Effects of Initial Body Condition, Frame Size and Concentration of Dietary Energy on Performance of Finishing Steers

Steers were sorted into four groups based on hip height and fat cover at the start of the finishing period. Each group of sorted steers was fed a diet containing 0.59 or 0.64 Mcal NEg per pound of diet. Steers with less initial fat cover (.08 in.) gained slightly faster, consumed less feed, and therefore tended to be more efficient than steers with greater finish (.16 in.). Steers fed the lower-energy diet consumed more feed, gained similarly, and were less efficient than steers fed the higher-energy diet. The NRC computer model to evaluate beef cattle diets underpredicted performance of cattle in this experiment, but accurately predicted the differences in gain and feed efficiency observed between the leaner and fatter steers and between the two diets. In this study, the shorter steers (49.4 vs 52.2 in. initial height at the hip) gained faster with slightly greater feed intake and the same feed conversion.

Effect of Optimum® High Oil Corn on Performance and Carcass Characteristics of Finishing Yearling Steers

Steers fed Optimum® high oil corn had statistically similar live performance as steers fed isogenetic control corn or the control corn + fat. Numerically steers fed high oil corn gained 3% faster during the 107-day study with similar feed conversion. During the first half of the experiment, steers fed high oil corn did not perform as well as those fed control corn. During the second half of the experiment, steers fed high oil corn gained 21% faster and were 17% more efficient. There were no effects of feeding high oil corn on carcass characteristics, except there were more Choice carcasses from the steers fed high oil corn as compared with control corn (57% vs. 43% Choice).

Value of High-Oil Corn Grain for Finishing Steers

Rolled high-oil corn in comparison with rolled isogenetic control corn was fed to finishing steers as 33%, 66% and 100% of the corn grain in their diet in a 134-day feeding trial. During the first 75 days of the trial, steers fed highoil corn had numerically lower rates of gain and tended to have poorer feed conversions compared with the control corn. At the end of the trial, there were not statistically significant differences in performance or carcass measurements of the steers fed the different amounts of high-oil or control corns. The results of this study indicated that the steers did not respond to the higher energy content of high-oil corn.

The Effects of High-Oil Corn or Typical Corn with or without Supplemental Fat on Diet Digestibility in Finishing Steers

Two 3 x 3 latin squares were utilized in an 84-day digestion trial with ruminally- and duodenallycannulated steers. Diets consisted of 73 to 78% whole corn grain, 12.3% corn silage and 2.0% N, with treatment differences being high-oil corn- (HOC), isogenetic typical-corn- (TC), or isogenetic typical-corn + fat- (TC+F) based diets. The HOC and TC+F diets were formulated to provide the same ether extract (EE) content. All diets were fed at 90% of ad libitum intake. Chromic oxide was used as a digestibility marker. Total tract dry matter (DM) (P=.08), organic matter (OM) (P=.08) and nitrogen (N) (P=.06) digestibilities tended to be greater for TC than HOC diets, whereas starch neutral detergent fiber (NDF), acid detergent fiber (ADF), and ether extract digestibilities were similar (P>.10). There were no differences (P>.10) in total tract dry matter, organic matter, starch, NDF, ADF, ether extract, or nitrogen digestibilities between TC+F and HOC diets or TC and TC+F diets. Ruminal digestion of dry matter, organic matter, starch, NDF, ADF, and feed nitrogen was similar (P>.10) among treatments. Microbial-nitrogen flow and efficiencies were also similar (P>.10) among treatments. Results indicate finishing steer diets composed of primarily HOC are equally or less digestible than similar diets composed of TC, and adding fat to TC diets did not affect the digestibility of the diet when fed to finishing steers.

Responses to Adding Fat to Corn-Based Diets Supplemented with Urea and Soybean Meal for Finishing Steers

Yearling steers were fed corn-based diets supplemented with urea or soybean meal plus urea, and none, 2%, or 4% fat. All steers were implanted with Revalorâ-S and fed for 118 days. Adding fat did not improve performance of the steers in the feedlot or improve carcass characteristics. Feeding soybean meal increased rate of gain, improved feed efficiency, increased carcass weight, and tended to improve carcass quality grades compared with feeding urea. Adding 4% fat decreased feed intake, suggesting that corn-based diets may contain enough oil to approach the quantity of fat that can be utilized effectively in a ruminant diet.

Effects of Feeding Cobalt Dextro Lac (CDL) on Feedlot Performance and Carcass Value of Finishing Steers Fed Wet Corn Gluten Feed

A 192-day experiment involving 144 young Angus steers fed growing and finishing diets containing 20% corn gluten feed was conducted to evaluate feeding a soluble source of readily available cobalt. No benefits were observed in rate of gain, feed intake or carcass value by feeding the available source of cobalt.

