Frequency upconversion in rare-earth doped fluoroindate glasses

We present recent results on frequency upconversion (UPC) obtained in fluoroindate glasses (FIG) doped with Ho3+, Tm3+ and Nd3+ ions and codoped with Pr3+/Nd3+ and Yb3+/Tb3+ ions. The results for the Ho3+-doped samples show strong evidence of energy transfer (ET) between Ho3+ ions resonantly excited at 640 nm. The origin of the blue-green upconverted fluorescence observed was identified and the dynamics of the signals revealed the pathways involved in the UPC process. In the case of Tm3+-doped FIG, the samples were resonantly excited at 650 nm and the main mechanism that contributes for the red-to-blue upconversion is excited-state absorption (ESA). The FIG samples codoped with Pr3+/Nd3+ were excited at 588 nm in resonance with transitions starting from the ground state of the Nd 3+ and the Pr3+ ions. It was observed that the presence of Nd3+ ions enhanced the Pr3+ emission at 480 nm by two orders of magnitude. Multiphonon (MP)-assisted upconversion is also discussed for Nd3+-doped FIG pumped at 866 nm. Emission at 750 nm with a peculiar linear dependence with the laser intensity was observed and explained. A rate-equation model that includes MP absorption via thermally coupled electronic excited states of Nd3+ was developed and describes well the experimental results. The role played by effective phonon modes is clearly demonstrated. MP-assisted UPC process was also studied in Yb3+/ Tb3+-codoped FIG samples excited at 1064 nm, which is off-resonance with electronic transitions starting from the ground state. It was determined that the mechanism leading to Tb3+ emission in the blue is due to ET from a pair of excited Yb3+ ions followed by ESA in the Tb 3+ ions. © 2002 Académie des sciences/Éditions scientifiques et médicales Elsevier SAS.

Effect of ceramic surface treatment on the microtensile bond strength between a resin cement and an alumina-based ceramic

Purpose: The objective of this study was to test the following hypothesis: the silica coating on ceramic surface increases the bond strength of resin cement to a ceramic. Materials and Methods: In-Ceram Alumina blocks were made and the ceramic surface was treated: G1 - sandblasting with 110-μm aluminum oxide particles; G2 - Rocatec System: tribochemicai silica coating (Rocatec-Pre powder + Rocatec-Plus powder + Rocatec-Sil); G3 - CoJet System: silica coating (CoJet-Sand) + ESPE-Sil. The ceramic blocks were cemented to composite blocks with Panavia F resin cement (under a load of 750 g/1 min). The cemented blocks were stored in distilled water at 37°C for 7 days and sectioned along the x and y axes with a diamond disk. Samples with an adhesive area of ca 0.8 mm 2 (n = 45) were obtained. The samples were attached to an adapted device for the microtensile test, which was performed in a universal testing machine (EMIC) at a crosshead speed of 1 mm/min. Results: The obtained results were submitted to ANOVA and Tukey's test. Mean values of tensile strength (MPa) and standard deviation values were: (G1) 16.8 ± 3.2; (G2) 30.6 ± 4.5; (G3) 33.0 ± 5.0. G2 and 63 presented greater tensile strength than G1. There was no significant difference between G2 and G3. All the failures took place at the ceramic/resin cement interface. Conclusion: The silica coating (Rocatec or CoJet systems) of the ceramic surface increased the bond strength between the Panavia F resin cement and alumina-based ceramic.

Flow evolution of a metallic slurry during thixoextrusion of an automotive valve

The aim of this work is to characterize a metallic slurry (Al-4.5%Cu) flow during thixoforming of an automotive valve. The necessary globular structure was obtained by first inoculating the alloy with TIBAL (5%Ti, 1%B, Al - rest) at 750.0°C, and then reheating to a state between liquidus and solidus prior to thixoforming. Two metallic slurries, with a solid phase of approximately 86.1 and 78.2 percent, were used to generate different experimental flow patterns during the thixoforming process. The flow of the material into the die was observed for total, and partial displacement (2.7, 5.4, 7.5mm) of the punch. The first displacement shows formation of the valve rod. The patterns at each step of displacement of the punch were preserved by quenching in water, thus revealing the profile of the die fill and microstructural evolution. Degeneration of the globular phase was observed along the piece thixoextruded. Thixoextrusion forces versus time curves were generated for partial and full displacement of the punch. Porosity was visible along the billet prior to thixoforming. However, some areas show that the porosity gradually decreased to zero as the thixoextrusion pressure increased. Turbulent, transient and laminar flow are analyzed in this work.

