Encapsulation of single hMSCs in polyelectrolyte shells

The main objective of this Thesis was to encapsulate single viable cells within polyelectrolyte films using the Layer-by-Layer (LbL) technique. Most of the experiments used human mesenchymal stem cells (MSCs) whose characteristics (capacity of selfrenewal and potential to differentiate into several types of cells) make them particularly interesting to be used in biomedical applications. Also, most of the experiments used alginate (ALG) as the anionic polyelectrolyte and chitosan (CHI) or poly(allylamine hydrochloride) (PAH) as the cationic polyelectrolyte. Hyaluronic acid (HA) was also tested as an anionic polyelectrolyte. At the beginning of the work, the experimental conditions necessary to obtain the encapsulation of individual cells were studied and established. Through fluorescence microscopy visualization by staining the cell nucleus and using polyelectrolytes conjugated to fluorescent dyes, it was possible to prove the obtainment of capsules containing one single cell inside. Capsules aggregation was an observed problem which, despite the efforts to design an experimental process to avoid this situation (namely, by playing with cell concentration and different means of re-suspending and stirring the cells), was not completely overcome. In a second part of the project, single cells were encapsulated within polyelectrolyte layers made of CHI/ALG, PAH/ALG and PAH/HA and their viability was evaluated through the resazurin reduction assay and the Live/Dead assay. In these experiments, during the LbL process, polyelectrolyte solutions were used at a concentration of 1mg/mL based on literature. In general, the viability of the encapsulated cells was shown to be very low/absent. Then, as a consequence of the lack of viability of cells encapsulated within polyelectrolyte layers, the LbL technique was applied in cells growing adherent to the surface of cell culture plates. The cells were cultured like in a sandwich, between the surface of the cell culture dish and the polyelectrolyte layers. Also here, the polyelectrolyte solutions were used at a concentration of 1mg/mL during the LbL process. Surprisingly, cell viability was also absent in these systems. A systematic study (dose-effect study) was performed to evaluate the effect of the concentration of the individual polyelectrolytes (ALG, CHI and PAH were studied) in cell viability. Experiments were performed using cells growing adherent to the surface of cell culture plates. The results pointed out that a very high (cytotoxic) concentration of polyelectrolytes had been in use. Also, in general, PAH was much more cytotoxic than CHI, whereas ALG was the less cytotoxic polyelectrolyte. Finally, using alginate and chitosan solutions with adequate concentrations (low concentrations: 50ng/mL and 1μg/mL), the encapsulation of single viable cells was again attempted. Once again, the encapsulated cells were not shown to be viable. In conclusion, the viability of the encapsulated cells is not only dependent on the cytotoxic characteristics (or combined cytotoxic characteristics) of the polyelectrolytes but it seems that, when detached from the culture plates, the cells become too fragile and lose their viability very easily.

Caracterização de matérias-primas regionais e desenvolvimento de formulações de massas cerâmicas para porcelanato

Initially concentrated in some poles at the South and Southeast regions of Brazil, the ceramic tiles industry became wide during the 80 s decade, with a disconcentration industrial and regional pulverization. The competitiveness in the ceramic tiles internal and external consumers markets, it has debtor the industries to invest in sophisticated products each time more, either in design or the technology, but, mainly, in its final properties. Amongst the diverse types of ceramic coating, the porcelanato if has detached had to its process of technological production and excellent characteristics techniques. The Porcelanato is currently the material for coatings that presents the best technical and aesthetic features when compared with others ceramics found on the market. The chemical composition and the others raw materials characteristics have an importance that must to be ally to the inherent characteristics of fabrication process, essentially those related to the cycle of burning. This work had as purpose to develop formularizations of ceramic mass for production of porcelanato without glass coating, pertaining to the group BIa (text of absorption of water ≤ 0.5%) and with resistance superior mechanics 35MPa from raw materials characterized. The ceramic raw materials selected to the development of this study (A1 and A2 clays, feldspate, talc and quartz) were submitted to the following tests: X-ray fluorescence - chemical analysis determination; X-ray diffraction - Analysis of the stages mineralogics; Laser granulometry - size distribution of particles; and Differential thermal analysis - thermal behavior. Were performed tests of absorption of water, lineal retraction of it burns, apparent specific mass and rupture tension the flexing. The results had evidenced that the formularizations that had the A1 clay and talc on its composition were efficient for the porcelanato production remaining their technological characteristics inside of the intervals of variation desired by the Norms of the ABNT

