CIGARETTE SMOKING AMONG HIGH SCHOOL STUDENTS IN RURAL AREAS OF THAILAND

The purpose of this study was to identify the smoking prevalence among high school students in rural areas of Thailand and the factors associated with their smoking habits. The sample population was comprised of 946 volunteer students of both sexes enrolled in the twelfth grade classes of the 1981-82 school year in randomly chosen regional public high schools throughout the country. Data were obtained from a formal self-administered questionnaire survey. The comparisons were treated by classified smoking habits as "non-smoker," "trier," "ex-smoker," and "smoker."^ The study presented the low rate of cigarette smoking habits among female students, compared to male students. Significant differences of smoking-related habits were found among those who had exemplar models for smoking habits; fathers, siblings and peers were their reference groups. Parental approval was found to be a significant factor associated with students' smoking habits. The awareness of health hazards, the perceptions of the influence of cigarette advertisement, and the attitudes toward the concerns of government in cigarette manufacturing were also factors associated with cigarette smoking habits of high school subjects. ^

The metallurgy of quicksilver,

First edition, May, 1925. cf. verso of t.-p.

Challenges to environmental toxicology and epidemiology: where do we stand and which way do we go?

Modern toxicology investigates a wide array of both old and new health hazards. Priority setting is needed to select agents for research from the plethora of exposure circumstances. The changing societies and a growing fraction of the aged have to be taken into consideration. A precise exposure assessment is of importance for risk estimation and regulation. Toxicology contributes to the exploration of pathomechanisms to specify the exposure metrics for risk estimation. Combined effects of co-existing agents are not yet sufficiently understood. Animal experiments allow a separate administration of agents which can not be disentangled by epidemiological means, but their value is limited for low exposure levels in many of today's settings. As an experimental science, toxicology has to keep pace with the rapidly growing knowledge about the language of the genome and the changing paradigms in cancer development. During the pioneer era of assembling a working draft of the human genome, toxicogenomics has been developed. Gene and pathway complexity have to be considered when investigating gene-environment interactions. For a best conduct of studies, modem toxicology needs a close liaison with many other disciplines like epidemiology and bioinformatics. (C) 2004 Elsevier Ireland Ltd. All rights reserved.

Sporicidal activity of two disinfectants against Clostridium difficile spores

The sporicidal activity of an odour-free peracetic acid-based disinfectant (Wofasteril®) and a widely-used dichloroisocyanurate preparation (Chlor-clean®) was assessed against spores of the hyper-virulent strain of Clostridium difficile (ribotype 027), in the presence and absence of organic matter. In environmentally clean conditions, dichloroisocyanurate achieved a >3 log10 reduction in 3 minutes, but a minimum contact time of 9 minutes was required to reduce the viable spore load to below detection levels. Peracetic acid achieved a >3 log10 reduction in 30 minutes and was overall significantly less effective (P<0.05). However, in the presence of organic matter - which reflects the true clinical environment - there was no significant difference between the sporicidal activity of dichloroisocyanurate and peracetic acid over a 60-minute period (P=0.188). Given the greater occupational health hazards generally associated with chlorine-releasing agents, odour-free peracetic acid-based disinfectants may offer a suitable alternative for environmental disinfection.

The formation and impact of hazard control policy:a study of the regulation of white lead paint in Britain

Government regulation of industrial hazards is examined in the context of the economic and technical processes of industrial development. Technical problems and costs of control are considered as factors in both the formation and impact of regulation. This thesis focuses on an historical case-study of the regulation of the hazard to painting workers from the use of lead pigments in paint. A regulatory strategy based on the prohibition of lead paints gained initial acceptance within the British state in 1911, but was subsequently rejected in favour of a strategy that allowed continued use of lead paint subject to hygiene precautions. The development of paint technology and its determinants, including concern about health hazards, are analysed, focusing on the innovation and diffusion into the paint industry of the major white pigments: white lead (PbC03 .PB(OH)2)and its substitutes. The process of regulatory development is examined, and the protracted and polarised regulatory d~bate contrasted to the prevailing 'consensual' methods of workplace regulation. The rejection of prohibition is analysed in terms of the different political and technical resources of those groups in conflict over this policy. This highlights the problems of consensus formation around such a strategy, and demonstrates certain constraints on state regulatory activity, particularly regarding industrial development. Member-states of the International Labour Organisation agreed to introduce partial prohibition of lead paint in 1921. Whether this was implemented is related to the economic importance of lead and non-lead metal and pigment industries to a nation. An analysis is made of the control of lead poisoning. The rate of control is related to the economic and technological trajectory of the regulated industry. Technical and organisational characteristics are considered as well as regulatory factors which range from voluntary compliance and informal pressures to direct legal requirements. The implications of this case-study for the analysis of the development and impacts of regulation are assessed.

