Integrating a mobile accessible electronic system into dockside monitoring: How can small-scale fisheries data collection programs transition from paper-based to digital data collection?

Thesis (Master's)--University of Washington, 2016-06

Power management and power flow control with back-to-back converters in a utility connected microgrid

This paper proposes a method for power flow control between utility and microgrid through back-to-back converters, which facilitates desired real and reactive power flow between utility and microgrid. In the proposed control strategy, the system can run in two different modes depending on the power requirement in the microgrid. In mode-1, specified amount of real and reactive power are shared between the utility and the microgrid through the back-to-back converters. Mode-2 is invoked when the power that can be supplied by the DGs in the microgrid reaches its maximum limit. In such a case, the rest of the power demand of the microgrid has to be supplied by the utility. An arrangement between DGs in the microgrid is proposed to achieve load sharing in both grid connected and islanded modes. The back-to-back converters also provide total frequency isolation between the utility and the microgrid. It is shown that the voltage or frequency fluctuation in the utility side has no impact on voltage or power in microgrid side. Proper relay-breaker operation coordination is proposed during fault along with the blocking of the back-to-back converters for seamless resynchronization. Both impedance and motor type loads are considered to verify the system stability. The impact of dc side voltage fluctuation of the DGs and DG tripping on power sharing is also investigated. The efficacy of the proposed control ar-rangement has been validated through simulation for various operating conditions. The model of the microgrid power system is simulated in PSCAD.

Integrating real time positioning systems to improve blind lifting and loading crane operations

Mobile/tower cranes are the most essential forms of construction plant in use in the construction industry but are also the subject of several safety issues. Of these, blind lifting has been found to be one of the most hazardous of crane operations. To improve the situation, a real-time monitoring system that integrates the use of a Global Positioning System (GPS) and Radio Frequency Identification (RFID) is developed. This system aims to identify unauthorized work or entrance of personnel within a pre-defined risk zone by obtaining positioning data of both site workers and the crane. The system alerts to the presence of unauthorized workers within a risk zone——currently defined as 3m from the crane. When this happens, the system suspends the power of the crane and a warning signal is generated to the safety management team. In this way the system assists the safety management team to manage the safety of hundreds of workers simultaneously. An onsite trial with debriefing interviews is presented to illustrate and validate the system in use.

Design led innovation : shifting from smart follower to digital strategy leader in the Australian airport sector

This paper presents and discusses organisational barriers and opportunities arising from the dissemination of design led innovation within a leading Australian airport corporation. This research is part of a greater action research program which aims to integrate design as a strategic capability through design led innovation within Australian businesses. Findings reveal that there is an opportunity to employ the theoretical framework and tools of design led innovation in practice to build collaborative idea generation by involving customers and stakeholders within the proposal of new to world propositions. The iterative gathering of deep customer insights also provided an opportunity to leverage a greater understanding of stakeholders and customers in strengthening continuing business partnerships through co-design. Challenges to the design led approach include resistance to the exploratory nature of gathering deep customer insights, the testing of long held assumptions and market data, and the disruption of an organisational mindset geared toward risk aversion instilled within the aviation industry. The implication from these findings is that design led innovation can provide the critical platform to allow for a business to grow and sustain internal design capabilities necessary to challenge prevailing assumptions about how its business model operates to deliver value to customers and stakeholders alike. The platform of design led innovation also provides an avenue to support a cultural transformation towards anticipating future needs necessary for establishing a position of leadership within the broader economic environment.

Contemporary comment : is it time for Australia to adopt Circles of Support and Accountability (COSA)?

Circles of Support and Accountability (COSA) - an innovative process for reintegrating child sex offenders into the community after a period of incarceration - have not yet been firmly established in any Australian jurisdiction. This is the case despite their widespread use in Canada, the United Kingdom. and parts of the United States of America, and despite a growing body of research evidence that demonstrates their efficacy in reducing recidivism among child sex offenders. This Contemporary Comment outlines the emergence of COSA and the existing evidence in support of COSA. It argues that COSA should be piloted in Australia.

