Production of an axial piston: Impacts resulting from the substitution of steel by a polymer-based material

The substitution of steel as a raw material in the production of axial pistons for pressure washers by polyphthalamide, polytetrafluoroethylene and glass fiber-based composite was studied. The new production process with composite consists of only two steps, while the production of the steel piston is to comprise of thirteen steps. This replacement would result in an estimated reduction of 80% of water consumption, 83% of electricity consumption, 73% of the total cost and 88% of the final mass. With regard to the main mechanical properties required for the end product, the composite was found to withstand the critical axial loads and it shows acceptable wear resistance in an environment without lubrication, an additional advantage of this replacement. © 2012 Elsevier Ltd. All rights reserved.

Gestão de óleos e gorduras residuais de fritura em Campinas, SP

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Estratégia de competição empresarial na construção civil paraense da Copala Industrias Reunidas S/A

Esta dissertação baseia-se na análise da estratégia competitiva adotada no mercado de vergalhões de aço para construção civil em Belém, capital do Estado do Pará, pela Copala Indústrias Reunidas S/A. Existe então o interesse de avaliar as possibilidades da empresa no sentido de permanecer atuando com êxito no setor, em que pese a concorrência exercida por siderúrgicas de grande porte, cujos interesses são da abrangência nacional e internacional. Foram realizadas pesquisas considerando-se o mercado de aço para construção civil de um modo amplo, sendo consultados construtores, comerciantes e consumidores desse material. Outrossim, a própria Copala foi objeto de avaliação no que se refere a sua atuação tanto como adquirente de insumos para fabricação de aço, quanto como produtora e vendedora do produto.

Placas cerâmicas para revestimento de baixa absorção de água e estabilidade dimensional confeccionadas por moagem a seco usando o material da formação Corumbataí

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

A mão-de-obra da indústria pesqueira na Amazônia

O setor pesqueiro tem grande importância em termos de geração de emprego e renda para a Amazônia, sendo a atividade de pesca comercial e de subsistência a maior fonte geradora de empregos do setor e a indústria pesqueira a grande fonte geradora de renda. Contudo, a indústria pesqueira na Amazônia apresenta diversas dificuldades em relação ao abastecimento de matéria-prima e treinamento da mão-deobra. A sazonalidade das espécies influencia o sistema produtivo das empresas que mantém seu quadro funcional variando devido a safra das espécies comerciais. Esta dinâmica do setor faz com que algumas empresas de pescado adotem sistemas rotativos, contratando funcionários na safra e demitindo-os na entressafra, enquanto que outras adotam o sistema de banco de horas, mantendo o quadro fixo de funcionários e compensando as horas trabalhadas a mais no período da safra por horas não trabalhadas no período da entressafra. Em razão desta sazonalidade, em geral, as empresas de pescado apresentam funcionários com baixa qualificação e com difícil adequação aos padrões de higiene. A instabilidade do emprego por outro lado, desestimula o funcionário ao treinamento. Manter o quadro fixo de empregados é política de algumas empresas. Essas apresentam menor desperdício de matéria-prima, maior rendimento do empregado, funcionários mais treinados e adaptados aos padrões de higiene exigidos. Contudo, a contratação de empregados permanentes exige que a empresa tenha uma estratégia mais ampla para o abastecimento de pescado na entressafra de forma que seja possível manter a mão-de-obra contratada nesse período.

Otimização e caracterização microestrutural de cerâmicas de carbeto de silício obtidas com material nacional para uso em blindagem balística

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Transformações no espaço rural do norte pioneiro paranaense: estratégias de resistência e/ou permanência dos agricultores familiares no município de Jacarezinho/PR

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Análise microbiológica e físico-química de material proteico comestível derivado do processamento da gordura oriunda do abate de bovinos

