Regression with autocorrelated data: A study of time trend of global infant mortality rate

The infant mortality rate (IMR) is considered to be one of the most important indices of a country's well-being. Countries around the world and other health organizations like the World Health Organization are dedicating their resources, knowledge and energy to reduce the infant mortality rates. The well-known Millennium Development Goal 4 (MDG 4), whose aim is to archive a two thirds reduction of the under-five mortality rate between 1990 and 2015, is an example of the commitment. ^ In this study our goal is to model the trends of IMR between the 1950s to 2010s for selected countries. We would like to know how the IMR is changing overtime and how it differs across countries. ^ IMR data collected over time forms a time series. The repeated observations of IMR time series are not statistically independent. So in modeling the trend of IMR, it is necessary to account for these correlations. We proposed to use the generalized least squares method in general linear models setting to deal with the variance-covariance structure in our model. In order to estimate the variance-covariance matrix, we referred to the time-series models, especially the autoregressive and moving average models. Furthermore, we will compared results from general linear model with correlation structure to that from ordinary least squares method without taking into account the correlation structure to check how significantly the estimates change.^

Career Crisis? Impacts of Financial Shock on the Entry-Level Labor Market: Evidence from Thailand

We utilize Thailand's the financial crisis in 1997 as a natural experiment which exogenously shifts labor demand. Convincing evidence from the Thailand Labor Force Survey support the hypothesis that both employment opportunities and wages shrunk for new entrants after the crisis. We find that workers who entered before the crisis experienced job losses and wage losses. But these losses were smaller than those of new entrants after the crisis. We also find that new entrants after the crisis experienced a 10% reduction in the overtime wages compared to new entrants before the crisis.

Integration of congestion pricing and intertemporal preference rate in social welfare function

Assessing social benefits in transport policy implementation has been studied by many researchers using theoretical or empirical measures. However, few of them measure social benefit using different discount rates including the inter-temporal preferences rate of users, the private investment discount rate and the inter-temporal preferences rate of the government. In general, the social discount rate used is the same for all social actors. Therefore, this paper aims to assess a new method by integrating different types of discount rate belonging to different social actors in order to measure the real benefits of each actor in the short, medium and long term. A dynamic simulation is provided by a strategic Land-Use and Transport Interaction (LUTI) model. The method is tested by optimizing a cordon toll scheme in Madrid considering socio- economic efficiency and environmental criteria. Based on the modified social welfare function (WF), the effects on the measure of social benefits are estimated and compared with the classical WF results as well. The results of this research could be a key issue to understanding the relationship between transport system policies and social actors' benefits distribution in a metropolitan context. The results show that the use of more suitable discount rates for each social actor had an effect on the selection and definition of optimal strategy of congestion pricing. The usefulness of the measure of congestion toll declines more quickly overtime.

A dynamic, probabilistic model for city building

The problem of interdependence between housing and commuting in a city has been analysed within the framework of welfare economics. Uncertain changes overtime in the working population has been considered by means of a dynamic, probabilistic model. The characteristics of irreversibility and durability in city building have been explicitly dealt with. The ultimate objective is that the model after further development will be an auxiliary tool in city planning.

