Emprego da técnica de emissão por fluorescência de ultravioleta no monitoramento de inibidores de corrosão em água produzida

Para aumentar os volumes de extração de petróleo, resolver e prevenir problemas nas operações de produção são utilizados diversos produtos químicos, dentre os quais se destacam os inibidores de corrosão, que são utilizados em toda cadeia produtiva do petróleo visando proteger o sistema da deterioração por corrosão. Os sais de amônio quaternário são uma das classes de inibidores mais utilizadas pela indústria do petróleo devido a sua grande eficiência. Entretanto, sua solubilidade em água faz com que estejam presentes na água produzida representando um risco para contaminação ambiental, visto que possuem baixa biodegrabilidade e potencial de bioacumulação. Como se encontram misturados a outros produtos químicos e sob efeitos das variações do ambiente em que são aplicados, definir um método de análise confiável e viável para monitoramento em linha representa um desafio para os laboratórios de campos de produção. Neste trabalho, foi estudado o emprego da fluorescência de ultravioleta na quantificação de um inibidor de corrosão do tipo sal de amônio quaternário em água. Foram obtidos espectros de emissão do produto comercial em água, além do estudo de variáveis instrumentais e interferentes presentes na água produzida. A comparação com padrões de sal de amônio quaternário permitiu identificar como principal fluorófilo, um sal alquil-aril de amônio quaternário. Estudos de estabilidade revelaram que a adsorção do inibidor de corrosão nas superfícies dos frascos plásticos provoca a queda do sinal fluorescente e que a adição de isopropanol reduz este efeito de 40 para 24%. Foram obtidas curvas de calibração com a formulação comercial e com o cloreto de 2-metil-4-dodecil-benzil-trimetil amônio com uma boa correlação. Amostras sintéticas do inibidor foram determinadas com um erro relativo de 2,70 a 13,32%. O método de adição padrão foi avaliado usando uma amostra de água produzida, e os resultados não foram satisfatórios, devido à interferência, principalmente, de compostos orgânicos aromáticos presentes

Análise dinâmica de plataformas de aço para produção de petróleo com base na consideração do efeito da interação solo-estrutura

Atualmente, as tendências competitivas do mercado mundial, têm forçado os engenheiros estruturais a desenvolver soluções de projeto que acarretem em menor peso e custo de execução. Uma consequência direta desta nova tendência de projeto é o aumento considerável de problemas relacionados a vibrações de piso indesejadas. Por esta razão, os sistemas estruturais de pisos podem tornar-se vulneráveis a vibrações excessivas, como por exemplo, aquelas induzidas por equipamentos mecânicos (máquinas rotativas). Deste modo, este trabalho objetiva investigar o comportamento dinâmico de uma plataforma de aço para produção de petróleo, localizada na bacia de Santos (campo de Merluza), São Paulo, Brasil. Para tal, investiga-se a influência das ações dinâmicas oriundas dos equipamentos mecânicos localizados sobre os decks metálicos da plataforma. A resposta dinâmica do modelo estrutural foi determinada através de um extenso estudo numérico, a partir da análise de suas frequências naturais, deslocamentos, velocidades e acelerações de pico. Nesta investigação, as cargas dinâmicas provenientes dos equipamentos mecânicos (máquinas rotativas) foram aplicadas sobre o piso metálico do sistema estrutural. Com base obtenção da resposta dinâmica da estrutura (deslocamentos, velocidades e acelerações), foi possível avaliar a performance do modelo estrutural em termos de critérios de conforto humano e das tolerâncias máximas referentes aos equipamentos mecânicos, de acordo com normas e recomendações de projeto.

Análise da dinâmica espaço-temporal de culturas agrícolas no Brasil: uma abordagem metodológica.

Atualmente, o Brasil se apresenta como um grande produtor agrícola mundial com finalidade alimentícia e bioenergética. Ano a ano recordes de produção são batidos pelo setor agropecuário. Por outro lado, tem-se uma perspectiva de problemas alimentícios e energéticos no mundo, em especial no continente africano onde muitos vivem na miséria e na fome. Neste contexto, esta dissertação de mestrado apresenta uma proposta para a análise da dinâmica espaço-temporal de culturas agrícolas empregando os conceitos e instrumentos da Geomática em busca do desenvolvimento sustentável. Desenvolveu-se uma metodologia para a geração de indicadores da produção agrícola em diferentes níveis da estrutura territorial brasileira que permite a apresentação sintética, por meio de cartogramas e animações digitais, das dinâmicas espacial e espaço-temporal das principais culturas. Para isto foi criada uma base de dados da produção das principais culturas, desenvolvidos indicadores que representem a dinâmica espacial da produção agrícola e desenvolvidas ferramentas de apresentação destes indicadores através da dinâmica espaço-temporal. Finalmente, foram relacionadas as áreas voltadas à produção de alimentos e de expansão agrícola para a bioenergia (etanol e óleo de palma). Pretende-se, através deste trabalho, contribuir na tomada de decisão com ferramentas de visualização da realidade agropecuária brasileira. O trabalho estabelece ligações com os zoneamentos agroecológicos, os instrumentos de segurança alimentar e a pegada ecológica, com a apresentação da produção agrícola das culturas como cana-de-açúcar, milho, soja, palma de óleo e algodão.

