922 resultados para Feed consumption


Relevância:

60.00% 60.00%

Publicador:

Resumo:

Abstract. The experiment was conducted to determine the effect of complete diet silage on feed consumption, body weight gain, feed conversion, water consumption and mortality. The materials used were 75 Mojosari Alabio male ducks, commercial diet plus rice bran (16.50% CP, 2900 kkal GE/kg), silage with 30-60% water content. Data were subject to Completely Randomized Design with five treatments and three replications. The treatments were S0 (commercial feed), S1 (silage with 30% water content), S2 (silage with 40% water content), S3 (silage with 50% water content) and S4 (silage with 60% water content). Data were subject to analysis of variance followed by orthogonal contrast test. The result showed that silage with 50% water content has significantly increased body weight gain and decreased water consumption, but there were no  effect in feed conversion. Complete diet silage was safe for Mojosari Alabio male duck. Key words : complete ration silage , duck, performance Abstrak. Penelitian ini untuk mengetahui pengaruh pemberian silase ransum komplit terhadap konsumsi pakan, pertambahan bobot badan, konversi pakan, konsumsi air dan persentase kematian. Bahan yang  digunakan adalah 75 ekor itik Mojosari Alabio jantan, ransum komersial ditambah dedak padi (16,50% CP, 2900 kkal GE/kg), silase dengan kadar air 30-60%. Percobaan ini menggunakan Rancangan Acak Lengkap dengan lima perlakuan dan tiga ulangan. Perlakuan S0 (pakan komersial), S1 (silase dengan kadar air 30%), S2 (silase dengan kadar air 40%), S3 (silase dengan kadar air 50%) dan S4 (silase dengan kadar air 60%). Data dianalisis menggunakan analisis ragam dan dilanjutkan dengan uji kontras orthogonal. Hasilnya menunjukkan bahwa silase dengan kadar air 50% memiliki peningkatan berat badan dan penurunan konsumsi air yang signifikan, tetapi tidak mempengaruhi konversi pakan. Silase ransum komplit pakan aman untuk itik Mojosari Alabio jantan. Kata kunci : silase ransum komplit, itik, performans

Relevância:

60.00% 60.00%

Publicador:

Resumo:

A study has been conducted to know the effect of fishmeal substitution with Squilla empusa on reproductive performance of local duck.  Randomized Completely Design was applied in this experimental. Ninety-six grower local ducks were divided into six treatments ration. Each treatment was replicated by four replications and consists of four local ducks each. The treatment was P0 = 0 % Squilla empusa and 10 % fish meal, P1 = 2 % Squilla empusa and 8 % fish meal, P2 = 4 % Squilla empusa and 6 % fish meal, P3 = 6 % Squilla empusa and 4 % fish meal, P4 = 8 % Squilla empusa and 2 % fish meal, and P5 = 10 % Squilla empusa and 0 % fishmeal.  Parameters observed was reproductive performance consisted of sexual maturity, average egg production and egg weight during 3 months of production period. The result showed that fishmeal and Squilla empusa had very significant by effect (P<0,01) on feed consumption, sexual maturity, egg production and egg weight. It was significant by (P< 0,05) on egg production and weight. It was concluded that substitution up to 4.96 % of Squilla empusa give the latest of sexual maturity (5.8 month); the lowers egg production was at 6 % Squilla empusa; at 10 % Squilla empusa egg weight tended to increase. (Animal Production 6(2): 110-117 (2004) Key Words: substitution,  Squilla empusa, reproductive performance

Relevância:

60.00% 60.00%

Publicador:

Resumo:

A research entitled “Performance of Growing Male Quails Under Different Complete Feeds and Floor Sorts” has been conducted in experimental farm, Faculty of Animal Husbandry Unsoed  Purwokerto.  The objective of the study is to find out the best floor sort and complete feed for performance of growing male quails. One hundred and fifty male quails at three weeks old were used in this study. Split Plot Design were used in this research. Floor sorts  were used as  maintreatments and they consists of L1 (litter floor) and L2 (wire floor) Complete feeds were used as subtreatment and they consists of  P1 (AD 51), P2 (CP 511), P3(B 11) and P4 (BR 1). Deck levels were used as deck  andT1 (high), T2 (meden) and T3 (low deck). Statistical analyses showed that complete feeds had significant effect (P<0.05) on feed consumption but not significant on body weight, growth and feed conversion. Floor sorts and their interaction  with the complete feeds  had not significant on the performance of the birds. It can be conclused that during growing period, P1 (AD 51) gave better performance and for floor shorts, either litter or wire can be used to growing male quails. (Animal Production 1(2): 90-98 (1999) Key Words: Quails, complete feed commercial, floor

