Analytical benchmark solutions for steel frame structures subject to local buckling effects

Application of "advanced analysis" methods suitable for non-linear analysis and design of steel frame structures permits direct and accurate determination of ultimate system strengths, without resort to simplified elastic methods of analysis and semi-empirical specification equations. However, the application of advanced analysis methods has previously been restricted to steel frames comprising only compact sections that are not influenced by the effects of local buckling. A research project has been conducted with the aim of developing concentrated plasticity methods suitable for practical advanced analysis of steel frame structures comprising non-compact sections. This paper contains a comprehensive set of analytical benchmark solutions for steel frames comprising non-compact sections, which can be used to verify the accuracy of simplified concentrated plasticity methods of advanced analysis. The analytical benchmark solutions were obtained using a distributed plasticity shell finite element model that explicitly accounts for the effects of gradual cross-sectional yielding, longitudinal spread of plasticity, initial geometric imperfections, residual stresses, and local buckling. A brief description and verification of the shell finite element model is provided in this paper.

Why ADR must be a mandatory subject in the law degree - the profession

The Australian legal profession, as well as the content and pedagogy of legal education across Australia, are steeped in tradition and conservatism. Indeed, the legal profession and our institutions of legal education are in a relationship of mutual influence which leaves the way we teach law resistant to change. There has traditionally been pushback against the notion that dispute resolution should have a place amongst black letter law subjects in the legal curriculum. This paper argues that this position cannot be maintained in the modern legal climate. We challenge legal education orthodoxy and promote NADRAC’s position that alternative dispute resolution should be a compulsory, stand alone subject in the law degree. We put forward ten simple arguments as to why every law student should be exposed to a semester long course of DR instruction.

Why ADR must be a mandatory subject in the law degree - the academy

The profession of law is deeply steeped in tradition and conservatism. The content and pedagogy employed in law faculties across Australia is similarly steeped in tradition and conservatism. Indeed, the practice of law and our institutions of legal education are in a relationship of mutual influence; a dénouement which preserves the best aspects of our common law legal system, but also leaves the way we educate, practice, and think about the role of law, resistant to change. In this article, we lay down a challenge to legal education orthodoxy and a call to arms for legal academic progressivists. It is our simple argument that alternative dispute resolution should be a compulsory, stand alone subject in the law degree. There has been traditional pushback against the notion that alternative dispute resolution should have a place amongst black letter law subjects in the legal curriculum. This position cannot be maintained in the modern day legal climate. We put forward ten simple arguments as to why every law student should be exposed to a semester long course of ADR instruction. With respect to relationships of mutual influence, whether legal education should assimilate the practise of law, or shape the practise of law makes no difference here. Both views necessitate the inclusion of ADR as a compulsory subject in the law degree.

Capping them off! Exploring and explaining the patterns in undergraduate capstone subjects in Australian business schools

Universities are increasingly offering capstone subjects as part of curricula to prepare final year undergraduates for employment through consolidating and integrating their knowledge and skills while bridging the gap between academic learning and professional work. This study investigates capstone subjects offered by Australian business schools, drawing on national survey data collected in 2010-2011, complemented by interviews with associate deans teaching and learning instrumental in course and curricula design. Findings indicate the sector-wide use of capstone subjects in business disciplines, diversity in the patterns of offerings, and instances where subjects labelled as capstones do not meet the definition of capstones. We argue that these features are explained by a range of historic and strategic factors, such as the ad hoc development of subjects and a lack of understanding of the features of capstones. The findings of this paper inform the debate on the design, development, value and use of capstone subjects identifying the implications for staff development and knowledge management in higher education.

Bringing the real world into university learning

Introduction: As part of ongoing quality assurance, all university programs must be regularly reviewed to ensure curriculum is current, meets university and national standards, and for medical science, criteria for AIMS Accreditation. With recent developments at the national and international level also signaling change, a course design team (CDT) was assembled and tasked with developing and implementing a new four year Bachelor of Medical Laboratory Science (BMLS) course at QUT. Method: A whole-of-course approach was adopted, incorporating inverted curriculum and Capstone experience. First, course vision and desired graduate profile are defined as course learning outcomes (CLO), i.e. skills, knowledge, behaviours and attributes graduates must demonstrate. CLO are then back-mapped into introductory, developmental and expected phases from fourth to first year on a course plan and assessment map. Unit learning outcomes (ULO) are then defined, and finally, each unit (subject) designed, directly aligned with assessment. Results: The resulting BMLS course represents a deliberate program of study across four years, which from day one, focuses on the professional aspects of MLS, clinical pathology disciplines, and incrementally developing and assessing the skills, knowledge, behaviours and attributes required to undertake the Work Integrated Learning Internship (WILI) and Capstone experience in final year, and subsequently, graduate from the program. Conclusions: At the start of the year, the BMLS commenced with higher than anticipated enrolments. To date, survey data and feedback is positive, with particular emphasis on the directed nature of the course. The method of course design also ensures university/national standards, and criteria for AIMS Accreditation have been met.