Fiabilidad de minimodulos de silicio

El objetivo de este Proyecto Final de Carrera es la realización de un ensayo de fiabilidad de componentes electrónicos, más concretamente de Minimódulos de Silicio, con el fin de estudiar su comportamiento a lo largo del tiempo de vida. Debido a la larga duración de los Minimódulos de Silicio , un ensayo de este tipo podría durar años, por lo que es necesario realizar un ensayo acelerado que acorte significativamente el tiempo del experimento, para ello, han de someterse a esfuerzos mayores que en condiciones normales de funcionamiento. A día de hoy, los Minimódulos de silicio, que conocemos como placas solares fotovoltaicas, se usan en infinidad de dispositivos debido a las múltiples ventajas que conllevan. La principal ventaja es poder llevar electricidad a cualquier parte del planeta sin necesidad de tener que hacer unas elevadas inversiones. Esta electricidad proviene de una fuente de energía inagotable y nada contaminante, con lo que ayudamos a mantener el equilibrio del planeta. La mayoría de las veces estas placas solares fotovoltaicas se usan en el exterior, soportando cambios de temperatura y de humedad elevados, de ahí, la importancia de realizar ensayos de fiabilidad, que muestren sus posibles causas de fallo, los efectos que producen estos fallos y los aspectos de diseño, fabricación y mantenimiento que puedan afectarles. Los Minimódulos de silicio utilizados en este proyecto son el modelo MC-SP0.8-NF-GCS de la empresa fabricante Multicomp. Para realizar el Proyecto hubiéramos necesitado una cámara climática que simulara unas condiciones ambientales determinadas, pero debido a la dificultad de iluminar el módulo dentro de la cámara climática hemos desarrollado un nuevo sistema de ensayos acelerados en temperatura. El nuevo sistema de ensayos acelerados consiste en: •Colocar los módulos fotovoltaicos en el laboratorio con un foco de 500W que irradia lo equivalente al sol. •Los tres módulos trabajarán a tres temperaturas diferentes para simular condiciones ambientales distintas, concretamente a 60°C, 72°C y 84°C. •Mediante un sistema automático de medida diseñado en LabVIEW, de manera simultánea tomará medidas de tensión en las tres placas y estudiaremos el grado degradación en cada placa. Se analizaran los resultados obtenido de cada una de las medidas y se realizará un estudio de fiabilidad y del proceso de degradación sufrido por los Minimódulos de silicio. Este PFC se puede dividir en las siguientes fases de trabajo siendo el ensayo la parte más larga en el tiempo: •Búsqueda de bibliografía documentación y normas aplicables. •Familiarización con los equipos y software, estudiando el manejo del software que viene con el Multímetro Keithley 2601 y el programa LabVIEW. •Desarrollo del hardware y sistemas necesarios para la realización del ensayo. •Montaje del ensayo •Realización del ensayo. •Análisis de resultados. ABSTRACT. The objective of this Final Project is conducting a test reliability of electronic components, more specifically Silicon minimodules, in order to study their behavior throughout the life span. Due to the long duration of Silicon minimodules a test like this could take years, so it is necessary to perform an accelerated significantly shorten the time of the experiment, testing for it, should be subjected to greater efforts than in normal operating. Today, the mini-modules, silicon is known as photovoltaic solar panels are used in a multitude of devices due to the many advantages they bring. The main advantage is to bring electricity to anywhere in the world without having to make high investments. This electricity comes from an inexhaustible source of energy and no pollution, thus helping to maintain the balance of the planet. Most of the time these solar photovoltaic panels are used on the outside, enduring changes in temperature and high humidity, hence, the importance of reliability testing, showing the possible causes of failure, the effects produced by these faults and aspects of design, manufacturing and maintenance that may affect them. The silicon mini-modules used in this project are the MC-SP0.8-NF-GCS model Multicomp manufacturing company. To realize the project we would have needed a climatic chamber to simulate specific environmental conditions, but due to the difficulty of illuminating the module in the climate chamber we have developed a new system of accelerated tests in temperature. The new system is accelerated tests: •Place the PV modules in the laboratory with a focus on the equivalent 500W radiating sun. •The three modules work at three different temperatures to simulate different environmental conditions, namely at 60 °C, 72 °C and 84 °C. •Automatic measurement system designed in LabVIEW, simultaneous voltage measurements taken at the three plates and study the degradation degree in each plate. The results obtained from each of the measurements and a feasibility study and degradation suffered by the silicon is performed minimodules were analyzed. This PFC can be divided into the following phases of the test work the longest part being overtime: •Literature search and documentation standards. •Familiarization with equipment and software, studying management software that comes with the Keithley 2601 multimeter and the LabVIEW program. •Development of hardware and systems necessary for the conduct of the trial. •Experiment setup •Carrying out the experiment. •Analysis of results.

Qualitative analysis of critical moments in basketball

The aim of this paper was to know the coach point of view about the critical moment concept in basketball. The methodology used in our research is a qualitative methodology. The instrument used to obtain the data was the semi- structured interviews. There were interviewed 12 ACB league coaches during the 2011/12 season. Results show that incertitude is associated to the critical moment concept. Last minutes of close games and also overtime are identified as critical moment of the game. There is nott any variable in statistics considered by all coaches to determine the critical moment, and they were agree that respecting some game rules is basic to face up the critical moment.

Analysis of the critical moments in the League ACB 2007-2008

The aim of this paper was to identify the variables that determine winning or losing in the critical moments of the basketball games. A total of forty one critical moments were analyzed, corresponding to 30 games of the regular season from the Spanish Professional League (ACB, season 2007-2008). Games were selected according to the definition of critical moments (described in the available literature), which corresponded to overtime and the last 5 minutes of games with score differences equal or below to six points. The results revealed better values in the winners in defensive rebounds and successful free-throws.