Teaching digital media to digital natives

The majority of today's undergraduate students are 'digital natives'; a generation born into a world shaped by digital technologies. It is important to understand the significance of this when considering how to teach Digital Media to digital natives. This paper examines the analogies to literacy that recur in digital native debates. It argues that if the concept of digital literacy is to be useful, educators must attend to the multiple layers and proficiencies that comprise literacy. Rather than completely dispose of old teaching methods, updated pedagogical practices should integrate analysis and critique with exploratory and creative modes of learning.

Using informative priors in the estimation of mixtures over time with application to aerosol particle size distributions

The issue of using informative priors for estimation of mixtures at multiple time points is examined. Several different informative priors and an independent prior are compared using samples of actual and simulated aerosol particle size distribution (PSD) data. Measurements of aerosol PSDs refer to the concentration of aerosol particles in terms of their size, which is typically multimodal in nature and collected at frequent time intervals. The use of informative priors is found to better identify component parameters at each time point and more clearly establish patterns in the parameters over time. Some caveats to this finding are discussed.

Energy based time equivalent approach to determine the fire resistance ratings of light gauge steel frame walls exposed to realistic design fire curves

Structural fire safety has become one of the key considerations in the design and maintenance of the built infrastructure. Conventionally the fire resistance rating of load bearing Light gauge Steel Frame (LSF) walls is determined based on the standard time-temperature curve given in ISO 834. Recent research has shown that the true fire resistance of building elements exposed to building fires can be less than their fire resistance ratings determined based on standard fire tests. It is questionable whether the standard time-temperature curve truly represents the fuel loads in modern buildings. Therefore an equivalent fire severity approach has been used in the past to obtain fire resistance rating. This is based on the performance of a structural member exposed to a realistic design fire curve in comparison to that of standard fire time-temperature curve. This paper presents the details of research undertaken to develop an energy based time equivalent approach to obtain the fire resistance ratings of LSF walls exposed to realistic design fire curves with respect to standard fire exposure. This approach relates to the amount of energy transferred to the member. The proposed method was used to predict the fire resistance ratings of single and double layer plasterboard lined and externally insulated LSF walls. The predicted fire ratings were compared with the results from finite element analyses and fire design rules for three different wall configurations exposed to both rapid and prolonged fires. The comparison shows that the proposed energy method can be used to obtain the fire resistance ratings of LSF walls in the case of prolonged fires.

Pipeline Analog To Ternary Converter

The paper describes the application of the pipelining principle to the realization of an analogue-to-ternary converter. The circuit shows a considerable saving in hard-ware compared with an earlier proposed circuit. The main hardware components used are analogue comparators, subtractors and the delay elements; hence this method of A/T conversion can operate at a higher sampling frequency.

A dual-slope analogue-to-digital converter for generating polynomials

A new digital polynomial generator using the principle of dual-slope analogue-to-digital conversion is proposed. Techniques for realizing a wide range of integer as well as fractional coefficients to obtain the desired polynomial have been discussed. The suitability of realizing the proposed polynomial generator in integrated circuit form is also indicated.