Influence of pitfall trap size and design on herpetofauna and small mammal studies in a Neotropical Forest

One of the most commonly used sampling techniques to capture leaf litter amphibians, lizards and small mammals is a set of pitfall traps with drift fences. However, there are still many speculations concerning the effectiveness of different designs of pitfall traps and the most adequate size of each trap. To address this problem, we conducted the first standardized comparison of patterns of species richness, rank-abundance, and community structure of leaf litter amphibians, lizards and small mammals for two trap designs (I and Y format) and three bucket sizes (35, 62, and 100 L) in a Neotropical forest. Results are very similar for the herpetofauna, regardless of the pitfall trap design or size used, while for small mammals values of species richness were higher for 100 L pitfall traps, as compared to the smaller traps. Therefore, the use of 100 L pitfall traps is recommended to sample the terrestrial vertebrate fauna, in multidisciplinary studies. For surveys aiming only the herpetofauna the use of smaller (35 L) traps is acceptable, taking into consideration the cost-benefits obtained by the smaller traps, in comparison to the larger ones.

Ciências da Funcionalidade Humana e Sustentabilidade Ambiental: a junção das partes constitui o todo?

The content of this article addresses two complex issues that concern contemporary society: Science of Human Functioning and Environmental Sustainability. On the one hand, the Science of Human Functioning, meeting the principles of the International Classification of Functioning (ICF) and Universal Design, aim the development of accessible projects, products and environments, used by everyone, at the greatest extent possible, free from adaptation or plans to remove architectural barriers. The Universal Design is a process for creating products that are accessible to everyone, regardless their personal characteristics, age, skills and needs. On the other hand, Environmental Sustainability, with principles already imbricated in the Science of Human Functioning, traverses towards the acquisition of realistic measures for the segments of human activities. Based on the emphasis of the sustainable development, it aims to meet current needs not compromising the possibility of future generations to meet their own needs. Thus, it seeks the balance in coexistence between men and the environment by taking care of environmental, social and economic aspects and seeking for alternatives to support life on Earth with no harm to the quality of the planet in the future. It is argued that the combination of the issues contains relevant potential for interdisciplinary action, bringing together professionals from several fields of knowledge that, by socializing their experiences aiming at improving the human functioning and quality of life of people and environment, will be able to innovate and reinvent the knowledge for benefiting welfare, thus contributing effectively to society.

Two extensions for the ALWABP: Parallel stations and collaborative approach

In this article, we introduce two new variants of the Assembly Line Worker Assignment and Balancing Problem (ALWABP) that allow parallelization of and collaboration between heterogeneous workers. These new approaches suppose an additional level of complexity in the Line Design and Assignment process, but also higher flexibility; which may be particularly useful in practical situations where the aim is to progressively integrate slow or limited workers in conventional assembly lines. We present linear models and heuristic procedures for these two new problems. Computational results show the efficiency of the proposed approaches and the efficacy of the studied layouts in different situations. (C) 2012 Elsevier B.V. All rights reserved.

Design and development of the new composite-material mainplane of the Dallara T12 race car

Abstract (US) Composite material components design and production techniques are discussed in the present graduation paper. In particular, this paper covers the design process and the production process of a carbon-fiber composite material component for a high performance car, more specifically, the Dallara T12 race car. This graduation paper is split in two. After a brief introduction on existing composite materials (their origins and applications), the first part of the present paper covers the main theoretical concepts behind the design of composite material components: particular focus will be given to carbon-fiber composites. The second part of the present paper covers the whole design and production process that the candidate carried out to create the new front mainplane of the Dallara T12 race car. This graduation paper is the result of a six-months-long internship that the candidate conducted as Design Office Trainee inside Dallara Automobili S.p.A. Abstract (ITA) La presente tesi di laurea discute le metodologie progettuali e produttive legate alla realizzazione di un componente in materiale composito. Nello specifico, viene discussa la progettazione e la produzione di un componente in fibra di carbonio destinato ad una vettura da competizione. La vettura in esame è la Dallara T12. Il lavoro è diviso in due parti. Nella prima parte, dopo una breve introduzione sull’origine e le tipologie di materiali compositi esistenti, vengono trattati i concetti teorici fondamentali su cui si basa la progettazione di generici componenti in materiale composito, con particolare riguardo ai materiali in fibra di carbonio. Nella seconda parte viene discusso tutto il processo produttivo che il candidato ha portato a termine per realizzare il nuovo alettone anteriore della Dallara T12. La presente tesi di laurea è il risultato del lavoro di progettazione che il candidato ha svolto presso l’Ufficio Tecnico di Dallara Automobili S.p.A. nel corso di un tirocinio formativo di sei mesi.