Proposição de um indicador global de funcionalidade operacional para sistemas de processamento primário em instalações marítimas de produção de petróleo: estudo de caso para o sistema de separação e tratamento de óleo

Este texto verificou o tema de monitoramento de processos de produção de petróleo em plataformas no mar de forma a propor indicadores globais para monitoramento da funcionalidade dos equipamentos que envolvem estes processos, permitindo a antecipação da tomada de decisão sobre suas eminentes quedas de disponibilidade. Para tal, buscando conhecer as áreas envolvidas na gestão de uma plataforma de petróleo no mar, foram identificados os principais sistemas relacionados ao processo de produção de petróleo e optou-se pelo Sistema de Separação e Tratamento de Óleo para desenvolvimento e validação dos indicadores propostos. O Indicador Global de Funcionalidade Operacional (IGFO) foi desenvolvido a partir dos dados disponíveis para monitoramento dos processos de produção de petróleo, focado nas visões das principais áreas envolvidas na gestão da plataforma. Este indicador foi elaborado com objetivo de simplificar a análise dos processos, permitindo assim aferir o desempenho das ações de monitoramento de processos em plataformas de petróleo, de modo a atuar de forma antecipativa, contribuindo com a identificação e a disseminação das melhores práticas de manutenção preditiva. Neste aspecto, os indicadores na forma de normalização utilizada permitem comparações em diversos níveis, tanto em relação as plataformas dentro de uma empresa, como plataformas de empresas diferentes. Os indicadores globais propostos obtiveram resultados que permitiram avaliar a queda de funcionalidade dos equipamentos do Sistema de Separação e Tratamento de Óleo durante o período avaliado, servindo de base para identificação das causas das falhas destes equipamentos. Assim sendo, pôde-se perceber que a utilização dos indicadores globais identificados pode responder com sucesso às necessidades propostas

Evolução do refino de petróleo no Brasil

Este trabalho tem por objetivo apresentar a evolução da indústria do refino de petróleo no Brasil desde suas origens, sua evolução ao longo dos anos, explicitando as mudanças no perfil de produção, na matéria prima processada e na complexidade das nossas refinarias. Busca, também, apresentar os próximos passos para o refino de petróleo nacional, seus desafios face a produção de petróleos pesados e ácidos, bem como os impactos provocados pela necessidade de produção de derivados com especificações cada vez mais restritivas e com menor impacto ambiental. Optou-se pelo hidrorrefino como o primeiro grande passo para os próximos anos concluindo-se que unidades para o hidrotratamento de correntes intermediárias ou mesmo produto final assumirão um papel fundamental nos futuros esquemas de refino. Outra vertente importante analisada foi a necessidade de aumento de conversão, ressaltando-se que o caminho hoje escolhido de implantação de Unidades de Coqueamento Retardado se esgota no início da próxima década abrindo caminho para a tecnologia de hidroconversão de resíduo. Com relação à qualidade da gasolina e do óleo diesel foi apresentada uma proposta de esquema de refino para permitir o atendimento de especificações mais rígidas

Análise matemática de soluções descontínuas de leis de conservação hiperbólicas e resoluções numéricas para a captura de ondas de choque em escoamentos multifásicos em meios porosos

O processo de recuperação secundária de petróleo é comumente realizado com a injeção de água ou gás no reservatório a fim de manter a pressão necessária para sua extração. Para que o investimento seja viável, os gastos com a extração precisam ser menores do que o retorno financeiro obtido com a produção de petróleo. Objetivando-se estudar possíveis cenários para o processo de exploração, costuma-se utilizar simulações dos processos de extração. As equações que modelam esse processo de recuperação são de caráter hiperbólico e não lineares, as quais podem ser interpretadas como Leis de Conservação, cujas soluções são complexas por suas naturezas descontínuas. Essas descontinuidades ou saltos são conhecidas como ondas de choque. Neste trabalho foi abordada uma análise matemática para os fenômenos oriundos de leis de conservação, para em seguida utilizá-la no entendimento do referido problema. Foram estudadas soluções fracas que, fisicamente, podem ser interpretadas como ondas de choque ou rarefação, então, para que fossem distinguidas as fisicamente admissíveis, foi considerado o princípio de entropia, nas suas diversas formas. As simulações foram realizadas nos âmbitos dos escoamentos bifásicos e trifásicos, em que os fluidos são imiscíveis e os efeitos gravitacionais e difusivos, devido à pressão capilar, foram desprezados. Inicialmente, foi feito um estudo comparativo de resoluções numéricas na captura de ondas de choque em escoamento bifásico água-óleo. Neste estudo destacam-se o método Composto LWLF-k, o esquema NonStandard e a introdução da nova função de renormalização para o esquema NonStandard, onde obteve resultados satisfatórios, principalmente em regiões onde a viscosidade do óleo é muito maior do que a viscosidade da água. No escoamento bidimensional, um novo método é proposto, partindo de uma generalização do esquema NonStandard unidimensional. Por fim, é feita uma adaptação dos métodos LWLF-4 e NonStandard para a simulação em escoamentos trifásicos em domínios unidimensional. O esquema NonStandard foi considerado mais eficiente nos problemas abordados, uma vez que sua versão bidimensional mostrou-se satisfatória na captura de ondas de choque em escoamentos bifásicos em meios porosos.