Relevância:

60.00% 60.00%

Publicador:

Resumo:

Ninety six commercial strain were conducted from 14 to 42 days of age to evaluate the affect of utilization zeolite and on performance of broiler and fecal characteristics. Birds were divided into four  treatment diets (4 replicates of 7 birds each): K (control), KB (K+ 1% bentonite),  KZ (K+ 1% zeolite), KBZ (K+ 1% Z+ 1% B). The birds were fed initially for two weeks a commercial starter ration and followed by treatment  diets 15 to 42 days of age. All the diets were formulated to have 20% crude protein and 3000 kcal. ME and 0.91% Ca and 0.69% P for control and 0.34% treatments. Body weights and feed intakes were measured on a weekly basis. The manure from each group was sampled on weekly basis and the  moisture content, pH and ammonia production was determined. The results showed the utilization zeolite and bentonite or both significant differences (P<0.05) on pH and (P<0.01) fecal ammonia content, but not on feces water content, final body weight, feed consumption, feed conversion ratio, and carcass. (Animal Production 3(1): 1-4 (2001)

Relevância:

60.00% 60.00%

Publicador:

Resumo:

A research  has been conducted to study the effect of interaction between protein level and synthetic methionine addition in quail ration on growth rate up to 40 days. The method was used experiment with Factorial (3x3) based on CRD. The first factor was protein level (P) : P1 = 22 %, P2 = 24 %, P3 = 26 %. The second factor was methionine addition (M) : M0 = 0,00, M1 = 0,05 %, M2 = 0,10 %. Variance analysis indicated that protein level did not have significant effect (P>0.05) on feed consumption, growth rate, feed conversion, weight and percentage of carcass, but it had significant effect (P≤0.05) on IOFC. The effect of methionine addition was not significant (P> 0.05). Interaction between those treatments did not give significant effect (P>0.05). It can be concluded that the response on 26 % protein level with 0,05 % methionine addition give the highest IOFC (Rp. 342.693) (Animal Production 1(1) : 17-23 (1999). Key Words : Quail, Growing Periode, Protein Level, Synthetis Methionine.

Relevância:

60.00% 60.00%

Publicador:

Resumo:

Four female lesser mouse deer (Tragulus javanicus) were used in this study to observe their feed consumption and digestibility given alternative diets in captive.  The results showed that 125g/head/day sweet potatoes supplementation in ration increased the consumption and digestibility of dry matter intake, ash, ether extract, and N-free extract. Supplementation of commercial concentrate in lesser mouse deer’s diet decreased the digestion of dry matter, ash, crude protein, and crude fiber. Animal Production 6(1): 17-22 (2004) Key Words: Digestibility, Consumption, Alternative Diets, Tragulus javanicus

Relevância:

40.00% 40.00%

Publicador:

Resumo:

Use of manufactured feeds in aquaculture in Bangladesh has grown rapidly over the last five years. More than 1 million tonnes of commercially formulated feeds and 0.3-0.4 million tonnes of farm-made feeds were produced in 2012, and sectoral growth is projected to increase substantially over the medium term. This working paper summarizes findings from a study, conducted as part of the WorldFish/USAID “Feed the Future-Aquaculture” project in 2012, assessing the current status of the aquaculture feed sector in Bangladesh. Fish feed value chains, market trends, ingredients and formulation systems, farm feeding practices, ancillary services and feed regulations were investigated. The study identifies a number of entry points for interventions in the sector, and investments which would improve feed quality and farmer access to better feeds and support the growth of sustainable aquaculture.

