Somaticell® as a screening method for somatic cell count from bovine milk

Os objetivos do presente estudo foram avaliar a correlação entre a contagem eletrônica de células somáticas (eCCS) com o Somaticell® sob diferentes níveis de contagem de células somáticas (CCS) do leite e patógenos causadores de mastites, além de calcular a sensibilidade, especificidade e valores preditivos do Somaticell® utilizando diferentes limites de CCS estabelecidos pelos diferentes países. Trezentos e quarenta amostras de leite foram coletadas assepticamente após realização do California Mastitis Test (CMT). O Somaticell® e a eCCS foram realizados em todas as amostras de leite. A correlação entre o Somaticell® e a contagem eletrônica foi determinada de acordo com o CMT, patógeno isolado e escore de eCCS. de acordo com os escores de CCS estabelecidos, 26,5% das amostras de leite apresentaram escore 1 (69-166 x10³células mL-1), 26,8% escore 2 (167-418x10³células mL-1), 27,4% escore 3 (419-760x10³células mL-1) e 19,4% escore 4 (761 to 1970x10³células mL-1). A eCCS e o Somaticell® apresentaram correlação positiva em quase todos os escores estudados (exceto escore 2 e 3). O valor de r obtido entre CCS e o Somaticell® foi de 0,32. Observou-se que, quando o limite de CCS estabelecido aumentou, a sensibilidade decresceu e os valores de especificidade aumentaram. Os valores preditivos apresentaram-se constantes em todos os limites. Quando o limite de CCS era baixo (<760,000 células mL-1), Somaticell® forneceu resultados consistentemente mais elevados que os valores de CCS. Já para amostras com CCS elevada, Somaticell® resultou em menores contagens que a eCCS. A correlação entre os dois métodos permaneceu relativamente constante em todas as condições e os valores de sensibilidade e especificidade do teste são altamente dependentes do limite estabelecido. Os resultados deste trabalho sugerem que o Somaticell® não é útil para avaliar a CCS do leite, pois seus resultados são significativamente diferentes da eCCS, no entanto, pode ser utilizado como método de triagem, tal como o CMT, para a detecção do aumento da CCS do leite.

Avaliação e caracterização da qualidade da carne de peito (Pectoralis major) de matrizes pesadas em final de ciclo produtivo

Este trabalho teve por objetivo avaliar as características da qualidade da carne de matrizes pesadas de descarte. Para isto, foram coletadas 40 amostras de filés de peito (Pectoralis major) de matrizes da linhagem Ross com 68 e 69 semanas de idade. As coletas foram divididas em duas, com 20 amostras coletadas em cada uma delas. No tempo zero (após o resfriamento) foi medido o pH e coletados fragmentos para a avaliação do valor R. Nos tempos 4 e 24 horas post-mortem, foram feitas as seguintes análises: pH, valor R, cor objetiva, perda por exsudação (drip loss), capacidade de retenção de água (CRA), capacidade de absorção de água (CAA), perdas de peso por cozimento (PPC) e força de cisalhamento (FC). Houve diferença (p < 0,05) para os valores médios de pH entre os tempos zero (após o resfriamento), 4 e 24 horas que foram de 6,49; 5,78; e 5,65, respectivamente. O resultado médio encontrado para CRA foi de 26,45. Para a cor objetiva, os resultados médios para o L*, a* e b* foram de 52,20; 3,64; 0,51, respectivamente. Portanto, conclui-se que, quando observados os resultados das análises para os parâmetros perda por exsudato, perda de peso por cozimento e capacidade de absorção de água, a carne de peito das matrizes pesadas apresenta ótima qualidade tecnológica apesar de apresentar problemas na sua textura.

Importantes características de chuva para a conservação do solo e da água no município de São Manuel (SP)