Professional exposure to fungal pathogens: an update to exposure conditions and exposure measurement

In many occupational settings an exposure to fungi occurs. Fungal exposure may occur for instance in the form of dermatocytes, yeasts or mold. Associated to the fungi themselves an exposure to cell wall components like ß(1 ? 3)-D-glucans, to mycotoxins or to microbial volatile compounds can occur. Health hazards may differ across species because fungi may produce different allergens and mycotoxins, and some species can infect humans. Occupational settings are often characterized by special exposure conditions with respect to duration, frequency and especially to the level of exposure resulting at least sometimes to high or very high fungal exposure. Because of these special conditions occupational settings are suitable for epidemiologic studies. However, the knowledge about occupational exposure to fungi and associated compounds like mycotoxins is still fragmentary and not well disseminated. An indication for a high fungal exposure is for instance the handling of dry natural products like grain, hay or herbal plants with a high specific surface and the tendency to release dust during handling. The fungal components often form the determinative part of such dusts and might be a vehicle to respiratory airways. The authors will present results of exposure measurements of occupational settings and exposure conditions which are only rarely investigated.

Exposure and risk assessment in occupational exposure to fungi: aspects to consider in highly contaminated settings

Although a clear correlation between levels of fungi in the air and health impacts has not been shown in epidemiological studies, fungi must be regarded as potential occupational health hazards. Fungi can have an impact on human health in four different ways: (1) they can infect humans, (2) they may act as allergens, (3) they can be toxigenic, or (4) they may cause inflammatory reactions. Fungi of concern in occupational hygiene are mostly non-pathogenic or facultative pathogenic (opportunistic) species, but are relevant as allergens and mycotoxins producers. It is known that the exclusive use of conventional methods for fungal quantification (fungal culture) may underestimate the results due to different reasons. The incubation temperature chosen will not be the most suitable for every fungal species, resulting in the inhibition of some species and the favouring of others. Differences in fungi growth rates may also result in data underestimation, since the fungal species with higher growth rates may inhibit others species’ growth. Finally, underestimated data can result from non-viable fungal particles that may have been collected or fungal species that do not grow in the culture media used, although these species may have clinical relevance in the context. Due to these constraints occupational exposure assessment, in setings with high fungal contamination levels, should follow these steps: Apply conventional methods to obtain fungal load information (air and surfaces) regarding the most critical scenario previously selected; Guideline comparation aplying or legal requirements or suggested limits by scientific and/or technical organizations. We should also compare our results with others from the same setting (if there is any); Select the most suitable indicators for each setting and apply conventional-culture methods and also molecular tools. These methodology will ensure a more real characterization of fungal burden in each setting and, consequently, permits to identify further measures regarding assessment of fungal metabolites, and also a more adequate workers health surveillance. The methodology applied to characterize fungal burden in several occupational environments, focused in Aspergillus spp. prevalence, will be present and discussed.