Structuring time and questioning to achieve tactical awareness in games lessons

Background: A paradigm shift in educational policy to create problem solvers and critical thinkers produced the games concept approach (GCA) in Singapore's Revised Syllabus for Physical Education (1999). A pilot study (2001) conducted on 11 primary school student teachers (STs) using this approach identified time management and questioning as two of the major challenges faced by novice teachers. Purpose: To examine the GCA from three perspectives: structure—lesson form in terms of teacher-time and pupil-time; product—how STs used those time fractions; and process—the nature of their questioning (type, timing, and target). Participants and setting: Forty-nine STs from three different PETE cohorts (two-year diploma, four-year degree, two-year post-graduate diploma) volunteered to participate in the study conducted during the penultimate week of their final practicum in public primary and secondary schools. Intervention: Based on the findings of the pilot study, PETE increased the emphasis on GCA content specific knowledge and pedagogical procedures. To further support STs learning to actualise the GCA, authentic micro-teaching experiences that were closely monitored by faculty were provided in schools nearby. Research design: This is a descriptive study of time-management and questioning strategies implemented by STs on practicum. Each lesson was segmented into a number of sub-categories of teacher-time (organisation, demonstration and closure) and pupil-time (practice time and game time). Questions were categorised as knowledge, technical, tactical or affective. Data collection: Each ST was video-taped teaching a GCA lesson towards the end of their final practicum. The STs individually determined the timing of the data collection and the lesson to be observed. Data analysis: Each lesson was segmented into a number of sub-categories of both teacher- and pupil-time. Duration recording using Noldus software (Observer 4.0) segmented the time management of different lesson components. Questioning was coded in terms of type, timing and target. Separate MANOVAs were used to measure the difference between programmes and levels (primary and secondary) in relation to time-management procedures and questioning strategies. Findings: No differences emerged between the programmes or levels in their time-management or questioning strategies. Using the GCA, STs generated more pupil time (53%) than teacher time (47%). STs at the primary level provided more technical practice, and those in secondary schools more small-sided game play. Most questions (58%) were asked during play or practice but were substantially low-order involving knowledge or recall (76%) and only 6.7% were open-ended or divergent and capable of developing tactical awareness. Conclusions: Although STs are delivering more pupil time (practice and game) than teacher-time, the lesson structure requires further fine-tuning to extend the practice task beyond technical drills. Many questions are being asked to generate knowledge about games but lack sufficient quality to enhance critical thinking and tactical awareness, as the GCA intends.

Project Energise: Using participatory approaches and real time computer prompts to reduce occupational sitting and increase work time physical activity in office workers

Objectives This efficacy study assessed the added impact real time computer prompts had on a participatory approach to reduce occupational sedentary exposure and increase physical activity. Design Quasi-experimental. Methods 57 Australian office workers (mean [SD]; age = 47 [11] years; BMI = 28 [5] kg/m2; 46 men) generated a menu of 20 occupational ‘sit less and move more’ strategies through participatory workshops, and were then tasked with implementing strategies for five months (July–November 2014). During implementation, a sub-sample of workers (n = 24) used a chair sensor/software package (Sitting Pad) that gave real time prompts to interrupt desk sitting. Baseline and intervention sedentary behaviour and physical activity (GENEActiv accelerometer; mean work time percentages), and minutes spent sitting at desks (Sitting Pad; mean total time and longest bout) were compared between non-prompt and prompt workers using a two-way ANOVA. Results Workers spent close to three quarters of their work time sedentary, mostly sitting at desks (mean [SD]; total desk sitting time = 371 [71] min/day; longest bout spent desk sitting = 104 [43] min/day). Intervention effects were four times greater in workers who used real time computer prompts (8% decrease in work time sedentary behaviour and increase in light intensity physical activity; p < 0.01). Respective mean differences between baseline and intervention total time spent sitting at desks, and the longest bout spent desk sitting, were 23 and 32 min/day lower in prompt than in non-prompt workers (p < 0.01). Conclusions In this sample of office workers, real time computer prompts facilitated the impact of a participatory approach on reductions in occupational sedentary exposure, and increases in physical activity.

Terahertz Time Domain Spectroscopy to Detect Low-Frequency Vibrations of Double-Walled Carbon Nanotubes

We have measured the frequency-dependent real index of refraction and extinction coefficient (and hence the complex dielectric function) of a free-standing double-walled carbon nanotube film of thickness 200 nm by using terahertz time domain spectroscopy in the frequency range 0.1 to 2.5 THz. The real index of refraction and extinction coefficient have very high values of approximately 52 and 35, respectively, at 0.1 THz, which decrease at higher frequencies. Two low-frequency phonon modes of the carbon nanotubes at 0.45 and 0.75 THz were clearly observed for the first time in the real and imaginary parts of the complex dielectric function along with a broad resonance centred at around 1.45 THz, the latter being similar to that in single-walled carbon nanotubes assigned to electronic excitations. Our experiments bring out a possible application of double-walled carbon nanotube films as a neutral density filter in the THz range.