Os modelos matemáticos preditivos da erosão do solo, como a Equação Universal de Perda de Solo (EUPS), são de muita valia no planejamento de uso agrícola da terra. Tal equação, desenvolvida para estimar as perdas médias anuais de solo esperadas em dado local, para determinado sistema de manejo, apresenta como variáveis os fatores erosividade da chuva (R), erodibilidade do solo (K), comprimento do declive (L), grau do declive (S), cobertura e manejo (C) e práticas conservacionistas de suporte (P). Com o objetivo de contribuir para o planejamento conservacionista de uso do solo local, foi estimado, de forma simplificada, o fator erosividade da chuva (R) da EUPS para o município de São Manuel (SP), para uma série pluviométrica contínua de 49 anos de dados de chuva diária. Além disso, foram também calculados o período de retorno, a freqüência de ocorrência dos índices de erosividade anuais e as quantidades máximas diárias das chuvas necessárias para o dimensionamento mais adequado de canais de terraços agrícolas em nível. O valor calculado do fator R foi de 7.487 MJ mm ha-1 h-1 ano-1, esperado ocorrer no local, pelo menos, uma vez a cada 2,33 anos, com uma probabilidade de 42,92 %. Observou-se uma concentração de 81,48 % do valor total deste fator no semestre de outubro a março, indicando que, potencialmente, as maiores perdas anuais de solo por erosão são esperadas neste período. Os valores anuais do índice EI30, esperados para os períodos de retorno de 2, 5, 10, 20, 50 e 100 anos, foram de 7.216, 8.675, 9.641, 10.568, 11.768 e 12.667 MJ mm ha-1 h-1 ano-1, respectivamente. Com relação às quantidades máximas de chuva diária, para os mesmos períodos de retorno, os valores foram de 73, 98, 115, 131, 151 e 167 mm, respectivamente.

Qualidade físico-química e sensorial da carne de peito de matrizes pesadas de descarte

O objetivo do presente trabalho foi avaliar as características de qualidade: pH, cor, valor R, perda por exsudação, capacidade de retenção e absorção de água, capacidade de emulsificação, perdas por cocção, força de cisalhamento e análise sensorial da carne de matrizes pesadas de descarte de frangos de corte. A carne de peito de matrizes apresentou valores médios do parâmetro pH, valor R, perda por exsudação e valor de L* de 5,70, 1,43, 2,00 e 50,11, respectivamente. Para a capacidade de retenção e absorção de água, perda de peso por cozimento e força de cisalhamento, os valores médios foram de 77, 58, 18% e 4,94kgf cm-2, respectivamente. Na análise sensorial, a carne de matriz apresentou baixa intensidade de maciez (6,9) e menor suculência (3,4) e foi a mais elástica, borrachenta e difícil de deglutir. A carne de matrizes pesadas de descarte apresenta boas características de qualidade tecnológicas que possibilitam sua utilização como matéria-prima para a elaboração de industrializados.

X charts with supplementary samples to control the mean and variance

A standard X chart for controlling a process takes regular individual observations, for instance every half hour. This article proposes a modification of the X chart that allows one to take supplementary samples. The supplementary sample is taken (and the (X) over bar and R values computed) when the current value of X falls outside the control limits. With the supplementary sample, the signal of out-of-control is given by an (X) over bar value outside the (X) over bar chart's control limits or an R value outside the R chart's control limit. The proposed chart is designed to hold the supplementary sample frequency, during the in-control period, as low as 5% or less. In this context, the practitioner might prefer to verify an out-of-control condition by simply comparing the (X) over bar and R values with the control limits. In other words, without plotting the (X) over bar and R points. The X chart with supplementary samples has two major advantages when compared with the standard (X) over bar and A charts: (a) the user will be plotting X values instead of (X) over bar and R values; (b) the shifts in the process mean and/or changes in the process variance are detected faster.

