A tailored approach for the treatment of indirect inguinal hernia in adults--an old problem revisited.

A patent processus vaginalis peritonei (PPV) presents typically as an indirect hernia with an intact inguinal canal floor during childhood. Little is known however about PPV in adults and its best treatment. A cohort study included all consecutive patients admitted for ambulatory open hernia repair. In patients with a PPV, demographics, hernia characteristics, and outcome were prospectively assessed. Annulorrhaphy was the treatment of choice in patients with an internal inguinal ring diameter of < 30 mm. Between 1998 and 2006, 92 PPVs (two bilateral) were diagnosed in 676 open hernia repairs (incidence of 14%). Eighty nine of the 90 patients were males, the median age was 34 years (range: 17-85). A PPV was right-sided in 67% and partially obliterated in 66%. Forty-one patients had an annulorrhaphy and 51 patients had a tension-free mesh repair. The median operation time was significantly shorter in the annulorrhaphy group (38 vs. 48 min, P <.0001). In a median follow-up period of 56 months (27-128), both groups did not differ concerning recurrence (1/41 vs. 2/51), chronic pain (3/41 vs. 4/51), and hypoesthesia (5/41 vs. 9/51). There was however a clear trend to less neuropathic symptoms in favor of annulorrhaphy (0/41 vs. 5/51, P < 0.066). PPV occurs in 14% of adults undergoing hernia repair. In selected patients, annulorrhaphy takes less time and is associated with equally low recurrence but less potential for neuropathic symptoms.

Early tailored assertive community case management for hard-to-engage adolescents suffering from psychiatric disorders: an exploratory pilot study.

AIM: The study aims to evaluate the effects of assertive community treatment (ACT) on the mental health and overall functioning of adolescents suffering from severe psychiatric disorders and who refuse any traditional child psychiatric care. There are a few studies evaluating the effects of ACT on a population of adolescents with psychiatric disorders. This short report highlights the impact of an ACT programme tailored to the needs of these patients, not only as an alternative to hospitalization, but also as a new form of intervention for patients that are difficult to engage. METHODS: The effect of ACT on 35 adolescents using the Health of the Nation Outcome Scales for Children and Adolescents (HoNOSCA) as a measuring tool in pre- and post-intervention was evaluated. RESULTS: The results show that the intervention was associated with a significant improvement on the HoNOSCA overall score, with the following items showing significant amelioration: hyperactivity/focus problems, non-organic somatic symptoms, emotional symptoms, scholastic/language skills, peer relationships, family relationships and school attendance. CONCLUSION: ACT appears as a feasible intervention for hard-to-engage adolescents suffering from psychiatric disorders. The intervention seems to improve their mental health and functioning. This pilot study may serve as a basis to prepare a controlled study that will also take the costs of the intervention into account.

Random-field Potts model with dipolarlike interactions: Hysteresis avalanches and microstructure

A model for the study of hysteresis and avalanches in a first-order phase transition from a single variant phase to a multivariant phase is presented. The model is based on a modification of the random-field Potts model with metastable dynamics by adding a dipolar interaction term truncated at nearest neighbors. We focus our study on hysteresis loop properties, on the three-dimensional microstructure formation, and on avalanche statistics.

Accelerated Microstructure Imaging via Convex Optimization (AMICO) from diffusion MRI data.

Microstructure imaging from diffusion magnetic resonance (MR) data represents an invaluable tool to study non-invasively the morphology of tissues and to provide a biological insight into their microstructural organization. In recent years, a variety of biophysical models have been proposed to associate particular patterns observed in the measured signal with specific microstructural properties of the neuronal tissue, such as axon diameter and fiber density. Despite very appealing results showing that the estimated microstructure indices agree very well with histological examinations, existing techniques require computationally very expensive non-linear procedures to fit the models to the data which, in practice, demand the use of powerful computer clusters for large-scale applications. In this work, we present a general framework for Accelerated Microstructure Imaging via Convex Optimization (AMICO) and show how to re-formulate this class of techniques as convenient linear systems which, then, can be efficiently solved using very fast algorithms. We demonstrate this linearization of the fitting problem for two specific models, i.e. ActiveAx and NODDI, providing a very attractive alternative for parameter estimation in those techniques; however, the AMICO framework is general and flexible enough to work also for the wider space of microstructure imaging methods. Results demonstrate that AMICO represents an effective means to accelerate the fit of existing techniques drastically (up to four orders of magnitude faster) while preserving accuracy and precision in the estimated model parameters (correlation above 0.9). We believe that the availability of such ultrafast algorithms will help to accelerate the spread of microstructure imaging to larger cohorts of patients and to study a wider spectrum of neurological disorders.

