Trabajo infantil y problemas del comportamiento en menores trabajadores

Objetivo: Identificar la relación de los factores de riesgo ocupacional del trabajo infantil con los problemas de comportamiento en menores de edad trabajadores de una plaza de mercado en Colombia Materiales y métodos: Se realizó un estudio de corte transversal con 100 niños trabajadores de la plaza de Mercaneiva. Se aplicó un cuestionario para evaluar los factores ocupacionales en la población, evaluando aspectos sociodemográficos y condiciones laborales; para establecer la prevalencia de los problemas del comportamiento se utilizó el cuestionario sobre el comportamiento de niños niñas de 6-18 años (CBCL- 01). El análisis de los datos se realizó mediante SPSS versión 26, con un análisis estadístico cualitativo por medio de proporciones y tablas de frecuencia, se usaron además medidas de tendencia central y dispersión. Se hizo un análisis bivariado entre los problemas de comportamiento y los factores ocupacionales utilizando el coeficiente de Spearman. Resultados: Se determinaron 3 parámetros relacionados entre los factores ocupacionales y los problemas de conductas que fueron la edad mínima de admisión al empleo (8.2 ± 2.5 años, med=8), las extensas jornadas de trabajo (7.2 ± 3.1, med=7) y los años que lleva laborando (4.5± 2.6 años med=4). Los niños mostraron una diferencias significativa en los problemas de comportamiento (26.3± 9.9) más que las niñas (23.9±9.3) (p=0.023) y respecto a las conductas externalizadas fue mayor en el género masculino (p=0.001). El resultado de la prevalencia de los problemas de comportamiento demostró que el rango clínico se correlacionó significativamente con el comportamiento general (conductas internalizadas r= 0.735, p<0.001; conductas externalizadas r= 0.693, p<0.001; otros problemas r= 0.729, p<0.001) al hallar que el 76.0% de menores trabajadores están en un rango clínico. Conclusión: El empezar a trabajar a una edad temprana es un riesgo para presentar problemas de conducta. Los entes gubernamentales deben ser más activos y apropiarse de su rol para el restablecimiento de derechos y actuar en los resultados hallados en la investigación para que se continúe monitoreando mediante más estudios e intervenciones.

Relación entre estrés y desórdenes músculo esqueléticos en trabajadores de una empresa de transporte terrestre de pasajeros, Bogotá, 2015.

Introducción. Los conductores de transporte terrestre de pasajeros están expuestos a factores de riesgo inherentes a su labor, por lo que la intervención sobre estos factores es un aspecto relevante en las empresas de transporte público dado que dicha actividad afecta la calidad de vida de los mismos. Objetivo: Determinar la prevalencia de estrés en el lugar de trabajo y los factores de riesgo biomecánicos asociados en trabajadores de una empresa de transporte terrestre de pasajeros. Materiales y métodos: Estudio de corte transversal con datos secundarios procedentes de una población de 219 empleados, de los cuales 13 eran administrativos y 206 laboraban en la operación de una empresa de transporte terrestre de pasajeros. Las variables incluidas fueron socio demográficas, laborales, variables relacionadas con la medición de estrés y síntomas osteomusculares. El análisis estadístico incluyó medidas de tendencia central y dispersión y para identificar los factores asociados con el estrés se utilizaron pruebas de asociación Chi2 y prueba exacta de Fisher. Resultados: La edad promedio de los participantes fue de 43 años (DS 10 años), siendo en su mayoría trabajadores de sexo masculino (96,3%). Se presentaron síntomas y factores de riesgo biomecánicos en cuello y espalda en un 55.5%. Se encontró asociación significativa entre estrés con los síntomas en pies (p=0,009), con los factores de riesgo biomecánicos, se encontró relación significativa con el tiempo que permanece adoptando las posturas de inclinación hacia delante (p=0,000) y hacia atrás (p=0,001) de espalda/tronco y las posturas en muñecas, (p=0,000), y a la exposición de los conductores a superficies vibrantes (asientos de vehículo) (p=0,021). No se encontró asociación significativa entre estrés y la postura de sedente. Conclusiones: Con este estudio se encontró una prevalencia de estrés de 78% en el lugar de trabajo y de los factores de riesgo biomecánicos asociados a antigüedad, postura y repetitividad de movimientos, con repercusiones en cuello y espalda lumbar, por lo tanto, se requiere de un seguimiento a las condiciones de salud y trabajo para los empleados del sector transporte.

The design of hazard risk assessment matrices for ranking occupational health risks and their application in mining and minerals processing

Two hazard risk assessment matrices for the ranking of occupational health risks are described. The qualitative matrix uses qualitative measures of probability and consequence to determine risk assessment codes for hazard-disease combinations. A walk-through survey of an underground metalliferous mine and concentrator is used to demonstrate how the qualitative matrix can be applied to determine priorities for the control of occupational health hazards. The semi-quantitative matrix uses attributable risk as a quantitative measure of probability and uses qualitative measures of consequence. A practical application of this matrix is the determination of occupational health priorities using existing epidemiological studies. Calculated attributable risks from epidemiological studies of hazard-disease combinations in mining and minerals processing are used as examples. These historic response data do not reflect the risks associated with current exposures. A method using current exposure data, known exposure-response relationships and the semi-quantitative matrix is proposed for more accurate and current risk rankings.

