Solving MIN UR problem by triangle evolution algorithm with archiving and niche techniques

In this paper, as an extension of minimum unsatisfied linear relations problem (MIN ULR), the minimum unsatisfied relations (MIN UR) problem is investigated. A triangle evolution algorithm with archiving and niche techniques is proposed for MIN UR problem. Different with algorithms in literature, it solves MIN problem directly, rather than transforming it into many sub-problems. The proposed algorithm is also applicable for the special case of MIN UR, in which it involves some mandatory relations. Numerical results show that the algorithm is effective for MIN UR problem and it outperforms Sadegh's algorithm in sense of the resulted minimum inconsistency number, even though the test problems are linear.

INVESTIGATING A NEAR-BED SUBMARINE PIPELINE IN A CURRENT

This paper considers the lift forces acting on a pipeline with a small gap between the pipeline and the plane bottom or scoring bottom. A more reasonable fluid force on the pipeline has been obtained by applying the knowledge of modified potential theory (MPT), which includes the influences of the downstream wake. By finite element method, an iteration procedure is used to solve problems of the nonlinear fluid-structure interaction. Comparing the deflection and the stress distributions with the difference sea bottoms, the failure patterns of a spanning pipeline have been discussed. The results are essential for engineers to assess pipeline stability.

2-C-支链-1,6-脱水吡喃葡萄糖的开环反应及吡喃烯糖的合成研究

在糖化学合成中，1,6-脱水吡喃糖不仅是合成具有生物活性低聚糖、糖共体、抗原、抗体以及天然产物等化合物重要原料，而且还是许多具有生物活性的天然产物的结构单元。同时，它还具有[3,2,1]的双环缩醛结构，使其在糖化学合成中具有高的立体选择性和区域选择性，同时减少了C-1 和C-6 位的保护和去保护的优点。此外，环内的缩醛开环后，又可以相应地在C-1 和C-6 位进行官能团转化以及糖苷化反应。 本文报道了一种新的1,6-脱水吡喃糖的合成方法，并设计合成了2-C-支链-1,6-脱水吡喃葡萄糖1-195、1-197、1-198 以及2-C-支链-6-硫代1,6-脱水吡喃葡萄糖1-225。到目前为止，1,6-脱水糖开环并进行糖苷化反应，存在选择性较差、产率低的缺点。我们发现，在乙腈做溶剂的条件下，NiCl5 能高立体选择性高产率地催化化合物1-195、1-197、1-198 开环并与ROH、RSH 发生糖苷化反应。在NiCl5-乙腈条件下，合成了一系列2-C-支链-α-糖苷和2-C-支链-β-硫代糖苷，并对2-C-支链1,6-脱水吡喃葡萄糖的生成机理以及开环机理进行了探讨。 烯糖在糖化学合成中是重要的起始原料，从Fischer 首次合成烯糖至今，一直不断地有新的合成方法出现。但目前文献报道的方法存在所用试剂有毒、价格贵和操作繁琐等缺点。我们对Fischer-Zach 方法进行了改进， 发现Zn-NaH2PO4-H2O 和Zn-PEG600-H2O 体系都能很好地合成烯糖。该方法具有条件温和、绿色环保、操作简单的优点。在Zn-NaH2PO4 溶液或Zn-PEG600 条件下，以溴代糖为原料，高产率地合成一系列的烯糖。 The 1,6-anhydrohexopyranoses are crucial subunits of myriad bioactive nature products, as well as important syntons of carbohydrate chemistry which have been extensively used to prepare the biologically potential oligosaccharides, glycoconjugates, antibiotics, and structurally varied nature products. Their particular [3.2.1] bicyclic skeleton makes them have high regio- and stereo-control in a variety of reactions, and such structure avoids protecting hydroxyl groups at C1 and C6.Additionally, the cleavage of the internal acetal under acidic conditions could be beneficial for further transformations of functional group and glycosylation of the corresponding pyranosyl sugar at the C6 or C1 site. Herein we developed a novel approach to prepare the 1,6-anhydrohexopyranose, and synthesized the 2-C-branched-1,6-anhydrohexopyranose 1-195, 1-197, 1-198 and 2-C-branched-6-thio-1,6-anhydrohexopyranose 1-225. Until now, glycosylation of 1,6-anhydrohexopyranoses has been limited because of the low yields and low stereoselectivity. In this paper, we found that NiCl5-MeCN system could selectively cleave the ring of 1,6-anhydrohexopyranoses with alcohols and thiols at room temperature in high yields. A series of 2-C-branched-α-glycosides and 2-C-branched-β-thioglycosides have been synthesized via NiCl5-catalyzed. Furthermore, we investigated the formation and ring-opening mechanism of 2-C-acetylmethyl-1,6-anhydrohexopyranose. Glycals are significant starting material in carbohydrate chemistry. After the Fischer-Zach method for forming glucal was reported for the first time, the numerous synthetic methods for glycals have been explored. However, there are several drawbacks in the existing methods, such as the usage of very expensive and toxic reagents, intricate operation, and the influence of acid-sensitive and base-sensitive functional group. We improved the Fischer-Zach method and developed a facile, mild and environmentally benign methodology towards the synthesis of the glycals in Zn-NaH2PO4-H2O or Zn-PEG600-H2O system. Our method involves the treatment of glycosyl bromides with Zn in NaH2PO4 aqueous solution or PEG600-H2O at room temperature, affording various glycals in excellent yields.