The no-central chi-square chart with two-stage samplings

Throughout this article, it is assumed that the no-central chi-square chart with two stage samplings (TSS Chisquare chart) is employed to monitor a process where the observations from the quality characteristic of interest X are independent and identically normally distributed with mean μ and variance σ2. The process is considered to start with the mean and the variance on target (μ = μ0; σ2 = σ0 2), but at some random time in the future an assignable cause shifts the mean from μ0 to μ1 = μ0 ± δσ0, δ >0 and/or increases the variance from σ0 2 to σ1 2 = γ2σ0 2, γ > 1. Before the assignable cause occurrence, the process is considered to be in a state of statistical control (defined by the in-control state). Similar to the Shewhart charts, samples of size n 0+ 1 are taken from the process at regular time intervals. The samplings are performed in two stages. At the first stage, the first item of the i-th sample is inspected. If its X value, say Xil, is close to the target value (|Xil-μ0|< w0σ 0, w0>0), then the sampling is interrupted. Otherwise, at the second stage, the remaining n0 items are inspected and the following statistic is computed. Wt = Σj=2n 0+1(Xij - μ0 + ξiσ 0)2 i = 1,2 Let d be a positive constant then ξ, =d if Xil > 0 ; otherwise ξi =-d. A signal is given at sample i if |Xil-μ0| > w0σ 0 and W1 > knia:tl, where kChi is the factor used in determining the upper control limit for the non-central chi-square chart. If devices such as go and no-go gauges can be considered, then measurements are not required except when the sampling goes to the second stage. Let P be the probability of deciding that the process is in control and P 1, i=1,2, be the probability of deciding that the process is in control at stage / of the sampling procedure. Thus P = P1 + P 2 - P1P2, P1 = Pr[μ0 - w0σ0 ≤ X ≤ μ0+ w 0σ0] P2=Pr[W ≤ kChi σ0 2], (3) During the in-control period, W / σ0 2 is distributed as a non-central chi-square distribution with n0 degrees of freedom and a non-centrality parameter λ0 = n0d2, i.e. W / σ0 2 - xn0 22 (λ0) During the out-of-control period, W / σ1 2 is distributed as a non-central chi-square distribution with n0 degrees of freedom and a non-centrality parameter λ1 = n0(δ + ξ)2 / γ2 The effectiveness of a control chart in detecting a process change can be measured by the average run length (ARL), which is the speed with which a control chart detects process shifts. The ARL for the proposed chart is easily determined because in this case, the number of samples before a signal is a geometrically distributed random variable with parameter 1-P, that is, ARL = I /(1-P). It is shown that the performance of the proposed chart is better than the joint X̄ and R charts, Furthermore, if the TSS Chi-square chart is used for monitoring diameters, volumes, weights, etc., then appropriate devices, such as go-no-go gauges can be used to decide if the sampling should go to the second stage or not. When the process is stable, and the joint X̄ and R charts are in use, the monitoring becomes monotonous because rarely an X̄ or R value fall outside the control limits. The natural consequence is the user to pay less and less attention to the steps required to obtain the X̄ and R value. In some cases, this lack of attention can result in serious mistakes. The TSS Chi-square chart has the advantage that most of the samplings are interrupted, consequently, most of the time the user will be working with attributes. Our experience shows that the inspection of one item by attribute is much less monotonous than measuring four or five items at each sampling.

Impacto do estresse térmico agudo na qualidade física e química da carne e avaliação microbiológica de frangos de corte

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Qualidade da carne de matriz pesada em final de ciclo de produção e tecnicas de agregação de valor

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Métodos de avaliação do estado nutricional para o algodoeiro no centro-oeste do Brasil

Pós-graduação em Agronomia (Produção Vegetal) - FCAV

Estudo do efeito do processo de shot peening na taxa de propagação de trinca por fadiga na liga aeronáutica 2024 - T3

Pós-graduação em Engenharia Mecânica - FEG

Surface coverage in wireless sensor networks based on delaunay tetrahedralization

In this work is presented a new method for sensor deployment on 3D surfaces. The method was structured on different steps. The first one aimed discretizes the relief of interest with Delaunay algorithm. The tetrahedra and relative values (spatial coordinates of each vertex and faces) were input to construction of 3D Voronoi diagram. Each circumcenter was calculated as a candidate position for a sensor node: the corresponding circular coverage area was calculated based on a radius r. The r value can be adjusted to simulate different kinds of sensors. The Dijkstra algorithm and a selection method were applied to eliminate candidate positions with overlapped coverage areas or beyond of surface of interest. Performance evaluations measures were defined using coverage area and communication as criteria. The results were relevant, once the mean coverage rate achieved on three different surfaces were among 91% and 100%.

Relating Bike Racks and Bike Ridership

Abstract The purpose of this thesis was to investigate the relationship between bicycle ridership and bike racks in a given area. The goal was to discern whether or not the density of bike racks determines the number of riders in the area. I predicted that there would be higher ridership in the areas with a denser bike rack concentration. To investigate this point, I set up five different areas of varying sizes with a similar number of bike racks, and then observed them over a period of 5 business days. By using a simple tally of the bikes found on the racks and bikes locked to other objects, like railings, I collected data in the area during the day when there were likely to be many commuter bikes parked outside. The results show that there is a positive relationship between the density of bike racks in a given area and bike ridership. While there is a positive r-value, more data collection needs to be done to determine the relationship that may exist between bike ridership and bike racks.

