937 resultados para drive-by
Resumo:
This research sought to explore organisational factors that drive successful fundraising. Drawing on Strategic Management theory, this qualitative study examined the key intraorganisational factors that organisations develop to be effective at fundraising within the context of extraorganisational factors that can affect fundraising effectiveness. In this way, it helps build a fundraising effectiveness theory. The findings from this study afford leaders of nonprofits an opportunity to reflect on their reasons for pursuing fundraising as an income stream, their level of understanding of fundraising, the degree of investment they are willing to make and the critical leadership required by the CEO.
Resumo:
Driver sleepiness is a major contributor to road crashes. The current study sought to examine the association between perceptions of effectiveness of six sleepiness countermeasures and their relationship with self-reports of continuing to drive while sleepy among 309 drivers after controlling for the influence of age, sex, motivation for driving sleepy, and risk perception of sleepy driving. The results demonstrate that the variables of age, sex, motivation, and risk perception were significantly associated with self-reports of continuing to drive while sleepy and only one countermeasure was associated with self-reports of continuing to drive while sleepy. Further, it was found that age differences in self-reports of continuing to drive while sleepy was mediated by participants’ motivation and risk perception. These findings highlight modifiable factors that could be focused on with interventions that seek to modify drivers’ attitudes and behaviours of driving while sleepy.
Resumo:
Background Drink driving remains an important issue to address in terms of health and injury prevention even though research shows that over time there has been a steady decline in drink driving. This has been attributed to the introduction of countermeasures such as random breath testing (RBT), changing community attitudes and norms leading to less acceptance of the behaviour and, to a lesser degree, the implementation of programs designed to deter offenders from engaging in drink driving. Most of the research to date has focused on the hard core offenders - those with high blood alcohol content at the time of arrest, and those who have more than one offence. Aims There has been little research on differences within the first offender population or on factors contributing to second offences. This research aims to fill the gap by reporting on those factors in a sample of offenders. Methods This paper reports on a study that involved interviewing 198 first offenders in court and following up this group 6-8 months post offence. Of these original participants, 101 offenders were able to be followed up, with 88 included in this paper on the basis that they had driven a vehicle since the offence. Results Interestingly, while the rate of reported apprehended second offences was low in that time frame (3%), a surprising number of offenders reported that they had driven under the influence at a much higher rate (27%). That is a large proportion of first offenders were willing to risk the much larger penalties associated with a second offence in order to engage in drink driving. Discussion and conclusions Key characteristics of this follow up group are examined to inform the development of a evidence based brief intervention program that targets first time offenders with the goal of decreasing the rate of repeat drink driving.
Resumo:
Recent advances in direct-use plasmonic-metal nanoparticles (NPs) as photocatalysts to drive organic synthesis reactions under visible-light irradiation have attracted great interest. Plasmonic-metal NPs are characterized by their strong interaction with visible light through excitation of the localized surface plasmon resonance (LSPR). Herein, we review recent developments in direct photocatalysis using plasmonic-metal NPs and their applications. We focus on the role played by the LSPR of the metal NPs in catalyzing organic transformations and, more broadly, the role that light irradiation plays in catalyzing the reactions. Through this, the reaction mechanisms that these light-excited energetic electrons promote will be highlighted. This review will be of particular interest to researchers who are designing and fabricating new plasmonic-metal NP photocatalysts by identifying important reaction mechanisms that occur through light irradiation.
Resumo:
Virtual working environments are intrinsic to the contemporary workplace and collaborative skills are a vital graduate capability. To develop students’ collaborative skills, first year medical laboratory science students undertake a group poster project, based on a blended learning model. Learning is scaffolded in lectures, workshops in collaborative learning spaces, practitioner mentoring sessions, and online resources. Google Drive provides an online collaborative space for students to realise tangible outcomes from this learning. A Google Drive document is created for each group and shared with members. In this space, students assign tasks and plan workflow, share research, progressively develop poster content, reflect and comment on peer contributions and use the messaging functions to ‘talk’ to group members. This provides a readily accessible, transparent record of group work, crucial in peer assessment, and a communication channel for group members and the lecturer, who can support groups if required. This knowledge creation space also augments productivity and effectiveness of face-to-face collaboration. As members are randomly allocated to groups and are often of diverse backgrounds and unknown to each other, resilience is built as students navigate the uncertainties and complexities of group dynamics, learning to focus on the goal of the team task as they constructively and professionally engage in team dialogue. Students are responsible and accountable for individual and group work. The use of Google Drive was evaluated in a survey including Likert scale and open ended qualitative questions. Statistical analysis was carried out. Results show students (79%) valued the inclusion of online space in collaborative work and highly appreciated (78%) the flexibility provided by Google Drive, while recognising the need for improved notification functionality. Teaching staff recognised the advantages in monitoring and moderating collaborative group work, and the transformational progression in student collaborative as well as technological skill acquisition, including professional dialogue.