超对称电磁相互作用系统的BRST量子化及其正则Ward恒等式

运用Becchi-Rouet-Stora-Tyutin路径积分量子化方法对超对称电磁相互作用系统进行了量子化.在相空间中化简了超对称电磁相互作用系统Hamiltonian量,进而使该系统的量子化被化简.构造体系的BRST生成元,得到了系统的BRST变换;给出了有效作用量,得到了Green函数生成泛函;构造了体系的规范生产元,并得到了系统的规范对称变换.最后,基于正则系统的Noether定理,给出了规范变换的Ward-Takahashi恒等式,进而讨论了正规顶角和传播子的关系,给出了正规顶角和传播子的两个关系式.

类氦铀离子的双电子激发态辐射衰变特性

讨论了类氢铀离子与H2分子碰撞中,经KLL共振转移和激发过程形成类氦铀离子双电子激发态的机制,分析了实验测量到的X射线能谱和各种竞争过程对X射线能谱的贡献。对由于纯电子电子相互作用形成的双激发态的Kα辐射衰变的超级卫星线的角分布测量结果表明,角分布呈各向异性,电子态布居存在很强的定向排列。

重离子治癌中剂量分布均匀度对肿瘤控制率的影响

为了把握重离子治癌中剂量分布的不均匀性对疗效的影响 ,我们研究了肿瘤控制率随剂量分布均匀度的变化。受不均匀重离子照射野照射时的细胞存活率理论与肿瘤控制率理论相结合 ,计算了一个假设肿瘤模型在不均匀剂量分布条件下的肿瘤控制率。结果表明 :在相同的总剂量照射下 ,剂量分布均匀度越差肿瘤控制率越低。因此 ,在实际的治疗中 ,剂量分布均匀度应尽可能好于 95 %。

Simulation of the Lanzhou Penning Trap LPT

The LPT (Lanzhou Penning Trap) is under construction and its task is to perforin direct mass measurement of fusion-evaporation residue, and if possible for heavy isotopes. Detailed simulations have been clone for a good understanding to the ion's movement and mechanics in the trap. The optimizal ion of the LPT is also performed based on the simulation. With a scale of 0.5 mm per grid used in the, simulation and many other limitations a highest mass resolution has been achieved to be 1.9 x 10(-5). An unexpected behavioin in the simulation related to magnetron motion has been found.

The influence of fractionation on cell survival and premature differentiation after carbon ion irradiation

Carbon ion radiotherapy/Fractionated irradiation/R-BE/Premature terminal differentiation. To investigate the influence of fractionation on cell survival and radiation induced premature differentiation as markers for early and late effects after X-rays and carbon irradiation. Normal human fibroblasts NHDF, AG1522B and WI-38 were irradiated With 250 kV X-rays, or 266 MeV/u, 195 MeV/u and I I MeV/u carbon ions. Cytotoxicity was measured by a clonogenic survival assay or by determination of the differentiation pattern. Experiments with high-energy carbon ions show that fractionation induced repair effects are similar to photon irradiation. The RBE10 values for clonogenic survival are 1.3 and 1.6 for irradiation in one or two fractions for NHDF cells and around 1.2 for AG1522B cells regardless of the fractionation scheme. The RBE for a doubling of post mitotic fibroblasts (PMF) in the population is I for both single and two fractionated irradiation of NHDF cells. Using I I MeV/u carbon ions, no repair effect can be seen in WI-38 cells. The RBE10 for clonogenic survival is 3.2 for single irradiation and 4.9 for two fractionated irradiations. The RBE for a doubling of PMF is 3.1 and 5.0 for single and two fractionated irradiations, respectively. For both cell lines the effects of high-energy carbon ions representing the irradiation of the skin and the normal tissue in the entrance channel are similar to the effects of X-rays. The fractionation effects are maintained. For the lower energy, which is representative for the irradiation of the tumor region. RBE is enhanced for clonogenic survival as well as for premature terminal differentiation. Fractionation effects are not detectable. Consequently, the therapeutic ratio is significantly enhanced by fractionated irradiation with carbon ions.

