Substrate Conformal Imprint Lithography als innovatives Verfahren zur Herstellung von Nanospektrometern im sichtbaren Spektralbereich

Selbstbestimmung und -gestaltung des eigenen Alltages gewinnen immer mehr an Bedeutung, insbesondere für ältere Mitmenschen in ländlichen Regionen, die auf ärztliche Versorgung angewiesen sind. Die Schaffung sogenannter smart personal environments mittels einer Vielzahl von, nahezu unsichtbar installierten Sensoren im gewohnten Lebensraum liefert dem Anwender (lebens-) notwendige Informationen über seine Umgebung oder seinen eigenen Körper. Dabei gilt es nicht den Anwender mit technischen Daten, wie Spektren, zu überfordern. Vielmehr sollte die Handhabung so einfach wie möglich gestaltet werden und die ausgewertete Information als Indikationsmittel zum weiteren Handeln dienen. Die Anforderungen an moderne Technologien sind folglich eine starke Miniaturisierung, zur optimalen Integration und Mobilität, bei gleichzeitig hoher Auflösung und Stabilität. Die Zielsetzung der vorliegenden Arbeit ist die Miniaturisierung eines spektroskopischen Systems bei gleichzeitig hohem Auflösungsvermögen für die Detektion im sichtbaren Spektralbereich. Eine Möglichkeit für die Herstellung eines konkurrenzfähigen „Mini-„ oder „Mikrospektrometers“ basiert auf Fabry-Pérot (FP) Filtersystemen, da hierbei die Miniaturisierung nicht wie üblich auf Gittersysteme limitiert ist. Der maßgebliche Faktor für das spektrale Auflösungsvermögen des Spektrometers ist die vertikale Präzision und Homogenität der einzelnen 3D Filterkavitäten, die die unterschiedlichen Transmissionswellenlängen der einzelnen Filter festlegen. Die wirtschaftliche Konkurrenzfähigkeit des am INA entwickelten Nanospektremeters wurde durch die maximale Reduzierung der Prozessschritte, nämlich auf einen einzigen Schritt, erreicht. Erstmalig wird eine neuartige Nanoimprint Technologie, die sog. Substrate Conformal Imprint Lithography, für die Herstellung von wellenlängen-selektierenden Filterkavitäten von stark miniaturisierten Spektrometern eingesetzt. Im Zuge dieser Arbeit wird das Design des FP Filtersystems entwickelt und technologisch mittels Dünnschichtdeposition und der Nanoimprinttechnologie realisiert. Ein besonderer Schwerpunkt liegt hierbei in der Untersuchung des Prägematerials, dessen optische Eigenschaften maßgeblich über die Performance des Filtersystems entscheiden. Mit Hilfe eines speziell gefertigten Mikroskopspektrometers werden die gefertigten Filterfelder hinsichtlich ihrer Transmissionseigenschaften und ihres Auflösungsvermögens hin untersucht. Im Hinblick auf publizierte Arbeiten konkurrierender Arbeitsgruppen konnte eine deutliche Verbesserung des miniaturisierten Spektrometers erreicht werden. Die Minimierung der Prozessschritte auf einen einzigen Prägeschritt sorgt gleichzeitig für eine schnelle und zuverlässige Replikation der wellenlängenselektierenden Filterkavitäten. Im Rahmen dieser Arbeit wurde aufgezeigt, dass das angestrebte Nanospektrometer, trotz der sehr geringen Größe, eine hohe Auflösung liefern kann und gerade wegen der starken Miniaturisierung mit kommerziellen Mini- und Mikro-spektrometern konkurrenzfähig ist.

Two-dimensional Photonic Crystals Fabricated by Nanoimprint Lithography

We report on the process parameters of nanoimprint lithography (NIL) for the fabrication of two-dimensional (2-D) photonic crystals. The nickel mould with 2-D photonic crystal patterns covering the area up to 20mm² is produced by electron-beam lithography (EBL) and electroplating. Periodic pillars as high as 200nm to 250nm are produced on the mould with the diameters ranging from 180nm to 400nm. The mould is employed for nanoimprinting on the poly-methyl-methacrylate (PMMA) layer spin-coated on the silicon substrate. Periodic air holes are formed in PMMA above its glass-transition temperature and the patterns on the mould are well transferred. This nanometer-size structure provided by NIL is subjective to further pattern transfer.

Offset Lithography

A group of students are shown working in the Offset Lithography Department at the New York Trade School. Several presses can be seen in the room. Black and white photograph.

View of Lithography Lab at the New York Trade School

Part of a lithography lab at the New York Trade School is depicted in this photograph. To the right sample prints are hung on a board, while other prints can be seen on the table, possibly drying. Black and white photograph.

Members of the Stripping Class in the Lithography Department

In this photo, members of the Stripping Class in the Lithography Department of the New York Trade School are shown at work. Original caption reads, "Members of the Stripping Class. Equipment loaned by the United States Printing & Litho. Company and Local #1." Black and white photograph.

Lithography Students

A lithography student at the New York Trade School is shown working on a machine. Black and white photograph.

Lithography Laboratory 3

Photograph of students at the Voorhees Technical Institute.

Lithography Laboratory 2

Photograph of students at the Voorhees Technical Institute.

Lithography Laboratory 1

Photograph of students at the Voorhees Technical Institute.