Produktentwicklung von Druckgussteilen

Die Produktentwicklung von Druckgussteilen kann flexibel, wirtschaftlich und schnell durch die Herstellung von RP-Unikaten und Metallabgüssen aus Keramikschalen realisiert werden. Dieser Weg eignet sich vor allem für komplexe Bauteile und macht eine Produkterprobung mit qualitativ deutlich verbesserter Aussagekraft trotz reduzierter Entwicklungskosten möglich. In Abgrenzung zum Sandguss, muss die Konstruktion der Bauteile nicht verändert werden. 
Durch eine gezielte Wärmebehandlung wird die Vergleichbarkeit der mechanischen Eigenschaften von Prototypen zu späteren Serienteilen möglich. Technisch sinnvolle Änderungen sind leicht und flexibel realisierbar, da werkzeuglos gefertigt wird. Für unerreichbare Hohlräume und Hinterschnitte kann in diesem Verfahren mit Keramikkernen als Einleger gearbeitet werden. Auch diese Kerne können werkzeuglos hergestellt werden. Ein Verzicht auf technisch Sinnvolles aus Kostengründen ist damit hinfällig.
In der Konstruktion ergeben sich neue Freiheitsgrade, so dass Ziele im Leichtbau, die Einsparung von Verbindungstechnik oder die erhöhte Materialeffizienz realisierbar werden. Die so entwickelten Bauteile sind insgesamt qualitativ hochwertiger und bilden die technischen Anforderungen bestmöglich ab. Damit kann die für die Erprobung benötigte Zahl der Prototypen verringert werden. 
Je komplexer die Geometrie der Bauteile, je stärker kommen die beschriebenen Effekte zum Tragen. Diese Aussage gilt für die Produktentwicklung und für Kleinserien, die herkömmlich zu teuer und zu schwer im Druckguss oder Schmiedeverfahren produziert werden

A process evaluation of a health literacy intervention targeting pediatric providers' communication skills at the Texas Children's Health Plan

Background. Health literacy is an important determinant for quality health care, and affects communication between patients and physicians. Poor communication may result in negative effects in health. Improved communication between patients and physicians could positively affect health outcomes. Communication skills are teachable.^ Objectives. (1) to evaluate the process involved in the design and implementation of a health literacy intervention targeting pediatric providers’ communication skills at the Texas Children’s Health Plan in Houston, Texas; and (2) to describe lessons learned from this process that may be used in future attempts to address the issue of health literacy and health communication. ^ Design/methods. The process evaluation of the implementation of a health literacy strategy at the Texas Children’s Health Plan (TCHP) consisted of a critical analysis of all documents and minutes from meetings of the team of investigators. It also involved a secondary analysis of data collected between December 2006 and June 2007. Descriptive statistics, paired t-test and Wilcoxon-signed-rank test were employed in analyzing the data. This information was complemented with a limited review of existing literature on communication skills training programs. ^ Results. The design of the educational intervention followed recommendations from experts in the field of health literacy. The delivery of the intervention was possible and benefited from existing resources and logistics within the TCHP. Very few targeted providers participated in two offerings of the workshop (6.6% and 1.7% respectively). After the educational intervention, providers showed increased knowledge of health literacy facts and its effects in health (p=0.001); increased awareness of the low health literacy problem (p=0.003); increased expectations for change in practice (p=0.002), and intent to use health literacy strategies for communication immediately following the intervention (p=0.001). Low participation indicated the need for further investigation of barriers to, and means for successful implementation of programs aimed to improving health communication. ^ Conclusions. A short, focused intervention utilizing health literacy strategies for communication appeared effective in increasing knowledge and intentions for change in a small group of pediatric providers. ^

Systematic review of worksite-based behavior change programs that target metabolic syndrome risk factors