Curriculum renewal in legal education

This project investigated ways in which the learning experience for students in Australian law schools could be enhanced by renewing final year legal curriculum through the design of effective capstone experiences to close the loop on tertiary legal studies and better prepare students for a smooth transition into the world of work and professional practice. Key project outcomes are a set of final year curriculum design principles and a transferable model for an effective final year program – a final year Toolkit comprising a range of templates, models and specific capstone examples for adoption or adaptation by legal educators. The project found that the efficacy of capstone experiences is affected by the curriculum context within which they are offered. For this reason, a number of ‘favourable conditions’, which promote the effectiveness of capstone experiences, have also been identified. The project’s final year principles and Toolkit promote program coherence and integration, should increase student satisfaction and levels of engagement with their experience of legal education and make a valuable contribution to assurance of learning in the new Tertiary Education Quality and Standards Agency (TEQSA) environment. From the point of view of the student experience, the final year principles and models address the current fragmented approach to final year legal curricula design and delivery. The knowledge and research base acquired under the auspices of this project is of both discipline and national importance as the project’s outcomes are transferable and have the potential to significantly influence the quality and coherence of the program experience of final year students in other tertiary disciplines, both within Australia and beyond. Project outcomes and deliverables are available on both the project’s website http://wiki.qut.edu.au/display/capstone/Home and on the Law Capstone Experience Forum website http://www.lawcapstoneexperience.com/. In the course of developing its deliverables, the project found that the design of capstone experiences varies significantly within and across disciplines; different frameworks may be used (for example, a disciplinary or inter-disciplinary focus, or to satisfy professional accreditation requirements), rationales and objectives may differ, and a variety of models utilised (for example, an integrated final year program, a single subject, a suite of subjects, or modules within several subjects). Broadly however, capstone experiences should provide final year students with an opportunity both to look back over their academic learning, in an effort to make sense of what they have accomplished, and to look forward to their professional and personal futures that build on that foundational learning.

Accountancy capstone : enhancing integration and professional identity

Capstone units are generally seen to have three main aims: integrating the program, reflecting on prior learning, and transitioning into the workplace. However, research indicates that most programs do not achieve outcomes in all three areas with Henscheid (2000) revealing that integration is the major goal of many capstone programs. As well, in the accounting education literature there has been little empirical evidence relating to the effectiveness of student learning as a result of implementing a capstone unit. This study reports on the development and implementation of an accountancy capstone unit at the Queensland University of Technology (QUT), which began in 2006. The main features of this capstone unit are: the use of problem-based learning (PBL); integration of the program; the development of a professional identity whereby classes are broken up into groups of a maximum of five students who take on the persona of a professional accounting firm for an entire semester; and the students, acting as professional advisors within that firm, are required to solve a series of unstructured, multi-dimensional accounting problems based on limited given facts. This process is similar to a professional advisor asking a client about the facts relating to the particular problem of the client and then solving the problem. The research was conducted over nine semesters and involved the collection of both quantitative and qualitative data from a student questionnaire. The results indicate that in terms of student perceptions, the capstone unit was very effective in enhancing integration of the program and enhancing professional identity thereby assisting student transition into the professional accounting workplace. Our approach therefore meets two of the three generally accepted aims of a capstone unit. With accounting educators striving to maximise student learning from a finite set of resources, this approach using PBL has resulted in improved learning outcomes for accounting students about to enter the workplace as professionals.

Experimental studies of hollow flange channel beams subject to combined bending and shear actions

This paper presents the details of an experimental study of a cold-formed steel hollow flange channel beam known as LiteSteel Beam (LSB) subject to combined bending and shear actions. The LSB sections are produced by a patented manufacturing process involving simultaneous cold-forming and electric resistance welding. Due to the geometry of the LSB, as well as its unique residual stress characteristics and initial geometric imperfections resultant of manufacturing processes, much of the existing research for common cold-formed steel sections is not directly applicable to LSB. Experimental and numerical studies have been carried out to evaluate the behaviour and design of LSBs subject to pure bending actions and predominant shear actions. To date, however, no investigation has been conducted into the strength of LSB sections under combined bending and shear actions. Combined bending and shear is especially prevalent at the supports of continuous span and cantilever beams, where the interaction of high shear force and bending moment can reduce the capacity of a section to well below that for the same section subject only to pure shear or moment. Hence experimental studies were conducted to assess the combined bending and shear behaviour and strengths of LSBs. Eighteen tests were conducted and the results were compared with current AS/NZS 4600 and AS 4100 design rules. AS/NZS 4600 design rules were shown to grossly underestimate the combined bending and shear capacities of LSBs and hence two lower bound design equations were proposed based on experimental results. Use of these equations will significantly improve the confidence and cost-effectiveness of designing LSBs for combined bending and shear actions.

