932 resultados para hands-on activities
Resumo:
Misconceptions exist in all fields of learning and develop through a person’s preconception of how the world works. Students with misconceptions in chemical engineering are not capable of correctly transferring knowledge to a new situation and will likely arrive at an incorrect solution. The purpose of this thesis was to repair misconceptions in thermodynamics by using inquiry-based activities. Inquiry-based learning is a method of teaching that involves hands-on learning and self-discovery. Previous work has shown inquiry-based methods result in better conceptual understanding by students relative to traditional lectures. The thermodynamics activities were designed to guide students towards the correct conceptual understanding through observing a preconception fail to hold up through an experiment or simulation. The developed activities focus on the following topics in thermodynamics: “internal energy versus enthalpy”, “equilibrium versus steady state”, and “entropy”. For each topic, two activities were designed to clarify the concept and assure it was properly grasped. Each activity was coupled with an instructions packet containing experimental procedure as well as pre- and post-analysis questions, which were used to analyze the effect of the activities on the students’ responses. Concept inventories were used to monitor students’ conceptual understanding at the beginning and end of the semester. The results did not show a statistically significant increase in the overall concept inventory scores for students who performed the activities compared to traditional learning. There was a statistically significant increase in concept area scores for “internal energy versus enthalpy” and “equilibrium versus steady state”. Although there was not a significant increase in concept inventory scores for “entropy”, written analyses showed most students’ misconceptions were repaired. Students transferred knowledge effectively and retained most of the information in the concept areas of “internal energy versus enthalpy” and “equilibrium versus steady state”.
Resumo:
Objectives. The objectives of this report were to describe current best standards in online education, class competencies, class objectives, class activities and to compare the class competencies, objectives and activities undertaken with the current best practices in online teaching and to provide a list of recommendations based on the most efficacious practices. ^ Methods. Utilizing the key words- online teaching, national standards, quality, online courses, I: (1) conducted a search on Google to find the best standard for quality online courses; the search yielded National Standards for Quality Online Teaching as the gold standard in online course quality; (2) specified class objectives and competencies as well as major activities undertaken as a part of the class. Utilizing the Southern Regional Education Board evaluation checklist for online courses, I: (1) performed an analysis comparing the class activities, objectives, and competencies with the current best standards; (2) utilized the information obtained from the analysis and class experiences to develop recommendations for the most efficacious online teaching practices. ^ Results. The class met the criteria set by the Southern Regional Education Board for evaluating online classes completely in 75%, partially in 16% and did not meet the criteria in 9% cases. The majority of the parameters in which the class did not meet the standards (4 of 5) were due to technological reasons beyond the scope of the class instructor, teaching assistant and instructional design. ^ Discussion. Successful online teaching requires awareness of technology, good communication, methods, collaboration, reflection and flexibility. Creation of an online community, engaging online learners and utilizing different learning styles and assessment methods promote learning. My report proposes that online teaching should actively engage the students and teachers with multiple interactive strategies as evidenced from current best standards of online education and my “hands-on” work experience. ^ Conclusion. The report and the ideas presented are intended to create a foundation for efficacious practice on the online teaching platform. By following many of the efficacious online practices described in the report and adding from their own experiences, online instructors and teaching assistants can contribute to effective online learning. ^
Resumo:
Childhood obesity is a significant public health problem. Over 15 percent of children in the United States are obese, and about 25 percent of children in Texas are overweight (CDC NHANES). Furthermore, about 30 percent of elementary school aged children in Harris County, Texas are overweight or obese (Children at Risk Institute 2010). In addition to actions such as increasing physical activity, decreasing television watching and video game time, decreasing snacking on low nutrient calorie dense foods and sugar sweetened beverages, children need to consume more fruits and vegetables. According to the National Health and Nutrition Examination Survey (NHANES) from 2002, about 26 percent of U.S. children are meeting the recommendations for daily fruit intake and about 16 percent are meeting the recommendations for daily vegetable intake (CDC