Approximately one-third of US adults have metabolic syndrome, the clustering of cardiovascular risk factors that include hypertension, abdominal adiposity, elevated fasting glucose, low high-density lipoprotein (HDL)-cholesterol and elevated triglyceride levels. While the definition of metabolic syndrome continues to be much debated among leading health research organizations, the fact is that individuals with metabolic syndrome have an increased risk of developing cardiovascular disease and/or type 2 diabetes. A recent report by the Henry J. Kaiser Family Foundation found that the US spent $2.2 trillion (16.2% of the Gross Domestic Product) on healthcare in 2007 and cited that among other factors, chronic diseases, including type 2 diabetes and cardiovascular disease, are large contributors to this growing national expenditure. Bearing a substantial portion of this cost are employers, the leading providers of health insurance. In lieu of this, many employers have begun implementing health promotion efforts to counteract these rising costs. However, evidence-based practices, uniform guidelines and policy do not exist for this setting in regard to the prevention of metabolic syndrome risk factors as defined by the National Cholesterol Education Program (NCEP) Adult Treatment Panel III (ATP III). Therefore, the aim of this review was to determine the effects of worksite-based behavior change programs on reducing the risk factors for metabolic syndrome in adults. Using relevant search terms, OVID MEDLINE was used to search the peer-reviewed literature published since 1998, resulting in 23 articles meeting the inclusion criteria for the review. The American Dietetic Association's Evidence Analysis Process was used to abstract data from selected articles, assess the quality of each study, compile the evidence, develop a summarized conclusion, and assign a grade based upon the strength of supporting evidence. The results revealed that participating in a worksite-based behavior change program may be associated in one or more improved metabolic syndrome risk factors. Programs that delivered a higher dose (>22 hours), in a shorter duration (<2 years) using two or more behavior-change strategies were associated with more metabolic risk factors being positively impacted. A Conclusion Grade of III was obtained for the evidence, indicating that studies were of weak design or results were inconclusive due to inadequate sample sizes, bias and lack of generalizability. These results provide some support for the continued use of worksite-based health promotion and further research is needed to determine if multi-strategy, intense behavior change programs targeting multiple risk factors are able to sustain health improvements in the long-term.^

Diseño, optimización y análisis de sistemas basados en técnicas láser, para el modelado geométrico, registro y documentación, aplicados a entidades de interés patrimonial.