Resumo:
Evidence increasingly suggests that our behaviour on the road mirrors our behaviour across other aspects of our life. The idea that we drive as we live, described by Tillman and Hobbs more than 65 years ago when examining off-road behaviours of taxi drivers (1949), is the focus of the current paper. As part of a larger study examining the impact of penalty changes on a large cohort of Queensland speeding offenders, criminal (lifetime) and crash history (10 year period) data for a sub-sample of 1000 offenders were obtained. Based on the ‘drive as we live’ maxim, it was hypothesised that crash-involved speeding offenders would be more likely to have a criminal history than non-crash involved offenders. Overall, only 30% of speeding offenders had a criminal history. However, crash-involved offenders were significantly more likely to have a criminal history (49.4%) than non-crash involved offenders (28.6%), supporting the hypothesis. Furthermore, those deemed ‘most at fault’ in a crash were the group most likely to have at least one criminal offence (52.2%). When compared to the non-crash involved offenders, those deemed ‘not most at fault’ in a crash were also more likely to have had at least one criminal offence (46.5%). Therefore, when compared to non-crash involved speeding offenders, those offenders involved in a crash were more likely to have been convicted of at least one criminal offence, irrespective of whether they were deemed ‘most at fault’ in that crash. Implications for traffic offender management and policing are discussed.
Resumo:
This paper investigates increases in the identification of special educational needs in the New South Wales (NSW) government school system over the last two decades, which are then discussed with senior public servants working within the NSW Department of Education and Communities (DEC). Participant narratives indicate deep structural barriers to inclusion that are perpetuated by the discourses and practices of regular and special education. Despite policies that speak of ‘working together’ for ‘every student’ and ‘every school’, students who experience difficulty in schools and with learning often remain peripheral to the main game, even though their number is said to be increasing. There is, however, some positive progress being made. Findings suggest that key policy figures within the NSW DEC are keenly aware of the barriers and have adopted alternative strategies to drive inclusion via a new discourse of ‘participation’ which is underpinned by the linking of student assessment and the resourcing of schools.
Resumo:
Current source inverter (CSI) is an attractive solution in high-power drives. The conventional gate turn-off thyristor (GTO) based CSI-fed induction motor drives suffer from drawbacks such as low-frequency torque pulsation, harmonic heating, and unstable operation at low-speed ranges. These drawbacks can be overcome by connecting a current-controlled voltage source inverter (VSI) across the motor terminal replacing the bulky ac capacitors. The VSI provides the harmonic currents, which results in sinusoidal motor voltage and current even with the CSI switching at fundamental frequency. This paper proposes a CSI-fed induction motor drive scheme where GTOs are replaced by thyristors in the CSI without any external circuit to assist the turning off of the thyristors. Here, the current-controlled VSI, connected in shunt, is designed to supply the volt ampere reactive requirement of the induction motor, and the CSI is made to operate in leading power factor mode such that the thyristors in the CSI are autosequentially turned off. The resulting drive will be able to feed medium-voltage, high-power induction motors directly. A sensorless vector-controlled CSI drive based on the proposed configuration is developed. The experimental results from a 5 hp prototype are presented. Experimental results show that the proposed drive has stable operation throughout the operating range of speeds.
Resumo:
This paper develops a seven-level inverter structure for open-end winding induction motor drives. The inverter supply is realized by cascading four two-level and two three-level neutral-point-clamped inverters. The inverter control is designed in such a way that the common-mode voltage (CMV) is eliminated. DC-link capacitor voltage balancing is also achieved by using only the switching-state redundancies. The proposed power circuit structure is modular and therefore suitable for fault-tolerant applications. By appropriately isolating some of the inverters, the drive can be operated during fault conditions in a five-level or a three-level inverter mode, with preserved CMV elimination and DC-link capacitor voltage balancing, within a reduced modulation range.
Resumo:
Common mode voltage (CMV) variations in PWM inverter-fed drives generate unwanted shaft and bearing current resulting in early motor failure. Multilevel inverters reduce this problem to some extent, with higher number of levels. But the complexity of the power circuit increases with an increase in the number of inverter voltage levels. In this paper a five-level inverter structure is proposed for open-end winding induction motor (IM) drives, by cascading only two conventional two-level and three-level inverters, with the elimination of the common mode voltage over the entire modulation range. The DC link power supply requirement is also optimized by means of DC link capacitor voltage balancing, with PWM control., using only inverter switching state redundancies. The proposed power circuit gives a simple power bits structure.
