MDD vs. traditional software development: a practitioner’s subjective perspective

Context: Today’s project managers have a myriad of methods to choose from for the development of software applications. However, they lack empirical data about the character of these methods in terms of usefulness, ease of use or compatibility, all of these being relevant variables to assess the developer’s intention to use them. Objective: To compare three methods, each following a different paradigm (Model-Driven, Model-Based and Code-Centric) with respect to their adoption potential by junior software developers engaged in the development of the business layer of a Web 2.0 application. Method: We have conducted a quasi-experiment with 26 graduate students of the University of Alicante. The application developed was a Social Network, which was organized around a fixed set of modules. Three of them, similar in complexity, were used for the experiment. Subjects were asked to use a different method for each module, and then to answer a questionnaire that gathered their perceptions during such use. Results: The results show that the Model-Driven method is regarded as the most useful, although it is also considered the least compatible with previous developers’ experiences. They also show that junior software developers feel comfortable with the use of models, and that they are likely to use them if the models are accompanied by a Model-Driven development environment. Conclusions: Despite their relatively low level of compatibility, Model-Driven development methods seem to show a great potential for adoption. That said, however, further experimentation is needed to make it possible to generalize the results to a different population, different methods, other languages and tools, different domains or different application sizes.

Model-Driven safety evaluation with state-event-based component failure annotations

Over the past years, the paradigm of component-based software engineering has been established in the construction of complex mission-critical systems. Due to this trend, there is a practical need for techniques that evaluate critical properties (such as safety, reliability, availability or performance) of these systems. In this paper, we review several high-level techniques for the evaluation of safety properties for component-based systems and we propose a new evaluation model (State Event Fault Trees) that extends safety analysis towards a lower abstraction level. This model possesses a state-event semantics and strong encapsulation, which is especially useful for the evaluation of component-based software systems. Finally, we compare the techniques and give suggestions for their combined usage

Model driven distribution of collaborative business processes

In this paper, we present a top down approach for integrated process modelling and distributed process execution. The integrated process model can be utilized for global monitoring and visualization and distributed process models for local execution. Our main focus in this paper is the presentation of the approach to support automatic generation and linking of distributed process models from an integrated process definition.

The relationship between extra-role behaviours and job burnout for primary school teachers: A preliminary model and development of an organisational citizenship behaviour scale

Recent research on teacher stress in primary schools (e.g. Leonard, Bourke & Schofield, 1999) has shown that higher levels of teacher exhaustion are associated with higher levels of student satisfaction. This paper seeks to explain this surprising finding by considering a construct discussed widely in the organisational literature known as extra-role or organisational citizenship behaviour (OCB). Teacher OCB may include extra efforts to make lessons enjoyable and interesting, organising extra-curricular activities and spending personal time talking with students. The proposed model of analysis also draws on literature relating to job burnout (Maslach, 1982), which generally suggests that the three components of chronic occupational stress - exhaustion, depersonalisation and reduced accomplishment - occur together. However, this paper proposes that although teachers who engage in more OCB experience more exhaustion, they may simultaneously increase their feelings of personal accomplishment and work identification, which may in turn help to avert burnout. It is argued that only with this particular set of job attitudes are the effects of exhaustion caused by high levels of OCB sufficiently buffered to avoid job burnout, and thus positively affect students' quality of school life. The development and piloting of an instrument to measure teachers' OCB will be discussed. The preliminary findings reported herein are part of a larger ongoing study investigating the consequences of stress and OCB in primary school teachers.