Microstructure of highly oriented, hexagonal, boron nitride thin films grown on crystalline silicon by radio frequency plasma-assisted chemical vapor deposition

We present a high‐resolution electron microscopy study of the microstructure of boron nitride thin films grown on silicon (100) by radio‐frequency plasma‐assisted chemical vapor deposition using B2H6 (1% in H2) and NH3 gases. Well‐adhered boron nitride films grown on the grounded electrode show a highly oriented hexagonal structure with the c‐axis parallel to the substrate surface throughout the film, without any interfacial amorphous layer. We ascribed this textured growth to an etching effect of atomic hydrogen present in the gas discharge. In contrast, films grown on the powered electrode, with compressive stress induced by ion bombardment, show a multilayered structure as observed by other authors, composed of an amorphous layer, a hexagonal layer with the c‐axis parallel to the substrate surface and another layer oriented at random

Effects of strontium ranelate and alendronate on bone microstructure in women with osteoporosis. Results of a 2-year study.

A Strontium ranelate appears to influence more than alendronate distal tibia bone microstructure as assessed by high-resolution peripheral quantitative computed tomography (HR-pQCT), and biomechanically relevant parameters as assessed by micro-finite element analysis (mu FEA), over 2 years, in postmenopausal osteoporotic women.Introduction Bone microstructure changes are a target in osteoporosis treatment to increase bone strength and reduce fracture risk.Methods Using HR-pQCT, we investigated the effects on distal tibia and radius microstructure of strontium ranelate (SrRan; 2 g/day) or alendronate (70 mg/week) for 2 years in postmenopausal osteoporotic women. This exploratory randomized, double-blind trial evaluated HR-pQCT and FEA parameters, areal bone mineral density (BMD), and bone turnover markers.Results In the intention-to-treat population (n = 83, age: 64 +/- 8 years; lumbar T-score: -2.8 +/- 0.8 [DXA]), distal tibia Cortical Thickness (CTh) and Density (DCort), and cancellous BV/TV increased by 6.3%, 1.4%, and 2.5%, respectively (all P < 0.005), with SrRan, but not with alendronate (0.9%, 0.4%, and 0.8%, NS) (P < 0.05 for all above between-group differences). Difference for CTh evaluated with a distance transformation method was close to significance (P = 0.06). The estimated failure load increased with SrRan (+2.1%, P < 0.005), not with alendronate (-0.6%, NS) (between-group difference, P < 0.01). Cortical stress was lower with SrRan (P < 0.05); both treatments decreased trabecular stress. At distal radius, there was no between-group difference other than DCort (P < 0.05). Bone turnover markers decreased with alendronate; bALP increased (+21%) and serum-CTX-I decreased (-1%) after 2 years of SrRan (between-group difference at each time point for both markers, P < 0.0001). Both treatments were well tolerated.Conclusions Within the constraints of HR-pQCT method, and while a possible artefactual contribution of strontium cannot be quantified, SrRan appeared to influence distal tibia bone microstructure and FEA-determined biomechanical parameters more than alendronate. However, the magnitude of the differences is unclear and requires confirmation with another method.

Solid phase crystallization under continuous heating: kinetic and microstructure scaling laws

The kinetics and microstructure of solid-phase crystallization under continuous heating conditions and random distribution of nuclei are analyzed. An Arrhenius temperature dependence is assumed for both nucleation and growth rates. Under these circumstances, the system has a scaling law such that the behavior of the scaled system is independent of the heating rate. Hence, the kinetics and microstructure obtained at different heating rates differ only in time and length scaling factors. Concerning the kinetics, it is shown that the extended volume evolves with time according to αex = [exp(κCt′)]m+1, where t′ is the dimensionless time. This scaled solution not only represents a significant simplification of the system description, it also provides new tools for its analysis. For instance, it has been possible to find an analytical dependence of the final average grain size on kinetic parameters. Concerning the microstructure, the existence of a length scaling factor has allowed the grain-size distribution to be numerically calculated as a function of the kinetic parameters

Tailored thoracomyoplasty as a valid treatment option for chronic postlobectomy empyema.