Background: The use of all by-products of bovine slaughter is of high economic importance for the industries of products of animal origin. Among these products, fat has an important role, once fat rendering may generate several different products, such as protein material that may be used in the manufacture of meat products. However, in spite of the importance that the use of all by-products has for the economic balance of the industry, there are no reports on their use in Brazil, or studies that supply data on microbiological and physical-chemical local standards for this protein. Thus, the objective of this study was to evaluate microbiological and physical-chemical characteristics of protein material obtained from fat rendering, as well as to provide support for companies to use fat rendering to generate protein material, adding value to industrialized meat products.Materials, Methods & Results: The experimental production of edible protein obtained of fat rendering was conducted in slaughterhouse with supervision of the Brazilian Ministry of Agriculture, Livestock and Food Supply. Protein material was obtained in a continuous, humid heat system at high temperatures. Fat scraps containing protein were ground and cooked at high temperature (85 degrees C), and placed in a three phase decanter centrifuge. After centrifugation, protein material was ground again and packed. Samples were collected from 15 batches of protein material, and the following microbiological analyses were carried out: counts of aerobic mesophilic and psychrotrophic microorganisms, coliforms at 35 degrees C, Escherichia coli, sulfite-reducing Clostridium, and Staphylococcus aureus, besides presence or absence of Salmonella and Listeria monocytogens. The following physical-chemical analyses were also carried out: protein, total lipid, moisture, ash, carbohydrate, and energy content. Mean counts of mesophiles, psychrotrophs, and coliforms at 35 degrees C were 4.17; 3.69 and 1.87 (log CFU/g), respectively. Levels of protein, total lipids, moisture, ashes and carbohydrates were 27.50; 7.83; 63.88%; 0.24%; and 0.55%, respectively, and energy content was 182.63 kcal/100g.Discussion: Results of microbiological analyses demonstrated that, although low, the final product showed to be contaminated. Contamination that occurred during the second grinding procedure may be an explanation for these bacterial counts. Also, the temperature used for fat fusion was not enough to eliminate thermoduric microorganisms. However, even with the presence of indicator microorganisms in the samples, none was contaminated by E. coli, sulfite-reducing Clostridium, S. aureus, Salmonella or L. monocytogenes. Physical-chemical analyses showed that the product had adequate nutritional quality. Based on these results, it was possible to conclude that protein material obtained in fat rendering showed characteristics that enable the use of this product as raw material for processed meat products. Besides, the present study was the first one to present scientific results in relation to edible by-products obtained in fat rendering, supplying important information for slaughterhouses and meat-processing plants. The study also produced relevant data on the innocuousness of the product, which may be used to guide decision-making of health inspectors.

Quantifying Isotibolone in Raw Materials of Tibolone

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Análise proteômica do plasma sanguíneo e crioprecipitado de búfalos Bubalus Bubalis

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Da margem ao centro dos holofotes: o arcabouço legal dos/as catadores/as de material reiclável e reutilizável

Pós-graduação em Serviço Social - FCHS

Bamboo as sustainable material used in design and civil construction: species, management, characterization and applications

The use of bamboo as construction and raw material for producing products can be considered a feasible alternative to the abusive use of steel, concrete and oil byproducts. Its use can also reduce the pressure on the use of wood from native and planted forests. Although there are thousands of bamboo species spread about the world and Brazil itself has hundreds of native species, the use and basic knowledge of its characteristics and applications are still little known and little disseminated. This paper's main objective is to introduce the species, the management phases, the physical and mechanical characteristics and the experiences in using bamboo in design and civil construction as per the Bamboo Project implemented at UNESP, Bauru campus since 1994. The results are divided into: a) Field activities - description of the technological species of interest, production chain flows, types of preservative treatments and clump management practices for the development, adaptation and production of different species of culms; b) Lab experiments - physical and mechanical characterization of culms processed as laminated strips and as composite material (glue laminated bamboo – glubam); c) Uses in projects - experiences with natural bamboo and glubam in design, architecture and civil construction projects. In the final remarks, the study aims to demonstrate, through practical and laboratory results, the material's multi-functionality and the feasibility in using bamboo as a sustainable material.