An aspect-oriented and model-driven approach for managing dynamic variability

Constructing and executing distributed systems that can adapt to their operating context in order to sustain provided services and the service qualities are complex tasks. Managing adaptation of multiple, interacting services is particularly difficult since these services tend to be distributed across the system, interdependent and sometimes tangled with other services. Furthermore, the exponential growth of the number of potential system configurations derived from the variabilities of each service need to be handled. Current practices of writing low-level reconfiguration scripts as part of the system code to handle run time adaptation are both error prone and time consuming and make adaptive systems difficult to validate and evolve. In this paper, we propose to combine model driven and aspect oriented techniques to better cope with the complexities of adaptive systems construction and execution, and to handle the problem of exponential growth of the number of possible configurations. Combining these techniques allows us to use high level domain abstractions, simplify the representation of variants and limit the problem pertaining to the combinatorial explosion of possible configurations. In our approach we also use models at runtime to generate the adaptation logic by comparing the current configuration of the system to a composed model representing the configuration we want to reach. © 2008 Springer-Verlag Berlin Heidelberg.

Model-driven software adaptation:report on the workshop M-ADAPT at ECOOP 2007

This first edition of the workshop Model-driven Software Adaptation (M-ADAPT'07) took place in the Technische Universität Berlin with the International Conference ECOOP'07 in the beautiful and buzzing city of Berlin, on the 30th of July, 2007. The workshop was organized by Gordon Blair, Nelly Bencomo, and Robert France. Participants explored how to develop appropriate model-driven approaches to model, analyze, and validate the volatile properties of the behaviour of adaptive systems and its environments. This report gives an overview of the presentations as well as an account of the fruitful discussions that took place at M-ADAPT'07. © 2008 Springer-Verlag Berlin Heidelberg.

Run-time model evaluation for requirements model-driven self-adaptation

A self-adaptive system adjusts its configuration to tolerate changes in its operating environment. To date, requirements modeling methodologies for self-adaptive systems have necessitated analysis of all potential system configurations, and the circumstances under which each is to be adopted. We argue that, by explicitly capturing and modelling uncertainty in the operating environment, and by verifying and analysing this model at runtime, it is possible for a system to adapt to tolerate some conditions that were not fully considered at design time. We showcase in this paper our tools and research results. © 2012 IEEE.

Form follows function:model-driven engineering for clinical trials

We argue that, for certain constrained domains, elaborate model transformation technologies-implemented from scratch in general-purpose programming languages-are unnecessary for model-driven engineering; instead, lightweight configuration of commercial off-the-shelf productivity tools suffices. In particular, in the CancerGrid project, we have been developing model-driven techniques for the generation of software tools to support clinical trials. A domain metamodel captures the community's best practice in trial design. A scientist authors a trial protocol, modelling their trial by instantiating the metamodel; customized software artifacts to support trial execution are generated automatically from the scientist's model. The metamodel is expressed as an XML Schema, in such a way that it can be instantiated by completing a form to generate a conformant XML document. The same process works at a second level for trial execution: among the artifacts generated from the protocol are models of the data to be collected, and the clinician conducting the trial instantiates such models in reporting observations-again by completing a form to create a conformant XML document, representing the data gathered during that observation. Simple standard form management tools are all that is needed. Our approach is applicable to a wide variety of information-modelling domains: not just clinical trials, but also electronic public sector computing, customer relationship management, document workflow, and so on. © 2012 Springer-Verlag.

A Simple Model Describes Development of Early Peaks in Oomycete Zoospore Inoculum Detected in Southern UK Outdoors Horticultural Reservoirs

The numbers of water-borne oomycete propagules in outdoor reservoirs used in horticultural nurseries within the UK are investigated in this study. Water samples were recovered from 11 different horticultural nurseries in the southern UK during Jan-May in two ‘cool’ years (2010.and 2013; winter temperatures 2.0 and 0.4oC below UK Met Office 30 year winter average respectively) and two ‘warm’ years (2008 and 2012; winter temperatures 1.2 and 0.9oC above UK Met Office 30 year winter average respectively). Samples were analysed for total number of oomycete colony forming units (CFU), predominantly members of the families Saprolegniaceae and Pythiaceae, and these were combined to give monthly mean counts. The numbers of CFU were investigated with respect to prevailing climate in the region: mean monthly air temperatures calculated by using daily observations from the nearest climatological station. The investigations show that the number of CFU during spring can be explained by a linear first-order equation and a statistically significant r2 value of 0.66 with the simple relationship: [CFU] = a(T-Tb )-b, where a is the rate of inoculum development with temperature T, and b is the baseload population at temperatures below Tb. Despite the majority of oomycete CFU detected being non-phytopathogenic members of the Saprolegniaceae, total oomycete CFU counts are still of considerable value as indicators of irrigation water treatment efficacy and cleanliness of storage tanks. The presence/absence of Pythium spp. was also determined for all samples tested, and Pythium CFU were found to be present in the majority, the exceptions all being particularly cold months (January and February 2010 and January 2008). A simple scenario study (+2 deg C) suggests that abundance of water-borne oomycetes during spring could be affected by increased temperatures due to climate change.

