Development of a method for sampling and determination of corrosion inhibitors in modified atmospheres

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Monitoramento do perfil microbiológico de dentes com infecção endodôntica primária durante terapia com diferentes medicações intracanal

Pós-graduação em Odontologia Restauradora - ICT

Occurrence of socransky red complex in pregnant women with and without periodontal disease

Purpose: To verify the presence of Socransky Red Complex (Porphyromonas gingivalis, Treponema denticola and Tannerella forsythia) and P. intermedia using polymerase chain reaction (PCR) in periodontally healthy pregnant women and pregnant women with periodontal disease, as well as its relation to arterial blood pressure and capillary glycaemia.Materials and Methods: This case control study included 86 pregnant women, including 50 pregnant women with healthy periodontium, 27 with gingivitis and 9 with periodontitis. Arterial blood pressure and glycaemia were evaluated and recorded. Clinical specimens from the gingival crevice or periodontal pockets were gathered with sterile absorbent paper cones. DNA extraction was accomplished using the Easy-DNA Kit test and the presence of bacteria was detected by PCR with primers and specific probes for each microorganism.Results: The arterial pressure of all pregnant women was found to be within normal levels and 51% presented with hyperglycaemia, these two variables were not associated with periodontal conditions and/or presence of microorganisms. Socransky Red Complex was not present in pregnant women with healthy periodontium; however, it was present in pregnant women with gingivitis (3.7%) and in a higher percentage of pregnant women with periodontitis (33.3%).Conclusion: Socransky Red Complex was found only in cases of periodontal diseases and is not related to blood pressure and/or high levels of blood glucose.

Quality assessment of eggs packed under modified atmosphere

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Abrasion resistance of direct and indirect resins as a function of a sealant veneer

Abrasive wear is one of the most common type of wear that not only affect teeth, as also dental restorations. Thus to investigate one of the etiological factors as tooth brushing procedure is clinical relevant in order to select the best material combination that may prevent damage of resin dental restoration's abrasion. This study evaluated the influence of tooth brushing on mass loss and surface roughness of direct Venus (Vs) and indirect Signum (Sg) resin composites, with and without a surface sealant, Fortify (F). Twenty-four specimens were prepared with each resin composite, using their proprietary curing units, according to manufacturer's instructions. All the specimens were polished and ultrasonically cleaned in distilled water for 5 minutes. Half of the specimens of each resin (n = 12) were covered with F (Vs F and Sg F ), except for the control (C) specimens (Vs C and Sg C ), which were not sealed. Mass loss (ML) as well as surface roughness (Ra ) was measured for all the specimens. Then, the specimens were subjected to toothbrush-dentifrice abrasion, using a testing machine for 67.000 brushing strokes, in an abrasive slurry. After brushing simulation, the specimens were removed from the holder, rinsed thoroughly and blot dried with soft absorbent paper. The abrasion of the material was quantitatively determined with final measurements of ML and surface roughness, using the method described above. ML data were analyzed by two-way analysis of variance (ANOVA) and the analysis indicated that resin composites were not statistically different; however, the specimens sealed with F showed higher ML. Ra mean values of the groups Vs F and Sg F significantly increased. Tooth brushing affects mainly the roughness of the direct and indirect resin composites veneered with a sealant.

Effect of collagen matrix saturation on the surface free energy of dentin using different agents

The surface free energy of conditioned-dentin is one of the factors that interfere with monomeric infiltration of the interfibrillar spaces. Saturation of the tooth matrix with different substances may modulate this energy and, consequently, the wettability of the dentin. To evaluate the influence of different substances used to saturate conditioned-dentin on surface free energy (SFE) of this substrate. Dentin blocks (4 × 7 × 1 mm, n = 6/ group), obtained from the roots of bovine incisors, were etched using phosphoric acid for 15 seconds, rinsed and gently dried. The surfaces were treated for 60 seconds with: ultra-purified water (H20-control); ethanol (EtOH), acetone (ACT), chlorhexidine (CHX), ethylenediaminetetraacetic acid (EDTA); or sodium hypochlorite (NaOCl). The tooth surfaces were once again dried with absorbent paper and prepared for SFE evaluation using three standards: water, formamide and bromonaphthalene. Analysis of variance (ANOVA) and Dunnet's tests (a = 0.05) were applied to the data. Ethylenediaminetetraacetic acid was the only substance that caused a change to the contact angle for the standards water and formamide, while only EtOH influenced the angles formed between formamide and the dentin surface. None of the substances exerted a significant effect for bromonaphtha-lene. In comparison to the control, only EDTA and NaOCl altered both polar components of the SFE. Total SFE was increased by saturation of the collagen matrix by EDTA and reduced when NaOCl was used. Saturation of the collagen matrix by EDTA and EtOH changed the surface free energy of the dentin. In addition, the use of NaOCl negatively interfered with the properties evaluated. The increase of surface free energy and wettability of the dentin surface would allow higher penetration of the the adhesive system, which would be of importance to the clinical success of resin-dentin union.