Caracterização e pirólise de arenitos asfálticos oriundos da Formação Pirambóia, Bacia do Paraná: avaliação da viabilidade para produção de óleo

Neste trabalho, algumas caracterizações químicas foram realizadas em arenitos asfálticos da região de Piracicaba-SP, Formação Piramboia da Bacia do Paraná, para verificar seu potencial de produção de óleo. Para isso, as amostras obtidas da região foram submetidas a avaliação por termogravimetria, teor de umidade, teor de cinzas, teor de material orgânico por extração, pirólise, análise elementar e fracionamento em coluna. Por TGA observou-se que a 500 C praticamente todo material orgânico presente sofreu pirólise. A extração colaborou para se obter a classificação das amostras quanto ao teor de material orgânico, apresentando entre 4 e 13%, sendo que pelos teores encontrados a amostra AM06 é considerada de alto potencial produtivo, as amostras AM05, AM08 e AM09 são de médio, as amostras AM01, AM02, AM03 e AM07 possuem baixo, mas ainda atrativo, e a AM04 não possui atratividade. Pela avaliação elementar, a relação H/C e O/C dos extratos evidenciaram que algumas amostras estão no processo final da diagênese e outras no início da catagênese, indicando que elas estão no processo inicial de maturação. A avaliação cromatográfica dos extratos revelou que houve perdas de óleo por intemperismo restando majoritariamente compostos de alto peso molecular. O fracionamento permitiu verificar que as amostras AM01, AM06 e AM09 possuem maior quantidade de hidrocarbonetos livres e as amostras AM06 e AM07 e AM09 apresentaram maior teor de óleo. O procedimento de pirólise evidenciou que as amostras AM01, AM05, AM06 e AM09 apresentam maior potencial de geração de óleo, sendo que a faixa encontrada de óleo pirolítico ficou entre 2 e 8%, e através de avaliação por CGAR e CGAR-EM observou-se que ela promove a liberação de quantidades consideráveis de substâncias mais leves do que quando comparados aos extratos obtidos diretamente nas amostras originais. Além de produzir uma série homóloga de hidrocarbonetos parafínicos e olefínicos. A comparação dos produtos de pirólise dos arenitos com os produtos de pirólise de um resíduo de vácuo por CGAR-EM permitiu observar que existe similaridade entre suas composições, onde o processo de pirólise do resíduo de vácuo gera uma série homóloga de hidrocarbonetos entre C10 a C32, similar aos produtos de pirólise da amostra AM09, porém com menor variedade de tipos de hidrocarbonetos. A pré-avaliação da co-pirólise dos arenitos com resíduos plásticos indicou que é possível aumentar a geração de líquidos, porém é necessário mais estudo para afirmações inequívocas. Com base nos resultados das avaliações realizadas podemos concluir que a região apresenta na sua maioria potencial interessante para produção de óleo utilizando pirólise

Microanálise e geoquímica em testemunhos de corais como elementos de interpretação dos impactos das forçantes naturais e antrópicas sobre a costa do Brasil