El objetivo de la presente tesis doctoral es el desarrollo e implementación de un sistema para mejorar la metodología de extracción de la información geométrica necesaria asociada a los procesos de documentación de entidades de interés patrimonial, a partir de la información proporcionada por el empleo de sensores láser, tanto aéreos como terrestres. Para ello, inicialmente se realiza una presentación y justificación de los antecedentes y la problemática en el registro de información geométrica para el patrimonio, detallando todos aquellos sistemas de registro y análisis de la información geométrica utilizados en la actualidad. Este análisis permitirá realizar la comparación con los sistemas de registro basados en técnicas láser, aportando sugerencias de utilización para cada caso concreto. Posteriormente, se detallan los sistemas de registro basados en técnicas láser, comenzando por los sensores aerotransportados y concluyendo con el análisis pormenorizado de los sensores terrestres, tanto en su aplicación en modo estático como móvil. Se exponen las características técnicas y funcionamiento de cada uno de ellos, así como los ámbitos de aplicación y productos generados. Se analizan las fuentes de error que determinan la precisión que puede alcanzar el sistema. Tras la exposición de las características de los sistemas LiDAR, se detallan los procesos a realizar con los datos extraídos para poder generar la información necesaria para los diferentes tipos de objetos analizados. En esta exposición, se hace hincapié en los posibles riesgos que pueden ocurrir en algunas fases delicadas y se analizarán los diferentes algoritmos de filtrado y clasificación de los puntos, fundamentales en el procesamiento de la información LiDAR. Seguidamente, se propone una alternativa para optimizar los modelos de procesamiento existentes, basándose en el desarrollo de algoritmos nuevos y herramientas informáticas que mejoran el rendimiento en la gestión de la información LiDAR. En la implementación, se han tenido en cuenta características y necesidades particulares de la documentación de entidades de interés patrimonial, así como los diferentes ámbitos de utilización del LiDAR, tanto aéreo como terrestre. El resultado es un organigrama de las tareas a realizar desde la nube de puntos LiDAR hasta el cálculo de los modelos digitales del terreno y de superficies. Para llevar a cabo esta propuesta, se han desarrollado hasta 19 algoritmos diferentes que comprenden implementaciones para el modelado en 2.5D y 3D, visualización, edición, filtrado y clasificación de datos LiDAR, incorporación de información de sensores pasivos y cálculo de mapas derivados, tanto raster como vectoriales, como pueden ser mapas de curvas de nivel y ortofotos. Finalmente, para dar validez y consistencia a los desarrollos propuestos, se han realizado ensayos en diferentes escenarios posibles en un proceso de documentación del patrimonio y que abarcan desde proyectos con sensores aerotransportados, proyectos con sensores terrestres estáticos a media y corta distancia, así como un proyecto con un sensor terrestre móvil. Estos ensayos han permitido definir los diferentes parámetros necesarios para el adecuado funcionamiento de los algoritmos propuestos. Asimismo, se han realizado pruebas objetivas expuestas por la ISPRS para la evaluación y comparación del funcionamiento de algoritmos de clasificación LiDAR. Estas pruebas han permitido extraer datos de rendimiento y efectividad del algoritmo de clasificación presentado, permitiendo su comparación con otros algoritmos de prestigio existentes. Los resultados obtenidos han constatado el funcionamiento satisfactorio de la herramienta. Esta tesis está enmarcada dentro del proyecto Consolider-Ingenio 2010: “Programa de investigación en tecnologías para la valoración y conservación del patrimonio cultural” (ref. CSD2007-00058) realizado por el Consejo Superior de Investigaciones Científicas y la Universidad Politécnica de Madrid. ABSTRACT: The goal of this thesis is the design, development and implementation of a system to improve the extraction of useful geometric information in Heritage documentation processes. This system is based on information provided by laser sensors, both aerial and terrestrial. Firstly, a presentation of recording geometric information for Heritage processes is done. Then, a justification of the background and problems is done too. Here, current systems for recording and analyzing the geometric information are studied. This analysis will perform the comparison with the laser system techniques, providing suggestions of use for each specific case. Next, recording systems based on laser techniques are detailed. This study starts with airborne sensors and ends with terrestrial ones, both in static and mobile application. The technical characteristics and operation of each of them are described, as well as the areas of application and generated products. Error sources are also analyzed in order to know the precision this technology can achieve. Following the presentation of the LiDAR system characteristics, the processes to generate the required information for different types of scanned objects are described; the emphasis is on the potential risks that some steps can produce. Moreover different filtering and classification algorithms are analyzed, because of their main role in LiDAR processing. Then, an alternative to optimize existing processing models is proposed. It is based on the development of new algorithms and tools that improve the performance in LiDAR data management. In this implementation, characteristics and needs of the documentation of Heritage entities have been taken into account. Besides, different areas of use of LiDAR are considered, both air and terrestrial. The result is a flowchart of tasks from the LiDAR point cloud to the calculation of digital terrain models and digital surface models. Up to 19 different algorithms have been developed to implement this proposal. These algorithms include implementations for 2.5D and 3D modeling, viewing, editing, filtering and classification of LiDAR data, incorporating information from passive sensors and calculation of derived maps, both raster and vector, such as contour maps and orthophotos. Finally, in order to validate and give consistency to the proposed developments, tests in different cases have been executed. These tests have been selected to cover different possible scenarios in the Heritage documentation process. They include from projects with airborne sensors, static terrestrial sensors (medium and short distances) to mobile terrestrial sensor projects. These tests have helped to define the different parameters necessary for the appropriate functioning of the proposed algorithms. Furthermore, proposed tests from ISPRS have been tested. These tests have allowed evaluating the LiDAR classification algorithm performance and comparing it to others. Therefore, they have made feasible to obtain performance data and effectiveness of the developed classification algorithm. The results have confirmed the reliability of the tool. This investigation is framed within Consolider-Ingenio 2010 project titled “Programa de investigación en tecnologías para la valoración y conservación del patrimonio cultural” (ref. CSD2007-00058) by Consejo Superior de Investigaciones Científicas and Universidad Politécnica de Madrid.