Resumo:
Purpose – The purpose of this study is to explore senior managers’ perception and motivations of corporate social and environmental responsibility (CSER) reporting in the context of a developing country, Bangladesh. Design/methodology/approach – In-depth semi-structured interviews were conducted with 25 senior managers of companies listed on the Dhaka Stock Exchange. Publicly available annual reports of these companies were also analysed. Findings – The results indicate that senior managers perceive CSER reporting as a social obligation. The study finds that the managers focus mostly on child labour, human resources/rights, responsible products/services, health education, sports and community engagement activities as part of the social obligations. Interviewees identify a lack of a regulatory framework along with socio-cultural and religious factors as contributing to the low level of disclosures. These findings suggest that CSER reporting is not merely stakeholder-driven, but rather country-specific social and environmental issues play an important role in relation to CSER reporting practices. Research limitations/implications – This paper contributes to engagement-based studies by focussing on CSER reporting practices in developing countries and are useful for academics, practitioners and policymakers in understanding the reasons behind CSER reporting in developing countries. Originality/value – This paper addresses a literature “gap” in the empirical study of CSER reporting in a developing country, such as Bangladesh. This study fills a gap in the existing literature to understand managers’ motivations for CSER reporting in a developing country context. Managerial perceptions on CSER issues are largely unexplored in developing countries.
Resumo:
In this paper, a novel 12-sided polygonal space vector structure is proposed for an induction motor drive. The space vector pattern presented in this paper consists of two 12-sided concentric polygons with the outer polygon having a radius double the inner one. As compared to previously reported 12-sided polygonal space vector structures, this paper subdivides the space vector plane into smaller sized triangles. This helps in reducing the switching frequency of the inverters without deteriorating the output voltage quality. It also reduces the device ratings and dv/dt stress on the devices to half. At the same time, other benefits obtained from the existing 12-sided space vector structure, such as increased linear modulation range and complete elimination of 5th and 7th order harmonics in the phase voltage, are also retained in this paper. The space vector structure is realized by feeding an open-end induction motor with two conventional three-level neutral point clamped (NPC) inverters with asymmetric isolated dc link voltage sources. The neutral point voltage fluctuations in the three-level NPC inverters are eliminated by utilizing the switching state multiplicities for a space vector point. The pulsewidth modulation timings are calculated using sampled reference waveform amplitudes and are explained in detail in this paper. Experimental verification on a laboratory prototype shows that this configuration may be considered suitable for high power drives.
Resumo:
Though silicon tunnel field effect transistor (TFET) has attracted attention for sub-60 mV/decade subthreshold swing and very small OFF current (IOFF), its practical application is questionable due to low ON current (ION) and complicated fabrication process steps. In this paper, a new n-type classical-MOSFET-alike tunnel FET architecture is proposed, which offers sub-60 mV/decade subthreshold swing along with a significant improvement in ION. The enhancement in ION is achieved by introducing a thin strained SiGe layer on top of the silicon source. Through 2D simulations it is observed that the device is nearly free from short channel effect (SCE) and its immunity towards drain induced barrier lowering (DIBL) increases with increasing germanium mole fraction. It is also found that the body bias does not change the drive current but after body current gets affected. An ION of View the MathML source and a minimum average subthreshold swing of 13 mV/decade is achieved for 100 nm channel length device with 1.2 V supply voltage and 0.7 Ge mole fraction, while maintaining the IOFF in fA range.
Resumo:
[Book] The potential of electric light as a new building “material” was recognized in the 1920s and became a useful design tool by the mid-century. Skillful lighting allowed for theatricality, narrative, and a new emphasis on structure and space. The Structure of Light tells the story of the career of Richard Kelly, the field’s most influential figure. Six historians, architects, and practitioners explore Kelly’s unparalleled influence on modern architecture and his lighting designs for some of the 20th century’s most iconic buildings: Philip Johnson’s Glass House; Louis Kahn’s Kimbell Art Museum; Eero Saarinen’s GM Technical Center; and Mies van der Rohe’s Seagram Building, among many others. This beautifully illustrated history demonstrates the range of applications, building types, and artistic solutions he employed to achieve a “nocturnal modernity” that would render buildings evocatively different at night. The survival of Kelly’s rich correspondence and extensive diaries allows an in-depth look at the triumphs and uncertainties of a young profession in the making. The first book to focus on the contributions of a master in the field of architectural lighting, this fascinating volume celebrates the practice’s significance in modern design.
Resumo:
The drive to replace lead (Pb) from electronics has led to the replacement of tin (Sn) alloys as the terminal plating for electronic devices. However, the deposition of Sn based alloys as the component surface finish tends to induce Sn whisker that causes unintended electric shorts when the conductive whiskers grow across to the adjacent conductor. Internal stress is considered as the driving force that causes the growth of Sn whiskers. In this study, stress type of elevated temperature/ humidity exposure at 55C/85%RH with the storage for up to 24 months was conducted to define the acceleration factor in samples with deposition of immersion Sn plating and Sn solder dipping. The addition of Nickel (Ni) under-layer was also applied to examine the correlation to field conditions. The results showed that the whisker length increased in high humidity irrespective of the deposition methods. It was also shown that pure Sn solder dipping mitigated the whisker growth but does not completely prevent it when alloying Sn with 0.4%wtCu. Additionally, Ni under-layer was indicated to be more efficient in mitigating the growth of whisker by prolonging the incubation time for whisker formation.