Managing daily surgery schedules in a teaching hospital: a mixed-integer optimization approach

Background: This study examined the daily surgical scheduling problem in a teaching hospital. This problem relates to the use of multiple operating rooms and different types of surgeons in a typical surgical day with deterministic operation durations (preincision, incision, and postincision times). Teaching hospitals play a key role in the health-care system; however, existing models assume that the duration of surgery is independent of the surgeon's skills. This problem has not been properly addressed in other studies. We analyze the case of a Spanish public hospital, in which continuous pressures and budgeting reductions entail the more efficient use of resources. Methods: To obtain an optimal solution for this problem, we developed a mixed-integer programming model and user-friendly interface that facilitate the scheduling of planned operations for the following surgical day. We also implemented a simulation model to assist the evaluation of different dispatching policies for surgeries and surgeons. The typical aspects we took into account were the type of surgeon, potential overtime, idling time of surgeons, and the use of operating rooms. Results: It is necessary to consider the expertise of a given surgeon when formulating a schedule: such skill can decrease the probability of delays that could affect subsequent surgeries or cause cancellation of the final surgery. We obtained optimal solutions for a set of given instances, which we obtained through surgical information related to acceptable times collected from a Spanish public hospital. Conclusions: We developed a computer-aided framework with a user-friendly interface for use by a surgical manager that presents a 3-D simulation of the problem. Additionally, we obtained an efficient formulation for this complex problem. However, the spread of this kind of operation research in Spanish public health hospitals will take a long time since there is a lack of knowledge of the beneficial techniques and possibilities that operational research can offer for the health-care system.

Lo permanente en lo efímero: Pabellones de Exposiciones Universales, hitos de la arquitectura de la segunda posguerra