Relevância:

40.00% 40.00%

Publicador:

Resumo:

The compensatory responses of juvenile gibel carp and Chinese longsnout catfish to four cycles of 1 part of a study designed to determine feeding regimes that would maximise growth rates. Both species showed compensatory growth in the re-feeding periods. The compensation was not sufficient for the deprived fish to match the growth trajectories of controls fed to satiation daily. The compensatory growth response was more clearly defined in the later cycles. The deprived fish showed hyperphagia during the 2-week periods of re-feeding and the hyperphagic response was clearer in the later cycles. The hyperphagia tended to persist for both weeks of the re-feeding period. The gibel carp showed no difference in gross growth efficiency between deprived and control fish. In the catfish, the gross growth efficiency of the deprived fish was marginally higher than that of control fish, but the efficiency varied erratically from week to week. Over the experiment, the deprived fish achieved growth rates 75-80% of those shown by control fish, although fed at a frequency of 66%. There was no evidence of growth over-compensation with the deprivation-re-feeding protocol used in this study. (C) 2004 Elsevier B.V. All rights reserved.

Relevância:

40.00% 40.00%

Publicador:

Resumo:

Individual juvenile three-spined sticklebacks Gasterosteus aculeatus and European minnow Phoxinus phoxinus, from sympatric populations, were subjected to four cycles of I week of food deprivation and 2 weeks of ad libitum feeding. Mean specific growth rate during the weeks of deprivation was negative and did not differ between species. The three-spined stickleback showed sufficient growth compensation to recover to the growth trajectory shown by control fish daily fed ad libitum. The compensation was generated by hyperphagia during the re-feeding periods, and in the last two periods of re-feeding, the gross growth efficiencies of deprived three-spined sticklebacks were greater than in control fish. The expression of the compensatory changes in growth and food consumption became clearer over the successive periods of re-feeding. The European minnow developed only a weak compensatory growth response and the mass trajectory of the deprived fish deviated more and more from the control trajectory During re-feeding periods, there were no significant differences in food consumption or gross growth efficiency between control and deprived European minnows. The differences between the two species are discussed in terms of the possible costs of compensatory growth, the control of growth and differences in feeding biology (C) 2003 The Fisheries Society of the British Isles.

Relevância:

40.00% 40.00%

Publicador:

Resumo:

Four rumen-fistulated Holstein heifers (134 +/- 1 kg initial BW) were used in a 4 x 4 Latin square design to determine the effects of delaying daily feed delivery time on intake, ruminal fermentation, behavior, and stress response. Each 3-wk experimental period was preceded by 1 wk in which all animals were fed at 0800 h. Feed bunks were cleaned at 0745 h and feed offered at 0800 h (T0, no delay), 0900 (T1), 1000 (T2), and 1100 (T3) from d1 to 21 with measurements taken during wk 1 and 3. Heifers were able to see each other at all times. Concentrate and barley straw were offered in separate compartments of the feed bunks, once daily and for ad libitum intake. Ruminal pH and saliva cortisol concentrations were measured at 0, 4, 8, and 12 h postfeeding on d 3 and 17 of each experimental period. Fecal glucocorticoid metabolites were measured on d 17. Increasing length of delay in daily feed delivery time resulted in a quadratic response in concentrate DMI (low in T1 and T2; P = 0.002), whereas straw DMI was greatest in T1 and T3 (cubic P = 0.03). Treatments affected the distribution of DMI within the day with a linear decrease observed between 0800 and 1200 h but a linear increase during nighttimes (2000 to 0800 h), whereas T1 and T2 had reduced DMI between 1200 and 1600 h (quadratic P = 0.04). Water consumption (L/d) was not affected but decreased linearly when expressed as liters per kilogram of DMI (P = 0.01). Meal length was greatest and eating rate slowest in T1 and T2 (quadratic P <= 0.001). Size of the first meal after feed delivery was reduced in T1 on d 1 (cubic P = 0.05) and decreased linearly on d 2 (P = 0.01) after change. Concentrate eating and drinking time (shortest in T1) and straw eating time (longest in T1) followed a cubic trend (P = 0.02). Time spent lying down was shortest and ruminating in standing position longest in T1 and T2. Delay of feeding time resulted in greater daily maximum salivary cortisol concentration (quadratic P = 0.04), which was greatest at 0 h in T1 and at 12 h after feeding in T2 (P < 0.05). Daily mean fecal glucocorticoid metabolites were greatest in T1 and T3 (cubic P = 0.04). Ruminal pH showed a treatment effect at wk 1 because of increased values in T1 and T3 (cubic P = 0.01). Delaying feed delivery time was not detrimental for rumen function because a stress response was triggered, which led to reduced concentrate intake, eating rate, and size of first meal, and increased straw intake. Increased salivary cortisol suggests that animal welfare is compromised.