NHANES). In 2004, the average total intake of vegetables was 0.9 cups per day and 1.1 cups of fruit per day by children ages four to nine years old in the U.S. (CDC NHANES). Not only do children need effective nutrition education to learn about fruits and vegetables, they also need access and repeated exposure to fruits and vegetables (Anderson 2009, Briefel 2009). Nutrition education interventions that provide a structured, hands-on curriculum such as school gardens have produced significant changes in child fruit and vegetable intake (Blair 2009, McAleese 2007). To prevent childhood obesity from continuing into adolescence and adulthood, effective nutrition education interventions need to be implemented immediately and for the long-term. However, research has shown short-term nutrition education interventions such as summer camps to be effective for significant changes in child fruit and vegetable intake, preferences, and knowledge (Heim 2009). ^ A four week summer camp based on cooking and gardening was implemented at 6 Multi-Service centers in a large, urban city. The participants included children ranging in age from 7 to 14 years old (n=64). The purpose of the camp was to introduce children to their food from the seed to the plate through the utilization of gardening and culinary exercises. The summer camp activities were aimed at increasing the children's exposure, willingness to try, preferences, knowledge, and intake of fruits and vegetables. A survey was given on the first day of camp and again on the last day of camp that measured the pre- and post differences in knowledge, intake, willingness to try, and preferences of fruits and vegetables. The present study examined the short-term effectiveness of a cooking and garden-based nutrition education program on the knowledge, willingness, preferences, and intake among children aged 8 to 13 years old (n=40). The final sample of participants (n=40) was controlled for those who completed pre- and post-test surveys and who were in or above the third grade level. Results showed a statistically significant increase in the reported intake of vegetables and preferences for vegetables, specifically green beans, and fruits. There was also a significant increase in preferences for fruits among boys and participants ages 11 to 13 years. The results showed a change in the expected direction of willingness to try, preferences for vegetables, and intake of fruit, however these were not statistically significant. Interestingly, the results also showed a decrease in the intake of low nutrient calorie dense foods such as sweets and candy.^
Resumo:
Collaborative efforts between the Neutronics and Target Design Group at the Instituto de Fusión Nuclear and the Molecular Spectroscopy Group at the ISIS Pulsed Neutron and Muon Source date back to 2012 in the context of the ESS-Bilbao project. The rationale for these joint activities was twofold, namely: to assess the realm of applicability of the low-energy neutron source proposed by ESS-Bilbao - for details; and to explore instrument capabilities for pulsed-neutron techniques in the range 0.05-3 ms, a time range where ESS-Bilbao and ISIS could offer a significant degree of synergy and complementarity. As part of this collaboration, J.P. de Vicente has spent a three-month period within the ISIS Molecular Spectroscopy Group, to gain hands-on experience on the practical aspects of neutron-instrument design and the requisite neutron-transport simulations. To date, these activities have resulted in a joint MEng thesis as well as a number of publications and contributions to national and international conferences. Building upon these previous works, the primary aim of this report is to provide a self-contained discussion of general criteria for instrument selection at ESS-Bilbao, the first accelerator-driven, low-energy neutron source designed in Spain. To this end, Chapter 1 provides a brief overview of the current design parameters of the accelerator and target station. Neutron moderation is covered in Chapter 2, where we take a closer look at two possible target-moderator-reflector configurations and pay special attention to the spectral and temporal characteristics of the resulting neutron pulses. This discussion provides a necessary starting point to assess the operation of ESSB in short- and long-pulse modes. These considerations are further explored in Chapter 3, dealing with the primary characteristics of ESS-Bilbao as a short- or long-pulse facility in terms of accessible dynamic range and spectral resolution. Other practical aspects including background suppression and the use of fast choppers are also discussed. The guiding principles introduced in the first three chapters are put to use in Chapter 4 where we analyse in some detail the capabilities of a small-angle scattering instrument, as well as how specific scientific requirements can be mapped onto the optimal use of ESS-Bilbao for condensed-matter research. Part 2 of the report contains additional supporting documentation, including a description of the ESSB McStas component, a detailed characterisation of moderator response and neutron pulses, and estimates ofparameters associated with the design and operation of neutron choppers. In closing this brief foreword, we wish to thank both ESS-Bilbao and ISIS for their continuing encouragement and support along the way.