Los Pabellones de las Exposiciones Universales suelen considerarse dentro de las arquitecturas efímeras, pero habría que puntualizar que toda construcción tiene su tiempo y su periodo de extinción pudiendo ser éstos indefinidos, lo permanente en lo efímero. Muchas de las obras míticas del siglo XX existieron sólo durante unos meses, en escenarios efímeros, modificando el curso de la arquitectura con unas pocas imágenes, lo que llevaría a cuestionar si las circunstancias por las que no han sobrevivido o lo han hecho en circunstancias poco comunes, no se deben tanto a una condición efímera sino a su carácter experimental. Determinadas Exposiciones Universales fueron plataforma para que los pabellones, hitos con los que se ha construido una parte significativa de la Historia de la Arquitectura contemporánea, pasaran a convertirse en mitos, por su distancia en el tiempo, porque ya no existen y porque a veces de ellos sólo nos queda una anticuada y limitada imaginería. Las diversas Historias de la Arquitectura ponen de manifiesto la importancia de algunos pabellones y el papel que ejercieron, ejercen y ejercerán algunos de los construidos para determinadas Exposiciones Universales, pues son el testimonio de que se mantienen vivos, permaneciendo en el tiempo, desempeñando cada uno una función, bien de base para nuevos avances tecnológicos o constructivos, bien para experimentar nuevas formas de habitar, bien para educar, bien para encumbrar a sus autores hasta entonces apenas conocidos. Tanto los que se han mantenido en pie, como los que han sido trasladados y reconstruidos en un nuevo emplazamiento, o incluso los que siguieron su destino fatal y se convirtieron en arquitecturas ausentes, pero que por lo que supusieron de innovación y experimentación, todos han permanecido vivos en la arquitectura de hoy en día. Esta tesis estudia el conjunto de factores que contribuyeron a conferirles esa condición de hito, qué tipo de publicaciones hablan de ellos, en qué términos se tratan y en qué medida los relacionan con la producción de la época y/o de su autor, qué aspectos destacan, cuáles son los valores icónicos que se han ido estableciendo con el paso del tiempo…Qué es lo que permanece. Por otra parte, también aborda en qué medida su condición de construcción efímera, y gracias a su inherente necesidad de desaparecer físicamente, favoreciendo su ausencia en el recuerdo, lo que los ha dotado de representatividad. Esto podría resultar hoy en día algo contradictorio, dado el gran valor concedido a la imagen en la sociedad actual hasta el punto de convertirse en un componente esencial de la representatividad: la imagen sustituye al recuerdo pareciendo que lo que carezca de manifestación física en realidad no existiera, hasta llegar a hacerle perder toda capacidad de representación. Sin embargo, y considerando la imagen como elemento esencial de lo icónico, la reconstrucción de los pabellones una vez concluidas las exposiciones, en muchos casos no ha hecho más que potenciar su valor como arquitecturas efímeras, ya que desposeídos de su carácter temporal, los pabellones de las exposiciones pierden su razón de ser. El Pabellón de España de Corrales y Molezún para la EXPO Bruselas’58 es un claro ejemplo de ello, como se mostrará en el desarrollo de la tesis. En la tesis se exponen los distintos casos de los pabellones elegidos, rastreando, fundamentalmente en las publicaciones periódicas, el papel que en cada uno de ellos ejerció su destino final que, a pesar de no ser el objetivo o fin de la presente tesis, sí podría haber contribuido en algunos casos a dotarle de esa categoría de hito en la historia de la arquitectura. Se trata en definitiva de rastrear las vicisitudes que los han conducido a su condición de referentes arquitectónicos, de hitos de la Historia de la Arquitectura. El estudio se centra en Pabellones de las Exposiciones Universales de Bruselas’58, Montreal’67 y Osaka’70 por dos motivos fundamentales: el primero, su catalogación por el Bureau International des Expositions (BIE) como Exposiciones Universales de 1ª categoría; y el segundo, el período en el que se celebraron, período comprendido entre los años 1945 a 1970, años de profundos y determinantes cambios en la arquitectura y en los que tiene lugar el desarrollo y posterior revisión de la modernidad tras la 2ª Guerra Mundial. Se analiza la trayectoria bibliográfica de los pabellones más nombrados de estas tres Exposiciones Universales que son: de Bruselas ’58, el Pabellón de la República Federal de Alemania, de Egon Eiermann y Sep Ruf; el Pabellón Philips de Le Corbusier, y el Pabellón de España, de José Antonio Corrales y Ramón Molezún; de Montreal ’67, el Pabellón de la República Federal de Alemania, de Frei Otto, y el Pabellón de Estados Unidos, de Richard Buckminster Fuller; y de Osaka ’70, el Theme Pavilion, de Kenzo Tange, el Takara Beautilion, de Kisho Kurokawa, y el Pabellón del Grupo Fuji, de Yutaka Murata. Mediante el análisis se detecta que, ya en las revistas coetáneas a las exposiciones, estos pabellones se señalaban como edificios importantes para la historia de la arquitectura futura. Hecho que se constata con la aparición de los mismos en las historias, incluso en las más recientes, lo que demuestra su condición de hitos en la Historia de la Arquitectura ya consolidada. ABSTRACT Pavilions of the Universal Exhibitions are often considered as ephemeral architecture. However it is worth mentioning that every construction has its time and its extinction period and both of them could be indefinite/infinite, the permanent in the ephemeral. Many of the iconic works of the twentieth century lasted only for a few months, in ephemeral scenarios, changing the course of architecture but not with many images. This leads to question whether their survival under special circumstances or their extinction is mainly due to their experimental nature, and not so much to their ephemeral condition. Pavilions are at the basis of a significant part of the history of contemporary architecture. Specific Universal Exhibitions served as platforms for these landmarks to become myths, be it because of their endurance, or because they no longer exist, or even because in some cases we only have a limited and outdated imagery of them. The different Histories of Architecture highlight the importance of some pavilions and the influence they have had, have and will have some of those that were built for particular Universal Exhibitions. They are a live testimony, lasting over time, playing a specific role as basis for new technological or constructive breakthroughs; to experience new ways of living; or to educate or to raise the profile of their authors hitherto little known. Thanks to their experimental or innovative approach, some pavilions enduring overtime or that have been moved and rebuilt in a new location, or even those that followed their fate and became absent architectures, are still alive in today’s architecture. This thesis analyses the set of elements that contributed to confer the status of landmark to pavilions: what kind of publications speak of them; how they are referred to and the extent to which they are linked to their contemporary production time and / or to their author; what are elements that make them stand out; what are the iconic values that have been established as time goes by and what are those that are still valid…What is it that remains. It also assesses to what extend the condition of pavilion constructions is ephemeral. And finally, what confers them representativeness, giving their inherent need to physically disappear, favoring their absence in the memory. Today this may result somewhat contradictory as the high value of images in contemporary society has made them an essential component of representativeness. They replace remembrances to the point that it seems that what lacks physical manifestation doesn’t exist anymore, and therefore loses representation capacity. However, and considering images as an essential element of what is iconic, in most cases the reconstruction of pavilions upon completion of the exhibitions has leveraged their value as ephemeral architectures; although once deprived of their temporary character, they would lose their reason to exist. The Pavilion of Spain Corrales and Molezún for the Brusels'58 EXPO is a clear example of this, as described in the development of this document. This thesis explores the case of specific pavilions and assesses the role each one had in their final destination, by mainly tracking them in regular publications. Even though the latter is not the objective or the purpose of this thesis, the final destination of these pavilions may have contributed in some cases to grant them their landmark status in the history of architecture. Actually, this thesis is about tracking the events that have led to grant these pavilions their condition as architectural references, as landmark in the history of architecture. The study focuses on pavilions of the Universal Exhibition Brussels'58, Montreal'67 and Osaka'70 for two main reasons: first, their classification by the Bureau International des Expositions (BIE) and Universal Exhibitions 1st category; and second, the period in which they were held, from 1945 to 1970, a time of profound and decisive changes in the architecture and in the development and subsequent revision of modernity after the II World. It analyzes the bibliographic path of the most cited pavilions in the three Universal Exhibitions: in Brussels '58, the pavilion of the RFA by Egon Eiermann and Sep Rup, the pavilion of Philips by Le Corbusier and the Spain pavilion from José Antonio Corrales and Ramón Molezún; in Montreal '67 the pavilion of RFA by Frei Otto and the United States pavilion by Richard Buckminster Fuller; and in Osaka '70, the Theme Pavilion by Kenzo Tange, the Takara Beautilion by Kisho Kurokawa and the Fuji Group pavilion by Yutaka Murata. Through the analysis it is noticeable that in the contemporary publications to the exhibitions, these pavilions were already signaled out as relevant buildings to the future architecture history. The fact that they became part of the history themselves, even in the most recent times, is a prove of their condition as milestones of the consolidated History of Architecture.

