Emission: a simple new technique to correct rainfall estimates from attenuation due to both the radome and heavy rainfall

We present a new technique for correcting errors in radar estimates of rainfall due to attenuation which is based on the fact that any attenuating target will itself emit, and that this emission can be detected by the increased noise level in the radar receiver. The technique is being installed on the UK operational network, and for the first time, allows radome attenuation to be monitored using the increased noise at the higher beam elevations. This attenuation has a large azimuthal dependence but for an old radome can be up to 4 dB for rainfall rates of just 2–4 mm/h. This effect has been neglected in the past, but may be responsible for significant errors in rainfall estimates and in radar calibrations using gauges. The extra noise at low radar elevations provides an estimate of the total path integrated attenuation of nearby storms; this total attenuation can then be used as a constraint for gate-by-gate or polarimetric correction algorithms.

A time-series method to identify and correct range sidelobes in meteorological radar data

The use of pulse compression techniques to improve the sensitivity of meteorological radars has become increasingly common in recent years. An unavoidable side-effect of such techniques is the formation of ‘range sidelobes’ which lead to spreading of information across several range gates. These artefacts are particularly troublesome in regions where there is a sharp gradient in the power backscattered to the antenna as a function of range. In this article we present a simple method for identifying and correcting range sidelobe artefacts. We make use of the fact that meteorological targets produce an echo which fluctuates at random, and that this echo, like a fingerprint, is unique to each range gate. By cross-correlating the echo time series from pairs of gates therefore we can identify whether information from one gate has spread into another, and hence flag regions of contamination. In addition we show that the correlation coefficients contain quantitative information about the fraction of power leaked from one range gate to another, and we propose a simple algorithm to correct the corrupted reflectivity profile.

Why the Heyd-Scuseria-Ernzerhof hybrid functional description of VO2 phases is not correct

In contrast with recent claims that the Heyd-Scuseria-Ernzerhof (HSE) screened hybrid functional can provide a good description of the electronic and magnetic structures of VO2 phases [Eyert, Phys. Rev. Lett.PRLTAO0031-900710.1103/PhysRevLett.107.016401 107, 016401 (2011)], we show here that the HSE lowest-energy solutions for both the low-temperature monoclinic (M1) phase and the high-temperature rutile (R) phase, which are obtained upon inclusion of spin polarization, are at odds with experimental observations. For the M1 phase the ground state is (but should not be) magnetic, while the ground state of the R phase, which is also spin polarized, is not (but should be) metallic. The energy difference between the low-temperature and high-temperature phases has strong discrepancies with the experimental latent heat.

Three decades of policy layering and politically sustainable reform in the European Union’s Agricultural Policy

The study of policy reform has tended to focus on single-stage reforms taking place over a relatively short period. Recent research has drawn attention to gradual policy changes unfolding over extended periods. One strategy of gradual change is layering, in which new policy dimensions are introduced by adding new policy instruments or by redesigning existing ones to address new concerns. The limited research on single-stage policy reforms highlights that these may not endure in the postenactment phase when circumstances change. We argue that gradual policy layering may create sustainability dynamics that can result in lasting reform trajectories. The European Union’s Common Agricultural Policy (CAP) has changed substantially over the last three decades in response to emerging policy concerns by adding new layers. This succession of reforms proved durable and resilient to reversal in the lead-up to the 2013 CAP reform when institutional and political circumstances changed.

Fred: An approach to generating real, correct, reusable programs from proofs

In this paper we describe our system for automatically extracting "correct" programs from proofs using a development of the Curry-Howard process. Although program extraction has been developed by many authors, our system has a number of novel features designed to make it very easy to use and as close as possible to ordinary mathematical terminology and practice. These features include 1. the use of Henkin's technique to reduce higher-order logic to many-sorted (first-order) logic; 2. the free use of new rules for induction subject to certain conditions; 3. the extensive use of previously programmed (total, recursive) functions; 4. the use of templates to make the reasoning much closer to normal mathematical proofs and 5. a conceptual distinction between the computational type theory (for representing programs)and the logical type theory (for reasoning about programs). As an example of our system we give a constructive proof of the well known theorem that every graph of even parity, which is non-trivial in the sense that it does not consist of isolated vertices, has a cycle. Given such a graph as input, the extracted program produces a cycle as promised.

