Carbon ceramic electrodes bulk-modified with nanoparticles of ferrocenebutyrate-intercalated Mg-Al layered double hydroxide

Ferrocenebutyrate-intercalated layered double hydroxide (FcLDH) was prepared by the coprecipitation method and characterized by PXRD, FTIR, TEM and elemental analysis. FcLDH nanoparticles in deionized water were deposited onto the surface of graphite powder to yield graphite powder-supported FcLDH, which was subsequently dispersed into methyltrimethoxysilane-derived gels to fabricate surface-renewable, stable, rigid carbon ceramic electrodes containing the electroactive ferrocenyl group. Cyclic voltammetric study revealed that peak currents of the FcLDH-modified electrode were diffusion-con trolled in 0.1 mol l(-1) KCl aqueous solution. In addition, the formal potential of the modified electrode is related to the activity of chloride ion with a Nernst slope of 56 mV per decade.

Cyclization in situ of isoprene polymerization catalyzed by Nd-Al bimetallic complex

Function of chloride and effect of various alkylaluminiums, C1/A1 molar ratio, solvents on cyclization in situ of isoprene polymerization catalyzed by Nd-Al bimetallic complex were studied. The structure of cyclized products was characterized by means of IR and H-1 NMR, The results indicated that in the course of isoprene polymerization with rare earth catalytic system, the function of alkylchloride introduced is terminating cis-polymerization and generating cationic species with alkyl-aluminums to initiate cyclization in situ. Soluble cyclized polyisoprene was obtained with fragments of cyclopolyisoprene.

Co-Cu-Al mixed oxides derived from hydrotalcite-like compound for NO reduction by CO

Various hydrotalcite based catalysts were prepared for catalytic removal of NO (NO reduction by CO). The general formula of hydrotalcite compounds (HTLc) was Co-Cu-Al-HTLc. Precalcination of these materials at 450 degrees C for NO reduction by CO, was necessary for catalytic activity. All catalysts except Co-A1 and Cu-Al have very good activity at lower temperature for NO reduction by CO. All samples were characterized by XRD and BET. The tentative reaction mechanism was also proposed.

Preparation, charactreization, and catalytic properties of Co-M-Al (M = transition metal) mixed oxides derived from hydrotalcite-like compound

Hydrotalcite-like compounds (HTLcs) CoMAlCO3, where M stands for Cr, Mn, Ni, Cu, or Fe, were synthesized by coprecipitation. After calcination at 450 degrees C, they became mixed oxides with spinel-like structure. The mixed oxides were characterized by XRD, BET, chemical analysis and the adsorption of NO. The catalytic decomposition of NO and its reduction by CO were studied over these mixed oxides. The study showed that the catalytic activity for removal of NO, was very high. The reaction mechanism is proposed and the effects of d-electrons of the transition metals on catalytic activity are elucidated.

The effect of preparation conditions on the catalyst Nd(P-507)(3)/H2O/Al(i-Bu)(3) for the polymerization of styrene

The catalyst system neodymium phosphonate Nd(P-507)(3)/H2O/Al(i-Bu)(3) for the polymerization of styrene was examined. Effects of the addition order of the catalyst components, catalyst aging time and aging temperature on the catalyst activity and the polymer characteristics were investigated. The catalyst activity for isospecific polymerization of styrene increases with aging time and reaches the maximum with a catalyst aged for 45 min at 70 degrees C. The aging time that the catalyst needs to reach the highest activity for isospecific polymerization decreases with increasing aging temperature. The preformed catalyst and the in situ catalyst were compared with respect to the kinetic behavior of the styrene polymerization and the polymer characteristics.

Ti-Al系金属间化合物的价电子结构及其合金化行为

由固体和分子经验电子理论(EET)分析了Ti-Al系金属间化合物合金化前后的价电子结构,再计算了该系合金各相的均匀变形因子α和解理能Gc 值,据此分析了合金化对该系金属间化合物脆性的影响。结果表明,常量合金化元素Nb使Ti3Al基合金的α2相无序化,增加了韧的第二相,减弱了Ti-Ti共价键,综合导致α和Gc 值增大,使Ti3Al的脆性有本质改善;微量合金化元素Mn减弱了TiAl基合金的Al-Al共价键,并诱发孪生,使α和Gc 有所提高,在一定程度上降低了TiAl的脆性;TiAl3极低的α和Gc导致恶劣的本征脆性,Mn也难以改变其脆性本质

Nd-Al双金属配合物催化双烯聚合反应动力学

以Nd-Al双金属配合物为催化剂，考察了丁二烯和异戊二烯聚合反应的动力学，得到稳态聚合速率方程式为RP＝K［M］[ND］ｎ（ｎ＝１）；丁二烯比异戊二烯有更大的表观增长速率常数ｋ．这些与聚合体系中是否存在过量的烷基铝无关．对多组分稀土催化剂作用下异戊二烯聚合反应动力学方程中出现较高ｎ值的现象进行了初步的探讨