Energia digestível para larvas de tilápia-do-nilo (oreochromis niloticus) na fase de reversão sexual

This experiment was conducted to evaluate different levels of digestible energy on the performance of Nile tilapia larvae (Oreochromis niloticus) during the sexual reversion phase. Three hundred and seventy-five larvae with initial average length and weight of 21.0±4.0 mg and 1.19±0.72 cm, respectively, were allotted to 25 30L-aquarium. A completely randomized design with five treatments and five replicates was used. The aquarium with 15 larvae was the experimental unit. The diets were formulated to contain levels of 3,300, 3,525, 3,750, 3,975, and 4,200 kcal/kg of digestible energy and to be isoprotein (38.6% digestible protein). The animals were fed ad libitum five times a day. At the end of the experiment, the averages of weight (PF), survival rate (SO), condition factor (FC) and length (CF) were analyzed. Linear reduction of fishes PF and CF, as the dietary digestible energy levels increased, was observed. No differences on fish SO and FC of different treatments were observed. Deleterious effects on performance due to the increasing dietary digestible energy levels were noticed for Nile tilapia larvae during the sexual reversion.

Plutonismn in three orogenic pulses, Eastern Blue Ridge Province, southern Appalachians

The Eastern Blue Ridge Province of the southern Appalachians contains, in part, remnants of an Ordovician accretionary wedge complex formed during subduction of an oceanic tract before mid-Ordovician accretion with Laurentia. The Eastern Blue Ridge Province consists of metapelite and amphibolite intruded by low-K plutons, high-temperature (T >750 °C) Ordovician eclogite, and other high-pressure metamafic and meta-ultramafic rocks. Felsic plutons in the Eastern Blue Ridge Province are important time markers for regional-scale tectonics, deformation, and metamorphism. Plutons were thought to be related to either Taconian (Ordovician) or Acadian (Devonian-Silurian) tectonothermal events. We dated five plutonic or metaplutonic rocks to constrain pluton crystallization ages better and thus the timing of tectonism. The Persimmon Creek gneiss yielded a protolith crystallization age of 455.7 ± 2.1 Ma, Chalk Mountain 377.7 ± 2.5 Ma, Mt. Airy 334 ± 3Ma, Stone Mountain 335.6 ± 1.0 Ma, and Rabun 335.1 ± 2.8 Ma. The latter four plutons were thought to be part of the Acadian Spruce Pine Suite, but instead our new ages indicate that Alleghanian (Carboniferous-Permian) plutonism is widespread and voluminous in the Eastern Blue Ridge Province. The Chattahoochee fault, which was considered an Acadian structure, cuts the Rabun pluton and thus must have been active during the Alleghanian orogeny. The new ages indicate that Persimmon Creek crystallized less than 3 m.y. after zircon crystallization in Eastern Blue Ridge eclogite and is nearly synchronous with nearby high-grade metamorphism and migmatization. The three phases of plutonism in the Eastern Blue Ridge Province correspond with established metamorphic ages for each of the three major orogenic pulses along the western flank of the southern Appalachians. © 2006 Geological Society of America.

Nest site selection and flying capacity of neotropical wasp Angiopolybia pallens (Hymenoptera: Vespidae) in the Atlantic Rain Forest, Bahia State, Brazil

In order to evaluate the flying capacity and nest site selection of Angiopolybia pallens (Lepeletier, 1836), we made 17 incursions (136 hours of sample efforts) in Atlantic Rain Forest environments in Bahia state. Our data show this wasp prefers to nest on wide leaves of bushes and short trees (nests between 0.30 and 3m from the ground) placed in half-shady environments (clearings and shadowed cultivations). The logistic regression model using Quasi-Newton method provided a good description of the flying capacity observed in A. pallens (x 2 = 91.52; p≪0.001). According to the logistic regression model, the A. pallens flight autonomy is low, flying for short distances and with an effective radius of action of about 24m measured from their nests, which means a foraging area of nearly 1,800 m 2.

Evaluation of Ir-based modifiers in the simultaneous determination of As, Bi, Pb, Sb, and Se in milk by graphite furnace atomic absorption spectrometry

Different modifiers (IrCl3, W+IrCl3, Zr+IrCl 3) and coatings (Ir, W-Ir, Zr-Ir) were evaluated for the simultaneous determination of arsenic, bismuth, lead, antimony, and selenium in milk by graphite furnace atomic absorption spectrometry using the 'end-capped' transversely heated graphite atomizer (THGA). Integrated platform, pretreated with Zr-Ir as permanent modifier, was elected as the optimum surface modification resulting in up to 250 firings. Two additional recoatings were possible without significant changes in the analytical performance (750 firings). For 20 μL of matrix-matched standard solutions using diluted (1:10) milk samples, typical correlation coefficients between integrated absorbance and analyte concentration (5.00-20.0 μg/L) was always better than 0.999. The levels of the analytes found in commercial milk samples were lower than the limit of detection: 2.9 μg/L As, 2.9 μg/L Bi, 1.8 μg/L Pb, 1.9 μg/L Sb, and 2.5 μg/L Se. Recoveries were found within the following intervals: 88-114% for As, 89-118% for Bi, 89-113% for Pb, 91-115% for Sb, and 92-115% for Se. The relative standard deviations (n = 12) were ≤2% (As), ≤ 5% (Bi), ≤ 1.4% (Pb), ≤ 3% (Sb), and 5% (Se), and the respective calculated characteristic masses were 54 pg As, 55 pg Bi, 40 pg Pb, 56 pg Sb, and 51 pg Se.