Resumo:
Abstract : Providing high-quality clinical experiences to prepare students for the complexities of the current health-care system has become a challenge for nurse educators. Additionally, there are concerns that the current model of clinical practice is suboptimal. Consequently, nursing programs have explored the partial replacement of traditional in-hospital clinical experiences with a simulated clinical experience. Despite research demonstrating numerous benefits to students following participation in simulation activities, insufficient research conducted within Québec exists to convince the governing bodies (Ordre des infirmières et des infirmiers du Québec, OIIQ; Ministère de L’Éducation supérieur, de la Recherche, de la Science et de la Technologie) to fully embrace simulation as part of nurse training. The purpose of this study was to examine the use of a simulated clinical experience (SCE) as a viable, partial pedagogical substitute for traditional clinical experience by examining the effects of a SCE on CEGEP nursing students’ perceptions of self-efficacy (confidence), and their ability to achieve course objectives. The findings will contribute new information to the current body of research in simulation. The specific case of obstetrical practice was examined. Based on two sections of the Nursing III-Health and Illness (180-30K-AB) course, the sample was comprised of 65 students (thirty-one students from section 0001 and thirty-four students from section 0002) whose mean age was 24.8 years. With two sections of the course available, the opportunity for comparison was possible. A triangulation mixed method design was used. An adapted version of Ravert’s (2004) Nursing Skills for Evaluation tool was utilized to collect data regarding students’ perceptions of confidence related to the nursing skills required for care of mothers and their newborns. Students’ performance and achievement of course objectives was measured through an Objective Structured Clinical Examination (OSCE) consisting of three marked stations designed to test the theoretical and clinical aspects of course content. The OSCE was administered at the end of the semester following completion of the traditional clinical experience. Students’ qualitative comments on the post -test survey, along with journal entries served to support the quantitative scale evaluation. Two of the twelve days (15 hours) allocated for obstetrical clinical experience were replaced by a SCE (17%) over the course of the semester. Students participated in various simulation activities developed to address a range of cognitive, psychomotor and critical thinking skills. Scenarios incorporating the use of human patient simulators, and designed using the Jeffries Framework (2005), exposed students to the care of families and infants during the perinatal period to both reflect and build upon class and course content in achievement of course objectives and program competencies. Active participation in all simulation activities exposed students to Bandura’s four main sources of experience (mastery experiences, vicarious experiences, social persuasion, and physiologic/emotional responses) to enhance the development of students’ self-efficacy. Results of the pre-test and post-test summative scores revealed a statistically significant increase in student confidence in performing skills related to maternal and newborn care (p < .0001) following participation in the SCE. Confidence pre-test and post-test scores were not affected by the students’ section. Skills related to the care of the post-partum mother following vaginal or Caesarean section delivery showed the greatest change in confidence ratings. OSCE results showed a mean total class score (both sections) of 57.4 (70.0 %) with normal distribution. Mean scores were 56.5 (68.9%) for section 0001 and 58.3 (71.1%) for section 0002. Total scores were similar between sections (p =0.342) based on pairwise comparison. Analysis of OSCE scores as compared to students’ final course grade revealed similar distributions. Finally, qualitative analysis identified how students’ perceived the SCE. Students cited gains in knowledge, development of psychomotor skills and improved clinical judgement following participation in simulation activities. These were attributed to the « hands on » practice obtained from working in small groups, a safe and authentic learning environment and one in which students could make mistakes and correct errors as having the greatest impact on learning through simulation.
Resumo:
Souza MA, Souza MH, Palheta RC Jr, Cruz PR, Medeiros BA, Rola FH, Magalhaes PJ, Troncon LE, Santos AA. Evaluation of gastrointestinal motility in awake rats: a learning exercise for undergraduate biomedical students. Adv Physiol Educ 33: 343-348, 2009; doi: 10.1152/advan.90176.2008.-Current medical curricula devote scarce time for practical activities on digestive physiology, despite frequent misconceptions about dyspepsia and dysmotility phenomena. Thus, we designed a hands-on activity followed by a small-group discussion on gut motility. Male awake rats were randomly submitted to insulin, control, or hypertonic protocols. Insulin and control rats were gavage fed with 5% glucose solution, whereas hypertonic-fed rats were gavage fed with 50% glucose solution. Insulin treatment was performed 30 min before a meal. All meals (1.5 ml) contained an equal mass of phenol red dye. After 10, 15, or 20 min of meal gavage, rats were euthanized. Each subset consisted of six to eight rats. Dye recovery in the stomach and proximal, middle, and distal small intestine was measured by spectrophotometry, a safe and reliable method that can be performed by minimally trained students. In a separate group of rats, we used the same protocols except that the test meal contained (99m)Tc as a marker. Compared with control, the hypertonic meal delayed gastric emptying and gastrointestinal transit, whereas insulinic hypoglycemia accelerated them. The session helped engage our undergraduate students in observing and analyzing gut motor behavior. In conclusion, the fractional dye retention test can be used as a teaching tool to strengthen the understanding of basic physiopathological features of gastrointestinal motility.