Diseño de los sistemas de comunicación en plantas de exploración y producción de hidrocarburos

Las plantas industriales de exploración y producción de petróleo y gas disponen de numerosos sistemas de comunicación que permiten el correcto funcionamiento de los procesos que tienen lugar en ella así como la seguridad de la propia planta. Para el presente Proyecto Fin de Carrera se ha llevado a cabo el diseño del sistema de megafonía PAGA (Public Address and General Alarm) y del circuito cerrado de televisión (CCTV) en la unidad de procesos Hydrocrcaker encargada del craqueo de hidrógeno. Partiendo de los requisitos definidos por las especificaciones corporativas de los grupos petroleros para ambos sistemas, PAGA y CCTV, se han expuesto los principios teóricos sobre los que se fundamenta cada uno de ellos y las pautas a seguir para el diseño y demostración del buen funcionamiento a partir de software específico. Se ha empleado las siguientes herramientas software: EASE para la simulación acústica, PSpice para la simulación eléctrica de las etapas de amplificación en la megafonía; y JVSG para el diseño de CCTV. La sonorización tanto de las unidades como del resto de instalaciones interiores ha de garantizar la inteligibilidad de los mensajes transmitidos. La realización de una simulación acústica permite conocer cómo va a ser el comportamiento de la megafonía sin necesidad de instalar el sistema, lo cual es muy útil para este tipo de proyectos cuya ingeniería se realiza previamente a la construcción de la planta. Además se comprueba el correcto diseño de las etapas de amplificación basadas en líneas de alta impedancia o de tensión constante (100 V). El circuito cerrado de televisión (CCTV) garantiza la transmisión de señales visuales de todos los accesos a las instalaciones y unidades de la planta así como la visión en tiempo real del correcto funcionamiento de los procesos químicos llevados a cabo en la refinería. El sistema dispone de puestos de control remoto para el manejo y gestión de las cámaras desplegadas; y de un sistema de almacenamiento de las grabaciones en discos duros (RAID-5) a través de una red SAN (Storage Area Network). Se especifican las diferentes fases de un proyecto de ingeniería en el sector de E&P de hidrocarburos entre las que se destaca: propuesta y adquisición, reunión de arranque (KOM, Kick Off Meeting), estudio in situ (Site Survey), plan de proyecto, diseño y documentación, procedimientos de pruebas, instalación, puesta en marcha y aceptaciones del sistema. Se opta por utilizar terminología inglesa dado al ámbito global del sector. En la última parte del proyecto se presenta un presupuesto aproximado de los materiales empleados en el diseño de PAGA y CCTV. ABSTRACT. Integrated communications for Oil and Gas allows reducing risks, improving productivity, reducing costs, and countering threats to safety and security. Both PAGA system (Public Address and General Alarm) and Closed Circuit Television have been designed for this project in order to ensure a reliable security of an oil refinery. Based on the requirements defined by corporate specifications for both systems (PAGA and CCTV), theoretical principles have been presented as well as the guidelines for the design and demonstration of a reliable design. The following software has been used: EASE for acoustic simulation; PSpice for simulation of the megaphony amplification loops; and JVSG tool for CCTV design. Acoustic for both the units and the other indoor facilities must ensure intelligibility of the transmitted messages. An acoustic simulation allows us to know how will be the performance of the PAGA system without installing loudspeakers, which is very useful for this type of project whose engineering is performed prior to the construction of the plant. Furthermore, it has been verified the correct design of the amplifier stages based on high impedance lines or constant voltage (100 V). Closed circuit television (CCTV) ensures the transmission of visual signals of all access to facilities as well as real-time view of the proper functioning of chemical processes carried out at the refinery. The system has remote control stations for the handling and management of deployed cameras. It is also included a storage system of the recordings on hard drives (RAID - 5) through a SAN (Storage Area Network). Phases of an engineering project in Oil and Gas are defined in the current project. It includes: proposal and acquisition, kick-off meeting (KOM), Site Survey, project plan, design and documentation, testing procedures (SAT and FAT), installation, commissioning and acceptance of the systems. Finally, it has been presented an estimate budget of the materials used in the design of PAGA and CCTV.