Selective Mercury Sequestration from a Silver/Mercury Cyanide Solution

Silver and mercury are both dissolved in cyanide leaching and the mercury co-precipitates with silver during metal recovery. Mercury must then be removed from the silver/mercury amalgam by vaporizing the mercury in a retort, leading to environmental and health hazards. The need for retorting silver can be greatly reduced if mercury is selectively removed from leaching solutions. Theoretical calculations were carried out based on the thermodynamics of the Ag/Hg/CN- system in order to determine possible approaches to either preventing mercury dissolution, or selectively precipitating it without silver loss. Preliminary experiments were then carried out based on these calculations to determine if the reaction would be spontaneous with reasonably fast kinetics. In an attempt to stop mercury from dissolving and leaching the heap leach, the first set of experiments were to determine if selenium and mercury would form a mercury selenide under leaching conditions, lowering the amount of mercury in solution while forming a stable compound. From the results of the synthetic ore experiments with selenium, it was determined that another effect was already suppressing mercury dissolution and the effect of the selenium could not be well analyzed on the small amount of change. The effect dominating the reactions led to the second set of experiments in using silver sulfide as a selective precipitant of mercury. The next experiments were to determine if adding solutions containing mercury cyanide to un-leached silver sulfide would facilitate a precipitation reaction, putting silver in solution and precipitating mercury as mercury sulfide. Counter current flow experiments using the high selenium ore showed a 99.8% removal of mercury from solution. As compared to leaching with only cyanide, about 60% of the silver was removed per pass for the high selenium ore, and around 90% for the high mercury ore. Since silver sulfide is rather expensive to use solely as a mercury precipitant, another compound was sought which could selectively precipitate mercury and leave silver in solution. In looking for a more inexpensive selective precipitant, zinc sulfide was tested. The third set of experiments did show that zinc sulfide (as sphalerite) could be used to selectively precipitate mercury while leaving silver cyanide in solution. Parameters such as particle size, reduction potential, and amount of oxidation of the sphalerite were tested. Batch experiments worked well, showing 99.8% mercury removal with only ≈1% silver loss (starting with 930 ppb mercury, 300 ppb silver) at one hour. A continual flow process would work better for industrial applications, which was demonstrated with the filter funnel set up. Funnels with filter paper and sphalerite tested showed good mercury removal (from 31 ppb mercury and 333 ppb silver with a 87% mercury removal and 7% silver loss through one funnel). A counter current flow set up showed 100% mercury removal and under 0.1% silver loss starting with 704 ppb silver and 922 ppb mercury. The resulting sphalerite coated with mercury sulfide was also shown to be stable (not releasing mercury) under leaching tests. Use of sphalerite could be easily implemented through such means as sphalerite impregnated filter paper placed in currently existing processes. In summary, this work focuses on preventing mercury from following silver through the leaching circuit. Currently the only possible means of removing mercury is by retort, creating possible health hazards in the distillation process and in transportation and storage of the final mercury waste product. Preventing mercury from following silver in the earlier stages of the leaching process will greatly reduce the risk of mercury spills, human exposure to mercury, and possible environmental disasters. This will save mining companies millions of dollars from mercury handling and storage, projects to clean up spilled mercury, and will result in better health for those living near and working in the mines.

Comportamiento metabólico, fisiológico y electrocardiográfico en trabajadores expuestos a altas temperaturas en una empresa líder en la explotación y coquización del carbón en Boyacá, Colombia, 2016

Objetivo: Establecer la relación entre la exposición ocupacional a altas temperaturas o sobrecarga térmica con el comportamiento fisiológico, metabólico y electrocardiográfico. Métodos: estudio de corte transversal, donde se incluyeron dos grupos (expuesto y no expuesto a altas temperaturas) en una empresa minera, en el departamento de Boyacá, Colombia, en el año 2016. El número de participantes fue de 160 trabajadores del género masculino, grupo expuesto (n=86) y grupo no expuesto (n=74). La exposición ocupacional a sobrecarga térmica se evaluó con el índice de temperatura de globo y bulbo húmedo (TGBH), el comportamiento fisiológico con el índice de costo cardiaco relativo (ICCR) con mediciones de frecuencia cardiaca (FC), el comportamiento metabólico con la determinación del colesterol total (CT), colesterol de alta densidad (C-HDL), colesterol de baja densidad (C-LDL), triglicéridos (TG) y glicemia basal (GL). Las alteraciones electrocardiográficas con la toma de Electrocardiograma de 12 derivaciones. También fueron evaluadas variables antropométricas, tensión arterial, hábitos y antecedentes de enfermedad cardiovascular en ambos grupos. Resultados: incrementos significativos del ICCR (p<0.001) y la carga física (p<0.001) fueron encontrados en los trabajadores expuestos a altas temperaturas. Los índices lipídicos y glicemia, así como los antecedentes personales cardiovasculares, IMC, consumo de cigarrillo y consumo de alcohol, no mostraron significancia. El antecedente familiar de ACV (p=0.043) y el EKG alterado (p=0.011) mostraron una asociación significativa con la exposición a altas temperaturas. El modelo de regresión lineal múltiple explicó la relación entre el incremento del ICCR y la exposición a altas temperaturas (β=4,213, IC 95%: 1.57,6.85) ajustado por variables fisiológicas y electrocardiográficas. Conclusiones: La exposición ocupacional a altas temperaturas, presenta asociación con las alteraciones cardiovasculares a nivel fisiológico y electrocardiográfico, aumentando el ICCR y la carga física de trabajo (GE trabajo).

