High-velocity features: A ubiquitous property of Type Ia supernovae

Evidence of high-velocity features (HVFs) such as those seen in the near-maximum spectra of some Type Ia supernovae (SNe Ia; e. g., SN 2000cx) has been searched for in the available SN Ia spectra observed earlier than 1 week before B maximum. Recent observational efforts have doubled the number of SNe Ia with very early spectra. Remarkably, all SNe Ia with early data ( seven in our Research Training Network sample and 10 from other programs) show signs of such features, to a greater or lesser degree, in Ca II IR and some also in the Si II lambda 6355 line. HVFs may be interpreted as abundance or density enhancements. Abundance enhancements would imply an outer region dominated by Si and Ca. Density enhancements may result from the sweeping up of circumstellar material (CSM) by the highest velocity SN ejecta. In this scenario, the high incidence of HVFs suggests that a thick disk and/or a high-density companion wind surrounds the exploding white dwarf, as may be the case in single degenerate systems. Large-scale angular fluctuations in the radial density and abundance distribution may also be responsible: this could originate in the explosion and would suggest a deflagration as the more likely explosion mechanism. CSM interaction and surface fluctuations may coexist, possibly leaving different signatures on the spectrum. In some SNe, the HVFs are narrowly confined in velocity, suggesting the ejection of blobs of burned material.

Rapid design of a single chip adaptive beamformer

This paper presents the design of a single chip adaptive beamformer which contains 5 million transistors and can perform 50 GigaFlops. The core processor of the adaptive beamformer is a QR-array processor implemented on a fully efficient linear systolic architecture. The paper highlights a number of rapid design techniques that have been used to realize the design. These include an architecture synthesis tool for quickly developing the circuit architecture and the utilization of a library of parameterizable silicon intellectual property (IP) cores, to rapidly develop the circuit layouts.

Single-Plateaued Choice

Single-plateaued preferences generalize single-peaked preferences by allowing for multiple best elements. These preferences have played an important role in areas such as voting, strategy-proofness and matching problems. We examine the notion of singleplateauedness in a choice-theoretic setting. Single-plateaued choice is characterized by means of a collinear interval continuity property in the presence of independence of irrelevant alternatives. Further results establish that our notion of single-plateauedness conforms to the motivation underlying the term and we analyze the consequences of alternative continuity properties. The importance of basic assumptions such as closedness and convexity is discussed. Journal of Economic Literature Classification Nos.: D11, D71.

Single-plateaued choice

Single-plateaued preferences generalize single-peaked preferences by allowing for multiple best elements. These preferences have played an important role in areas such as voting, strategy-proofness and matching problems. We examine the notion of single-plateauedness in a choice-theoretic setting. Single-plateaued choice is characterized by means of a collinear interval continuity property in the presence of independence of irrelevant alternatives. Further results establish that our notion of single-plateauedness conforms to the motivation underlying the term and we analyze the consequences of alternative continuity properties. The importance of basic assumptions such as closedness and convexity is discussed. Journal of Economic Literature Classification Nos.: D11, D71.

Intellectual Property Protection For Plant Derived Vaccine Technology: Here They Come Are We Ready or Not ?

Il existe une nouvelle catégorie de technologie, les vaccins dérivés de plantes («VDPs»), qui englobe des produits qui ont un grand potentiel pour l’amélioration de la santé à l’échelle globale. Bien qu’ils ne soient pas encore disponibles pour le public, le développement des VDPs a progressé de façon telle qu’ils devraient être prêts à être mis en marché et distribués sous peu. Ainsi, c’est le moment idéal pour lancer un débat sur la meilleure façon de protéger cette nouvelle catégorie de technologie. Vu leur nature, les VDPs ne se qualifient pas parfaitement pour aucune forme de protection de propriété intellectuelle. En effet, un VDP est à la fois une variété de plante, une biotechnologie, un médicament et un produit qui vise spécifiquement les besoins de pays en voie de développement. Chacune de ces caractéristiques soulève ses propres problématiques en ce qui a trait à la propriété intellectuelle. C’est pourquoi il appert difficile d’identifier la forme de protection la plus adéquate et appropriée pour les VDPs. Cet article traite de la nature d’un VDP, des différentes catégories dans lesquelles il pourrait être classé, des différents types de systèmes de protection de propriété intellectuelle auxquels il pourrait être éligible ainsi que des problèmes qui pourraient être soulevés par tous ces éléments. Ces discussions visent à mettre l’accent sur le fait que nous avons affaire à une toute nouvelle catégorie d’innovation technologique. L’auteure est donc d’avis qu’une approche proactive est nécessaire pour discuter d’un système de protection de propriété intellectuelle en relation avec les VDPs. En ce moment, c’est l’inventeur qui choisi comment il protègera son invention. Les moyens employés par ce dernier pourraient être subséquemment modifiés ou annulés par une décision judiciaire mais comme plusieurs autres inventeurs d’une même catégorie de technologie auront probablement déjà adopté une stratégie de protection similaire, ce type de mesures judiciaire, très tard dans le processus, pourra avoir des résultats néfastes sur les détenteurs de droits. Le développement de lignes directrices d’entrée de jeu, avec l’aide d’un panel d’experts de préférence, peut contribuer à éviter les situations de confusion qui ont déjà été vécues avec l’application d’autres nouvelles technologies et qui devraient servir de leçon pour l’encadrement des VDPs.