Desarrollo y aplicaciones de radares de alta resolución en bandas milimétricas

Las bandas de las denominadas ondas milimétricas y submilimétricas están situadas en la región del espectro entre las microondas y el infrarrojo. La banda de milimétricas se sitúa entre 30 y 300 GHz, considerada normalmente como la banda EHF (Extremely High Frequency). El margen de frecuencias entre 300 y 3000 GHz es conocido como la banda de ondas submilimétricas o de terahercios (THz). Sin embargo, no toda la comunidad científica está de acuerdo acerca de las frecuencias que limitan la banda de THz. De hecho, 100 GHz y 10 THz son considerados comúnmente como los límites inferior y superior de dicha banda, respectivamente. Hasta hace relativamente pocos años, la banda de THz sólo había sido explotada para aplicaciones en los campos de la espectroscopía y la radioastronomía. Los avances tecnológicos en la electrónica de microondas y la óptica lastraron el desarrollo de la banda de THz. Sin embargo, investigaciones recientes han demostrado las ventajas asociadas a operar en estas longitudes de onda, lo que ha aumentado el interés y los esfuerzos dedicados a la tecnología de THz. A pesar de que han surgido un gran número de aplicaciones, una de las más prometedoras está en el campo de la vigilancia y la seguridad. Esta tesis está dedicada al desarrollo de radares de onda continua y frecuencia modulada (CW-LFM) de alta resolución en la banda de milimétricas, más concretamente, en las ventanas de atenuación situadas en 100 y 300 GHz. Trabajar en estas bandas de frecuencia presenta beneficios tales como la capacidad de las ondas de atravesar ciertos materiales como la ropa o el papel, opacos en el rango visible, y la posibilidad de usar grandes anchos de banda, obteniéndose así elevadas resoluciones en distancia. Los anchos de banda de 9 y 27 GHz seleccionados para los sistemas de 100 y 300 GHz, respectivamente, proporcionan resoluciones en distancia alrededor y por debajo del cm. Por otro lado, las aplicaciones objetivo se centran en la adquisición de imágenes a corto alcance. En el caso del prototipo a 300 GHz, su diseño se ha orientado a aplicaciones de detección a distancia en escenarios de vigilancia y seguridad. La naturaleza no ionizante de esta radiación supone una ventaja frente a las alternativas tradicionalmente usadas tales como los sistemas de rayos X. La presente tesis se centra en el proceso de diseño, implementación y caracterización de ambos sistemas así como de la validación de su funcionamiento. Se ha elegido una solución basada en componentes electrónicos, y no ópticos, debido a su alta fiabilidad, volumen reducido y amplia disponibilidad de componentes comerciales. Durante el proceso de diseño e implementación, se han tenido en cuenta varias directrices tales como la minimización del coste y la versatilidad de los sistemas desarrollados para hacer posible su aplicación para múltiples propósitos. Ambos sistemas se han utilizado en diferentes pruebas experimentales, obteniendo resultados satisfactorios. Aunque son sólo ejemplos dentro del amplio rango de posibles aplicaciones, la adquisición de imágenes ISAR de modelos de blancos a escala para detección automática así como la obtención de datos micro-Range/micro- Doppler para el análisis de patrones humanos han validado el funcionamiento del sistema a 100 GHz. Por otro lado, varios ejemplos de imágenes 3D obtenidas a 300 GHz han demostrado las capacidades del sistema para su uso en tareas de seguridad y detección a distancia. ABSTRACT The millimeter- and submillimeter-wave bands are the regions of the spectrum between the microwaves and the infrared (IR). The millimeter-wave band covers the range of the spectrum from 30 to 300 GHz, which is usually considered as the extremely high frequency (EHF) band. The range of frequencies between 300 and 3000 GHz is known as the submillimeter-wave or terahertz (THz) band. Nevertheless, the boundaries of the THz band are not accepted by the whole research community. In fact, 100 GHz and 10 THz are often considered by some authors as the lower and upper limit of this band, respectively. Until recently, the THz band had not been exploited for practical applications, with the exception of minor uses in the fields of spectroscopy and radio astronomy. The advancements on microwave electronics and optical technology left the well-known THz gap undeveloped. However, recent research has unveiled the advantages of working at these frequencies, which has motivated the increase in research effort devoted to THz technology. Even though the range of upcoming applications is wide, the most promising ones are in the field of security and surveillance. Particularly, this Ph.D. thesis deals with the development of high resolution continuouswave linear-frequency modulated (CW-LFM) radars in the millimeter-wave band, namely, in the attenuation windows located at 100 and 300 GHz. Working at these wavelengths presents several benefits such as the ability of radiation to penetrate certain materials, visibly opaque, and the great availability of bandwidth at these frequencies, which leads to high range resolution. The selected bandwidths of 9 and 27 GHz for these systems at 100 and 300 GHz, respectively, result in cm and sub-cm range resolution. On the other hand, the intended applications are in the field of short-range imaging. In particular, the design of the 300-GHz prototype is oriented to standoff detection for security and surveillance scenarios. The non-ionizing nature of this radiation allows safety concerns to be alleviated, in clear contrast to other traditional alternatives such as X-rays systems. This thesis is focused on the design, implementation and characterization process of both systems as well as the experimental assessment of their performances. An electronic approach has been selected instead of an optical solution so as to take advantage of its high reliability, reduced volume and the availability of commercial components. Through the whole design and implementation process, several guidelines such as low cost and hardware versatility have been also kept in mind. Taking advantage of that versatility, different applications can be carried out with the same hardware concept. Both radar systems have been used in several experimental trials with satisfactory results. Despite being mere examples within the wide range of fields of application, ISAR imaging of scaled model targets for automatic target recognition and micro-Range/micro-Doppler analysis of human patterns have validated the system performance at 100 GHz. In addition, 3D imaging examples at 300 GHz demonstrate the radar system’s capabilities for standoff detection and security tasks.