O PSC E A NOÇÃO DE “FAMÍLIA TRADICIONAL” COMO IDENTIDADE PARTIDÁRIA E RELIGIOSA: ANÁLISE DO PROCESSO ELEITORAL DE 2014

A presente dissertação analisa como o Partido Social Cristão (PSC), ao longo do tempo, se apropriou da identidade religiosa de seus atores políticos que na sua maioria são membros da Frente Parlamentar Evangélica, os quais defendem no espaço público a “família tradicional”, em detrimento da pluralidade de arranjos familiares na contemporaneidade. Para explicitar o objeto - “família tradicional” e PSC -, foi necessário retroceder no tempo e investigar na historiografia os primórdios da inserção dos evangélicos na política brasileira. Em vista disso, analisamos a participação dos evangélicos nos respectivos períodos do Brasil: Colônia, Império e República. A dificuldade da entrada de evangélicos na política partidária, dentre outros fatores, se deve àinfluência do catolicismo no Estado. Assim sendo, averiguamos em todas as Constituições (1824, 1891, 1934, 1937, 1946, 1967, 1969 e 1988) o que a mesma diz no que tange a proibição e a liberdade religiosa no país. Logo, verificamos entre as Eras Vargas e República Populista, que ocorreu com intensidade a transição do apoliticismo para o politicismo entre os evangélicos brasileiros, porém, eles não recebiam o apoio formal de suas igrejas. Em seguida, a participação dos evangélicos na arena política durante a ditadura militar foi investigada com destaque para o posicionamento de vanguarda da IECLB, através do Manifesto de Curitiba e, também com a presença de parlamentares evangélicos no Congresso Nacional. A politização pentecostal é ressaltada em nosso trabalho, através do pioneirismo de Manoel de Mello e, depois na Redemocratização quando as instituições evangélicas se organizaram para eleger seus candidatos à Assembleia Nacional Constituinte. E, com o fim do regime militar, o PSC surge como partido “nanico”, contudo, deixa o anonimato e ganha visibilidade midiática quando o pastor e deputado, Marco Feliciano, assume a presidência da Comissão de Direitos Humanos e Minorias, em 2013. Esse é o pano de fundo histórico que projetou o PSC e seus atores no pleito de 2014 com o mote “família tradicional”.

Logística operacional: alocação de bases operacionais em distribuição de energia elétrica.