Within-subject intra- and inter-method consistency of two experimental risk attitude elicitation methods

We compare the consistency of choices in two methods used to elicit risk preferences on an aggregate as well as on an individual level. We ask subjects to choose twice from a list of nine decisions between two lotteries, as introduced by Holt and Laury (2002, 2005) alternating with nine decisions using the budget approach introduced by Andreoni and Harbaugh (2009). We find that, while on an aggregate (subject pool) level the results are consistent, on an individual (within-subject) level, behaviour is far from consistent. Within each method as well as across methods we observe low (simple and rank) correlations.

Nonrigid face alignment for unknown subject in video

Non-rigid face alignment is a very important task in a large range of applications but the existing tracking based non-rigid face alignment methods are either inaccurate or requiring person-specific model. This dissertation has developed simultaneous alignment algorithms that overcome these constraints and provide alignment with high accuracy, efficiency, robustness to varying image condition, and requirement of only generic model.

A CLASS act : the teaching team approach to subject coordination

Advancing the development of good practice around the teaching team has been the focus of a recently completed, nationally funded Australian grant entitled Coordinators Leading Advancement of Sessional Staff (CLASS). The project focused on developing leadership capacity of subject coordinators to provide supportive contexts for sessional staff to enhance their knowledge of teaching practice and contribute to subject improvement through a team approach. An action learning approach and notions of distributed leadership underpinned the activities of the teaching teams in the program. This paper provides an overview of a practical approach, led by the subject coordinator, to engaging sessional staff through the facilitation of a supportive network within the teaching team. It addresses some of the gaps identified in the recent literature which includes lack of role clarity for all members of the team and provides some examples of initiatives that teams engaged with to address some of the challenges identified. Resources to support this approach were developed and are shared through the project website. Recommendations for future direction include improved policy and practice at the institutional level, better recognition and reward for subject coordinators and resourcing to support the participation and professional development needs of sessional staff.

The subject and architecture

Invited Presentation on my book Architecture for a Free Subjectivity. In March of 1982, Skyline, the Institute for Architecture and Urban Studies serial, published the landmark interview between Paul Rabinow, an American anthropologist, and Michel Foucault, which would only appear two years later under the title “Space, Knowledge, and Power,” in Rabinow’s edited book The Foucault Reader. Foucault said that in the spatialization of knowledge and power beginning in the 18th century, architecture is not a signifier or metaphor for power, it is rather the “technique for practising social organization.” The role of the IAUS in the architectural dissemination of Foucault’s ideas on the subject and space in the North American academy – such as the concept “heterotopia,” and Foucault’s writing on surveillance and Jeremy Bentham’s Panopticon, subsequently analysed by Georges Teyssot, who was teaching at the Venice School – is well known. Teyssot’s work is part of the historical canalization of Foucauldianism, and French subjectivity more broadly, along its dizzying path, via Italy, to American architecture schools, where it solidified in the 1980s paradigm that would come to be known as American architecture theory. Foucault was already writing on incarceration and prisons, from the 1970s. (In the 1975 lectures he said “architecture was responsible for the invention of madness.”) But this work was not properly incorporated into architectural discussion until the early ’80s. What is not immediately apparent, what this history suggests to me is that subjectivity was not a marginal topic within “theory”, but was perhaps a platform and entry point for architecture theory. One of the ideas that I’m working on is that “theory” can be viewed, historically, as the making of architectural subjectivity, something that can be traced back to the Frankfurt School critique which begins with the modern subject...

Why ADR must be a mandatory subject in the law degree : A cheat sheet for the willing and a primer for the non-believer

The profession of law is deeply steeped in tradition and conservatism, which influences the content and pedagogy employed in law faculties across Australia. Indeed, the practice of law and the institutions of legal education are in a relationship of mutual influence; a dénouement which preserves the best aspects of the common law legal system, but also leaves the way we educate, practice and think about the role of law resistant to change. In this article, the authors lay down a challenge to legal education orthodoxy and a call to arms for legal academic progressivists: that alternative dispute resolution (ADR) should be a compulsory, stand alone subject in the law degree. The authors put forward 10 simple arguments as to why every law student should be exposed to a semester-long course of ADR instruction.