Corais pétreos são formadores de recifes. Por secretarem carbonato de cálcio pela base de seus pólipos, esses corais zooxantelados formam um exoesqueleto, composto geralmente por cristais de aragonita. Os padrões de crescimento coralinos variam desde a escala sazonal a centenária e podem ser caracterizados pela medida da taxa de crescimento, a variabilidade dos isótopos estáveis de oxigênio e carbono e pelas razões elementares Sr/Ca, Mg/Ca, U/Ca, Cd/Ca, Ra/Ca (entre outras) em seu esqueleto. Em um contexto global, os recifes cumprem importante papel como sumidouros de carbono atmosférico. Diante das evidências de um oceano mais quente na era moderna, a temperatura da superfície do mar (TSM) tem sido considerada um importante fator de controle da calcificação e crescimento coralino. Geralmente, a calcificação tende a aumentar com a elevação da TSM dentro de uma estreita faixa aceitável para o funcionamento pleno do metabolismo coralino. Neste trabalho, desenvolveu-se uma re-análise das taxas de crescimento de testemunhos de corais amostrados na costa brasileira (Salvador-Ba - Baía de Todos os Santos, Parque Nacional Marinho dos Abrolhos-Ba e Armação dos Búzios-RJ) empregando-se uma combinação de bandas de crescimento (alta e baixa densidades) auxiliado pelo método de luminescência e datação por radioisótopos de U e Th. As diferenças nas cronologias para os dois métodos variou de 1 ano para o caso de Abrolhos até 7,4 anos para Búzios (em seções específicas do testemunho). Foram analisadas variações de calcificação no esqueleto coralino e interpretadas à luz das razões Sr/Ca e U/Ca (ambos próxies da TSM), séries climáticas de AMO e PDO, e pH pelágico oceânico. Identificamos uma diminuição na taxa de calcificação do exoesqueleto no tempo estudado na amostra de Salvador de 0,4 g/cm2, e um aumento em Abrolhos de 0,4 g/cm2 e Búzios 0,3 g/cm2, exceto nos anos de 1950 ao final de 1980 e de 1910 ao final de 1930, respectivamente. Uma microtomografia de raio-X foi empregada para determinar micro-estruturas coralinas, sendo os parâmetros mais relevantes a microporosidade e a anisotropia. Para Abrolhos e Búzios, foi identificado um aumento na porosidade total do exoesqueleto, principalmente no começo de 1940 até o fim da década de 1980 e entre 1890 a 1930 respectivamente. Notou-se forte associação entre a redução do padrão de calcificação com o aumento da porosidade. Os testemunhos da espécie Siderastrea stellata coletados em Abrolhos e Búzios mostraram alta associação das razoes Sr/Ca e U/Ca com a taxa de calcificação, caracterizando uma resposta similar a de outros autores para a Grande Barreira na Austrália (DE'ATH et al., 2009) e para a região central do Mar Vermelho (CANTIN et al., 2010). Em relação as razões Ba/Ca, Salvador e Abrolhos evidenciaram variáveis que contribuíram para este aumento como a forçante de produção de petróleo e aumento populacional (economia), e TSM (oceano). Para Búzios, a TSM (oceano), produção de petróleo, aumento populacional e NDVI (economia). Após os anos de 1990, o impacto dos fatores econômicos, além das variáveis oceânicas respondem mais significativamente o aumento da razão Ba/Ca em todos os sítios quase que concomitantemente na costa brasileira.

A high throughput Nile red method for quantitative measurement of neutral lipids in microalgae

Isolation of high neutral lipid-containing microalgae is key to the commercial success of microalgae-based biofuel production. The Nile red fluorescence method has been successfully applied to the determination of lipids in certain microalgae, but has been unsuccessful in many others, particularly those with thick, rigid cell walls that prevent the penetration of the fluorescence dye. The conventional "one sample at a time" method was also time-consuming. In this study, the solvent dimethyl sulfoxide (DMSO) was introduced to microalgal samples as the stain carrier at an elevated temperature. The cellular neutral lipids were determined and quantified using a 96-well plate on a fluorescence spectrophotometer with an excitation wavelength of 530 nm and an emission wavelength of 575 run. An optimized procedure yielded a high correlation coefficient (R-2 = 0.998) with the lipid standard triolein and repeated measurements of replicates. Application of the improved method to several green algal strains gave very reproducible results with relative standard errors of 8.5%, 3.9% and 8.6%, 4.5% for repeatability and reproducibility at two concentration levels (2.0 mu g/mL and 20 mu g/mL), respectively. Moreover, the detection and quantification limits of the improved Nile red staining method were 0.8 mu g/mL and 2.0 mu g/mL for the neutral lipid standard triolein, respectively. The modified method and a conventional gravimetric determination method provided similar results on replicate samples. The 96-well plate-based Nile red method can be used as a high throughput technique for rapid screening of a broader spectrum of naturally-occurring and genetically-modified algal strains and mutants for high neutral lipid/oil production. (C) 2009 Published by Elsevier B.V.

南堡油田测试资料综合评价及试油配套工艺技术研究与应用

A series of significant oil-gas exploration progresses have been achieved in Nanpu depression with 1.02 billion ton oil-gas reserves have been proven. It has been confirmed that Nanpu beach has a geologic condition to be a major field based on exhaustive research. This finding, which is integrated reservoir，great reserves, thick oil layer and high productivity in Nanpu depression, is the most excited success in Chinese oil-gas exploration in recent years. This abundant oilfield found is significant to the strategy of oil production stability in the east of China. Nanpu depression exploration is also a crucial exploration project for Petrochina. Based on the comprehensive research on Nanpu formation testing data, we reevaluate and analyze the reservoir property and the structure characteristics, and propose a series of testing technique that are suitable for Jidong oil field development. The results are summarized as follows: 1. The reservoir parameters and characters are defined by formation test data interpretation and systemic dynamic-static data comparison. 2. Based on sources analysis and statistical research related to formation contaminants, some technique measures, which can not only prevent or reduce invasion damage for different formations but also can effectively improve completion efficiency, are proposed. 3. By selecting the testing pressure drawdown, optimum working regulation and flow /shut-in duration, and adopting dynamic-static flow parameters correlation analysis to predict production, an optimum research on working regulation and flow /shut-in duration was accomplished. Optimization formation test principles suitable for any kinds of Nanpu oilfield are established, which can improve test quality, construction efficiency and data recording quality. 4. By reasonable selection of perforating gun and penetrating charge, the perforation penetration has been improved effectively and the flow channel of the oil gas have been expanded, so that the communication between formations and the wellbore is improved better. 5. One joint working procedure which combining formation test, perforation, unloading and stimulation treatment has become the dominant testing technology in the Nanpu offshore Oilfield. This combination technique can implement several procedures using one pipe string, and achieve rapid testing purpose.