The Effects of Feeding a Live Microbial Product on Feedlot Performance and Carcass Value of Finishing Steers Fed Wet Corn Gluten Feed

This experiment was conducted to evaluate the efficacy of daily feeding a live microbial preparation containing two live organisms to finishing cattle. One organism was a lactobacillus, and the other was a propionibacterium, thought to work in concert to improve fermentation in the rumen and overall digestion. The study was conducted with Angus steers with an average initial weight of 550 lbs that were fed a finishing ration containing 50% wet corn gluten feed on a dry basis for 184 days. Feeding the microbial product improved daily gain and feed efficiency 1.7% and 2.4%, respectively, but the differences were not statistically significant. The microbial preparation increased carcass weights 1% but had no effects on quality or yield grades. It is concluded that potential benefits of this product are more likely to be greater when cattle are fed high grain rations rather than diets containing high concentrations of corn gluten feed.

Programmed Feeding of Protein to Finishing Beef Steers

Six-hundred pound Angus steer calves were fed cornbased finishing diets for 180 days to determine the effects of stepwise reduction of protein in the diet on performance and carcass characteristics. Reducing protein in the diet, but satisfying the requirements projected by the National Research Council model for Nutrient Requirements of Beef Cattle, did not affect performance or carcass measurements. Further reduction in protein content of the diet, so the projected requirement of the rumen microorganisms was not being met, did not affect performance or carcass measurements. It is concluded that quantity of protein fed to finishing cattle can be programmed and abstantially reduced. These reductions will result in substantially less nitrogen excreted in manure from larger feedlots.

Evaluation of Proteferm® as a Nitrogen Supplement for Finishing Steers

Proteferm is a liquid by-product from the production of monosodium glutamate by fermentation that is 40% solids and contains 95% crude protein on a dry basis. Two trials were conducted with yearling steers to study the effects of different levels of Proteferm when added to 90% concentrate diets to replace corn and urea. Feeding Proteferm resulted in a decrease in urine pH, suggesting a metabolic acidosis that was probably caused by a negative cation–anion balance. Correcting the cation–anion imbalance resulted in an increase in feed intake and the performance of steers fed Proteferm as 1.5% of diet dry matter to be similar to the performance of control steers. Addition of sodium bicarbonate to the control diet or to the diet containing 1.5% Proteferm to produce a positive cation–anion balance did not improve performance. The results of these trials indicate that 1.5% Proteferm is the maximum that should be added to high concentrate diets fed to beef cattle without affecting performance or carcass value.

Use of Ultrasound Backfat Estimates to Form Marketing Groups Prior to Finishing for Feedlot Steers

An experiment was conducted using 95 Continental crossbred steers. The cattle were sorted by ultrasound 160 days before slaughter into a low backfat group (Low BF) and a higher backfat group (High BF). Half of the Low BF and half of the High BF were implanted whereas the other halves were not. Data from the experiment were used in two hypothetical markets. One market was a high yield beef program (HY) that did not allow the use of implants. The second market was a commodity beef program (CM) that allowed the use of implants. The cattle were priced as an unsorted group (ALL) and two sorted groups (Low BF and High BF) within the HY (non-implanted) and CM (implanted) markets. The CM program had a base price of $1.05/lb hot carcass weight (HCW) with a $0.15/lb HCW discount for quality grade (QG) Select and a $0.20/lb HCW discount for yield grade (YG) 4. The HY program used a base price of $1.07/lb HCW with premiums ($/lb HCW) paid for YG £ .9 (.15), 1.0 - 1.4 (.10), and 1.5 - 1.9 (.03). The carcasses were discounted ($/lb HCW) for YG 2.5 - 2.9 (.03), 3.0 - 3.9 (.15), and ³ 4.0 (.35). This data set provides good evidence that the end point at which to sell a group of cattle depends on the particular market. Sorting had an economic advantage over ALL in the HY Low BF and the CM High BF groups. The HY High BF cattle should have been sold sooner due to the discounts recieved for increased YG. The increased YG was directly affected by an increase in BF. Furthermore, the CM Low BF group should have been fed longer to increase the number of carcasses grading Choice.