Obesidade e sintomas de depressão, ansiedade e desesperança em mulheres sedentárias e não sedentárias

The aim of this field study was to verify if there is a relation between obesity and symptoms of depression, anxiety and hopelessness in 40 women aged 30,35 on average (± 8,60), divided into two groups: non-sedentary ones, characterized for doing a physical activity at least three times a week for three weeks in a row and sedentary ones, characterized by not practicing any type of regular physical activity when recruited. The method consisted of: objective evaluations of humor, through Beck Inventories of Anxiety (BAI), Depression (BDI) and Hopelessness (BHS) and Physical Evaluation, including total body mass, height, waist and hip circumferences and skin folds thickness. Calculations of the body mass index (BMI), of the waist/hip index (WHI) and of the percentage of corporal fat (%F) were performed in order to evaluate the presence and level of obesity. Results of the analysis of regression to square minimum supported the initial hypothesis concerning the existence of a relation between obesity and psychic symptoms only in sedentary women (BDI/WHI, p=0,035, BDI/BMI, p=0,009, BDI/%G, p=0,019, BAI/BMI, p=0,009, BAI/%G, p=0,037, BHS/WHI, p=0,025, BHS/BMI, p=0,041), once the relation of dependency could not be confirmed in non-sedentary women BDI/WHI, p=0,750, BDI/BMI, p=0,141, BDI/%G, p=0,064, BAI/WHI, p=0,729, BAI/BMI, p=0,384, BAI/%G, p=0,246, BHS/WHI, p=0,491, BHS/BMI, p=0,986, BHS/%G, p=0,322) and the greater the level of obesity, the greater the level of psychic symptoms in both groups. These observations seem to point out that the practice of physical activities was a factor of minimization of presence and intensity of psychic symptoms in non-sedentary women.

Preemptive dexamethasone and etoricoxib for pain and discomfort prevention after periodontal surgery: A double-masked, crossover, controlled clinical trial

Background: Several anti-inflammatory drugs have been used to reduce pain and discomfort after periodontal surgeries. This study evaluates the efficacy of using etoricoxib and dexamethasone for pain prevention after open-flap debridement surgery. Methods: For this prospective, double-masked, crossover, placebo-controlled, randomized clinical trial, open-flap debridement surgeries were performed on 15 patients (eight males and seven females, age range 20 to 56 years: mean age ± SD: 40 ± 9.7 years) who presented with chronic periodontitis after nonsurgical periodontal therapy at three quadrants. Each patient underwent three surgical procedures at intervals of 30 days and received one of the following premedication protocols 1-hour before surgery: group 1 = placebo, group 2 = 8 mg dexamethasone, and group 3 = 120 mg etoricoxib. Rescue medication (750 mg acetaminophen) was given to each patient who was instructed to take it when necessary. Pain intensity and discomfort were evaluated by a 101-point numeric rate scale and a four-point verbal rate scale, respectively, hourly for the first 8 hours after surgery and three times a day on the following 3 days. Results: The results demonstrate that groups 2 and 3 present reduced postoperative pain-intensity levels compared to group 1. There were statistically significant differences at the 4, 5, 6, 7, and 8 hour-periods after surgery (Friedman test; P<0.05). Furthermore, rescue-medication intake was significantly lower for groups 2 and 3 than for group 1 (analysis of variance; P<0.02). Conclusion: The adoption of a preemptive medication protocol using etoricoxib or dexamethasone may be considered effective for pain and discomfort prevention after open-flap debridement surgeries.

Dinâmica de cátions na raiz e folhas de berinjela cultivada sobre doses crescentes de potássio oriundas de duas fontes

This study was conducted at the Department of Plant Production, Sector Horticulture, UNESP - Botucatu, SP, Brazil, in order to assess the dynamics of cationic nutrients in roots and leaves and effects on dry matter production of roots and shoots in eggplant grown on conditions of increasing doses of potassium from two distinct sources (KCl and K 2SO 4). The experiment was arranged in randomized blocks in factorial 2 × 4 (two sources of potassium, KCl and K 2SO 4 and four doses of each source equivalent, 250, 500, 750 and 1000 kg ha -1 K 2O) comprising eight treatments with three replicates. For the experiment we used Oxisol medium texture (615 g of sand, silt 45 g and 340 g clay per kg soil). The characteristics evaluated were: soil electrical conductivity, mass of shoot and root material, content and ratio of K +, Ca 2+ and Mg 2+ in roots and leaves of eggplant. We conclude that excessive doses of sources of K 2O affected the production of dry matter of roots and shoots, as well as electrical conductivity. The accumulation and the relationship of Ca2+/K+, Mg 2+/K + were affected by increased K + concentration; K 2SO 4 was the fertilizer that was less damaging.