Classe mollicutes na boca de pacientes com dependência química

Drug addiction is one of the biggest public health problems worldwide, not only by the dimensions of the problem, but also by the severity of the damage, creating favorable conditions for opportunistic microorganisms such as class Mollicutes. This study aims to evaluate the presence of the main species and genera of this group in the subgingival biofilm of drug addiction patients, comparing them with non-dependent subjects. For this purpose, data on systemic health conditions, socioeconomic characteristics, drug addiction from 72 patients with drug addiction kept in rehab clinics and 100 non-dependent patients who formed the control group were obtained. Intra and extraoral clinical examinations were performed and samples of subgingival plaque were collected through sterile absorbent paper cones. The presence of different genera and species of the class Mollicutes was evaluated by PCR using the specific primers and conditions for each microorganism. The statistical analysis was performed using the Chi-square test for comparisons of three or more variables and the Mann-Whitney test, with significance level of 5%. Out of species and genera evaluated, Mycoplasma salivarium showed correlation with gingival inflammation in both patient groups and was more frequently detected among drug addiction patients

Influência do tabagismo nos níveis de catelicidina e alfadefensinas no fluido gengival de pacientes com periodontite crônica

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Influence of the deposition parameters on the morphology and electrical conductivity of PANI/PSS self-assembled films

The influence of deposition parameters, namely polymer concentration and pH of the deposition solution, cleaning, and drying steps on the morphology and electrical characteristics of polyaniline and sulfonated polystyrene (PANI/PSS) nanostructured films deposited by the self-assembly technique is evaluated by UV-Vis spectroscopy, optical and atomic force microscopy, and electrical resistance measurements. It is found that stirring the cleaning solution during the cleaning step is crucial for obtaining homogenous films. Stirring of the cleaning solution also influences the amount of PANI adsorbed in the films. In this regard, the drying process seems to be less critical since PANI amount and film thickness are similar in films dried with N-2 flow or with an absorbent tissue. It is observed, however, that drying with N-2 flow results in rougher films. As an additional point, an assessment of the influence of the deposition method (manual versus mechanical) on the film characteristics was carried out. A significant difference on the amount of PANI and film thickness between films prepared by different human operators and by a homemade mechanical device was observed. The variability in film thickness and PANI adsorbed amount is smaller in films mechanically assembled. (c) 2007 Elsevier B.V. All rights reserved.

La ville comme labyrinthe: réécritures d'un mythe entre les années 1950 et 1980

Entre les années 1950 et 1980, émerge une nouvelle forme de labyrinthe chez des romanciers européens comme Michel Butor, Alain Robbe-Grillet, Italo Calvino, Patrick Modiano et Alasdair Gray : un labyrinthe insaisissable et non cartographiable. Pour en rendre compte nous avons recours au modèle du rhizome, issu de la philosophie de Gilles Deleuze et de Félix Guattari, aussi bien qu'au concept d'hétérotopie de Michel Foucault. La spatialité de nos romans nous pousse à prendre en compte également les réécritures ironiques du mythe de Thésée, Ariane, le Minotaure, Dédale. Les citations et les allusions au mythe nous font remarquer la distance d'avec le modèle traditionnel et les effets de ce qu'on peut considérer comme un « bricolage mythique », dans le cadre d'un regard ironique, parodique ou satirique. La représentation romanesque du labyrinthe accentue d'un côté l'absence d'un centre, et de l'autre côté l'ouverture extrême de cet espace qu'est la ville contemporaine. En même temps, la présence de nombreux « espaces autres », les hétérotopies de Foucault, définit l'égarement des protagonistes des romans. Au fur et à mesure que les écrivains acquièrent conscience des caractéristiques « labyrinthiques » de ces espaces, celles-ci commencent à informer l'œuvre romanesque, créant ainsi un espace métafictionnel. Entre les années Cinquante et le début des années Soixante-dix, les Nouveaux romanciers français accentuent ainsi l'idée de pouvoir jouer avec les instruments de la fiction, pour exaspérer l'absence d'un sens dans la ville comme dans la pratique de l'écriture. Calvino reformule cette conception du roman, remarquant l'importance d'un sens, même s'il est caché et difficile à saisir. Pour cette raison, à la fin de l'époque que nous analysons, des auteurs comme Modiano et Gray absorbent les techniques d'écriture de ces prédécesseurs, en les faisant jouer avec la responsabilité éthique de l'auteur.