Evolution feature oriented model driven product line engineering approach for synergistic and dynamic service evolution in clouds: A04BPEL3.0 proposal.

Model Driven based approach for Service Evolution in Clouds will mainly focus on the reusable evolution patterns' advantage to solve evolution problems. During the process, evolution pattern will be driven by MDA models to pattern aspects. Weaving the aspects into service based process by using Aspect-Oriented extended BPEL engine at runtime will be the dynamic feature of the evolution.

Designing of Portlet-basedWeb Portals

166 p.

一种模型驱动的交互式信息可视化开发方法

设计与实现面向领域应用的交互式信息可视化软件十分困难．缺乏统一的开发方法与支撑工具箱，为非专家用户提供对层次、网络、多维等数据类型的统一支持，对各种可视化技术与交互技术的统一支持，以及对信息可视化任务的统一支持．针对此问题，提出了一种模型驱动的交互式信息可视化开发方法Daisy．首先，提出了交互式信息可视化界面模型IIVM（interactive information visualization interface model）；然后，提出了基于IIVM的交互式信息可视化开发方法Daisy,讨论了该方法的两个核心技术：IIVM建模与描述文件生成方法、系统自动生成方法．同时，给出了Daisy工具箱，包括Daisy建模工具、Daisy系统自动生成工具以及运行时框架与组件库．最后，给出了该开发方法与工具箱的应用实例．实例表明，该方法能够为交互式信息可视化开发的统一支撑方法问题提供一种有效的解决方案．

Automatização de testes à framework myMIS

Atualmente, verifica-se um aumento na necessidade de software feito à medida do cliente, que se consiga adaptar de forma rápida as constantes mudanças da sua área de negócio. Cada cliente tem os seus problemas concretos que precisa de resolver, não lhe sendo muitas vezes possível dispensar uma elevada quantidade de recursos para atingir os fins pretendidos. De forma a dar resposta a estes problemas surgiram várias arquiteturas e metodologias de desenvolvimento de software, que permitem o desenvolvimento ágil de aplicações altamente configuráveis, que podem ser personalizadas por qualquer utilizador das mesmas. Este dinamismo, trazido para as aplicações sobre a forma de modelos que são personalizados pelos utilizadores e interpretados por uma plataforma genérica, cria maiores desafios no momento de realizar testes, visto existir um número de variáveis consideravelmente maior que numa aplicação com uma arquitetura tradicional. É necessário, em todos os momentos, garantir a integridade de todos os modelos, bem como da plataforma responsável pela sua interpretação, sem ser necessário o desenvolvimento constante de aplicações para suportar os testes sobre os diferentes modelos. Esta tese debruça-se sobre uma aplicação, a plataforma myMIS, que permite a interpretação de modelos orientados à gestão, escritos numa linguagem específica de domínio, sendo realizada a avaliação do estado atual e definida uma proposta de práticas de testes a aplicar no desenvolvimento da mesma. A proposta resultante desta tese permitiu verificar que, apesar das dificuldades inerentes à arquitetura da aplicação, o desenvolvimento de testes de uma forma genérica é possível, podendo as mesmas lógicas ser utilizadas para o teste de diversos modelos distintos.