Intensive Rotational Grazing of Steers on Highly Erodible Land at the Adams County CRP Project

Grazing yearling steers is one way to utilize the forages required for participation in the Conservation Reserve Program (CRP) after CRP contracts expire. In 1995, a stocker-steer intensive-rotational grazing study was conducted at the CRP Research and Demonstration Project near Corning, Iowa. A similar study was carried out in 1994. Seventy-five yearling crossbred steers grazed a 65- acre pasture that had been divided into 27 paddocks using electric fencing from May 4, 1995 to September 14, 1995. During this period, the 65-acre pasture system produced 9,975 animal-days of grazing and 11,403 pounds of gain. On a per-acre basis, this translates to 153.5 animal-days of grazing and 175.4 pounds of gain. The stocking rate was constant for the entire 133- day grazing season at 1.15 steers per acre. On May 4, 1995, the beginning of the grazing season, the average weight of the steers was 495.7 pounds. By the end of the grazing trial on September 14, 1995, the average weight of the steers had increased to 647.7 pounds. The average gain per steer during the 133-day grazing period was 152 pounds, and the average daily gain per steer was 1.14 pounds. The average bodyweight of the steers during the entire grazing season was 571.7 pounds.

Intensive Rotational Grazing of Steers on Highly Erodible Land at the Adams County CRP Project, 2001

A steer grazing demonstration was conducted in 2001 at the CRP Research and Demonstration Project farm near Corning, Iowa. Ninety-five steers were delivered to the Adams County CRP farm on April 27, 2001. The steer pasture at the CRP farm was 76 acres, divided into 33 paddocks with electric fence. Cattle were moved 101 times to a fresh paddock during the grazing season. Most of the moves (79.2%) followed 1 day of grazing in a paddock. No paddock was grazed for more than 3 days in succession. Rate of gain on pasture (2.12 lbs./animal/day) was higher in 2001 than in any previous year in the 8-year steer grazing project at the CRP farm. The 95 steers gained a total of 21,056 pounds on pasture, and the cost of the gain on pasture was $51.30/cwt. The 2001 steer grazing project showed a small profit above all costs. The net profit was $4.12/steer or $5.15/acre. Large profits and large losses are possible, primarily depending on the difference between the buying and selling prices.

Growth Response and Carcass Characteristics of Yearling Steers Subjected to Differing Implant Strategies

A 106-day demonstration utilizing yearling steers to measure feedlot performance and carcass response to implant strategies was conducted at the ISU Allee Demonstration Farm. Treatments were: 100 mg progesterone + 10 mg estradiol benzoate (ComponentÒ EC) on day 0 followed by 120 mg trenbolone acetate + 24 mg estradiol (ComponentÒ TES) implant 57 days later, or 120 mg trenbolone acetate + 24 mg estradiol (ComponentÒ TES) only on day 0. The control group received no implant. The steers were weighed every 28 days and ultrasound data were collected from demonstration initiation until slaughter. The cattle were marketed as one group on d 106 of the demonstration. Implanted cattle had higher average daily gains, heavier carcass weights, larger rib eye areas, and tended to have improved feed efficiency over control steers. Additionally, the reimplanted steers had higher marbling scores than controls, but no differences existed between once and twice-implanted steers.

Encore® Implant Use in Feedlot Steers

A feedlot demonstration utilizing Encore®, a new longterm implant product, was completed at the Allee Demonstration Farm at Newell, Iowa in 1999. Seventyone steers (697 lbs.) were allotted by weight and hide color and assigned to one of three treatments: 1) Encore® (43.9 mg estradiol = E) on day 0; 2) Encore® plus Component® TS (140 mg trenbolone acetate = ETS0) on day 0; or 3) Encore® on day 0 followed by Component® TS (ETS100) on day 100. Due to wide standard deviation in the weight of steers at the beginning of the demonstration, cattle were harvested in two groups. Approximately half of each treatment group was sorted by visual appraisal as to market readiness. Statistical interactions existed within treatment group between first and second harvest dates, therefore data were split and analyzed accordingly. In the first harvest group, ETS0 steers had higher marbling scores than ETS100 steers, and lower average daily gain than E steers and ETS100 steers. In the second harvest group, ETS0 steers had more fat at the 12th/13 rib than ETS100 steers, but did not differ from E steers. Marbling scores were also higher for ETS0 steers than either ETS100 or E steers in the second harvest group. Pooled data reveal that ETS0 steers had higher marbling scores than ETS100 steers and tended to have higher marbling scores than E steers. First harvest E and ETS100 steers had greater average daily gain than ETS0 steers. In the second harvest group, ETS0 steers had heavier final ending weights than E steers but did not differ from ETS100 steers. Final ending weights, rib eye area, fat thickness at the 12th/13th rib, KPH fat, and calculated yield grades did not differ among treatment groups in the pooled data.