common strength of these initiatives lies in the energy, enthusiasm and persistence of community-based efforts. Conversely, a weakness has sometimes been the lack of knowledge, awareness or prioritisation of evidence-based interventions or their capacity to build on collaborative efforts. In 2000, the Queensland University of Technology’s Centre for Accident Research and Road Safety – Queensland (CARRS-Q) identified this issue as an opportunity to bridge practice and research and began acknowledging a selection of these initiatives, in partnership with the RACQ, through the Queensland Road Safety Awards program. After nine years it became apparent there was need to strengthen this connection, with the Centre establishing a Community Engagement Workshop in 2009 as part of the overall Awards program. With an aim of providing community participants opportunities to see, hear and discuss the experiences of others, this event was further developed in 2010, and with the collaboration of the Queensland Department of Transport and Main Roads, the RACQ, Queensland Police Service and Leighton Contractors Pty Ltd, a stand-alone Queensland Road Safety Awards Community Engagement Workshop was held in 2010. Each collaborating organisation recognised a need to mobilise the community through effective information and knowledge sharing, and recognised that learning and discussion can influence lasting behaviour change and action in this often emotive, yet not always evidence-based, area. This free event featured a number of speakers representing successful projects from around Australia and overseas. Attendees were encouraged to interact with the speakers, to ask questions, and most importantly, build connections with other attendees to build a ‘community road safety army’ all working throughout Australia on projects underpinned by evaluated research. The workshop facilitated the integration of research, policy and grass-roots action enhancing the success of community road safety initiatives. For collaboration partners, the event enabled them to transfer their knowledge in an engaged approach, working within a more personal communication process. An analysis of the success factors for this event identified openness to community groups and individuals, relevance of content to local initiatives, generous support with the provision of online materials and ongoing communication with key staff members as critical and supports the view that the university can directly provide both the leadership and the research needed for effective and credible community-based initiatives to address injury and death on the roads.

Library and information science education 2.0 : guiding principles and models of best practice ALTC Fellowship Report

This ALTC Teaching Fellowship aimed to establish Guiding Principles for Library and Information Science Education 2.0. The aim was achieved by (i) identifying the current and anticipated skills and knowledge required by successful library and information science (LIS) professionals in the age of web 2.0 (and beyond), (ii) establishing the current state of LIS education in Australia in supporting the development of librarian 2.0, and in doing so, identify models of best practice. The fellowship has contributed to curriculum renewal in the LIS profession. It has helped to ensure that LIS education in Australia continues to meet the changing skills and knowledge requirements of the profession it supports. It has also provided a vehicle through which LIS professionals and LIS educators may find opportunities for greater collaboration and more open communication. This will help bridge the gap between LIS theory and practice and will foster more authentic engagement between LIS education and other parts of the LIS industry in the education of the next generation of professionals. Through this fellowship the LIS discipline has become a role model for other disciplines who will be facing similar issues in the coming years. Eighty-one members of the Australian LIS profession participated in a series of focus groups exploring the current and anticipated skills and knowledge needed by the LIS professional in the web 2.0 world and beyond. Whilst each focus group tended to draw on specific themes of interest to that particular group of people, there was a great deal of common ground. Eight key themes emerged: technology, learning and education, research or evidence-based practice, communication, collaboration and team work, user focus, business savvy and personal traits. It was acknowledged that the need for successful LIS professionals to possess transferable skills and interpersonal attributes was not new. It was noted however that the speed with which things are changing in the web 2.0 world was having a significant impact and that this faster pace is placing a new and unexpected emphasis on the transferable skills and knowledge. It was also acknowledged that all librarians need to possess these skills, knowledge and attributes and not just the one or two role models who lead the way. The most interesting finding however was that web 2.0, library 2.0 and librarian 2.0 represented a ‘watershed’ for the LIS profession. Almost all the focus groups spoke about how they are seeing and experiencing a culture change in the profession. Librarian 2.0 requires a ‘different mindset or attitude’. The Levels of Perspective model by Daniel Kim provides one lens by which to view this finding. The focus group findings suggest that we are witnessing a re-awaking of the Australian LIS profession as it begins to move towards the higher levels of Kim’s model (ie mental models, vision). Thirty-six LIS educators participated in telephone interviews aimed at exploring the current state of LIS education in supporting the development of librarian 2.0. Skills and knowledge of LIS professionals in a web 2.0 world that were identified and discussed by the LIS educators mirrored those highlighted in the focus group discussions with LIS professionals. Similarly it was noted that librarian 2.0 needed a focus less on skills and knowledge and more on attitude. However, whilst LIS professionals felt that there was a paradigm shift within the profession. LIS educators did not speak with one voice on this matter with quite a number of the educators suggesting that this might be ‘overstating it a bit’. This study provides evidence for “disparate viewpoints” (Hallam, 2007) between LIS educators and LIS professionals that can have a significant implications for the future of not just LIS professional education specifically but for the profession generally. Library and information science education 2.0: guiding principles and models of best practice 1 Inviting the LIS academics to discuss how their teaching and learning activities support the development of librarian 2.0 was a core part of the interviews conducted. The strategies used and the challenges faced by LIS educators in developing their teaching and learning approaches to support the formation of librarian 2.0 are identified and discussed. A core part of the fellowship was the identification of best practice examples on how LIS educators were developing librarian 2.0. Twelve best practice examples were identified. Each educator was recorded discussing his or her approach to teaching and learning. Videos of these interviews are available via the Fellowship blog at .The LIS educators involved in making the videos felt uncomfortable with the term ‘best practice’. Many acknowledged that there simply seeking to do the best by their students and that there was always room for improvement. For this reason these videos are offered as examples of “great practice”. The videos are a tool for other educators to use, regardless of discipline, in developing their teaching and learning approaches to supporting web 2.0 professionals. It has been argued that the main purpose of professional education is transformation (Dall’ Alba, 2009; Dall’Alba & Barnacle, 2007). As such professional education should focus not just on skills and knowledge acquisition but also on helping students to develop ways of being the professionals in question (ie LIS professionals, teachers, lawyers, engineers).The aim of this fellowship was to establish Guidelines for Library and Information Science Education 2.0 it has however become apparent that at this point in time it is not yet possible to fulfil this aim. The fellowship has clearly identified skills and knowledge needed by the LIS professional in web 2.0 world (and beyond). It has also identified examples of ‘great practice’ by LIS educators as they endeavour to develop LIS professionals who will be successful in a web 20 world. The fellowship however has also shown that the LIS profession is currently undergoing significant attitudinal and conceptual change. Consequently, before a philosophy of LIS education 2.0 can be expressed, the Australian LIS profession must first explore and articulate what it means to be an LIS professional in the 21st century (ie a world of web 2.0 and beyond). In short, the LIS profession in Australia must take stock not of “what we know and can do” but on “who we are becoming” (Dall’Alba, 2009, p 34).