Grupo de apoiadores e cooperlix em Presidente Prudente-SP, Brasil: modelo e evolução de suas relações durante quinze anos

Pós-graduação em Geografia - FCT

Das Paläolithikum der Magdalenahöhle bei Gerolstein

Die vorliegende Arbeit hat das von 1969 – 1972 ergrabene Inventar der Magdalenahöhle bei Gerolstein unter kritischer Berücksichtigung der Originaldokumentation sowie der stratigraphischen und sedimentologischen Beschreibungen erneut untersucht und v.a. hinsichtlich zweier Arbeitshypothesen überprüft. Daneben fanden jedoch auch die Schmuckobjekte und in kursorischer Weise die Tierknochen Betrachtung. Die Elfenbeinobjekte setzen sich aus elf Fragmenten zusammen, die bereits in zerbrochenem Zustand in die Höhle gelangt sein müssen. Sie sind mit mehreren Linienbündeln verziert, die teilweise aus v- oder zickzack-förmigen Motiven bestehen. Auch gestanzte Punktreihen treten auf. In ihrer Größe und Form sind die Elfenbeinobjekte einzigartig. Lediglich aus der Csákvár-Höhle in Ungarn gibt es vergleichbare Stücke, deren genaue Altersstellung jedoch unklar ist. Daneben kommen in der Magdalenahöhle zwei vollständige durchlochte Hirschgrandeln sowie die Fragmente einer durchlochten Grandel sowie eines durchlochten Wolfzahns vor. Diese tragen teilweise Spuren einer Aufhängung bzw. Befestigung. Der Grund für ihre Niederlegung vor Ort ist indes nicht endgültig zu klären. Die überlieferten Tierknochen besitzen verschiedene Grade von Verfärbung und Erhaltung, lassen sich dadurch jedoch nicht verschiedenen Schichten zuordnen. Neben Modifikationen von Carnivoren, darunter v.a. durch Verdauungsprozesse, sind auch an einigen Exemplaren Schnittspuren festgestellt worden. Eine Bärenphalange aus der Fundschicht b1 eröffnet so die Perspektive, die menschliche Belegung erneut mit der Radiokohlenstoffmethode direkt zu datieren. Der Untere paläolithische Fundhorizont besteht aus relativ unspezifischen Quarzartefakten, die von einer opportunistischen Abschlags- und Werkzeugsgewinnung aus lokalen Schottern zeugen. Für den Oberen paläolithischen Fundhorizont zeigt die Steinartefaktanalyse, dass die Abschläge als Herstellungsreste dünner bifazieller Geräte angesprochen werden können. Während dieser Befund alleine auch im Zusammenhang mit den spätmittelpaläolithischen Blattspitzengruppen gesehen werden kann, sprechen die bereits erwähnten vergesellschafteten Schmuckobjekte, der Nachweis eines Klingenabbaus sowie die fast ausschließliche Verwendung exogenen Rohmaterials für einen jungpaläolithischen Kontext, d.h. für eine Affinität zum Solutréen. Die Steinartefakte der Magdalenahöhle zeugen gleichzeitig von einer sehr mobilen Lebensweise, da lediglich eine Phase des Herstellungsprozesses des bifaziellen Geräts vor Ort stattgefunden hat. Gleichzeitig wurden früher an anderem Ort gewonnene Abschläge mitgebracht und als Werkzeug verwendet. Ebenso wie der Kern selbst wurden Abschläge auch wieder abtransportiert. Insgesamt kann daher eine Rohmaterial konservierende Strategie rekonstruiert werden, in der neben dem Kern als Gerät selbst auch die Abschläge Verwendung finden. Da die Magdalenahöhle als östlicher Niederschlag des Solutréen und als Beleg für das maximale Verbreitungsgebiet dieses Technokomplexes gewertet werden muss, reiht sie sich in eine Reihe von Fundstellen und Argumenten ein, wonach das zentrale Mitteleuropa während des LGM s.l. nicht menschenleer war, sondern in sporadischen Exkursionen begangen wurde. Obwohl sich daran noch keine dauerhafte Wiederbesiedlung anschloss, muss vom Bild einer absoluten Siedlungsleere Abstand genommen werden. Weitere Fundstellen und absolutchronologische Datierungen, u.a. der Magdalenahöhle, könnten in Zukunft zu einem noch besseren Verständnis der menschlichen Anpassungsstragien an kaltzeitliche Umwelten beitragen.