Marine Actinomycetes as Source of Antimicrobial Compounds and as Probiotics and Single Cell Protein for Application in Penaeid Prawn Culture Systems

This thesis Entitled Marine actinomycetes as source of antimicrobial compounds and as probiotics and single cell protein for application in penaeid peawn culture systems. Ocean harbours more than 80% of all life on earth and remains our greatest untapped natural resource. The study revealed the potential of marine actinomycetes as a source of antimicrobial compounds. The selected streptomycetes were found to be capable of inhibiting most of the pathogenic vibrios, whichis a major problem both in hatcheries and grow out systems. The bioactive principle can be incorporated with commercial feeds and applied as medicated diet for the control of vibrios in culture systems.The hydrolytic potential inhibitory property against pathogens and non—pathogenicity to penaeid prawns make the selected Streptomycesspp.an effective probioic in aquaculture. Since there is considerably less inhibition to the natural in pond ecosystem the microbial diversityis being maintained and thereby the water quality. Actinomycetes was found to be a good source of single cell protein as an ingredient inaquaculture feed formulations. Large amount of mycelial waste (actinomycete biomassO is produced from antibiotic industries and this nutrient rich waste can be effectively used as a protein source in aquaculture feeds.This study reveals the importance of marine actinomycetes as a source of antimicrobial compounds and as a probiotic and single cell protein for aquaculture applications.

Synthesis, crystal structure, magnetic behavior and thermal property of three polynuclear complexes: [M(dca)(2)(H2O)2](n)center dot(hmt)(n) [M = Mn(II), Co(II)] and [Co(dca)(2)(bpds)](n) [dca, dicyanamide; hint, hexamethylenetetramine; bpds, 4,4 '-bipyridyl disulfide]

Three mu(1.5)-dicyanamide bridged Mn(II) and Co(II) complexes having molecular formula [Mn(dca)(2)(H2O)(2)](n)center dot(hmt)(n) (1), [Co(dca)(2) (H2O)(2)](n)center dot(hmt)(n) (2) and [Co(dca)(2)(bpds)](n) (3) [dca = dicyanamide; hmt = hexamethylenetetramine; bpds = 4,4'-bipyridyl disulfide] have been synthesized and characterized by single crystal X-ray diffraction study, low temperature (300-2 K) magnetic measurement and thermal behavior. The X-ray diffraction analysis of 1 and 2 reveals that they are isostructural, comprising of 1D coordination polymers [M(dca)(2)(H2O)(2)](n) [M = Mn(II), Co(II) for 1 and 2. respectively] with uncoordinated hmt molecules located among the chains. The [M(dca)(2)(H2O)(2)](n) chains and the lattice hint molecules are connected through H-bonds resulting in a 3D supramolecular architecture. The octahedral N4O2 chromophore surrounding the metal ion forms via two trans located water oxygens and four nitrogens from four nitrile dca. Complex 3 is a 1D chain formed by two mu(1.5)-dca and one bridging bpds. The octahedral N-6 coordination sphere surrounding the cobalt ions comprises four nitrogens from dca and two from bpds. Low temperature magnetic study indicates small antiferromagnetic coupling for all the complexes. Best fit parameters for 1: J = -0.17 cm(-1), g = -2.03 with R = 6.1 x 10(-4), for 2, J = -0.50 cm(-1), and for 3, J = -0.95 cm(-1). (c) 2005 Elsevier B.V. All rights reserved.