松辽盆地南部腰英台区块低渗透储层整体压裂改造技术研究

The Yaoyingtai Block is located within the northeastern Changling Depression of southern Songliao Basin, where the reservoir sandstones are petrophysically characterized by very low permeability, which results in the low success probability of artificial fracturing, and the low oil yield by water injection in the course of oil production. In order to improve the situations as stated above, this research aims to work out an integral fracturing technology and strategy applicable to the low permeable reservoirs in Yaoyingtai Block. Under the guidance of geological theory, reservoir engineering and technology, the subsurface occurrences of natural and hydraulic fractures in the reservoirs are expected to be delineated, and appropriate fracturing fluids and proppants are to be optimized, based on the data of drilling, well logging, laboratory and field experiments, and geological data. These approaches lay the basis of the integral fracturing technology suitable for the low permeable reservoir in the study area. Based on core sample test, in-situ stress analysis of well logging, and forward and inversion stress field modeling, as well as fluid dynamic analysis, the maximum in-situ stress field is unraveled to be extended nearly along the E-W direction (clustering along N85-135°E) as is demonstrated by the E-W trending tensional fractures. Hydraulic fractures are distributed approximately along the E-W direction as well. Faulting activities could have exerted obvious influences on the distribution of fractures, which were preferentially developed along fault zones. Based on reservoir sensitivity analysis, integrated with studies on rock mechanics, in-situ stress, natural fracture distribution and production in injection-production pilot area, the influences of primary fractures on fracturing operation are analyzed, and a diagnostic technology for primary fractures during depressurization is accordingly developed. An appropriate fracturing fluid (hydroxypropyl guar gum) and a proppant (Yixing ceramsite, with a moderate-density, 0.45-0.9mm in size) applicable to Qingshankou Formation reservoir are worked out through extensive optimization analysis. The fracturing fluid can decrease the damage to the oil reservoir, and the friction in fracturing operation, improving the effect of fracturing operation. Some problems, such as sand-out at early stage and low success rate of fracturing operations, have been effectively solved, through pre-fracturing formation evaluation, “suspension plug” fracturing, real-time monitoring and limited-flow fracturing. Through analysis of fracture-bearing tight reservoir with variable densities and dynamic analysis of influences of well patterns on fracturing by using numerical simulation, a fracturing operation scheme for the Qingshankou Formation reservoir is proposed here as being better to compress the short factures, rather than to compress the long fractures during hydraulic fracturing. It is suggested to adopt the 450m×150m inverted 9-spot well pattern in a diamond shape with wells placed parallel to fractures and a half fracture length of 60-75m.

三角洲储层孔隙结构模型与剩余油分布研究——以临南油田沙河街组储层为例

The study of pore structure in reservoir was paid attention to in the early reservoir research and now a systematic research methodology is set up. On the limits of tools and conditions, methodologies and technologies on formation condition and distribution laws of pore structure and the relationship between remaining oil distribution and pore structure are uncertain and some knownage about it is also uncertain. As the development of petroleum industry, the characterization of pore structure and the prediction of remaining oil are the hot spot and difficult point in the research of oil development. The author pays a close attention to this subject and has done much research on it. In a case study in Linnan oilfield Huimin sag Jiyang Depression Bohai Bay basin by using a new method, named varied scale comprehensive modeling of pore structure, the author builds pore structure models for delta reservoir, reveals the remaining oil distribution laws in delta facies, and predicts the distribution of remaining oil in Linnan oilfield. By the application of stratigraphy, sedimentology and structure geology. the author reveals the genetic types of sandbody and its distribution laws, builds the reservoir geological models for delta sandstone reservoir in Shahejie group in Linnan oilfield and points out the geological Factors that control the development of pores and throats. Combining petrology and the reservoir sensitive analysis, the author builds the rock matrix models. It is the first time to state that rocks in different sentimental micro facies have different sensitive .response to fluid pressed into the rocks. Normally. the reservoirs in the delta front have weaker sensitivity to fluid than the reservoirs in delta plain, In same subfacies, the microfacies that have fine grain, such as bank and crevasse splay, have stronger reservoir sensitivity than the microfacies that have coarse grains, such as under-water branched channel and debauch bar. By the application of advanced testing, such as imagine analysis, scan electronic microscope, and morphology method, the author classifies the pore structure and set up the distribution models of pore, throat and pore structure. By the application of advanced theory in well-logging geology, the author finds the relationship between microscope pore structure and macroscopic percolation characteristics, and then builds the well-logging interpretation formulae for calculating pore structure parameters. By using the geostatistics methods, the author reveals the spatial correlative characteristics of pore structure. By application of conditional stochastic simulation methods, the author builds the 3D models of pore structure in delta reservoir. It is the base of predicting remaining oil distribution. By a great deal of experiments and theoretical deduction, The author expounds the laws of percolation flow in different pore structures, and the laws by which the pore structure controls the micro distribution of remaining oil, and then, states the micro mechanism of remaining oil distribution. There are two types of remaining oil. They are by-pass flow caused by micro-fingering and truncation caused by non-piston movement. By new method, the author states the different pore structure has different replacement efficiency, reveals the formation condition and distribution laws of remaining oil. predicts the remaining oil distribution in Linnan oil field, and put forward some idea about how to adjust the oil production. The study yielded good results in the production in Linnan oilfield.