Enzyme engineering of aminotransferases for improved activity and thermostability

The production by biosynthesis of optically active amino acids and amines satisfies the pharmaceutical industry in its demand for chiral building blocks for the synthesis of various pharmaceuticals. Among several enzymatic methods that allow the synthesis of optically active aminoacids and amines, the use of minotransferase is a promising one due to its broad substrate specificity and no requirement for external cofactor regeneration. The synthesis of chiral compounds by aminotransferases can be done either by asymmetric synthesis starting from keto acids or ketones, and by kinetic resolution starting from racemic aminoacids or amines. The asymmetric synthesis of substituted (S)-aminotetralin, an active pharmaceutical ingredient (API), has shown to have two major factors that contribute to increasing the cost of production. These factors are the raw material cost of biocatalyst used to produce it and product loss during biocatalyst separation. To minimize the cost contribution of biocatalyst and to minimize the loss of product, two routes have been chosen in this research: 1. To engineer the aminotransferase biocatalyst to have greater specific activity, and 2. Improve the engineering of the process by immobilization of biocatalyst in calcium alginate and addition of cosolvents. An (S)-aminotransferase (Mutant CNB03-03) was immobilized, not as purified enzyme but as enzyme within spray dried cells, in calcium alginate beads and used to produce substituted (S)-aminotetralin at 50 °C and pH 7 in experiments where the immobilized biocatalyst was recycled. Initial rate of reaction for cycle 1 (6 hr duration) was determined to be 0.258 mM/min, for cycle 2 (20 hr duration) it decreased by ~50% compared to cycle 1, and for cycle 3 (20 hr duration) it decreased by ~90% compared to cycle 1 (immobilized preparation consisted of 50 mg of spray dried cells per gram of calcium alginate). Conversion to product for each cycle decreased as well, from 100% in cycle 1 (About 50 mM), 80% in cycle 2, and 30% after cycle 3. This mutant was determined to be deactivated at elevated temperatures during the reaction cycle and was not stable enough to allow multiple cycles in its immobilized form. A new mutant aminotransferase was isolated by applying error-prone polymerase chain reaction (PCR) on the gene coding for this enzyme and screening/selection: CNB04-01. This mutant showed a significant improvement in thermostability in comparison to CNB03-03. The new mutant was immobilized and tested under similar reaction conditions. Initial rate remained fairly constant (0.2 mM/min) over four cycles (each cycle with a duration of about 20 hours) with the mutant retaining almost 80% of initial rate in the fourth cycle. The final product concentrations after each cycle did not decrease during recycle experiments. Thermostability of CNB04-01 was much improved compared to CNB03-03. Under the same reaction conditions as stated above, the addition of co-solvents was studied in order to increase substituted tetralone solubility. Toluene and sodium dodecylsulfate (SDS) were used. SDS at 0.01% (w/v) allowed four recycles of the immobilized spray dried cells of CNB04-01, always reaching higher product concentration (80-85 mM) than the system with toluene at 3% (v/v) -70 mM-. The long term activity of immobilized CNB04-01 in a system with SDS 0.01% (w/v) at 50 °C, pH 7 was retained for three cycles (20 to 24 hours each one), reaching always final product concentration between 80-85 mM, but dropping precipitously in the fourth cycle to a final product concentration of 50 mM. Although significant improvement of immobilization on productivity and stability were observed using CNB04-01, another observation demonstrated the limitations of an immobilization strategy on reducing process costs. After analyzing the results of this experiment it was seen that a sudden drop occurred on final product concentration after the third recycle. This was due to product accumulation inside the immobilized preparation. In order to improve the economics of the process, research was focused on developing a free enzyme with an even higher activity, thus reducing raw material cost as well as improving biomass separation. A new enzyme was obtained (CNB05-01) using error-prone PCR and screening using as a template the gene derived from the previous improved enzyme. This mutant was determined to have 1.6 times the initial rate of CNB04-01 and had a higher temperature optimum (55°). This new enzyme would allow reducing enzyme loading in the reaction by five-fold compared to CNB03-03, when using it at concentration of one gram of spray dried cells per liter (completing the reaction after 20-24 hours). Also this mutant would allow reducing process time to 7-8 hours when used at a concentration of 5 grams of spray dried cells per liter compared to 24 hours for CNB03-03, assuming that the observations shown before are scalable. It could be possible to improve the economics of the process by either reducing enzyme concentration or reducing process time, since the production cost of the desired product is primarily a function of both enzyme concentration and process time.