碳化硅中氦离子辐照缺陷演化及SiCOI薄膜合成的研究

碳化硅是一种宽带隙半导体材料,具有禁带宽度大、击穿电压高、热导率高、电子饱和漂移速度大、介电常数小、抗辐射能力强、化学稳定性好等优良特性,使其在越来越多的领域如航空航天、太空探测、人造卫星、地热勘探、核能仪器、雷达通讯等, 所需要高温、高速、高频、大功率的微电子器件方面倍受青睐,并和氮化镓、金刚石一起被誉为发展前景十分广阔的第三代半导体材料。本论文采用He+离子注入,在SiC衬底一定深度引入纳米气泡/空腔的方法,来增强对氧原子的俘获以增加O原子在RP处局域浓度,使得更利于O与Si的反应,从而促进氧化埋层的形成,以达到降低注入O的剂量而形成优良的氧化物电绝缘层的目的。由于高剂量的O注入会引起表层SiC材料的损伤，该方法有望缓解目前SIMOX技术中O离子高剂量注入引起表层材料的损伤问题，以期获得低成本、低缺陷密度的SiCOI材料。论文主要开展了如下研究：（1）对He+离子高温（600 K）注入6H-SiC中产生的辐照缺陷,以及缺陷在阶梯温度退火的演化行为的特征进行了分析。实验采用100 keV的He+,辐照剂量范围为3.0×1015～3.0×1016 He+/cm2。利用拉曼光谱、室温光致发光谱、红外吸收光谱、沟道卢瑟福背散射谱的特征进行了分析。实验结果表明,离子注入所产生晶格损伤的程度与He+离子注入剂量有关；高温退火使得损伤得到恢复,不同注入剂量造成的晶格损伤需要不同的退火温度才可恢复。高剂量注入的样品在阶梯温度退火条件下呈现出了点缺陷的复合、氦-空位团的产生、氦泡的形核、长大等特性。与室温注入相比,高温注入引入的自退火作用使大部分简单缺陷发生复合,限制了损伤的积累,从而在材料中产生相对较小的损伤。在一定剂量范围内是避免注入层非晶化的一个重要方法,为后续利用氦离子注入空腔掩埋层吸杂或者制备低成本、低缺陷密度的绝缘层上碳化硅(SiCOI)材料提供了可能。 （2）对He的预注入引入的辐照缺陷与随后注入的氧原子的相互作用机理进行了初步分析。实验采用先He后O注入的方法，采用的离子能量为30 keV (He+)，100 keV (O+)；剂量分别为3.0×1016 (He+)、1.0×1017 (O+) ions/cm2。拉曼散射谱结果表明,空腔对氧的吸收主要是通过捕获简单缺陷释放出来的间隙氧原子实现的,进而促进了对氧的吸附,形成硅氧化合物,有利于氧化埋层的形成。紫外-可见吸收谱中的干涉带表明在材料表面下大概198 nm处是损伤层与晶体层的分界面，接近于SRIM2006估算得到的30 keV He+和100 keV O+辐照损伤的深度（He+辐照损伤的深度为195 nm；O+辐照损伤的深度为165 nm）。沟道卢瑟福背散射谱表明，在特定深度（约150 nm）处,样品中形成了接近非晶的埋层。He离子预注入的碳化硅基体由于含有较多的空位,注入的氧在退火过程中从简单缺陷中释放,向空腔层扩散并捕获在空腔层内,使得He离子预先注入形成的空腔层限制了随后O离子注入造成的损伤层的厚度

He喷嘴带传输及X-γ符合测量装置

本文介绍了He喷嘴带传输及X-γ符合测量装置对重缺中子远离核作活性分离鉴别的基本原理和技术路线，以及该装置首次在本所在线完成的实验结果。通过对110 MeV ~(16)O+~(185)Re实验主要反应产物的测量，指定出~(195)Bi，~(196)Bi，~(192)Tl的半衰期分别为3.11 ± 0.30，4.39 ± 0.53和10.8 ± 1.8 Min，与文献报道一致，并根据母子体衰变平衡拐点Tm初步分析了~(195)Pb；在110 MeV ~(16)O+~(142)Nd实验中，首次测量了~(153)Er的EC/β~+衰变，得到其下列四条新γ线：188.6，352.3，400.0，451.6 KeV(±0.3KeV)，并指定其寿命值T_(1/2) = 35.3 ± 1.6 Sec，与文献报道的根据α衰变测得的半衰期36 ± 2 Sec一致