Il/legitimate risks? Occupational health and safety and the public in Britain, c. 1960-2015

The last 20 years have seen the emergence of a popular climate of antipathy towards occupational health and safety regulation within the UK, particularly within the mainstream British media. The governance of health and safety has thus in recent years become an increasingly visible and contested public and political issue. The extent of this contestation, and its impact on the State’s governance of health and safety in the workplace and beyond, is explained and historicized within this chapter. Why has public rhetoric about health and safety apparently become so important in framing the ways in which the State could legitimately act in recent years? The chapter demonstrates how since 1960 the State remained a significant player – one among many, admittedly – and that while its roles in managing health and safety had long been bounded by a number of factors, a variable that emerged with particular saliency over the last 20 years has been a mediated notion of ‘public opinion’. This focus serves to remind us of the ways in which State action has at certain moments been pushed in particular directions by factors beyond formal mechanisms of rule.

Global, regional, and national comparative risk assessment of 79 behavioural, environmental and occupational, and metabolic risks or clusters of risks in 188 countries, 1990-2013 : a systematic analysis for the Global Burden of Disease Study 2013

Global, regional, and national comparative risk assessment of 79 behavioral, environmental and occupational, and metabolic risks or clusters of risks, 1990–2015 : a systematic analysis for the Global Burden of Disease Study 2015

Occupational Health Risks for Interpreters: Exploring an Unchartered Field

Interpreting involves occupational health risks that can affect interpreters’ health both on the physiological and psychological level. The aim of this study is to raise awareness about occupational health risks for interpreters and the importance of protecting interpreter’s health. In interpreting studies health risks are usually discussed with regard to professional interpreting and according to the traditional distinctions between signed and spoken language, interpreting modes and settings. This exploratory study is an attempt to gather a body of knowledge on occupational health risks for interpreters and possible remedies independently of professional status and the above-mentioned distinctions. This was done by means of a review of relevant interpreting literature and the systematic exploration of materials produced or published by professional associations of interpreters, selected according to pre-defined criteria. The results were organised into macro-categories of occupational health risks and the items retrieved from the selected materials were inserted in a database.

The calculation of accident risks in fitness for work assessments: diseases that can cause sudden incapacity

Risk equations have been developed to assist in determining fitness for work of people with diseases that may cause rapid loss of control. The four equations calculate the frequency of fatal injury to the person with the disease, the frequency of fatal injury to colleagues in the workplace, and the cost of fatal injury and property damage to the employer, it is suggested that the additional risk of fatal injury to the person with the disease should not exceed the fatal injury rate in high-risk industries such as forestry, fishing and mining. it is also suggested that the additional risk of fatal injury to each colleague should be no more than one-tenth of the fatal injury rate due to motor vehicle accidents in the community. Two hypothetical case examples are given, demonstrating the use of the equations. The equations highlight the need to examine the risks associated with individuals, their specific jobs and their workplaces. They also highlight significant uncertainties in the determination of fitness, which perhaps have been underestimated in the past. Wherever possible, redundant defences should be utilized to prevent accidents in the event of sudden incapacity.

An EM-based Semi-Parametric Mixture Model Approach to the Regression Analysis of Competing-Risks Data

We consider a mixture model approach to the regression analysis of competing-risks data. Attention is focused on inference concerning the effects of factors on both the probability of occurrence and the hazard rate conditional on each of the failure types. These two quantities are specified in the mixture model using the logistic model and the proportional hazards model, respectively. We propose a semi-parametric mixture method to estimate the logistic and regression coefficients jointly, whereby the component-baseline hazard functions are completely unspecified. Estimation is based on maximum likelihood on the basis of the full likelihood, implemented via an expectation-conditional maximization (ECM) algorithm. Simulation studies are performed to compare the performance of the proposed semi-parametric method with a fully parametric mixture approach. The results show that when the component-baseline hazard is monotonic increasing, the semi-parametric and fully parametric mixture approaches are comparable for mildly and moderately censored samples. When the component-baseline hazard is not monotonic increasing, the semi-parametric method consistently provides less biased estimates than a fully parametric approach and is comparable in efficiency in the estimation of the parameters for all levels of censoring. The methods are illustrated using a real data set of prostate cancer patients treated with different dosages of the drug diethylstilbestrol. Copyright (C) 2003 John Wiley Sons, Ltd.