Simbiótico e extratos naturais na dieta de codornas Japonesas na fase de postura

The objective of this study was to assess the performance, tonic immobility time (TIT), intensity of injuries (II) and heterophil to lymphocyte ratio (H:L) by the addition of the symbiotic and plant extract (Aloe vera and Symphytum officinale) to the diet of Japanese quails. Ninety quails were used, distributed in randomized blocks with 3 treatments (0-control; 250 and 750 mg symbiotic and plant extract/kg of diet), five repetitions and six birds per cage. Feed intake, feed conversion, production and weight of eggs, viability, TIT, II and H:L were evaluated. Results showed that the addition of the product to the diet did not affect the performance, however, it decreased the TIT, II and the H:L of quails which received the highest level of the product in the diet. Thus, the use of symbiotic and plant extract in the diet has been promising regarding the behavioral and physiological parameters, decreasing the stress of the animals, mainly for the level of 750 mg/kg diet.

Validation of microbiological assay for determination of cefuroxime in injectable preparations

The validation of a microbiological assay, applying agar diffusion method for determination of the active of cefuroxime in power for injection, is described. Using a strain of Micrococcus luteus ATCC 9341 as the test organism, cefuroxime was measured in concentrations ranging from 30.0 to 120.0 μg/mL. The method validation showed that it is linear (r = 0.9999), precise (relative standard deviation = 0.37%) and accurate (it measured the added quantities). Microbiological assay is satisfactory for quantitation of cefuroxime in powder for injection and the validity of the proposed bioassay, which is a simple and a useful alternative methodology for cefuroxime determination in routine quality control.

Desiccation tolerance in seeds of Annona emarginata (Schldtl.) H. Rainer and action of plant growth regulators on germination

Annona emarginata (Schldtl.) H. Rainer (araticum-de-terra-fria) is used as a rootstock for several species of Annonaceae. It is suggested that these seeds should be sown immediately after extraction and, therefore, they could be intolerant to desiccation. There are several mechanisms involved with desiccation tolerance. Soluble sugars, for example, can accumulate and act as osmoprotectants for the membrane system during desiccation. The aim of this study is to assess desiccation tolerance in A. emarginata seeds. In addition, we examined the soluble sugars involved in desiccation tolerance. Finally, we determined the effect of gibberellic acid (GA4+7) and N-(phenylmethyl)-aminopurine in promoting the germination of seeds with different water contents. The experiment consisted of a randomized 4×5 factorial design (desiccation levels × concentration of growth regulators). After drying, seeds containing 31 (control), 19, 12 and 5% water were incubated in different concentrations of GA4+7 N-(phenylmethyl)-aminopurine (0, 250, 500, 750 and 1000 mg L-1) for 60 hours. The experiment was conducted in a germination chamber with alternating temperature and photoperiod of 20oC for 18 hours of darkness and 30oC for 6 hours of light. We analyzed electrical conductivity, germination rate, mean germination time, germination speed, frequency and uniformity of germination, percentage of dormant seeds and soluble sugar profile in intact seeds through high-performance liquid chromatography (HPLC). The data were subjected to analysis of variance, and the means were compared using Tukey's test at a threshold of p<0.05. The results showed that seeds of A. emarginata appears to be desiccation tolerant and, also, that sucrose increases when seed water content is reduced to values as low as 12%, exogenous GA4+7+N-(phenylmethyl)-aminopurine improves its germinability.

La política fiscal en Bolivia y su relación con la política económica: 1986-1990

Incluye Bibliografía

Perfilhamento do trigo em função da aplicação de regulador vegetal

Tillers survival and yield potential are genetically determined and strongly influenced by environmental conditions during the emission and establishment stage. This experiment was carried in order to study effects of application of growth regulator (Ax+GA+CK) on tiller survival and yield potential of wheat. The experiment was carried out from March to July 2010. A 2 × 2 factorial randomized block design with five replications was used. Two wheat cultivars (IAC 370 and IAC 375) and application or not of Ax+GA+CK at the beginning of tillering stage were evaluated. Tiller emission were evaluated at five ages (19, 26, 33, 40 e 47 days after emergence) and yield components were determined by each individual structure evaluation, comparing to the main stem. Growth regulator application improved the tiller survival when emitted in the first week after application. Tiller yield potential decreased in late emission periods of tillers in both cultivars tested, influenced by different traits of each cultivar. IAC 370 showed higher tiller emission, however, the number of viable tillers were higher for the IAC 375.