BACKGROUND: Chronic post-lobectomy empyema is rare but may require space obliteration for infection control. We report our experience by using a tailored thoracomyoplasty for this specific indication with respect to infection control and functional outcome. METHODS: We retrospectively analyzed 17 patients (11 men, 6 women) with chronic postlobectomy empyema who were treated by thoracomyoplasty in our institution between 2000 and 2011. All patients underwent an initial treatment attempt by use of chest tube drainage and antibiotics except those with suspicion of pleural aspergillosis (n = 6). In 5 patients, bronchus stump insufficiency was identified at preoperative bronchoscopy. A tailored thoracoplasty was combined with a serratus anterior-rhomboid myoplasty, which also served to close a bronchopleural fistula, if present. The first rib was resected in 11 of 17 patients. RESULTS: The 90-day mortality was 11.7%. Thoracomyoplasty was successful in all surviving patients with respect to infection control, space obliteration, and definitive closure of bronchopleural fistula, irrespective of the type of infection, the presence of a bronchopleural fistula, or whether a first rib resection was performed. Postlobectomy pulmonary function testing before and after thoracoplasty revealed a mean predicted FEV(1) of 63.0% ± 8.5% and 51.5% ± 4.2% (p = 0.01) and a mean predicted DLCO of 59.8% ± 11.6% and 54.5% ± 12.5%, respectively. Postoperative shoulder girdle dysfunction and scoliosis were prevented in patients willing to undergo intense physiotherapy. CONCLUSIONS: Tailored thoracomyoplasty represents a valid option for patients with chronic postlobectomy empyema without requiring a preceding open window thoracostomy. Space obliteration and infection control were equally obtained with and without first rib resection.

Microstructure and magnetic properties of Ni50 Mn37 Sn13 Heusler alloy ribbons

The Heusler alloy Ni50 Mn37 Sn13 was successfully produced as ribbon flakes of thickness around 7-10 μm melt spinning. Fracture cross section micrographs in the ribbon show the formation of a microcrystalline columnarlike microstructure, with their longer axes perpendicular to the ribbon plane. Phase transition temperatures of the martensite-austenite transformation were found to be MS =218 K, Mf =207 K, AS =224 K, and Af =232 K; the thermal hysteresis of the transformation is 15 K. Ferromagnetic L 21 bcc austenite phase shows a Curie point of 313 K, with cell parameter a=0.5971 (5) nm at 298 K, transforming into a modulated 7M orthorhombic martensite with a=0.6121 (7) nm, b=0.6058 (8) nm, and c=0.5660 (2) nm, at 150 K

Widespread age-related differences in the human brain microstructure revealed by quantitative magnetic resonance imaging.

A pressing need exists to disentangle age-related changes from pathologic neurodegeneration. This study aims to characterize the spatial pattern and age-related differences of biologically relevant measures in vivo over the course of normal aging. Quantitative multiparameter maps that provide neuroimaging biomarkers for myelination and iron levels, parameters sensitive to aging, were acquired from 138 healthy volunteers (age range: 19-75 years). Whole-brain voxel-wise analysis revealed a global pattern of age-related degeneration. Significant demyelination occurred principally in the white matter. The observed age-related differences in myelination were anatomically specific. In line with invasive histologic reports, higher age-related differences were seen in the genu of the corpus callosum than the splenium. Iron levels were significantly increased in the basal ganglia, red nucleus, and extensive cortical regions but decreased along the superior occipitofrontal fascicle and optic radiation. This whole-brain pattern of age-associated microstructural differences in the asymptomatic population provides insight into the neurobiology of aging. The results help build a quantitative baseline from which to examine and draw a dividing line between healthy aging and pathologic neurodegeneration.

Modelling of iron-filled magneto-active polymers with a dispersed chain-like microstructure

Magneto-active polymers are a class of smart materials commonly manufactured by mixing micron-sized iron particles in a rubber-like matrix. When cured in the presence of an externally applied magnetic field, the iron particles arrange themselves into chain-like structures that lend an overall anisotropy to the material. It has been observed through electron micrographs and X-ray tomographs that these chains are not always perfect in structure, and may have dispersion due to the conditions present during manufacturing or some undesirable material properties. We model the response of these materials to coupled magneto-mechanical loading in this paper using a probability based structure tensor that accounts for this imperfect anisotropy. The response of the matrix material is decoupled from the chain phase, though still being connected through kinematic constraints. The latter is based on the definition of a 'chain deformation gradient' and a 'chain magnetic field'. We conclude with numerical examples that demonstrate the effect of chain dispersion on the response of the material to magnetoelastic loading.

Effects of gluten and transglutaminase on microstructure, sensory characteristics and instrumental texture of oat bread

Selostus: Taikinaan lisättyjen gluteenin ja transglutaminaasin vaikutus kauraleivän rakenteeseen

Relating microstructure, sensory and instrumental texture of processed oat

Selostus: Prosessoidun kauran mikroskooppinen ja aistittava rakenne