Divergências entre o parecer prévio do Tribunal de Contas do Estado (TCE) e o resultado do julgamento das contas anuais de prefeitos em Pernambuco

Este estudo tem como objetivo identificar quais os fundamentos que levam algumas Câmaras Municipais pernambucanas a não acompanhar o parecer prévio do Tribunal de Contas do Estado no julgamento das contas anuais dos prefeitos. Tendo em vista que uma parcela significativa dos julgamentos das contas anuais dos prefeitos realizados pelas Câmaras Municipais não tem acompanhado as recomendações emitidas nos Pareceres Prévios do TCE, inicialmente foram identificadas as abordagens teóricas sobre a estrutura da relação do executivo com o legislativo que oferecem subsídios para o entendimento da face política das Câmaras Municipais nestes julgamentos. Destacou-se também o aspecto técnicoadministrativo viabilizado pelo processo legislativo do julgamento das contas, passível da análise e solicitação de revisão judicial pelo Ministério Público com vistas à anulação, caso não apresente motivação legal formalmente registrada que atenda às disposições constitucionais. O estudo foi realizado por meio de pesquisa bibliográfica, documental e de campo, por meio de entrevistas semiestruturadas com vereadores das Câmaras Municipais pernambucanas. A metodologia qualitativa de análise de conteúdo foi escolhida para a análise dos dados. Os resultados da pesquisa permitiram identificar que os fundamentos que levam algumas Câmaras Municipais pernambucanas a não acompanhar o parecer prévio do Tribunal de Contas no julgamento das contas anuais dos prefeitos não estão formalmente evidenciados no processo legislativo pertinente, cujos documentos oficiais pesquisados não atendem aos requisitos legais de motivação, nem tampouco explicam as razões do não acompanhamento do parecer prévio do TCE. A opinião dos vereadores entrevistados conduz ao entendimento de que tais fundamentos são de natureza política, em detrimento dos fundamentos técnicos, explicados pela relação de preponderância do executivo sobre o poder legislativo municipal.

Use of scrap tire rubber in place of SBS in modified asphalt as an environmentally correct alternative for Brazil

Reusing scrap tires has become a worldwide challenge, especially due to the great difficulty in finding ecologically and economically feasible ways to dispose of them. This has led to the creation of specific programs and legislation for reusing scrap tires. Research has shown that a certain percentage of scrap tire rubber can be added to asphalt compositions, and this has become a worldwide practice. This paper describes the properties of four asphalt compositions modified with scrap tire rubber (STR) prepared in the laboratory. These properties are then compared with those of asphalt modified with styrene butadiene styrene (SBS), a synthetic polymer and one of the most common modifiers, to verify the feasibility of using scrap tire rubber as a substitute for SBS. The scope of this study does not include an analysis of how STR affects end-of-life asphalt. The main findings indicate that STR is a potential substitute of SBS in paving material, and although it does not meet some of the standard specifications when compared with SBS, these issues can be overcome by proper care during storage and transportation. The substitution of SBS by STR also showed the potential for about 10% in expenditure savings. (C) 2012 Elsevier Ltd. All rights reserved.

Incisive Canal Deflation for Correct Implant Placement: Case Report

Aim: This article is a case report of a patient in whom the prosthetic planning indicated the necessity of an incisive canal deflation for the correct installation of all implant that is to be osseointegrated.Case Report. In the reopening phase after the bone graft installation, the incisive canal deflation (biopsy of its content) was done and titanium implants were installed with one of them invading the anatomical space occupied previously by the incisive canal. The biopsy analysis showed fragments of the incisive artery and nerve., which are responsible for the anterior upper-tooth pulp, the periodontium vascularization. and the innervation. Front the anastomosis present along with other structures allied with the absence of teeth in the region, there was no detriment to the patient caused by the deflation.Conclusion: Incisive canal deflation is a viable technique in implantology. It can permit ideal prosthetic planning with no detriment to the patient. (Implant Dent 2009;18:473-479)

An application of neural network technique to correct the dome temperature effects on pyrgeometer measurements