Ser eficiente é um requisito para a sustentabilidade das empresas concessionárias de distribuição de energia elétrica no Brasil. A busca pela eficiência deve estar em harmonia com a melhoria contínua da qualidade, da segurança e da satisfação dos consumidores e das partes envolvidas. O desafio de atender múltiplos objetivos requer que as empresas do setor desenvolvam soluções inovadoras, com a mudança de processos, tecnologia, estrutura e a capacitação das pessoas. Desenvolver um modelo operacional eficiente e uma gestão rigorosa dos custos são fatores-chave para o sucesso das empresas, considerando o contexto regulatório de revisão tarifária que incentiva a melhoria do desempenho. O modelo operacional é definido a partir da organização logística dos recursos para atendimento da demanda de serviços, que define também os custos fixos e variáveis de pessoal (salário, horas extras, refeições), infraestrutura (manutenção de prédios, ferramentas e equipamentos) e deslocamentos (manutenção de veículos, combustível), por exemplo. A melhor alocação e o melhor dimensionamento de bases operacionais possibilitam a redução dos custos com deslocamento e infraestrutura, favorecendo o aproveitamento da força de trabalho em campo, a melhoria do atendimento dos clientes e da segurança dos colaboradores. Este trabalho apresenta uma metodologia de otimização de custos através da alocação de bases e equipes operacionais, com o modelamento matemático dos objetivos e restrições do negócio e a aplicação de algoritmo evolutivo para busca das melhores soluções, sendo uma aplicação de Pesquisa Operacional, no campo da Localização de Instalações, em distribuição de energia elétrica. O modelo de otimização desenvolvido possibilita a busca pelo ponto de equilíbrio ótimo que minimiza o custo total formado pelos custos de infraestrutura, frota (veículos e deslocamentos) e pessoal. O algoritmo evolutivo aplicado no modelo oferece soluções otimizadas pelo melhoramento de conjuntos de variáveis binárias com base em conceitos da evolução genética. O modelo de otimização fornece o detalhamento de toda a estrutura operacional e de custos para uma determinada solução do problema, utilizando premissas de produtividade e deslocamentos (velocidades e distâncias) para definir as abrangências de atuação das bases operacionais, recursos (equipes, pessoas, veículos) necessários para atendimento da demanda de serviços, e projetar todos os custos fixos e variáveis associados. A metodologia desenvolvida neste trabalho considera também a projeção de demanda futura para a aplicação no estudo de caso, que evidenciou a efetividade da metodologia como ferramenta para a melhoria da eficiência operacional em empresas de distribuição de energia elétrica.

British business and the Euro. ACES Cases No. 2008.2

During the Maastricht Treaty negotiations, the United Kingdom obtained an opt-out option on Economic and Monetary Union (EMU). When Tony Blair came to power, he promised there would be a referendum on the euro if the government decided it was in the national interest to join. Many believed Tony Blair intended to call and try to win a referendum on the euro. Therefore, in the late 1990s, the debate over the euro raged in Britain, filling the pages of the tabloids and the minds of many Britons. In this paper based on empirical research conducted in London in 2005-06, I investigate whether the business sector had a clear preference on the issue of British membership in the EMU and tried to influence the government‟s decision. I use Jeffry Frieden's model of interest group preferences regarding exchange-rate policies to develop hypotheses regarding the position of the business sector on the euro. Research findings reveal that the business sector was divided on the issue of euro membership exactly as Frieden's model predicts. However, the intensity of business preferences decreased overtime. By the end of Tony Blair's second term, the business sector had become neutral on the issue of the euro.

Arbeitszeit-verlängerungen (Überstunden) im Jahre ... fabrikmässigen Betreiben /

Title varies slightly.

Violations of the Fair Labor Standards Act : inferences from the 1979 noncompliance survey /

"Number 17. March 24, 1981."

Before the United States Railroad Labor Board; exhibit ...

[1] The development of collection bargaining on a national basis.--[2] Industrial relations on railroads prior to 1917.--[3] The sanction of the eight-hour day.--[4] Seniority rules of the national agreement.--[5] The recognition of human standards in industry.--[6] Human standards and railroad policy.--[7] Railroad boards of labor adjustment.--[8] Punitive overtime.--[9] Rules prior to national agreement.--[10] Occupation hazard of railway shopmen.--[11] The work of the railway carmen.--[12] The unity of the American railway system.--[13-16] Inadequacies of railway management, part I-IV.--[17] Specific cases cited by Mr. Whiter, and employees' rebuttal.--[18] Standardization.--[19] The problem of piece work.