Report drawn up on behalf of the Committeeon Agriculture on A. the proposals from the Commission of the European Communities to the Council (Doc. 1-893/83-COM(83) 548 final) for: I. a regulation amending Regulation (EEC) No. 804/68 on the common organization of the markets in milk and milk products. II. a regulation laying down general rules applying to the milk sector levy specified in Article 5(c) of Regulation (EEC) No. 804/68. III. a regulation laying down general rules applying to the milk sector levy specified in Article 5(d) of Regulation (EEC) No. 804/68. B. the proposals from the Commission of the European Communities to the Council (Doc. 1-996/83-COM(83) 611 final) for: I. a regulation amending Regulation (EEC No. 1723/81 as regards the possibility of granting aids for the use of butter in the manufacture of certain food-stuffs. II. a regulation amending Regulation (EEC) No. 1411/71 as regards the fat content of drinking milk. III. a regulation laying down general rules on the granting of aid for concentrated skimmed milk and concentrated milk for use as animal feed. IV. a regulation amending Regulation (EEC) No. 1269/79 with regard to the terms for the disposal of butter at a reduced price for direct consumption. C. the proposal from the Commission of the European Communities to the Council (Doc. 1-1113/83)-COM(83) 644 final) for a regulation amending Regulations (EEC) No. 1078/77 introducing a system of premiums for the non-marketing of milk and milk products and for the conversion of dairy herds.

Relevância:

40.00% 40.00%

Publicador:

Relevância:

40.00% 40.00%

Publicador:

Resumo:

[pt. 1.] January 29, May 13 and 15, 1953. 165 p.--pt. 2. October 8 and 9, 1953 - Minneapolis, Minn., October 13 and 14, 1953 - Galveston, Tex. pp. 167-545.

Relevância:

30.00% 30.00%

Publicador:

Resumo:

MOST PAN stages in Australian factories use only five or six batch pans for the high grade massecuite production and operate these in a fairly rigid repeating production schedule. It is common that some of the pans are of large dropping capacity e.g. 150 to 240 t. Because of the relatively small number and large sizes of the pans, steam consumption varies widely through the schedule, often by ±30% about the mean value. Large fluctuations in steam consumption have implications for the steam generation/condensate management of the factory and the evaporators when bleed vapour is used. One of the objectives of a project to develop a supervisory control system for a pan stage is to (a) reduce the average steam consumption and (b) reduce the variation in the steam consumption. The operation of each of the high grade pans within the schedule at Macknade Mill was analysed to determine the idle (or buffer) time, time allocations for essential but unproductive operations (e.g. pan turn round, charging, slow ramping up of steam rates on pan start etc.), and productive time i.e. the time during boil-on of liquor and molasses feed. Empirical models were developed for each high grade pan on the stage to define the interdependence of the production rate and the evaporation rate for the different phases of each pan’s cycle. The data were analysed in a spreadsheet model to try to reduce and smooth the total steam consumption. This paper reports on the methodology developed in the model and the results of the investigations for the pan stage at Macknade Mill. It was found that the operation of the schedule severely restricted the ability to reduce the average steam consumption and smooth the steam flows. While longer cycle times provide increased flexibility the steam consumption profile was changed only slightly. The ability to cut massecuite on the run among pans, or the use of a high grade seed vessel, would assist in reducing the average steam consumption and the magnitude of the variations in steam flow.