Economic analysis of occupational risk prevention: a case study in a textile company

Work accidents affect business and society as a whole. Fewer accidents mean fewer sick leaves, which results in lower costs and less disruption in the production process, with clear advantages for the employer. But workers and their households bear also a significant burden following a work accident, only partially compen-sated by insurance systems. Furthermore, the consequences of work accidents to the State and Society need also to be considered. When an organization performs an integrated risk analysis in evaluating its Occupational Health and Safety Management System, several steps are suggested to address the identified risk situations. Namely, to avoid risks, a series of preventive measures are identified. The organization should make a detailed analysis of the monetary impact (positive or negative) for the organization of each of the measures considered. Particularly, it is also important to consider the impact of each measure on society, involving an adequate eco-nomic cost-benefit analysis. In the present paper, a case study in a textile finishing company is presented. The study concentrates on the dyeing and printing sections. For each of the potential risks, several preventive measures have been identified and the corresponding costs and benefits have been estimated. Subsequently, the Benefit/Cost ratio (B/C) of these measures has been calculated, both in financial terms (from the organisa-tion’s perspective) and in economic terms (including the benefits for the worker and for the Society). Results show that, while the financial analysis in terms of the company does not justify the preventive measures, when the externalities are taken into account, the B/C ratio increases significantly and investments are fully justified.

Developments regarding the integration of the occupational safety and health with quality and environment management systems

Nanotechnology is the manipulation of matter on na almost atomic scale to produce new structures, materials, and devices. As potential occupational exposure to nanomaterials (NMs) becomes more prevalente, it is importante that the principles of medical surveillance and risk management be considered for workers in the nanotechnology industry.However, much information about health risk is beyond our current knowledge. Thus, NMs presente new challenges to understanding, predicting, andmanageing potential health risks. First, we briefly describe some general features of NMs and list the most importante types of NMs. This review discusses the toxicological potential of NMs by comparing possible injury mechanism and know, or potentially adverse, health effects. We review the limited research to date for occupational exposure to these particles and how a worker might be exposed to NMs. The principles of medical surveillance are reviewed to further the discussion of occupational health surveillance are reviewed to further the discussion of occupational health surveillance for workers exposed to NMs. We outlinehow occupational health professionals could contribute to a better knowledge of health effects by the utilization of a health surveillance program and by minimizing exposure. Finally, we discuss the early steps towards regulation and the difficulties facing regulators in controlling potentially harmful exposures in the absence of suficiente scientific evidence.

Integration of risk management in occupational health and safety systems

Risk management can be considered as part of the Occupational Health and Safety System (OHS) of an organization and can be used to develop and implement the OHS policy and manage the associated risks. The success of the integration of risk management in OHS depends on both technical and human aspects. Thus, this paper presents and discusses the case of a company working in the area of solid waste treatment. This company was certified in 2009 with an Integrated Management Systems for Quality, Environment, Occupational Health and Safety. The evolution of accidents before and after the implementation of the integrated system was analysed and a questionnaire was used to capture the perceptions of the technicians on the risk management system. The analysis of the findings showed that the frequency of accidents increased since 2009 but the severity has been reduced. Several interrelated causes and consequences were analysed and discussed. Furthermore, the analysis of the opinions of the company’s technicians permitted to highlight some important aspects on the integration of risk management in the OHS system of the company. In line with this discussion some hypothesis have been formulated.

Economic evaluation of occupational safety preventive measures in a hospital

BACKGROUND: When an organization performs an integrated analysis of risks through its Occupational Health and Safety Management System, several steps are suggested to address the implications of the identified risks. Namely, the organization should make a detailed analysis of the monetary impact for the organization of each of the preventive measures considered. However, it is also important to perform an analysis of the impact of each measure on society (externalities). OBJECTIVE: The aim of this paper is to present a case study related to the application of the proposed economic evaluation methodology. METHODS: An analysis of the work accidents in a hospital has been made. Three of the major types of accidents have been selected: needle stings, falls and excessive strain. Following the risk assessment, some preventive measures have been designed. Subsequently, the Benefit/Cost ratio (B/C) of these measures has been calculated, both in financial terms (from the organization’s perspective) and in economic terms (including the benefits for the worker and for the Society). RESULTS: While the financial ratio is only advantageous in some cases, when the externalities are taken into account, the B/C ratio increases significantly. CONCLUSIONS: It is important to consider external benefits to make decisions concerning the implementation of preventive measures in Occupational Health and Safety projects

Evaluation of risks at MANTEM

International statistics show that the problem of the accidents at work is far away to be solved (ILO estimates that every year about 270 million work accidents and 160 million occupational diseases resulting in the death of more than 2 million workers occurs in the world). That's why the EU global goal concerning the community' strategy for occupational health and safety for 2007-2012 is to reduce in 25% the incidence rate of occupational accidents and diseases. In this prospect it is presented a case study which justify the need to develop studies in Safety, Hygiene and Health at Work area as a way to encourage the managers to implement preventive actions and strategies, besides meeting the legal requirements, in order to reduce the occurrence of work accidents, improve the work conditions and therefore obtain benefits in added values and reinforced competition. The general objective of this study is to describe the work situations, identify the dangers and associate the potential risks and consequences; evaluate and value the risk. The study uses the Failure Table methodology and, in the business area of an organization which will be from now on designated as MANTEM that works in the electromechanical maintenance area. The results were, amongst others, some actions to be implemented to eliminate/minimize risks.