The dynamic behaviour of a buried water pipe and its effect on leak location using acoustic methods

Leakage in buried pipes is one of the main concerns for water companies due to the scarcity of potable water sources. Older metallic pipelines have been replaced by plastic pipes in such systems, which makes it more difficult to locate leaks using acoustics and vibration. This is mainly because of the high attenuation of leak signals caused by the damping in the pipe wall. To investigate acoustic methods in leak location in controlled conditions, a bespoke test rig was constructed in the UK. In this paper, data from this test-rig is used to discuss some issues that arise when using two contemporary correlators. Of particular interest, is the way in which a resonance in the system can have a profound effect on the estimate of the position of the leak depending on the way in which the leak noise signals are processed. © (2013) Trans Tech Publications.

Informe de la Reunión Regional Latinoamericana Preparatoria de la Asamblea Mundial Sobre el Envejecimiento = Report of the Latin American Regional Preparatory Meeting for the World Assembly on Aging

Incluye Bibliografía

El terremoto de enero de 1999 en Colombia: impacto socioeconómico del desastre en la zona del eje cafetero

Incluye Bibliografía

Las barreras no arancelarias a las exportaciones latinoamericanas en la Comunidad Económica Europea, los Estados Unidos de América y el Japón

Incluye Bibliografía

Estudio sobre la autonomía económica de las mujeres en Costa Rica, El Salvador y Panamá

El presente estudio tiene como fin conocer los avances en materia de leyes y de política pública a partir de la firma de los Acuerdos de compromiso elaborados por los gobiernos de Costa Rica, El Salvador y Panamá en el tema de la autonomía económica de las mujeres en los primeros meses de 2014. Se busca analizar el resultado de las experiencias en estos países, detectar los avances y los desafíos, y a partir de este diagnóstico brindar propuestas de política pública que coadyuven a fortalecer el avance en la autonomía económica de las mujeres.

Characterization of cowpea genotype resistance to Callosobruchus maculatus

The objective of this work was to characterize the resistance of 50 cowpea (Vigna unguiculata) genotypes to Callosobruchus maculatus. A completely randomized design with five replicates per treatment (genotype) was used. No-choice tests were performed using the 50 cowpea genotypes to evaluate the preference for oviposition and the development of the weevil. The genotypes IT85 F-2687, MN05-841 B-49, MNC99-508-1, MNC99-510-8, TVu 1593, Canapuzinho-1-2, and Sanzi Sambili show non-preference-type resistance (oviposition and feeding). IT81 D-1045 Ereto and IT81 D-1045 Enramador exhibit antibiosis against C. maculatus and descend from resistant genitors, which grants them potential to be used in future crossings to obtain cowpea varieties with higher levels of resistance.

Evaluation of different methods of cooling-lubrication in cylindrical grinding of advanced ceramic dip

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Pure Spinors in AdS and Lie Algebra Cohomology

We show that the BRST cohomology of the massless sector of the Type IIB superstring on AdS(5) x S (5) can be described as the relative cohomology of an infinite-dimensional Lie superalgebra. We explain how the vertex operators of ghost number 1, which correspond to conserved currents, are described in this language. We also give some algebraic description of the ghost number 2 vertices, which appears to be new. We use this algebraic description to clarify the structure of the zero mode sector of the ghost number two states in flat space, and initiate the study of the vertices of the higher ghost number.

Vibration and tipping of agricultural machinery: A reality to be adjusted

The present study aimed to develop a methodology for the collection, transfer, storage and processing of vibration levels emitted in jobs occupied in agricultural machinery. The reason of this work is the study the vibration dose applied to operators of heavy vehicles and its relation to occupational health, linking the still high number of accidents involving farm machinery in relation to overturning (tipping). There is a need for the development and improvement of efficient tools in measuring vibration and tilt machine work, which minimize damage to health and accident risks for operators.

Modeling of multiple cracks in reinforced concrete members using solid finite elements with high aspect ratio

This paper presents a new technique to model interfaces by means of degenerated solid finite elements, i.e., elements with a very high aspect ratio, with the smallest dimension corresponding to the thickness of the interfaces. It is shown that, as the aspect ratio increases, the element strains also increase, approaching the kinematics of the strong discontinuity. A tensile damage constitutive relation between strains and stresses is proposed to describe the nonlinear behavior of the interfaces associated with crack opening. To represent crack propagation, couples of triangular interface elements are introduced in between all regular (bulk) elements of the original mesh. With this technique the analyses can be performed integrally in the context of the continuum mechanics and complex crack patterns involving multiple cracks can be simulated without the need of tracking algorithms. Numerical tests are performed to show the applicability of the proposed technique, studding also aspects related to mesh objectivity.