Toxicological assessment of novel green biocides for cultural heritage.

The damaging of buildings and monuments by biological contamination is a cause of serious concern. Biocides based on chemical toxic compounds have been used to mitigate this problem. However, in the past decade many of the most effective biocides have been banned due to their environmental and health hazards. Therefore, proper remediation actions for microbiologically contaminated historic materials based on environmentally safe solution is of vital importance. Bacillus species are emerging as a promising alternative for built heritage treatment. They produce a great diversity of secondary metabolites with biological activity, well known to possess antagonistic activities against many fungal pathogens. In order to evaluate the antifungal activity of the novel biocides produced in our laboratory by cultures of selected bacterial strains, liquid interaction assays using four biodeteriogenic fungi were achieved, revealing a nearly 100% of inhibitory capacity to fungal proliferation. To confirm their effective safe toxicological properties, in vivo tests using two different biological models were performed. The lyophilized supernatant of the Bacillus culture broth showed no lethality against brine shrimp and also no toxicological effects in Swiss mice through administration of acute dose of 5000 mg/kg by oral gavage. In fact, the bioactive compounds were no lethal at the tested dose unlike Preventol® (commercial biocide) that induced acute toxicity with 10 times minor concentration dose administrated in the same conditions. Therefore, the new bioactive compounds that suppress growth of biodeteriogenic fungi on historical artworks, presenting at the same time no toxicity against other living organisms, constituting an efficient and green safe solution for biodegradation/biodeterioration treatment of Cultural Heritage.

An approach to health and safety in E.U. forestry operations – Hazards and preventive measures

Forestry in general and logging in particular continue to be among the three most hazardous sectors in European countries. The aim of this article is to characterize health and safety problems and solutions in E.U. forestry operations, and particularly in Portuguese operations. Forest types, production, employment and ownership are used to characterize the forest sector. Forestry accidents and health problems data are mentioned. Typical hazards associated to the nature of logging operations are systematized. Preventive measures, focused on a wide spectrum of measures, making safety considerations an integral feature of all operational activities from planning to organization to execution and supervision of work are emphasized in this article.

Food-safety hazards in the pork chain in Nagaland, North East India: implications for human health.

Pork occupies an important place in the diet of the population of Nagaland, one of the North East Indian states. We carried out a pilot study along the pork meat production chain, from live animal to end consumer. The goal was to obtain information about the presence of selected food borne hazards in pork in order to assess the risk deriving from these hazards to the health of the local consumers and make recommendations for improving food safety. A secondary objective was to evaluate the utility of risk-based approaches to food safety in an informal food system. We investigated samples from pigs and pork sourced at slaughter in urban and rural environments, and at retail, to assess a selection of food-borne hazards. In addition, consumer exposure was characterized using information about hygiene and practices related to handling and preparing pork. A qualitative hazard characterization, exposure assessment and hazard characterization for three representative hazards or hazard proxies, namely Enterobacteriaceae, T. solium cysticercosis and antibiotic residues, is presented. Several important potential food-borne pathogens are reported for the first time including Listeria spp. and Brucella suis. This descriptive pilot study is the first risk-based assessment of food safety in Nagaland. We also characterise possible interventions to be addressed by policy makers, and supply data to inform future risk assessments.