以水滑石为前体的Mg-Al-M复合氧化物对催化消除NOx的活性

通过H2-TPR，XRD，TG-DTA及比表面积测定等对ＭｇＡｌ水滑石化合物进行了表征，研究了焙烧温度对水滑石物理性质的影响．在此基础上，研究了ＭｇＡｌ水滑石中加入过渡金属（Ｍ）离子后对ＮＯ＋ＣＯ反应的催化活性．结果发现，含有Ｃｕ离子的样品对ＮＯ＋ＣＯ反应有较高的催化活性，并与ＣｏＡｌＭ的催化性能进行了比较

以水滑石类化合物为前体的Co-M-Al(M=过渡金属)复合氧化物对催化消除NO_x活性的研究

以共沉淀法制得的水滑石类化合物为催化剂前体,经焙烧可得到一系列尖晶石类化合物Co-M-Al[M=Cr,Mn,Fe,Ni,Cu;n(Co):n(M):n(Al)=3:1:1].通过XRD,比表面测定,化学分析,NO吸附等方法对其进行表征,测定了此系列催化剂对NO催化还原和催化分解的活性,结果发现此系列催化剂对消除NO具有很高的活性.同时对催化消除NO的机理及过渡金属离子中d轨道电子对催化活性的影响进行了一些探讨.

Ti-Al合金环境脆性机制的电子理论

根据固体与分子经验电子理论(EET)分析计算Ti-Al系金属间化合物及氢和氧影响下各相的价电子结构与解理能Gc，据此分析Ti-Al系金属间化合物的环境脆性(EE)．结果表明，Ti3Al的氢脆是由于高氢含量下易生成性相引起的；TiAl的氢脆是由于固溶氢减弱含氢TiAl晶胞主干键并降低解理能引起的．而Ti3Al固溶氧使其键结构呈更严重的各向异性，导致Ti3Al脆性加剧；在氧含量较高时，氧化物TiO2形成将导致更加恶劣的脆性，而形成最强键ｎA和热稳定性较高的Al2O3将会有好的抗氧化性．同时也解释一些尚有争议的实验结果，并提出一些解决环境脆性的韧化途径.

稀土对Al-Mg-Si系合金结构和性能的影响

本文用ＸＲＤ和ＳＥＭ方法研究了稀土对Ａｌ－Ｍｇ－Ｓｉ系合金微观结构的影响，同时还测定了这些合金的耐腐蚀及力学性能。结果表明，该体系的稀土铝合金中大约含０．１０％稀土就可以细化组织，提高使用性能。具有很好的应用前景。

The polymerization of methyl methacrylate with a new Nd(O-i-Pr)(3)-Al(i-Bu)(3) catalyst system

Methyl methacrylate (MMA) was polymerized with the rare earth coordination catalyst-system of Nd(O - i-Pr)(3) in toluene. The influences of various ligands in neodymium complexes, molar ratio of Al/Nd, catalyst concentration, catalyst aging time, solvents, the third component CCl4, temperature and time on the polymerization of MMA were studied. The results showed that the polymerization conversion reached more than 80% at a catalyst concentration of 9.2 x 10(-3) mol/L. The appropriate molar ratio of CCl4/Nd was 4. Hydrocarbon was preferred for the polymerzation to obtain a high conversion and a high <(M)over bar w> of PMMA. The H-1 NMR spectra of PMMA indicated that the lower the temperature, the higher the syndiotactic content of PMMA was obtained.

多核Nd-Al双金属配合物对丁二烯的聚合 Ⅳ.烷基铝种类的影响

利用多核Ｎｄ－Ａｌ双金属配合物可单独引发双烯烃聚合的特点，考察了烷基铝种类对丁二烯加聚过程的影响，并与一般混合稀土催化体系进行了比较．烷基铝对活性体催化活性的影响与其用量有关，低ｎ（Ａｌ）／ｎ（Ｎｄ）值时，活性次序为：ＡｌＭｅ３，ＡｌＥｔ３，ＨＡｌＢｕｉ２＞Ａｌ（Ｃ８Ｈ１７）３＞ＡｌＢｕｉ３；高ｎ（Ａｌ）／ｎ（Ｎｄ）值时，活性次序相反：ＡｌＭｅ３，ＡｌＥｔ３，ＨＡｌＢｕｉ２＜Ａｌ（Ｃ８Ｈ１７）３＜ＡｌＢｕｉ３．烷基铝链转移作用强弱次序为：ＨＡｌＢｕｉ２≥ＡｌＥｔ３＞ＡｌＢｕｉ３＞ＡｌＭｅ３＞Ａｌ（Ｃ８Ｈ１７）３．根据聚丁二烯微观结构与其分子量的关系，可将烷基铝对聚丁二烯顺式含量的影响分为３类：（１）ＡｌＥｔ３和Ａｌ（Ｃ８Ｈ１７）３；（２）ＨＡｌ－Ｂｕｉ２和ＡｌＢｕｉ３；（３）ＡｌＭｅ３．所得结果有助于对稀土催化定向聚合过程的深入了解.