El Entorno Aumentado: Imperativo informacional para una ecología digital de lo arquitectónico

Esta tesis se suma a los intentos teóricos de clarificar la impronta del dominio digital en lo arquitectónico. Propone una cartografía crítica para reconstruir el proceso de tal convergencia considerando aquellos acontecimientos reveladores que lo han pautado. La integración de la extensión digital propia las tecnologías de la información y la comunicación en el contexto tradicional arquitectónico ha supuesto el advenimiento de un ecosistema artificial complejo. A esta realidad o proceso concurrente se la denomina el Entorno Aumentado. La línea principal de investigación explora el desarrollo de la interacción hombre-máquina, en sendas trayectorias sincrónicas convergentes. El análisis se aborda por tanto desde la consideración de esa naturaleza dual, atendiendo simultáneamente a la humanización del dominio digital o cómo la computación se adapta a la condición natural de ser humano, y a la digitalización del ser humano o cómo éste asume el imperativo digital. El análisis resulta vertebrado desde la condición panóptica del punto de observación del acontecimiento: la cuarta pared, entendida como pantalla y punto de inflexión que estructura la convergencia de los entornos físico y digital. La reflexión acometida sobre la construcción del Entorno Aumentado procura la verificación de la tesis, que es central en esta investigación: la multiplicación dimensional del lugar físico mediante su extensión con un campo informacional procedente del dominio digital, y sus efectos en la construcción de la nueva ecología digital propia del Entorno Aumentado. Esta circunstancia se produce tras la eclosión de la Revolución Digital en la segunda mitad del siglo XX, el consecuente incremento de la interacción entre los entornos digital y físico, y el alcance de un nivel superior de comunicación en los procesos arquitectónicos. Los síntomas del Entorno Aumentado se hacen notar en nuestra contemporaneidad; en ese sentido, la tesis alcanza un diagnóstico del cambio. La fractura y obsolescencia del límite espacio-temporal establecido por las dicotomías históricas privado-público, casa-ciudad, trabajo-ocio,…etc., o la vigencia del proyecto procedimental son algunas de sus consecuencias en el modo de abordar la disciplina arquitectónica. Abstract This dissertation aims to complete the theoretical attempts to clarify the digital domain imprint on the architectural realm. It constructs a critical cartography to reconstruct the process of such convergence, considering those principal events who have scheduled it. The integration of TIC’s digital extension through the traditional architectural context has meant the advent of an artificial complex ecosystem. This reality or concurrent process is called The Augmented Environment. The key research attempt explores man-machine interaction process in both synchronous converging trajectories. The analysis therefore addresses from the consideration of this dual nature, focusing simultaneously in humanizing digital domain process or how the computer fits the natural condition of human beings, and in digitalizing human beings or how it affords the digital imperative. The analysis is structured from the panoptic condition of the event scope: the fourth wall as screen that structures the convergence of physical and digital environments. The examination of The Augmented Environment’s assembly pretends the verification of the central point of this research: the dimensional multiplication of physical space by extending informational fields from the digital domain, and its effects on the construction of the Augmented Environment new digital ecology. This circumstance occurs after the arrival of the Digital Revolution in the second half of the twentieth century, with the consequent increase in the interaction between digital and physical environments, and the reach of a higher level of communication in architectural processes. The Augmented Environment signs are alive nowadays; in that sense, the thesis reaches a diagnostic of the changes. The fracture and obsolescence of the time-space limit established by historic dichotomies as private-public, home-city, working-leisure...etc., or the validity of the procedural design are some of its consequences on the architectural discipline.