Relevância:

30.00% 30.00%

Publicador:

Resumo:

Industrial ecology is an important field of sustainability science. It can be applied to study environmental problems in a policy relevant manner. Industrial ecology uses ecosystem analogy; it aims at closing the loop of materials and substances and at the same time reducing resource consumption and environmental emissions. Emissions from human activities are related to human interference in material cycles. Carbon (C), nitrogen (N) and phosphorus (P) are essential elements for all living organisms, but in excess have negative environmental impacts, such as climate change (CO2, CH4 N2O), acidification (NOx) and eutrophication (N, P). Several indirect macro-level drivers affect emissions change. Population and affluence (GDP/capita) often act as upward drivers for emissions. Technology, as emissions per service used, and consumption, as economic intensity of use, may act as drivers resulting in a reduction in emissions. In addition, the development of country-specific emissions is affected by international trade. The aim of this study was to analyse changes in emissions as affected by macro-level drivers in different European case studies. ImPACT decomposition analysis (IPAT identity) was applied as a method in papers I III. The macro-level perspective was applied to evaluate CO2 emission reduction targets (paper II) and the sharing of greenhouse gas emission reduction targets (paper IV) in the European Union (EU27) up to the year 2020. Data for the study were mainly gathered from official statistics. In all cases, the results were discussed from an environmental policy perspective. The development of nitrogen oxide (NOx) emissions was analysed in the Finnish energy sector during a long time period, 1950 2003 (paper I). Finnish emissions of NOx began to decrease in the 1980s as the progress in technology in terms of NOx/energy curbed the impact of the growth in affluence and population. Carbon dioxide (CO2) emissions related to energy use during 1993 2004 (paper II) were analysed by country and region within the European Union. Considering energy-based CO2 emissions in the European Union, dematerialization and decarbonisation did occur, but not sufficiently to offset population growth and the rapidly increasing affluence during 1993 2004. The development of nitrogen and phosphorus load from aquaculture in relation to salmonid consumption in Finland during 1980 2007 was examined, including international trade in the analysis (paper III). A regional environmental issue, eutrophication of the Baltic Sea, and a marginal, yet locally important source of nutrients was used as a case. Nutrient emissions from Finnish aquaculture decreased from the 1990s onwards: although population, affluence and salmonid consumption steadily increased, aquaculture technology improved and the relative share of imported salmonids increased. According to the sustainability challenge in industrial ecology, the environmental impact of the growing population size and affluence should be compensated by improvements in technology (emissions/service used) and with dematerialisation. In the studied cases, the emission intensity of energy production could be lowered for NOx by cleaning the exhaust gases. Reorganization of the structure of energy production as well as technological innovations will be essential in lowering the emissions of both CO2 and NOx. Regarding the intensity of energy use, making the combustion of fuels more efficient and reducing energy use are essential. In reducing nutrient emissions from Finnish aquaculture to the Baltic Sea (paper III) through technology, limits of biological and physical properties of cultured fish, among others, will eventually be faced. Regarding consumption, salmonids are preferred to many other protein sources. Regarding trade, increasing the proportion of imports will outsource the impacts. Besides improving technology and dematerialization, other viewpoints may also be needed. Reducing the total amount of nutrients cycling in energy systems and eventually contributing to NOx emissions needs to be emphasized. Considering aquaculture emissions, nutrient cycles can be partly closed through using local fish as feed replacing imported feed. In particular, the reduction of CO2 emissions in the future is a very challenging task when considering the necessary rates of dematerialisation and decarbonisation (paper II). Climate change mitigation may have to focus on other greenhouse gases than CO2 and on the potential role of biomass as a carbon sink, among others. The global population is growing and scaling up the environmental impact. Population issues and growing affluence must be considered when discussing emission reductions. Climate policy has only very recently had an influence on emissions, and strong actions are now called for climate change mitigation. Environmental policies in general must cover all the regions related to production and impacts in order to avoid outsourcing of emissions and leakage effects. The macro-level drivers affecting changes in emissions can be identified with the ImPACT framework. Statistics for generally known macro-indicators are currently relatively well available for different countries, and the method is transparent. In the papers included in this study, a similar method was successfully applied in different types of case studies. Using transparent macro-level figures and a simple top-down approach are also appropriate in evaluating and setting international emission reduction targets, as demonstrated in papers II and IV. The projected rates of population and affluence growth are especially worth consideration in setting targets. However, sensitivities in calculations must be carefully acknowledged. In the basic form of the ImPACT model, the economic intensity of consumption and emission intensity of use are included. In seeking to examine consumption but also international trade in more detail, imports were included in paper III. This example demonstrates well how outsourcing of production influences domestic emissions. Country-specific production-based emissions have often been used in similar decomposition analyses. Nevertheless, trade-related issues must not be ignored.