Sources of alpha and beta in property funds

This paper examines issues related to potential analytical performance systems for global property funds. These will include traditional attribution methods but will also cover the performance concepts of alpha and beta widely used in other asset classes. We look at issues including...what creates beta, and what drives alpha in real estate investment? How can it be measured and isolated? How do these concepts relate to traditional attribution systems? Can performance records and performance fees adequately distinguish between these drivers? In this paper we illustrate these issues by reference to a case study addressing the complete performance record of a single unlisted fund.

Risk reduction and diversification in UK commercial property portfolios

The issue of diversification in direct real estate investment portfolios has been widely studied in academic and practitioner literature. Most work, however, has been done using either partially aggregated data or data for small samples of individual properties. This paper reports results from tests of both risk reduction and diversification that use the records of 10,000+ UK properties tracked by Investment Property Databank. It provides, for the first time, robust estimates of the diversification gains attainable given the returns, risks and cross‐correlations across the individual properties available to fund managers. The results quantify the number of assets and amount of money needed to construct both ‘balanced’ and ‘specialist’ property portfolios by direct investment. Target numbers will vary according to the objectives of investors and the degree to which tracking error is tolerated. The top‐level results are consistent with previous work, showing that a large measure of risk reduction can be achieved with portfolios of 30–50 properties, but full diversification of specific risk can only be achieved in very large portfolios. However, the paper extends previous work by demonstrating on a single, large dataset the implications of different methods of calculating risk reduction, and also by showing more disaggregated results relevant to the construction of specialist, sector‐focussed funds.

Insertion of a hydroxido bridge into a diphenoxido dinuclear copper(II) complex: drastic change of the magnetic property from strong antiferromagnetic to ferromagnetic and enhancement in the catecholase activity

A diphenoxido-bridged dinuclear copper(II) complex, [Cu2L2(ClO4)(2)] (1), has been synthesized using a tridentate reduced Schiff base ligand, 2-[[2-(diethylamino)-ethylamino]methyl]phenol (HL). The addition of triethylamine to the methanolic solution of this complex produced a novel triple bridged (double phenoxido and single hydroxido) dinuclear copper(II) complex, [Cu2L2(OH)]ClO4 (2). Both complexes 1 and 2 were characterized by X-ray structural analyses, variable-temperature magnetic susceptibility measurements, and spectroscopic methods. In 1, the two phenoxido bridges are equatorial-equatorial and the species shows strong antiferromagnetic coupling with J = -615.6(6.1) cm(-1). The inclusion of the equatorial-equatorial hydroxido bridge in 2 changes the Cu center dot center dot center dot Cu distance from 3.018 angstrom (avg.) to 2.798 angstrom (avg.), the positions of the phenoxido bridges to axial-equatorial, and the magnetic coupling to ferromagnetic with J = 50.1(1.4) cm(-1). Using 3,5-di-tert-butylcatechol as the substrate, the catecholase activity of the complexes has been studied in a methanol solution; compound 2 shows higher catecholase activity (k(cat) = 233.4 h(-1)) than compound 1 (k(cat) = 93.6 h(-1)). Both complexes generate identical species in solution, and they are interconvertible simply by changing the pH of their solutions. The higher catecholase activity of 2 seems to be due to the presence of the OH group, which increases the pH of its solution.

In vitro and in vivo evaluation of a primaquine prodrug without red blood cell membrane destabilization property

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Property rights and the rural land market in Latin America

Includes bibliography

Single nucleotide polymorphisms in candidate genes associated with gastrointestinal nematode infection in goats

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

13C NMR of a single molecule magnet: analysis of pseudocontact shifts and residual dipolar couplings

Paramagnetic triple decker complexes of lanthanides are promising Single Molecule Magnets (SMMs), with many potential uses. Some of them show preferable relaxation behavior, which enables the recording of well resolved NMR spectra. These axially symmetric complexes are also strongly magnetically anisotropic, and this property can be described with the axial component of the magnetic susceptibility tensor, χa. For triple decker complexes with phthalocyanine based ligands, the Fermi˗contact contribution is small. Hence, together with the axial symmetry, the experimental chemical shifts in 1H and 13C NMR spectra can be modeled easily by considering pseudocontact and orbital shifts alone. This results in the determination of the χa value, which is also responsible for molecular alignment and consequently for the observation of residual dipolar couplings (RDCs). A detailed analysis of the experimental 1H-13C and 1H-1H couplings revealed that contributions from RDCs (positive and negative) and from dynamic frequency shifts (negative for all observed couplings) have to be considered. Whilst the pseudocontact shifts depend on the average positions of 1H and 13C nuclei relative to the lanthanide ions, the RDCs are related to the mobility of nuclei they correspond to. This phenomenon allows for the measurement of the internal mobility of the various groups in the SMMs.