Correlation of the Physicochemical and Structural Properties of pDNA/Cationic Liposome Complexes with Their in Vitro Transfection

In this study, we characterized the conventional physicochemical properties of the complexes formed by plasmid DNA (pDNA) and cationic liposomes (CL) composed of egg phosphatidylcholine (EPC), 1,2-dioleoyl-sn-glycero-3-phosphoethanolamine (DOPE), and 1,2-dioleoyl-3-trimethylammonium-propane (DOTAP) (50/25/25% molar ratio). We found that these properties are nearly unaffected at the studied ranges when the molar charge ratio (R-+/-) between the positive charge from the CL and negative charge from pDNA is not close to the isoneutrality region (R-+/- = 1). However, the results from in vitro transfection of HeLa cells showed important differences when R-+/- is varied, indicating that the relationships between the physicochemical and biological characteristics were not completely elucidated. To obtain information regarding possible liposome structural modifications, small-angle X-ray scattering (SAXS) experiments were performed as a function of R-+/- to obtain correlations between structural, physicochemical, and transfection properties. The SAXS results revealed that pDNA/CL complexes can be described as being composed of single bilayers, double bilayers, and multiple bilayers, depending on the R-+/- value. Interestingly, for R-+/- = 9, 6, and 3, the system is composed of single and double bilayers, and the fraction of the latter increases with the amount of DNA (or a decreasing R-+/-) in the system. This information is used to explain the transfection differences observed at an R-+/- = 9 as compared to R-+/- = 3 and 6. Close to the isoneutrality region (R-+/- = 1.8), there was an excess of pDNA, which induced the formation of a fraction of aggregates with multiple bilayers. These aggregates likely provide additional resistance against the release of pDNA during the transfection phenomenon, reflected as a decrease in the transfection level. The obtained results permitted proper correlation of the physicochemical and structural properties of pDNA/CL complexes with the in vitro transfection of HeLa cells by these complexes, contributing to a better understanding of the gene delivery process.

The influence of the degree of back-mixing on hydrogen production in an anaerobic fixed-bed reactor

This paper reports on results obtained from experiments carried out in an acidogenic anaerobic reactor aiming at the optimization of hydrogen production by altering the degree of back-mixing. It was hypothesized that there is an optimum operating point that maximizes the hydrogen yield. Experiments were performed in a packed-bed bioreactor by covering a broad range of recycle ratios (R) and the optimum point was obtained for an R value of 0.6. In this operating condition the reactor behaved as 8 continuous stirred-tank reactors in series and the maximum yield was 4.22 mol H-2 mol sucrose(-1). Such optimum point was estimated by deriving a polynomial function fitted to experimental data and it was obtained as the conjugation of three factors related to the various degrees of back-mixing applied to the reactor: mass transfer from the bulk liquid to the biocatalyst, liquid-to-gas mass transfer and the kinetic behavior of irreversible reactions in series. Copyright (C) 2012, Hydrogen Energy Publications, LLC. Published by Elsevier Ltd. All rights reserved.

Different protocols to produce artificial dentine carious lesions in vitro and in situ: hardness and mineral content correlation

This study compared dentine demineralization induced by in vitro and in situ models, and correlated dentine surface hardness (SH), cross-sectional hardness (CSH) and mineral content by transverse microradiography (TMR). Bovine dentine specimens (n = 15/group) were demineralized in vitro with the following: MC gel (6% carboxymethylcellulose gel and 0.1 m lactic acid, pH 5.0, 14 days); buffer I (0.05 m acetic acid solution with calcium, phosphate and fluoride, pH 4.5, 7 days); buffer II (0.05 m acetic acid solution with calcium and phosphate, pH 5.0, 7 days), and TEMDP (0.05 m lactic acid with calcium, phosphate and tetraethyl methyl diphosphonate, pH 5.0, 7 days). In an in situ study, 11 volunteers wore palatal appliances containing 2 bovine dentine specimens, protected with a plastic mesh to allow biofilm development. The volunteers dripped a 20% sucrose solution on each specimen 4 times a day for 14 days. In vitro and in situ lesions were analyzed using TMR and statistically compared by ANOVA. TMR and CSH/SH were submitted to regression and correlation analysis (p < 0.05). The in situ model produced a deep lesion with a high R value, but with a thin surface layer. Regarding the in vitro models, MC gel produced only a shallow lesion, while buffers I and II as well as TEMDP induced a pronounced subsurface lesion with deep demineralization. The relationship between CSH and TMR was weak and not linear. The artificial dentine carious lesions induced by the different models differed significantly, which in turn might influence further de- and remineralization processes. Hardness analysis should not be interpreted with respect to dentine mineral loss