Plasmonic structures fabricated by interference lithography for sensor applications

In this work we demonstrate the use of holographic lithography for generation of large area plasmonic periodic structures. Submicrometric array of holes, with different periods and thickness, were recorded in gold films, in areas of about 1 cm2, with homogeneity similar to that of samples recorded by Focused Ion Beam. In order to check the plasmonic properties, we measured the transmission spectra of the samples. The spectra exhibit the typical surface plasmon resonances (SPR) in the infrared whose position and width present the expected behavior with the period of the array and film thickness. The shift of the peak position with the permittivity of the surrounding medium demonstrates the feasebility of the sample as large area sensors. © 2009 SPIE.

Noble-metal nanoparticles produced with colloidal lithography: fabrication, optical properties and applications

In this work, metal nanoparticles produced by nanosphere lithography were studied in terms of their optical properties (in connection to their plasmon resonances), their potential application in sensing platforms - for thin layer sensing and bio-recognition events -, and for a particular case (the nanocrescents), for enhanced spectroscopy studies. The general preparation procedures introduced early in 2005 by Shumaker-Parry et al. to produce metallic nanocrescents were extended to give rise to more complex (isolated) structures, and also, by combining colloidal monolayer fabrication and plasma etching techniques, to arrays of them. The fabrication methods presented in this work were extended not only to new shapes or arrangements of particles, but included also a targeted surface tailoring of the substrates and the structures, using different thiol and silane compounds as linkers for further attachment of, i.e. polyelectrolyte layers, which allow for a controlled tailoring of their nanoenvironment. The optical properties of the nanocrescents were studied with conventional transmission spectroscopy; a simple multipole model was adapted to explain their behaviour qualitatively. In terms of applications, the results on thin film sensing using these particles show that the crescents present an interesting mode-dependent sensitivity and spatial extension. Parallel to this, the penetrations depths were modeled with two simplified schemes, obtaining good agreement with theory. The multiple modes of the particles with their characteristic decay lengths and sensitivities represent a major improvement for particle-sensing platforms compared to previous single resonance systems. The nanocrescents were also used to alter the emission properties of fluorophores placed close to them. In this work, green emitting dyes were placed at controlled distances from the structures and excited using a pulsed laser emitting in the near infrared. The fluorescence signal obtained in this manner should be connected to a two-photon processes triggered by these structures; obtaining first insight into plasmon-mediated enhancement phenomena. An even simpler and faster approach to produce plasmonic structures than that for the crescents was tested. Metallic nanodiscs and nanoellipses were produced by means of nanosphere lithography, extending a procedure reported in the literature to new shapes and optical properties. The optical properties of these particles were characterized by extinction spectroscopy and compared to results from the literature. Their major advantage is that they present a polarization-dependent response, like the nanocrescents, but are much simpler to fabricate, and the resonances can be tailored in the visible with relative ease. The sensing capabilities of the metallic nanodiscs were explored in the same manner as for the nanocrescents, meaning their response to thin layers and to bio-recognition events on their surface. The sensitivity of these nanostructures to thin films proved to be lower than that of the crescents, though in the same order of magnitude. Experimental information about the near field extension for the Au nanodiscs of different sizes was also extracted from these measurements. Further resonance-tailoring approaches based on electrochemical deposition of metals on the nanodiscs were explored, as a means of modifying plasmon resonances by changing surface properties of the nanoparticles. First results on these experiments would indicate that the deposition of Ag on Au on a submonolayer coverage level can lead to important blue-shifts in the resonances, which would open a simple way to tailor resonances by changing material properties in a local manner.

Nano-fabrication of complex functional structures using non- conventional lithography

In Chapter 1 I will present a brief introduction on the state of art of nanotechnologies, nanofabrication techniques and unconventional lithography as a technique to fabricate the novel electronic device as resistive switch so-called memristor is shown. In Chapter 2 a detailed description of the main fabrication and characterization techniques employed in this work is reported. Chapter 3 parallel local oxidation lithography (pLOx) describes as a main technique to obtain accurate patterning process. All the effective parameters has been studied and the optimized condition observed to highly reproducible with excellent patterned nanostructures. The effect of negative bias, calls local reduction (LR) studied. Moreover, the use of AC bias shows faster patterning process respect to DC bias. In Chapter 4 (metal/ e-SiO2/ Si nanojunction) it is shown how the electrochemical oxide nanostructures by using pLOx can be used in the fabrication of novel devices call memristor. We demonstrate a new concept, based on conventional materials, where the lifetime problem is resolved by introducing a “regeneration” step, which restores the nano-memristor to its pristine condition by applying an appropriate voltage cycle. In Chapter 5 (Graphene/ e-SiO2/ Si), Graphene as a building block material is used as an electrode to selectively oxidize the silicon substrate by pLOx set up for the fabrication of novel resistive switch device. In Chapter 6 (surface architecture) I will show another application of pLOx in biotechnology is shown. So the surface functionalization combine with nano-patterning by pLOx used to design a new surface to accurately bind biomolecules with the possibility of studying those properties and more application in nano-bio device fabrication. So, in order to obtain biochips, electronic and optical/photonics devices Nano patterning of DNA used as scaffolds to fabricate small functional nano-components.

Nanofabrication of Surface-Enhanced Raman Scattering Device by an Integrated Block-Copolymer and Nanoimprint Lithography Method

The integration of block-copolymers and nanoimprint lithography presents a novel and cost-effective approach to achieving nanoscale patterning capabilities. The authors demonstrate the fabrication of a surface-enhanced Raman scattering device using templates created by the block-copolymers nanoimprint lithography integrated method.