A Novel Approach to Carbon Dioxide Capture and Storage

The novel approach to carbon capture and storage (CCS) described in this dissertation is a significant departure from the conventional approach to CCS. The novel approach uses a sodium carbonate solution to first capture CO2 from post combustion flue gas streams. The captured CO2 is then reacted with an alkaline industrial waste material, at ambient conditions, to regenerate the carbonate solution and permanently store the CO2 in the form of an added value carbonate mineral. Conventional CCS makes use of a hazardous amine solution for CO2 capture, a costly thermal regeneration stage, and the underground storage of supercritical CO2. The objective of the present dissertation was to examine each individual stage (capture and storage) of the proposed approach to CCS. Study of the capture stage found that a 2% w/w sodium carbonate solution was optimal for CO2 absorption in the present system. The 2% solution yielded the best tradeoff between the CO2 absorption rate and the CO2 absorption capacity of the solutions tested. Examination of CO2 absorption in the presence of flue gas impurities (NOx and SOx) found that carbonate solutions possess a significant advantage over amine solutions, that they could be used for multi-pollutant capture. All the NOx and SOx fed to the carbonate solution was able to be captured. Optimization studies found that it was possible to increase the absorption rate of CO2 into the carbonate solution by adding a surfactant to the solution to chemically alter the gas bubble size. The absorption rate of CO2 was increased by as much as 14%. Three coal combustion fly ash materials were chosen as the alkaline industrial waste materials to study the storage CO2 and regeneration the absorbent. X-ray diffraction analysis on reacted fly ash samples confirmed that the captured CO2 reacts with the fly ash materials to form a carbonate mineral, specifically calcite. Studies found that after a five day reaction time, 75% utilization of the waste material for CO2 storage could be achieved, while regenerating the absorbent. The regenerated absorbent exhibited a nearly identical CO2 absorption capacity and CO2 absorption rate as a fresh Na2CO3 solution.

STRUCTURAL CONTROL OF A SMALL-SCALE TEST-BED SHAKER STRUCTURE USING A SPONGE-TYPE MAGNETO-RHEOLOGICAL FLUID DAMPER

Semi-active damping devices have been shown to be effective in mitigating unwanted vibrations in civil structures. These devices impart force indirectly through real-time alterations to structural properties. Simulating the complex behavior of these devices for laboratory-scale experiments is a major challenge. Commercial devices for seismic applications typically operate in the 2-10 kN range; this force is too high for small-scale testing applications where requirements typically range from 0-10 N. Several challenges must be overcome to produce damping forces at this level. In this study, a small-scale magneto-rheological (MR) damper utilizing a fluid absorbent metal foam matrix is developed and tested to accomplish this goal. This matrix allows magneto-rheological (MR) fluid to be extracted upon magnetic excitation in order to produce MR-fluid shear stresses and viscosity effects between an electromagnetic piston, the foam, and the damper housing. Dampers for uniaxial seismic excitation are traditionally positioned in the horizontal orientation allowing MR-fluid to gather in the lower part of the damper housing when partially filled. Thus, the absorbent matrix is placed in the bottom of the housing relieving the need to fill the entire device with MR-fluid, a practice that requires seals that add significant unwanted friction to the desired low-force device. The damper, once constructed, can be used in feedback control applications to reduce seismic vibrations and to test structural control algorithms and wireless command devices. To validate this device, a parametric study was performed utilizing force and acceleration measurements to characterize damper performance and controllability for this actuator. A discussion of the results is presented to demonstrate the attainment of the damper design objectives.

Flying capacity of Psyttalia concolor and Chrysoperla carnea under a UV-absorbing net (Bionet®) in presence and absence of crop.