This work describes an application of a multilayer perceptron neural network technique to correct dome emission effects on longwave atmospheric radiation measurements carried out using an Eppley Precision Infrared Radiometer (PIR) pyrgeometer. It is shown that approximately 7-month-long measurements of dome and case temperatures and meteorological variables available in regular surface stations (global solar radiation, air temperature, and air relative humidity) are enough to train the neural network algorithm and correct the observed longwave radiation for dome temperature effects in surface stations with climates similar to that of the city of São Paulo, Brazil. The network was trained using data from 15 October 2003 to 7 January 2004 and verified using data, not present during the network-training period, from 8 January to 30 April 2004. The longwave radiation values generated by the neural network technique were very similar to the values obtained by Fairall et al., assumed here as the reference approach to correct dome emission effects in PIR pyrgeometers. Compared to the empirical approach the neural network technique is less limited to sensor type and time of day (allows nighttime corrections).

The Brazilian pediatric myelodysplastic cooperative group strategies: are they relevant to improve educational approach and correct diagnosis?

Brazil is a wide country with huge contrasts. Its peculiarities can highlight environmental factors that could influence the frequencies of different cancers. The standard treatment and results achieved from several different areas of the country may not be found in others. The establishment of a national cooperative group has the potential to improve outcomes. The The Brazilian Cooperative Group on Pediatric Patients with Myelodysplastic Syndrome (BCG-MDS-PED) was first organized in January 1997 as a working group of hematologists, pediatric oncologists, pediatric-hematologists, molecular biologists and other professionals in order to study pediatric (age < 18 years) MDS. Six distinct subcommittees constituted with members from several universities: cytology, histopathology, clinical, cytogenetics, molecular biology and epidemiology. The goals of the BCG-MDS-PED were: (i) to offer support for diagnosis and orientation for treatment; (ii) educational Support for the colleagues all over the country and (iii) research on pathogenesis and new approaches for pediatric MDS patients. There are socio-economical differences among the five regions of the country. The BCG-MDS-PED believes that it is absolutely necessary to Study the clinical, cellular, molecular and epidemiological aspects of MDS, taking in account these peculiar differences among populations and regions. Since 1997, 114 pediatric cases were referred to the BCG-MDS-PED from 21 centres. Seven Brazilian states have sent cases to the group, 31 patients were referred from universities, 73 patients from pediatric oncology units (foundations) and 10 patients came from private clinics. Some of these patients have been followed up and/or treated by the physician who referred them to the BCG-MDS-PED for confirmation of the initial diagnosis. The majority of these physicians have required orientation on diagnostic and treatment issues, as well as to complete cytogenetic and molecular studies. From these 114 patients, 64 patients were confirmed as MDS. We believe that, the more numerous the MDS-studied cases, the more experienced will be the referee group on clinical and laboratory features on childhood MDS in Brazil. (C) 2002 Published by Elsevier B.V. Ltd.

Connective tissue graft to correct peri-implant soft tissue margin: A clinical report

This clinical report describes the use of a subepithelial connective tissue graft to recontour a soft tissue margin discrepancy for a single-implant crown in the anterior maxilla. This procedure demonstrates that the use of soft tissue grafts to correct an esthetic deficiency may be a feasible approach to establish new and stable peri-implant soft tissue contours. The patient presented was followed for 18 months.

Arsenic as internal standard to correct for interferences in the determination of antimony by hydride generation in situ trapping graphite furnace atomic absorption spectrometry

The feasibility of using internal standardization (IS) to correct for interferences in hydride generation with in situ trapping in graphite furnace was evaluated. Arsenic was chosen as internal standard for Sb determination and Ir was used as permanent modifier. Fluctuations in the main parameters that affect the analytical results were minimized by IS and an effective contribution was verified in the studies of liquid phase interferences. Cobalt and Ni2+ were selected to illustrate the potential use of IS on the correction of interference by transition metals. The application of IS allows the Sb determination in samples containing up to 20-fold higher concentration of the Co2+ and Ni2+ when compared to the procedure without IS. The relative standard deviation of measurements varied from 0.3% to 0.7% and from 1.1% to 3.2% with and without IS, respectively. Recoveries within 92% and 107% of spiked aqueous solution containing Sb(III) and Sb(V) were found. (c) 2005 Elsevier B.V. All rights reserved.