河流成因储层沉积微相与剩余油分布及形成机理研究

Based on the study of fluvial sandstone reservoir in upper of Guantao group in Gudao and Gudong oilfields, this paper first introduces A.D.Miall's(1996a) architectural-element analysis method that was summarized from ground outcrop scale into the reservoir formation research of the study area, more subtly divides sedimentary microfacies and establishes sedimentary model of research area.on this base, this paper summarizes the laws of residual oil distribution of fluvial formation and the control effect of sedimentary microfacies to residual oil distribution, and reveals residual oil formation mechanism. These results have been applied to residual oil production, and the economic effect is good. This paper will be useful for residual oil research and production and enhancement of oil recovery in similar reservoir. The major conclusions of this paper are as follows. 1. Using the architectural-element analysis method to the core data, a interfacial division scheme of the first to the dixth scale is established for the studied fluvial formation. 2.Seven architectural-elements are divided in upper of Guantao group of study area. The sandstone group 5～1+2 of Neogene upper Gutao group belongs to high sinuous fine grain meandering river, and the sandstone group 6 is sandy braided river. 3. Inter layer, the residual oil saturation of "non-main layer" is higher than "main layer", but the residual recoverable reserve of former is larger. Therefore, "main layer" is the main body of residual oil distribution. The upper and middle part of inner layer has lower permeability and strong seeping resistance. Addition to gravity effect in process of driving, its driving efficiency is low; residual oil saturation is high. Because of controlling of inside non-permeable interlayer or sedimentary construction, the residual oil saturation of non-driving or lower driving efficiency position also is high. On plane, the position of high residual oil saturation mostly is at element LV, CS, CH (FF), FF etc, Which has lower porosity and permeability, as well as lens sand-body and sand-body edge that is not controlled by well-net, non-perfect area of injection and production, lower press difference resort area of inter-well diffiuent-line and shelter from fault, local high position of small structure. 4.Microscopic residual oil mainly includes the non-moved oil in the structure of fine pore network, oil in fine pore and path, oil segment in pore and path vertical to flow direction, oil spot or oil film in big pore, residual oil in non-connective pore. 5.The most essential and internal controlling factor of fluvial formation residual oil distribution is sedimentary microfacies. Status of injection and production is the exterior controlling factor of residual oil distribution. 6. The controlling effect of formation sedimentary microfacies to residual oil distribution indicates inter-layer vertical sedimentary facies change in scale of injection and production layer-series, planar sedimentary face change and inner-layer vertical sedimentary rhythm and interbed in single layer to residual oil distribution. 7. It is difficult to clear up the inter-layer difference in scale of injection and production layer-series. The using status of minor layer is not good and its residual oil saturation is high relatively. It is obvious that inter-layer vertical sedimentary facies changes control inter-layer residual oil distribution at the same or similar conditions of injection and production. For fluvial formation, this vertical sedimentary facies change mainly is positive gyration. Namely, from down to top, channel sediment (element CHL, LA) changes into over-bank sediment (element LV, CR, CS). 8. In water-injection developing process of transverse connecting fluvial sandstone oil formation, injection water always comes into channel nearby, and breaks through along channel and orientation of high pressure gradient, does not expand into side of channel until pressure gradient of channel orientation changes into low. It brings about that water-driving status of over-bank sedimentary element formation (LV, CR, CS) is not good, residual oil saturation is high. In non-connective abandoned channel element (CH) formation with channel, because this reverse is difficult to control by injection and production well-series, its using status is not good, even terribly not good, residual oil is enrichment. 9. The rhythm and sedimentary structure, sedimentary facies change in single sand body brings about vertical changes of formation character, growth character of inner layer interbed. These are important factor of controlling and affecting vertical water spread volume and inner layer residual oil forming and distribution in single sand body. Positive rhythm, is the principal part of fluvial sandstone inner layer sedimentary rhythm. Namely, from down to upside, rock grain granularity changes from coarse to fine, seeping ability changes from strong to feebleness. It brings about that water-driving status of inner layer upside is not good, residual oil saturation is high. Inner layer interbed has different degree affecting and controlling effect to seeping of oil and water. Its affecting degree lies on interbed thickness, extending scale, position, and jeted segment of production or injection well. The effect of interbed at upside of oil formation to oil and water seeping is less; the effect of interbed at middle of oil formation to oil and water seeping is more. 10. Indoor experiment and research indicate that wettability, permeability step, vertical permeability, position of Kmax and ratio of oil viscousity and water viscousity all have great effect on the water-driving recovery ratio. 11. Microscopic residual oil distribution is affected and controlled by formation pore network structure, pressure field distribution, and oil characteristic. 12.The residual oil forming mechanism: the over-bank sedimentary element and upper part of a positive rhythm sandstone have fine pore and throat network, permeability is low, displacement pressure of pore and throat is high. The water-driving power usually falls short of displacement pressure that brings about injection water does not spread into these pore and throat network, thereby immovable oil area, namely residual oil, is formed. At underside of channel sedimentary element and positive rhythm sandstone, porosity and permeability is relatively high, connecting degree of pore and throat is high, displacement pressure of pore and throat is low. Thereby injection water is easy to enter into pore and throat, driving oil in them. Because the pore space is irregular, the surface of pore wall is coarse and non-flat. That the oil locate on concave hole of pore wall and the dead angle of pore, and the oil attaches on surface of pore wall by surface tension, are difficult to be peeled off, becoming water-driving residual oil (remaining oil). On the other hand, Because flowing section lessens, flowing resistance increase, action of capillary fore, or seeping speed decreases at process of transfer at pass narrow throat path in the course carried by driving water. The "oil drop", "oil bead", or "oil segment" peeled off by driving water is difficult to carry and to drive out by water at less pressure difference. Thereby they are enclosed in pore to form discontinuous residual oil. 13.This results described above have been applied in nine develop blocks of Gudao and Gudong oilfield. Its applying effect is marked through local injection production adjustment, deploying replacement well, repair hole, replacement envelop, block off water and profile control etc. Relative method and technology can be applied to other oil production area of Shengli oilfield, and obtain better economic and societal effect.