Field studies were conducted in walk-in tunnels to determine the flying capacity in the presence and absence of crop, of the parasitoid Psyttalia concolor and the predator Chrysoperla carnea under a UV-absorbent net (Bionet®). Yellow sticky cards were used for insect recovery but neither P. concolor nor C. carnea were very attracted to them, thus captures were too low to permit any meaningful comparisons. Bionet® did not seem to affect the mobility of any natural enemy irrespective of the trap location and monitoring hour. Climatic conditions inside nets were very extreme (average temperatures very high and relative humidity very low) threatening insect survival. New experiments are being developed, trying to find new attractants that permit a significant capture of both natural enemies.

Estudio y diseño de sistemas para el acondicionamiento acústico

La acústica arquitectónica es la rama de la acústica que se dedica al estudio y control del campo sonoro en espacios destinados a la música y la palabra. Esta ciencia tiene la finalidad de recrear las mejores condiciones de escucha en una sala. Las cualidades acústicas que debe tener un espacio varían en función de diversos factores, como el tipo de señal reproducida, la actividad que se va a desarrollar en la sala o incluso los gustos, preferencias y costumbres del público. El acondicionamiento acústico es el proceso destinado a imprimir ese carácter acústico a la sala por medio de materiales y sistemas con propiedades absorbentes y difusoras. El trabajo está dedicado íntegramente al estudio de sistemas absorbentes y difusores para el acondicionamiento acústico de salas y pretende ser una guía para el diseño creativo de este tipo de sistemas. El trabajo incluye una parte teórica, en la que se desarrollan los conceptos sobre acústica de salas, absorbentes y difusores; y otra práctica, que incluye el diseño de un sistema acústico mixto absorbente-difusor, las correspondientes medidas de absorción y difusión y las simulaciones. Para estas últimas se emplean tanto modelos teóricos como software de predicción del campo sonoro por elementos de contorno (BEM). ABSTRACT. Architectural acoustics is the branch of acoustics that studies the sound field and his control in spaces devoted to music and speech. This science is aimed at reproducing the best listening conditions in a room. The acoustic qualities a enclosure must have vary depending upon several factors, as type of reproduced signal, the kind of activity in the room or even the preferences and customs of audience. Acoustic conditioning is the process that seeks to impress that acoustic character to the room by means of materials and devices with absorbent and diffusion properties. The monograph is entirely aimed at studying absorbent and diffusing devices for acoustic room conditioning and tries to be a guide for creative design of this type of devices. This monograph contains part of theory, which develops the concepts about room acoustics, absorbers and diffusers; and an experimental part, which includes the design of an hybrid absorber-diffuser acoustic device, the corresponding measures of absorption and diffusion and the simulations. For the last are used theoretical models and boundary elements (BEM) software for sound field prediction.

Análisis de las causas de dispersión en los resultados de las medidas del coeficiente de absorción acústica en cámara reverberante

El objetivo del presente Trabajo Fin de Máster es llevar a cabo un estudio de las causas de la precisión de los resultados de las medidas del coeficiente de absorción acústica en cámara reverberante, siguiendo el procedimiento descrito en la norma UNE-EN ISO 354 “Medición de la absorción acústica en una cámara reverberante”. En primer lugar, se han estudiado los fundamentos teóricos relacionados con el método de ensayo. A continuación, se ha detallado dicho método y se ha aplicado a un caso práctico con la instrumentación disponible en el laboratorio de Acústica de la Escuela. Puesto que el resultado de un ensayo únicamente se halla completo cuando está acompañado de una declaración acerca de la incertidumbre de dicho resultado, en el presente trabajo se ha aplicado a este método de ensayo, tanto el enfoque clásico de la GUM, como el método de Monte Carlo, para evaluar la incertidumbre y comparar los resultados obtenidos mediante las dos metodologías. Para estudiar la influencia que produce en el campo sonoro de una cámara reverberante la introducción de un material absorbente en su interior, se realizó un estudio mediante trazado de rayos de la cámara reverberante del CEIS. ABSTRACT The objective of this Master's Thesis is to study the causes of accuracy of the measurements results of sound absorption coefficient in a reverberation room, according to the procedure of standard UNE-EN ISO 354 "Measurement of sound absorption in a reverberation room ". Firstly, theoretical basis related to the test method have been studied. Then, this method has been defined and applied to a particular case with the instrumentation available in the Acoustics laboratory of the College. The test result must be accompanied by a statement of the uncertainty of the result. For this reason, Monte Carlo method and GUM uncertainty framework have been applied in this project for estimating uncertainty and comparing the results obtained by these two methodologies. In addition, a study was made in the reverberation room of CEIS, by ray tracing, to study the influence on the sound field produced by the introduction of an absorbent material inside of the room.