Modeling the formation and propagation of desiccation cracks in soils

The problem of desiccation cracks in soils has received increasing attention in the last few years, in both experimental investigations and modeling. Experimental research has been mainly focused on the behavior of slurries subjected to drying in plates of different shapes, sizes and thickness. The main objectives of these studies were to learn about the process of crack formation under controlled environmental conditions, and also to better understand the effect of different factors (e.g. soil type, boundary conditions, soil thickness) on the morphology of the crack network. As for the numerical modeling, different approaches have been suggested lately to describe the behavior of drying cracks in soils. One aspect that it is still difficult to describe properly is the crack pattern observed in desiccated soils. This work presents a novel technique to model the behavior of drying soils. The crack patter observed in desiccation tests on circular plates are simulated with the main objective of predicting the effect of soil thickness on crack pattern. Good agreement between experimental results and model prediction are observed.

Modeling field load tests in lateritic unsaturated soil

Many models for unsaturated soil have been developed in the last years, accompanying the development of experimental techniques to deal with such soils. The benchmark of the models for unsaturated soil can be assigned to the Barcelona Basic Model (BBM) now incorporated in some codes such as the CODE_BRIGHT. Most of those models were validated considering limited laboratory test results and not much validation is available considering real field problems. This paper presents modeling results of field plate load tests performed under known suction on a lateritic unsaturated soil. The required input data were taken from laboratory tests performed under suction control. The modeling nicely reproduces field tests allowing appreciating the influence of soil suction on the stress-settlement curve. In addition, wetting induced or collapse settlements were calculated from field tests and were nicely duplicated by the numerical analysis performed.

Porous silica matrix obtained from pyrex class by hydrothermal treatment: Characterization and nature of the porosity

A novel porous silica matrix has been prepared from Pyrex glass, using hydrothermal treatment under saturated-steam condition. This process makes it possible to obtain, in one step, a silica support formed of a homogeneously distributed and interconnected macropore microstructure. The new matrix contains silanol groups that can be used in reactions of surface modification to provide a hybrid material and a selective macrofiltration membrane, and also it can improve chemical inertness. The porous matrix is noncrystalline as obtained and, after thermal treatment at temperatures higher than 950degreesC, exhibits an X-ray pattern characteristic of alpha-cristobalite and low volume contraction. The present samples were characterized by scanning electron microscopy, mercury intrusion porosimetry, nitrogen adsorption-desorption isotherms, infrared spectroscopy, X-ray powder diffractometry, atomic absorption, and high-resolution solid-state nuclear magnetic resonance. The results present a new way of producing a macroporous silica matrix.

Instituições de Ensino Superior na transição para uma sociedade ambientalmente mais sustentável: grandes temas em debate à luz do conceito de sistema de gestão ambiental

Este artigo tem o propósito de examinar os desafios e oportunidades relacionados à implementação de sistemas de gestão ambiental baseados na Norma ISO 14001:2004 nas Instituições de Ensino Superior e como elas podem se adequar aos requisitos para possuir um sistema de gestão ambiental (SGA). O estudo envolve análises sobre as implicações da adoção de sistemas de gestão ambiental por universidades e sobre os aspectos relevantes na adoção de SGAs com base na Norma ISO 14001, como barreiras, benefícios, motivações, práticas e fatores críticos de sucesso. Luzes são lançadas, assim, a um tema de crescente importância (sistemas de gestão ambiental), com foco em objeto analítico ainda pouco analisado do ponto de vista ambiental (Instituições de Ensino Superior).

Quality and safety of pet treats: assessment of the microbial safety and quality of pet treats

The aim of this study was to evaluate the hygienic and sanitary conditions of pettreats from an export industry. The occurrence of Salmonella, enumerated sulfite-reducing Clostridium (SRC), coagulase-positive Staphylococcus (CPS) and total(TC) and thermotolerant coliforms (TTC) was studied. Of the 108 samples ana-lyzed, 22 were contaminated by some microorganism. TC were detected at twosamples (3.5 × 101and 4.5 × 101colony-forming units [cfu]/g), SRC in 19 samples(1.0 × 101to 1.3 × 105cfu/g) and Salmonella spp. at only one sample; CPS andTTC were not detected. These findings indicate the microbiological safety of mostitems, except for a mix of dried bovine offal, with 1.3 × 105cfu/g of SRC, and onemix of dehydrated bovine viscera contaminated with Salmonella. The current pro-duction processes and the food safety management system are adequate to guar-antee the production of microbiologically safe foods, but that some improvementscan still be made with regard to cleaning and disinfection and hygiene training.