Resumo:
Objective: To describe the associations between hand osteoarthritis (OA), pain and disability in males and females and to further validate the Australian/Canadian CA hand index (AUSCAN LK3.0). Design: Cross-sectional study of 522 subjects from 101 Tasmanian families (males N=174, females N=348). Hand OA was assessed by two observers using the Altman atlas for joint space narrowing and osteophytes at distal interphalangeal and first carpometacarpal joints as well as a score for Heberden's nodes based on hand photography. Hand pain and function were assessed by the AUSCAN LK3.0 and grip strength by dynamometry in both hands on two occasions. Results: The prevalence of hand CA was high in this sample at 44-71% (depending on site). Pain and dysfunction increased with age while grip strength decreased (all P <0.001). All three measures were markedly worse in women, even after taking the severity of arthritis into account. Hand CA explained 5.7-10% of the variation in function, grip strength and pain scores, even after adjustment for age and sex. Further adjustment suggested that the osteoarthritic associations with function and grip strength were largely mediated by pain. Severity of disease was more strongly associated with these scores than presence or absence. Lastly, the AUSCAN LK3.0 showed a comparable association to grip strength with structural damage providing further evidence of index validity. Conclusions: Hand CA at these two sites makes substantial contributions to hand function, strength and pain. The associations with function and strength measures appear mediated by pain. Gender differences in all three measures persist after adjustment for variation in age and CA severity indicating that factors apart from radiographic disease are responsible. (C) 2001 OsteoArthritis Research Society International.
Resumo:
Relatório da Prática Profissional Supervisionada Mestrado em Educação Pré-Escolar
Resumo:
As technology is increasingly being seen as a facilitator to learning, open remote laboratories are increasingly available and in widespread use around the world. They provide some advantages over traditional hands-on labs or simulations. This paper presents the results of integrating the open remote laboratory VISIR into several courses, in various contexts and using various methodologies. These integrations, all related to higher education engineering, were designed by teachers with different perspectives to achieve a range of learning outcomes. The degree to which these VISIR-related outcomes were accomplished is discussed. The results reflect the levels of student engagement and learning and of teacher involvement. From the analysis, a connection between these two aspects was traced, although only related to the user profiles. VISIR is shown to be always of benefit for more motivated students, but this benefit can be maximized under particular conditions and characteristics.
Resumo:
Relatório de estágio de mestrado em Ensino do 1.º e 2.º Ciclo do Ensino Básico
Resumo:
Different visual stimuli have been shown to recruit different mental imagery strategies. However the role of specific visual stimuli properties related to body context and posture in mental imagery is still under debate. Aiming to dissociate the behavioural correlates of mental processing of visual stimuli characterized by different body context, in the present study we investigated whether the mental rotation of stimuli showing either hands as attached to a body (hands-on-body) or not (hands-only), would be based on different mechanisms. We further examined the effects of postural changes on the mental rotation of both stimuli. Thirty healthy volunteers verbally judged the laterality of rotated hands-only and hands-on-body stimuli presented from the dorsum- or the palm-view, while positioning their hands on their knees (front postural condition) or behind their back (back postural condition). Mental rotation of hands-only, but not of hands-on-body, was modulated by the stimulus view and orientation. Additionally, only the hands-only stimuli were mentally rotated at different speeds according to the postural conditions. This indicates that different stimulus-related mechanisms are recruited in mental rotation by changing the bodily context in which a particular body part is presented. The present data suggest that, with respect to hands-only, mental rotation of hands-on-body is less dependent on biomechanical constraints and proprioceptive input. We interpret our results as evidence for preferential processing of visual- rather than kinesthetic-based mechanisms during mental transformation of hands-on-body and hands-only, respectively.