Structure property relations in complex copolymer systems

A thorough investigation was made of the structure-property relation of well-defined statistical, gradient and block copolymers of various compositions. Among the copolymers studied were those which were synthesized using isobornyl acrylate (IBA) and n-butyl acrylate (nBA) monomer units. The copolymers exhibited several unique properties that make them suitable materials for a range of applications. The thermomechanical properties of these new materials were compared to acrylate homopolymers. By the proper choice of the IBA/nBA monomer ratio, it was possible to tune the glass transition temperature of the statistical P(IBA-co-nBA) copolymers. The measured Tg’s of the copolymers with different IBA/nBA monomer ratios followed a trend that fitted well with the Fox equation prediction. While statistical copolymers showed a single glass transition (Tg between -50 and 90 ºC depending on composition), DSC block copolymers showed two Tg’s and the gradient copolymer showed a single, but very broad, glass transition. PMBL-PBA-PMBL triblock copolymers of different composition ratios were also studied and revealed a microphase separated morphology of mostly cylindrical PMBL domains hexagonally arranged in the PBA matrix. DMA studies confirmed the phase separated morphology of the copolymers. Tensile studies showed the linear PMBL-PBA-PMBL triblock copolymers having a relatively low elongation at break that was increased by replacing the PMBL hard blocks with the less brittle random PMBL-r-PMMA blocks. The 10- and 20-arm PBA-PMBL copolymers which were studied revealed even more unique properties. SAXS results showed a mixture of cylindrical PMBL domains hexagonally arranged in the PBA matrix, as well as lamellar. Despite PMBL’s brittleness, the triblock and multi-arm PBA-PMBL copolymers could become suitable materials for high temperature applications due to PMBL’s high glass transition temperature and high thermal stability. The structure-property relation of multi-arm star PBA-PMMA block copolymers was also investigated. Small-angle X-ray scattering revealed a phase separated morphology of cylindrical PMMA domains hexagonally arranged in the PBA matrix. DMA studies found that these materials possess typical elastomeric behavior in a broad range of service temperatures up to at least 250°C. The ultimate tensile strength and the elastic modulus of the 10- and 20-arm star PBA-PMMA block copolymers are significantly higher than those of their 3-arm or linear ABA type counterparts with similar composition, indicating a strong effect of the number of arms on the tensile properties. Siloxane-based copolymers were also studied and one of the main objectives here was to examine the possibility to synthesize trifluoropropyl-containing siloxane copolymers of gradient distribution of trifluoropropyl groups along the chain. DMA results of the PDMS-PMTFPS siloxane copolymers synthesized via simultaneous copolymerization showed that due to the large difference in reactivity rates of 2,4,6-tris(3,3,3-trifluoropropyl)-2,4,6-trimethylcyclotrisiloxane (F) and hexamethylcyclotrisiloxane (D), a copolymer of almost block structure containing only a narrow intermediate fragment with gradient distribution of the component units was obtained. A more dispersed distribution of the trifluoropropyl groups was obtained by the semi-batch copolymerization process, as the DMA results revealed more ‘‘pure gradient type’’ features for the siloxane copolymers which were synthesized by adding F at a controlled rate to the polymerization of the less reactive D. As with trifluoropropyl-containing siloxane copolymers, vinyl-containing polysiloxanes may be converted to a variety of useful polysiloxane materials by chemical modification. But much like the trifluoropropyl-containing siloxane copolymers, as a result of so much difference in the reactivities between the component units 2,4,6-trivinyl-2,4,6-trimethylcyclotrisiloxane (V) and hexamethylcyclotrisiloxane (D), thermal and mechanical properties of the PDMS-PMVS copolymers obtained by simultaneous copolymerization was similar to those of block copolymers. Only the copolymers obtained by semi-batch method showed properties typical for gradient copolymers.