东营凹陷辛镇复杂断块油藏形成机制和剩余油分布规律研究

In this paper, the complex faulted-block oil reservoir of Xinzhen area in Dongying depression is systematically studied from basic conditions forming faulted-block oil and gas reservoir integrating geology, seismic, logging and reservoir engineering information and computer; guided by petroleum geology, geomechanics, structural geology and geophysics and other theories. Based on analysis of background condition such as regional strata, structure and petroleum geology, structural research on geometry, kinemaitcs and dynamics, oil-controlling fault research on the seal features, sealing mechanism and sealing pattern, and research on enrichment rules and controlling factors of complex faulted-block oil reservoir are carried out to give out the formation mechanics of oil reservoir of Xinzhen complex faulted-block oil reservoir. As a result, the reservoir formation pattern is established. At the same time, through dissecting the characteristics and hydrocarbon enrichment law of complex faulted-block oil reservoir, and studying its distribution law of remaining oil after entering extra high water-cut period, a set of technologies are formed to predict complex faulted-block oil reservoir and its remaining oil distribution and to enhance oil recovery (EOR). Based on the time relationship between migration of hydrocarbon and trap formation, accumulating period of Xinzhen oil reservoir is determined. The formation of Xinzhen anticlinal trap was prior to the primary migration. This is favorable to formation of Xinzhen anticlinal hydrocarbon reservoir. Meanwhile, because anticline top caving isn't at the sane time as that of moving or faulted-trap forming inner anticline, oil and gas migrated many times and Xinzhen complex faulted-block oil reservoir formed from ES_3~(upper) to EG. Accumulating law and controlling factors of complex faulted-block reservoir are analyzed from many aspects such as regional structure background controlling hydrocarbon accumulating, plastic arch-open structure controlling oil-bearing series and reservoir types, sealing-opening of fault controlling hydrocarbon distribution and structure pattern controlling enriched trap types. Also, we established the structure pattern in Xinzhen a'ea: the arch-open of underlying strata cause expanding fracture. The main block groups developed here are shovel-like normal fault block group in the north area of Xinzhen and its associated graben block group. Block groups dominate the formation and distribution of reservoirs. We studied qualitatively and quantitatively the sealing characteristics, sealing history and sealing mechanism of faults, too. And, the sealing characteristics are evaluated and the distribution pattern of hydrocarbon controlled by faults is researched. Due to movement intensity of big faults, deep falling of downthrown block, high degree of repture and development of fracture, shallow layers close to the downthrown block of secondary faults are unfavorable to hydrocarbon accumulation. This is confirmed by the exploration practice in Xinzhen anticline. In terms of the downthrown blocks of sencondary contemporaneous faults lied in the south and north area of Xinzhen, hydrocarbon is poor close to fracture belt, while it is relatively abundant in tertiary companion faults. Because of long-term movement of faults that control hydrocarbon, fi'om ES3 to EG, six set of oil-bearing series formed. And their opening causes the inhomogeneity in hydrocarbon abundance among each block--in two flanks of anticline reservoirs are abundant while in the axial area, oil and gas are sporadic. There the sealing characteristics control oil-bearing area of oil/gas accumulation and the height of oil reservoir. Longitudinally, oil and gas are enriched in dip-flat areas in mid-plane of faults. It is established that there are four types of accumulating patterns in complex faulted-block oil reservoirs in Xinzhen. The first is accumulating pattern of lithologic oil reservoirs in E~S_3~(mid-lowwer), that is, self-generating-self-reserving-self-covering lithologic trap pattern. The second is drag-anticline accumulating pattern in Xinzhen. The structure traps are drag anticlines formed by the contemporaneous faults of the second basement in the north of Xinzhen, and the multiple source rocks involve Ek_2, Es_4, Es_3 and Es_1 members. The reservoirs are fluvial-delta sandstones of the upper member of Shahejie formation and Guantao formation, covered by regional thick mudstone of the upper member of Guantao formation and MingHuazhen formation. The third is the accumulating pattern of reverse listric fault, the third-degree fault of Xinzhen anticline limb and the reservoirs form reservoir screened by reverse listric faults. The forth is accumulating pattern of