Resumo:
Taking the Royal College of Barcelona (1760 -1843) as a case study this paper shows the development of modern surgery in Spain initiated by Bourbon Monarchy founding new kinds of institutions through their academic activities of spreading scientific knowledge. Antoni Gimbernat was the most famousinternationally recognised Spanish surgeon. He was trained as a surgeon at the Royal College of Surgery in Cadiz and was later appointed as professor of theAnatomy in the College of Barcelona. He then became Royal Surgeon of King Carlos IV and with that esteemed position in Madrid he worked resiliently to improve the quality of the Royal colleges in Spain. Learning human bodystructure by performing hands-on dissections in the anatomical theatre has become a fundamental element of modern medical education. Gimbernat favoured the study of natural sciences, the new chemistry of Lavoisier and experimental physics in the academic programs of surgery. According to the study of a very relevant set of documents preserved in the library, the so-called “juntas literarias”, among the main subjects debated in the clinical sessions was the concept of human beings and diseases in relation to the development of the new experimental sciences. These documents showed that chemistry andexperimental physics were considered crucial tools to understand the unexplained processes that occurred in the diseased and healthy human bodyand in a medico-surgical context. It is important to stress that through these manuscripts we can examine the role and the reception of the new sciences applied to healing arts.
Resumo:
OBJECTIVE: The objective of this trial was to assess which type of warm-up has the highest effect on virtual reality (VR) laparoscopy performance. The following warm-up strategies were applied: a hands-on exercise (group 1), a cognitive exercise (group 2), and no warm-up (control, group 3). DESIGN: This is a 3-arm randomized controlled trial. SETTING: The trial was conducted at the department of surgery of the University Hospital Basel in Switzerland. PARTICIPANTS: A total of 94 participants, all laypersons without any surgical or VR experience, completed the study. RESULTS: A total of 96 participants were randomized, 31 to group 1, 31 to group 2, and 32 to group 3. There were 2 postrandomization exclusions. In the multivariate analysis, we found no evidence that the intervention had an effect on VR performance as represented by 6 calculated subscores of accuracy, time, and path length for (1) camera manipulation and (2) hand-eye coordination combined with 2-handed maneuvers (p = 0.795). Neither the comparison of the average of the intervention groups (groups 1 and 2) vs control (group 3) nor the pairwise comparisons revealed any significant differences in VR performance, neither multivariate nor univariate. VR performance improved with increasing performance score in the cognitive exercise warm-up (iPad 3D puzzle) for accuracy, time, and path length in the camera navigation task. CONCLUSIONS: We were unable to show an effect of the 2 tested warm-up strategies on VR performance in laypersons. We are currently designing a follow-up study including surgeons rather than laypersons with a longer warm-up exercise, which is more closely related to the final task.
Resumo:
"Metric Training For The Highway Industry", HR-376 was designed to produce training materials for the various divisions of the Iowa DOT, local government and the highway construction industry. The project materials were to be used to introduce the highway industry in Iowa to metric measurements in their daily activities. Five modules were developed and used in training over 1,000 DOT, county, city, consultant and contractor staff in the use of metric measurements. The training modules developed deal with the planning through operation areas of highway transportation. The materials and selection of modules were developed with the aid of an advisory personnel from the highway industry. Each module is design as a four hour block of instruction and a stand along module for specific types of personnel. Each module is subdivided into four chapters with chapter one and four covering general topics common to all subjects. Chapters two and three are aimed at hands on experience for a specific group and subject. This module includes: Module 1 - Basic Introduction to the Use of International Units of Measurement. This module is designed for use by all levels of personnel, primarily office staff, and provides a basic background in the use of metric measurements in both written and oral communications.
Resumo:
"Metric Training For The Highway Industry", HR-376 was designed to produce training materials for the various divisions of the Iowa DOT, local government and the highway construction industry. The project materials were to be used to introduce the highway industry in Iowa to metric measurements in their daily activities. Five modules were developed and used in training over 1,000 DOT, county, city, consultant and contractor staff in the use of metric measurements. The training modules developed deal with the planning through operation areas of highway transportation. The materials and selection of modules were developed with the aid of an advisory personnel from the highway industry. Each module is design as a four hour block of instruction and a stand along module for specific types of personnel. Each module is subdivided into four chapters with chapter one and four covering general topics common to all subjects. Chapters two and three are aimed at hands on experience for a specific group and subject. This module includes: Module 2 - Construction and Maintenance Operations and Reporting. This module provides hands on examples of applications of metric measurements in the construction and maintenance field operations.