crossing faults which form closing or semi-closing faulted-blocks that accumulate hydrocarbon. The technologies of predicting remaining oil in complex faulted-block reservoir during the mid and late development stage is formed. Remaining oil in simple large faulted-blocks enriches in structural high, structural middle, structural low of thick bottom water reservoirs, points near bent edge-fault oftertiary faults and part the fourth ones with big falling displacement, microstructure high place of oil-sandbodies and areas where local well pattern isn't perfect. While that in small complex faulted-blocks enriches near small nose, small high point, angle of small faults, small oil-bearing faulted-blocks without well and areas with non-perfect well pattern. The technologies of enhancing recovery factor in complex faulted-block reservoir during the mid and late development stage is formed as follows: fine reservoir description, drilling adjust wells, designing directional wells, sub-dividing layer series of development, improving flooding pattern, changing water-injection direction and enhancing swept volume, cyclic waterflooding and gas-injection, etc. Here, directional wells include directional deflecting wells, lateral-drilling wells, lateral-drilling horizontal wells and horizontal wells. The results of this paper have been used in exploration and development of Shengli oilfield, and have achieved great social and economic profit, especially in predicting distribution of complex faulted-block reservoir, remaining oil distribution during middle and late stage of development, and in EOR. Applying the achievement of fault-closure research, new hydrocarbon-bearing blocks are discovered in flanks of Dongying central uplift and in complex blocks with proved reserves 15 million tons. With the study of remaining oil distribution law in complex faulted-block reservoirs, recovery factors are increased greatly in Dongxin, Xianhe and Linpan complex faulted-block reservoirs and accumulated oil production increment is 3 million tons.

濮城油田沙三中6-10高分辨率层序地层学研究

The foundation of reservoir model and residual oil prediction have been the core of reservoir detailed description for improved oil production and enhanced oil recovery. The traditional way of sandstone correlation based on the geometrical similarity of well-logs which emphasizes "based on the cycle and correlating from larger to smaller" has shown its theoretical limits when explaining the correlating and the scale, geometry, continuity, connectivity of sandstones and the law of the reservoir property. It has been an urgent and difficult subject to find new theory and methods to solve the reservoir correlation and property prediction. It's a new way to correlate strata and found framework of reservoir through the process-response analysis in the base-level cycles. And it is also possible to analyze the reservoir property in reservoir framework. Taking the reservoir of zonation 6-10 in S3~2 of Pucheng Oil Field in Henan Province as an example, we founded the detailed reservoir stratigraphic framework through base-level correlation. In the strata frame, sediment distribution and its development are discussed based on sediment volume partitioning and facies differentiation analysis. Reservoir heterogeneities and its relation to base-level are also discussed. The analysis of primary oil distribution shows the base-level controlled oil distribution in reservoir. In this paper, subjects as following are discussed in detail. Based on the analysis of sedimentary structure and sedimentary energy, the facies model was founded. Founding stratigraphy framework through base level analysis In the studying zone, one long term cycle, 6 middle term cycles and 27 short term cycles was identified and correlated. 3 Predicting the property of reservoir for improving oil development The base level controlled the property of sandbody. The short and very short term cycle controlled the pattern of heterogeneities in sandbody, and the middle and long term cycle controlled the area and inter-layer heterogeneities. On the lower location of the middle and long term base level, the sandbody is well developed, with a wide area and large thickness, while on the high location of base level, there is an opposite reservoir character. 4 The studying of reservoir development response and oil distribution making a solid base for development adjustment Primary oil distribution is controlled by base level location. It tells that the sandbody on the high base level location was poor developed for its difficulty to develop. While on the low location of the base level, the sandbody is well developed for its relative easy to develop and dominant role in the development, but high residual oil for its high original oil content.